December 9, 2024
PUSH BOATS FOR SALE
For additional information please contact Anthony Iorio at Tel (516) 536 7375 - rigs@sunmachinery.com
400 HP LUGGER TUG (Ref#3662b)
42’ x 16’ x 5’, 21’ eye level, main engines: (2) 671 Detroit diesels, 371 Detroit diesel generator, 1500 gallon fuel capacity, (2) 700 gal poly water tanks, (1) 250 gallon poly water tank, push knees, 3 decks: 1st deck galley, head and shower, 2nd deck bunk room with 2 bunks, 3rd deck pilot house. Deck is aft, cabin and pilot house stern, not used for years, needs cleaning up and decks need some work, engines run, located Florida Price: $65,000
450 HP TWIN SCREW PUSH BOAT (Ref#4098)
Built 2005, 44’ x 14.5’ x 6’, 25 GRT, GM671 engines, twin disc reduction gears 3.5:1, kort nozzles, no bathroom or kitchen, excellent condition Price: $300,000
500 HP TRUCKABLE TUG (Ref#3760a)
Built 1997, 26 GT, 26’8” LOA x 14’2” beam, 3’6” draft, 13’1” eye height at 4’ draft, 19’9” air draft at 4’ draft, 500 gal fuel oil capacity, John Deere 6069 TFM, Twin disc MG5061 reduction gears Bareboat Charter Price: $10,000 per month
600 HP LUGGER TUG (Ref#3868)
Built 1980, 60' x 22’, main engines (2) GM 8V71, twin disc 4.5:1, pushknees, 3 levelings, bunks, head, galley, reworked, located Louisiana Price: $210,000
600 HP PUSH BOAT (Ref#3900)
Built 1971, 50’ x 20’ x 5.5’ draft, elevated pilot house 27’ eye level, (2) Detroit 8V71 diesel engine, Kubota 34 kw generator, 3500 gal fuel capacity, lower cabin (2) bunks, canteen, shower, pilot house 1 bunk, located Louisiana Price: $125,000
800 HP PUSHBOAT (Ref#4002)
Built 1966, 50 x 20, push knees, (2) Detroit GM 12V71 Detroit diesel engines, (2) Twin disc reduction gears 4.5:1, push knees, 3 decks plus pilot house, just out of service, good condition, located Louisiana Price: $225,000
800 HP TWIN SCREW PUSHBOAT (Ref#3263)
Built 1974. 55.5' x 22' x 8.1'. GT 66, NT 53. Main engines: (2) Detroit 12V71 diesels. TwinDisc MG 514C 6:1. Keel cooled. Fuel capacity: 8,500 gal. Water capacity: 1,500 gal. Full galley. Electronics, communication, navigation. Located Louisiana. Needs work. Price: $60,000
800 HP PUSHBOAT (Ref#3889)
Built 1966, Rebuilt 1983, 60’ x 22’ x 5’ draft, 26’ eye level, (2) GM 12V71 Detroit engines, Twin disk gears 6:1 ratio, John Deere generator, no flanking rudders, no galley, no bunks, 8000 gal fuel capacity, toilet, sewage system, currently working, located Midwest Price: $95,000 PRICE REDUCED: $85,000
900 HP LUGGER TUG (Ref#3862)
Built 1982, 65’ x 24’ x 9’ depth, 6’6” operating draft, 18’ eye level, 24 x 22 deck space, (2) John Deere 6125 main engines, (2) generators GM 371, twin disc 514 6:1 gears, 60” x 44” wheels, hydraulic steering, 10,000 gal fuel capacity, 20,000 gal potable water capacity, 200 gal lube oil capacity, communication and navigation equipment, located Louisiana Price: $525,000
900 HP TWIN SCREW PUSH BOAT (Ref#3246a)
Built 1969, refurbished 2024, 47' x 18' x 6'. GT 50, NT 34. Eye level 18'. Main engines: MT855. Capacities: Fuel 5,000 gal, Potable water 3,500 gal., new bottom, all new electrics, new 40 ton winches, blasted and painted, current COI, located Louisiana. Price: $1,050,000
800 HP TWIN SCREW PUSHBOAT (Ref#3771)
Built 1963, 50’ x 18’, (2) Cummins NTA 855M engines, Twin disc 4.5:1 gears, 4 flanking and 2 steering rudders, low hours on engines, spare gear wheel and engines included. Subchapter M, 80% of hull renewed and coal tar epoxied in 2010, located Kentucky Price: $225,000
1000 HP PUSHBOAT (Ref#3833c) Built 2009, 55’ x 20’ x 8’ depth, main engines: (2) Mitsubishi S6A3-Y2MPTK-3 (8931 hours port, 9208 hours starboard), Twin Disc MG516 reduction gears 5.05:1 ratio, generator with Cummins 4B engine, 4 blade 56” x 47” props, 5,466 gal fuel capacity, 4 crew, 73 GT, located Texas Price: $1,050,000
1000 HP PUSHBOAT (Ref#3833b) Built 1999, 65’ x 24’ x 10.5’ depth, main engines: (2) Cummins KTA19M2 (15,745 hours port, 15,768 hours starboard), Reintjes WAF364 reduction gears 6.048:1 ratio, generator with 6BTA Cummins, 4 blade 64” x 52” props, 13,000 gal fuel capacity, 5 crew, 109 GT, located Texas Price: $1,550,000
1700 HP PUSHBOAT (Ref#3833a) Built 1996, 72’ x 26’ x 10’ depth, main engines: (2) Cummins KTA38 (20,350 hours port, 20,320 starboard), Reintjes WAF562 reduction gear 5.947:1, generator with Cummins 6BTA engine, 21,000 gal fuel capacity, 6 crew, 125 GT, 4 blade 74” x 54” props, located Louisiana. Price: $1,900,000
710 HP PUSH BOAT (Ref#3952)
Built 2014, 39' x 14' x 9.7' depth, 4' draft, 44GT, 35 NT, height of eye 10' pilot house, 20' tower, main engine: Cummins QSM-11, Marine Gear ZF ratio 2.933:1, electric/hydraulic steering, 9 knots speed, 870 gal fuel capacity, 20 gal lube oil capacity, new starboard engine February 2023, current COI, survey available, operating Northeast US Price: $450,000
800 HP PUSHBOAT (Ref#4028)
Built 1981, 55’ x 24’ x 8’, (2) 12V71 Detroit diesels, twin disc MG-541 7.0:1 gear ratio, hydraulic reverse/reduction gears, fresh water cooled with keel cooler, (2) 30 kw generators, (2) air compressors, sewage disposal system, ventilation system, 8000 gallon fuel capacity, 3000 gallon potable water capacity, 104 GT, 73 NT, pushknees, sleeping accommodations for 5, galley, in drydock June 2023 and found to be in excellent condition, located Louisiana Price: $575,000
900 HP PUSH BOAT (Ref#3829)
Built 1998, 60’ x 14’ x 5’, COI expires 2023, John Deere Tier II diesel engine with 4000 hours, 37 GT, 30 NT, 17’ eye level, Isuzu 21kw generator, Kubota 5 kw generator, electronics and controls, operating in Northeast USA. Buy now with delivery in one month (must be replaced) Price: $300,000
800 HP PUSHBOAT (Ref#3749a)
Built 1978, 52’ x 22 x 5’6” light draft, 6’6” loaded draft, , raised pilothouse, distance to top of pilot house 31’6”, 25’ eye level, (2) Detroit 12V71 diesel engines, (2) 514 twin dick gears, (2) 371 Detroit generators 30 kw, (2) air compressors (air start engines), 6700 gal fuel capacity, keel cooled, (2) flanking rudders, wheels are 60 x 36, and the winches are electric over hydraulic, communication and control equipment, head, shower, galley, one cabin with 4 bunks, located Illinois, COI expired Price: $125,000
900 HP TWIN SCREW LUGGER TUG (Ref#3530)
Built 1993. 60' x 20' x 9'. Operating draft: 6'. Eye level 19'. Deck space: 18' x 18'. GT 68, NT 54. Main engines: (2) GM 8V-92s, TwinDisc MG514 5:1, 50" x 40" wheels. Hydraulic steering. Speed: 10mph. Generators: (2) Isuzu-4JG1T & GM 2-71. Capacities: Fuel 10,000 gal, potable water 10,000 gal, lube oil 55 gal. Navigation, electronics, communications. Located Louisiana. Price: $325,000
900 HP PUSHBOAT (Ref#3777)
Built 1967, COI, rehulled and repowered in 2011, 26’ eye level, (2) Cat C18 main engines, twin disc gears 3:1 ratio, John Deere generator, ½” bow plating, 5/8” plating propeller area, remaining plating 3/8”, has $1.1million in boat, located Illinois Price: $800,000
900 HP PUSHBOAT (Ref#3146)
Built 1974. 60' x 24' x 7', actual draft 5’6” – 6’, Steel hull. GT 86, NT 58. Main engines: was originally (3) Cat C12s with 514 clutches 4.5:1., (one engine was removed), used in fresh water, currently a day boat, company was in the process of converting to an overnight boat, work that needs to be done: currently two bunks in place, no galley, partial plumbing done for toilet and shower, anticipated conversion cost $20,000, owned by a major company who had excellent preventative maintenance system in place, located US Gulf. Price: $325,000
1200 HP PUSHBOAT (Ref#4067)
Built 1982, 60’ x 26’ x 9.8, air draft 44’ @ 8’ draft, 8’ operating draft, 44’ highest fixed point (mast pole), repowered 2017, (2) Cat 3412 engines, twin disc reduction gears 7:1, (2) John Deere 60 kw generators, 17,500 gal fuel capacity, 1000 gal potable water capacity, 160 gal compressed air capacity, 220 gal lube oil capacity, 125 gal bilge/slop capacity, 141 GT, 95 NT, Nabrico 40 ton deck winch, no COI, last drydock 2018, located Texas Price: $500,000
1200 HP PUSHBOAT (Ref#4123a)
Built 1980, 60’ x 26’ x 9.4’, 28’ eye level, (2) Cummins KTA-19M3, Twin Disc MG516 reduction gear 6.1:1, (2) Detroit 471 generators, 13,800 gal fuel capacity, located Louisiana Price: $800,000
1200 HP TWIN SCREW PUSHBOAT (Ref#3070)
Built 1977, 51’ x 22’ x 8.6", NT 56, GT 83. Main engines: (2) 600HP KTA-1150 Cummins diesels w/ Twin Disk MG-521 4.087:1, (2) 40kw Generators powered by 371 Detroit diesels. No flanking rudders. 3 deck levels. Tow knees. 8000 gallon fuel tanks, 180 gallon lube oil tank, 5000 gal water tanks. Accommodations: 6 bunks. Navigations, electronic, communication equipment, firefighting equipment. Blasted and painted. New rub rail. Fuel tank cleaned. New injectors on engine. Excellent hull. Not used for two years. Approx cost to get COI $15,000. Located Alabama. Price: $275,000
1200 HP PUSH BOAT (Ref#3714)
Built 1980, 62’ x 24’ x 8.7’, 6’ draft, (2) Cummins KTA 19 engines (600 hp each), (2) driving rudders aft of the propellers, (2) 4-blade propellers (High DAR), (2) Kohler 40 kw generators, telescoping wheelhouse, fire alarm system, engine alarm system, general alarm system, emergency lighting on all levels, COI, located New York, survey available Price: $625,000
1450 HP PUSH BOAT (Ref#2897)
Hull built 1980, 60’ x 25’, (2) new Cat 3412 engines will be installed, twin disc 7:1 gears (newly rebuilt), 2 steering rudders, 2 flanking rudders, approx. 30’ eye level, (2) 30kw 371 generators refurbished with new wiring, piping replaced, new wood work, shafting and bearings new. Steel hull, aluminum cabins, 2 heads, 2 bunkrooms, large galley, fleet deck, 1000 watt Zenon, 1000 watt incandescent search light. Vessel is 90% complete. Price as is: $850,000 Price completed: $1,150,000
1700 HP TUGBOAT (Ref#3822)
Built 1965, Sub M Expired 8-20-23, drydocked Mid 2021, 90’ x 27’ x 10.6, main engines: (2) Cat D398B 900hp each (11000 hours since full overhaul), (2) 60kw GM 671 generators, 127 GT, 86 NT, fuel capacity 42,000 gallons, water capacity 2500 gallons, lube oil capacity 625 gallons, Markey TYS-32D double head single drum hydraulic winch 800’ x 1.75” wire, powered by 4 cylinder Detroit, bow thruster, 10,000# crane, accommodations 7 berths, head/shower, galley, located Northwest USA Price: $700,000
1800 HP PUSHBOAT (Ref#4124)
Built 1969, 70’ x 26’ x 8’6”, 7’6” draft, 32’ eye level, main engines: (2) Cat 3508, Twin disc MG540 gears, 6.18:1 ratio, 72” x 53” props, 13,000 gal fuel capacity, will be sold with ABS documentation, located US Gulf Price: $425,000
1800 HP TWIN SCREW PUSH BOAT (Ref#4201)
Built 1966, 71’ x 24’ x 10.2’, normal draft topped off 9’6”, 24’9” eye level, highest fixed point 35’4”, main engines: (2) Cummins KTA38-MO diesel engines, flanking rudders, 18,243 gal fuel capacity, 536 gal lube capacity, 2,398 potable water capacity, Current COI, located East Coast US Price: $925,000
2000 HP PUSHBOAT/CATAMARAN (Ref#3802)
Built 1971, repowered 2013 with Cummins KT38-M1 engines, twin disc 6:1 gears, 80’ x 32’, raised pilot house, located Louisiana Price: $1,450,000
2000 HP PUSHBOAT (Ref#3745)
Built 1976, Refurbished 2013, 66’ x 24’ x 9’6”, 158 GT, 108 NT, 32’ eye level, main engines: (2) Mitsubishi S12A2-Y2MPTK Twin Disc MGH540, 10 knots speed, (2) 45 kw John Deere generators, (2) 40 Ton Nabrico electric winches, 10 hp fire pump, 26,000 gal fuel capacity, 10,000 gl water capacity, lube oil (2) tanks 1 holds 300 gal, 1 holds 150 gal, 3 staterooms, 1.5 bathes, galley, flanking rudders, reworked engines, real clean engine room, boat clean throughout, COI, COD, Sub M Price: $1,250,000
2000 HP PUSHBOAT (Ref#4025a)
Built 1976, rebuilt 1992, rebuilt 2015, 70’ x 24’, main engines: (2) Cat C32, Fabick reduction gears 6:1 ratio, stainless steel shafts and propellers, cutlass bearings, John Deere generators, Murphy engine alarms, hydraulic steering system, 16000 gal fuel capacity, Wintech 40 ton winches with 7/8 wire, galley, communication and navigation equipment, Edwards E-FSC fire panel, located Midwest Price: $1,900,000
2000 HP PUSHBOAT (Ref#3680)
Built 1975, Recently rebuilt 2020, 70’ x 28’ x 10’5”, COD expires 6-2021, COI explires 4-2-2025, Cummins K-38-MO diesel engines 1000 hp each, ratio 6:1, one engine replaced 2019 and one replaced 2020, 193 GT, 131 NT, (2) John Deere generators 4045 installed new 2015, drydock 2020, spent $400,000 to rework including new engine air filters, air ducts and exhaust pipes, steel work, replaced shafts in main rudders and flanking rudders, fabricate 4 rudder tubs, new rudder bushings, new anodes, repair to tail shafts, new cutlass bearings, remove and reinstall port and starboard tailshafts and wheels, alignment of gears to shafts, rework steering, minor hull repair, clean condition, located Louisiana Price: $1,400,000
2000 HP PUSHBOAT (Ref#1560)
Built 1975, Rebuilt 2008, 78’ x 26’ x 9’7”, Draft 7’5", Eye level 35', Three screw, 3 Cummins QSK19 Diesel engines installed in 2008, 2 new John Deere Generators 40KW diesel powered, Accomodations: 4 rooms, Currently being rebuilt and upgraded with (3) brand new Cummins 25K (750 hp each) engines, 3 brand new mufflers and new wheel, Dryrocked 2024, current COI Price: $2,100,000
2200 HP HARBOR TUG (Ref#3734)
(2) available. Built 1976,1977. Inland tugs, coastal with good weather. Dims 28.43 x 9.12 m – draft 4.25 m, Displacement 340 tons. 2 x ABC 6 MDZC , each 1.100 hp at 1.000 rpm coupled to to 2 VS. Bollard Pull 24 tons – only towing hook. Generators Baudouin and Sisu. Capacities fuel 40 cbm, FW 6 cbm and Luboil 400 L – foamtank 13.00 0 cbm. Two Fifi Monitors with730 cbm/hr Stork pump, Speed 12 knots. Well maintained, ex government, location Europe Price: $200,000 each
2400 HP PUSH BOAT (Ref#3947)
Built 1969, repowered 2002, 80’ x 30’ x 9.5’, height 38’, (2) Cat 3512 diesel engines, ZF reduction gears ratio 3.949:1, GT 150 reg C or D, NT 102 Reg C or D, COD expires August 2023, COI expires November 2024, located Louisiana Price: $2,100,000
2650 BHP TUG BOAT (Ref#3743)
Built 1975, 81’ x 28 x 11.7 hull depth, repowered 2008 with (2) Tier II Cummins QSK38 diesel engines (rated 2800 hp), (2) stainless steel fixed pitch propellers, mounted in kort nozzles, 125 GT, 85 NT, towing winch, ABS Special 5 year ABS loadline valid to October 2025, Sub M Compliant COI, currently operating in Northeast US. In 2022 the vessel was drydocked and over a million dollars was spent on improvements. New twin disc 560 gears were added, priced at $336,000 each, with a total cost of $800,000 with installation, steelwork was done as requires, together with any other necessary maintenance Price: $2,100,000
4500 HP OCEAN GOING TUG BOAT (Ref#3811a)
Built 1984, 112’ x 32’, (2) Alco 12-152C main engines (rebuilt 2022), Negata twin dsic reduction gears, Kort nozzles, Sperry steering, 4.9:1 high gear ratio, 4.4:1 low gear ratio, 12 knots speed free, (2) 75kw GM 671 generators, Intercon D/D tow winch with GM 671 engine 2000’ x 2” wire tow side capacity, 2000’ x 2” wire anchor side capacity, Intercon stern rollers, 225’-16 cir double nylon shock line, 120’ x 1001/2” 6 x 25 IWRC pennants, 55 ton shafety shackles, 134,790 gal fuel capacity, 1,880 gal lube capacity, 15,570 gal potable water capacity, 9 berths, 2 heads, 2 showers, 5 crew, safety equipment, navigation equipment, 196 GT, 133 NT, laid up status Price: $1,600,000
3900 HP OCEAN GOING TUG BOAT (Ref#3811b)
Built 1973, 110’ x 32’, 16’ max draft, 12’ min draft, (2) EMC 16-645-E2 main engines, Reinjens reductions gears, Kort nozzles, Sperry steering, 3.5:1 gear ratio, 88x5 x 96 wheel size, Wabsco engine controls, 13.5 knots free speed, (2) 75 kw GM 671 generators, Intercon D/D tow winch with GM 671 engine 2000’ x 2” wire tow side capacity, 2000’ x 2” wire anchor side capacity, Intercon stern rollers, 225’-16 cir double nylon shock line, 120’ x 1001/2” 6 x 25 IWRC pennants, 55 ton shafety shackles, 68,750 gal fuel capacity, 983 gal lube capacity, 25,000 gal potable water capacity, 6 berths, 2 heads, 2 showers, 5 crew, safety equipment, Navigation equipment, laid up Price: $1,600,000
3000 HP OCEAN GOING TUG BOAT (Ref#3811c)
Built 1976, 125.6’ x 34’, 17’ max draft, 13’ min draft, (2) EMC 12-645-E6 main engines, Reinjens reduction gears, Kort nozzles, Sperry steering, 4.95:1 gear ratio, 102” x 116” wheel size, 12 knots free speed, (2) 75 kw GM 671 generators, Intercon D/D tow winch with GM 671 engine 2000’ x 2” wire tow side capacity, 2000’ x 2” wire anchor side capacity, Intercon stern rollers, 225’-16 cir double nylon shock line, 100’ x 1-1/2” 6 x 25 IWRC pennants, 55 ton shafety shackles, 107,000 gal fuel capacity, 1400 gal lube capacity, 13,700 gal potable water capacity, 9 berths, 2 heads, 2 showers, 5 crew, safety equipment, navigation equipment, laid up Price: $1,600,000
3000 HP OCEAN GOING TUG BOAT (Ref#3811d)
Built 1979, 118’ x 34’, 16’ max draft, 14’ min draft, (2) EMC 12-645-E6 main engines, Reinjens reduction gears, Kort nozzles, Sperry steering, 5:1 gear ratio, 102” x 120” wheel size, American Standard engine congrols, 10.5 knots free speed, (2) 75 kw GM 671 generators, Intercon D/D tow winch with GM 671 engine 2000’ x 2” wire tow side capacity, 2000’ x 2” wire anchor side capacity, Intercon stern rollers, 225’-16 cir double nylon shock line, 90’ x 1-1/2” 6 x 25 IWRC pennants, 55 ton shafety shackles, 99,700 gal fuel capacity, 1230 gal lube capacity, 20,000 gal potable water capacity 7 berths, 2 heads, 2 showers, 5 crew, safety equipment, navigation equipment, laid up Price: $1,600,000
4000 HP TUGBOAT (Ref#3675)
Built 1977 in Spain, upgraded in 1998, 110’ x 29’ x 16’, BV+Hull+MACH tug, unrestricted navigation, 290 GT. Main engines: (2) C 3516 DITA 2000 hp each installed 1998, Generator Cat 3304 105kva, Cat 3306 175 kva, propulsion one pitch propeller in Tow Master Nozzle 5 rudder,48 ton BP, 2 drum towing winch, 65T towing hook NWL tested load to 80T, deck crane, accommodations for 13, located Europe Price: $250,000