Driltech DH1,  D60K, T1000, Marlin 5, Marlin 4, TM40, C40K, D40K(2H), D25

 

Last Updated: 09/21/2017 10:58 AM

 

DRILTECH 60K T II L  (Ref#1641N)  Manufactured 1985, Completely rebuilt 2002 (only 100 hours since rebuild), 1250/100 air compressor, Cat 3408 KITA diesel engine on deck (354 kilowatts), power to push 60,000@ (27,240 kg), tractive power 35,000# (15,890 kg), feeding rate 0 – 60 fpm, rate of lifting 0 – 115 fpm, beat 34’, change casing, rods 27-1/2” (standard), rotation system hydraulic type transmission, 0 – 106 speed, feeder system rod carousel, water injection, 3 leveling jacks, (3) rods 7-5/8” – 9.6m, (1) trione 9-7/8”, 1 adapter, tricones of 1000mm (stem/tricone), mounted on Federal Motors 8 x 4 truck, front axle 40,000 lbs (18,160 kg), rear axle (tndem) 80,000 lbs (36,320 kg), powered by Cat 3406B DIT diesel engine.  Price:  €350,000 (Euros)

 

DRILTECH MARLIN 5  (Ref#3395N)  Manufactured 2007, approx 1000 hours (May 2014), 1050/350 air compressor, mounted on International truck with 565 Cummins engine, sliding top head, 20 gal Bean water injection, helper’s controls, pipe rack, 260’ of 4-1/2” x 20’ drill pipe  Price:  $450,000 

 

DRILTECH MARLIN 4  (Ref#4656N)  Manufactured 2003, 300/200 psi Sullair compressor, 5 x 6 Gardner Denver mud pump, 9 gal Bean pump, 10 gal electric oiler, dual motor top head, 18” rotary table, 12,000# winch, pipe rack, rod loader, hydraulic breakout wrench, air operating sliding fork, mounted on International 7400 Series truck with 300 hp DT 530A diesel engine, 7 sp transmission, air brakes, PTO, 4 30” hydraulic jacks, dual fuel tanks, 6” hammer, hammer holder, (2) 48” toolboxes, sub saver, 300’ of 2-7/8” pipe  Price:  $265,000  PRICE REDUCED:  $220,000

 

DRILTECH D40K (Ref#15449R) Manufactured 2000, Cat deck engine, mounted on Sterling with Cat C12 engine, Sullair 1170/350 air compressor, water injection, carousel, hammer oiler  Price:  $275,000 OFF MARKET

 

DRILTECH D40K  (Ref#3967T)  Manufactured 1991, 1000/350 air compressor, 3408 Cat diesel deck engine (rebuilt with 1600 hours), mounted on 1991 International truck with International engine, 35 gpm water injection, no carousel, no mud pump, 4 hyd leveling jacks, 725’ of 4-1/2” x 20’ drill pipe, recently painted  Price:  $210,000

 

DRILTECH D40K (Ref#5280RA) Manufactured 1978, Cat 3406 deck engine, mounted on CCC with Cat 3208 engine, 750/300 Sullair compressor, 40000# pullback, 6+6 carousel, water injection, line oiler, 3 hydraulic leveling jacks, 300’ of 4 ½” x 20’ drill pipe, hammers, bits, stabilizers, etc, one owner rig, well maintained  Price:  $140,000

 

DRILTECH D40K  (Ref#7529R)  Manufactured 1977, 750/150 air compressor (new with less than 1000 hours), Rebuilt Cat deck engine (only 10 hours), mounted on Crane Carrier, brand new transmission, Atlas 2000 casing hammer  Price:  $85,000

 

DRILTECH D40K  (Ref#3210R)  Manufactured 1977, 750/250 air compressor, 5 x 6 Garnder Denver mud pump, Cat 3406 diesel deck engine (rebuilt), 10 gpm water injection, mounted on Crane Carrier with Cummins 350 diesel engine, recently rebuit top drive on hydraulic pump  Price:  $250,000

 

DRILTECH D40K (Ref#9236RB) Cat 6 cyl deck engine, mounted on CCC with Cat engine, 750/100 air compressor, no mud, line oiler, water injection, 1 front & 2 rear hydraulic leveling jacks, 320’ of 4 ½” x 25’ drill pipe (3 ½” reg conn)  Price on Request

 

DRILTECK D40K DERRICK  (Ref#3810R)  Price on Request

 

DRILTECH S35KW  (Ref#2432N)  Manufactured 1989, 840/350 Sullair compressor (rebuilt 1996), 40’ x 36,000# hydraulically raised mast, 28’ stroke of head, Cat 3406 diesel engine on deck (remanufactured), mounted on Ford 8000 tandem axle truck with Cat diesel engine, 4 hydraulic leveling jacks, 20 gpm Bean water injection pump (rebuilt), recore radiator, new hydrauluic valve bodies, hammer oiler, table bushings, 500’ of 4-1/2” x 20’ drill pipe, dimensions/weight:  40’ long x 8’ wide x 13’ high – 64,000#    Price:  $225,000  PRICE REDUCED:  $165,000

 

SANDVIK DRILTECH T25K5W (Ref#14174Ra) Manufactured 2007, Cat C15 deck engine, mounted on Sterling LT9500 with Cat C13 engine, 1150/350 air compressor, excellent condition, low hours, stored inside  Price:  $395,000

Pipe available at extra cost

  

DRILTECH T25K5W  (Ref#12999R)  Manufactured 2006, only 5000 hours, 1000/350 Sullair compressor, dual air intake system, Cat C15 (525 hp) deck engine, 0-89 high torque head, 72,600 in/lb torque, down pressure 20,5000#, 30,000# holdback, mounted on 2007 Sterling Chassis LT9500, (30) 3-1/2” x 20’ pipe  Price:  €265,000 Euros

 

DRILTECH D25  (Ref#2373T)  Manufactured 2005, Cat C15 engine, mounted on 2004 Sterling truck with 410 hp Mercedes engine, 30,000 miles on truck, 1000/350 air compressor (completely rebuilt with 1000 hours), brand new chains, 36’ mast, 30,000# pullback, 6 rod carousel, Wilden M15 mud pump, 20 gpm water injection, Price:  $300,000  PRICE REDUCED FOR RIG ONLY:  $245,000

Available as a package with 1200’ drill pipe (600’ is aluminum), 6” and 8” hammer, 2000 Sterling Service Truck with 1800 gallon Flatwater tank and 5000# crae (both brand new in 2012)  PACKAGE PRICE:  $325,000

 

DRILTECH T25K5W  (Ref#1706T)  Manufactured 2002, only 3900 original hours, 1000/350 Sullair compressor, Cat 3406E (520 hp) deck engine, 7,260# high torque head, 30,000# pullback, 20,000# down pressure, 8,000# winch, 7 rod carousel (set up for 4” pipe), rod box, 20 gpm water injection, 10 gpm lubricator, 4 leveling jack, mounted on Sterling 9513 tandem axle truck with Cat C12 (355 hp) engine, complete with 620’ of 4” x 20’ drill pipe  Price:  $275,000

 

DRILTECH T25K (Ref#11654R) Manufactured 2001, mounted on 2001 Sterling, 900/350 air compressor, water injection, 400’ of 20’ drill pipe, good condition, ready to go  Price on requestT

 

DRILTECH T25K5W  (Ref#2186Ra)  Manufactured 2000, 1000/350 Sullair air compressor (rebuilt May 2008), Cat 3406E deck engine (remanufactured 2006, engine had 6,020 hours when remanufactured), 8,100 hours (3/13), hydraulic carousel rod pan w/420’ drill steel, Bean water injection pump, mounted on 1999 Ford Sterling 9513 truck with 355 hp Cat C12 engine and Fuller 10 speed RTO-14908LL transmission, Jake brake, 43,400 miles  Price:  $210,000

 

DRILTECH D25K  (Ref#9009R)  Manufactured 2000, 1000/350 air compressor (3250 hours), 5 x 6 air driven mud pump, Cat 3406 deck engine (6700 hours), mounted on 2000 Sterling truck with Cat C12 (370 hp), 38,861 miles (Sept 2014), 6 rod carousel, 6000# winch, 18 gpm Bean injection pump, completely rebuilt, excellent condition.  300’ of 4-1/2” x 20’ (3-1/2 Reg.) pipe, and 460’ of 4-1/2” x 20’ (2-7/8 IF) pipe, double tandem gooseneck pipe trailer,

Package price:  $250,000

 

DRILTECH T25K (Ref#4902RA) Manufactured 1999, Cat deck engine, mounted on 1999 Sterling with Cat engine, 1050/350 air compressor, 6 rod carousel, jib boom, water injection, hammer oiler, 4 hydraulic leveling jacks, 300’ of 20’ x 4” drill pipe, excellent condition, ready to go  Price:  $325,000  PRICE REDUCED:  $240,000

  

DRILTECH T25KW  (Ref#1438N)  Manufactured 1998, 900/350 Sullair air compressor, Cat 3406E deck engine, Approx  6600 hours, 6 rod carousel, 15-18 rod side trough, drillers helper levers, mounted on 1998 Ford Lot TM with diesel engine (approx 30,000 miles), drill pipe, breakout tools, slips, bushings  Price:  $215,000  PRICE REDUCED:  $195,000

 

DRILTECH T25KW (Ref#13328Na) Manufactured 1998, Cat 3406 deck engine, mounted on 1997 Ford NL8000 with diesel engine, 900/350 air compressor, 30000# pullback, 20 gpm Bean water injection, hammer oiler, many rebuilds, 500’ of 4 ½” drill pipe   Price:  $235,000

 

DRILTECH D25 (Ref#9999R) Manufactured 1996, Cat 3406C deck engine, mounted on Ford L8000, 840/350 air compressor, 400’ of 4 ½” x 20’ drill pipe  Price:  $185,000

 

DRILTECH D25K  (Ref#55Na)  Manufactured 1996, 900/350 air compressor, Cat 3406E deck engine (rebuilt April 2012), mounted on 1997 Ford L8000 tandem axle truck with Cummins engine, winch, 3 leveling jacks, helper’s station, 400’ of 4-1/2” drill pipe, fully tooled  Price:  $165,000

 

DRILTECH D25K  (Ref#2257T)  Manufactured 1995, 900/350 air compressor, extended mast (with 612 Welco Beales casing hammer, 28’ stroke above the casing hammer, Cat 3406 deck engine, jib boom, no carousel, no rod box, set up for 4-1/2” x 20’ drill pipe, mounted on Ford 9000 truck with 300 hp Cat engine  Price:  $140,000

 

DRILTECH 25K  (Ref#8427R)  Manufactured 1995, 900/350 air compressor, Cat 3406 deck engine, 30,000# pullback, Bean 20 gpm water injection pump, mounted on Ford LN2000 truck with Cummins engine (rebuilt 2000 hours ago), 420’ drill pipe, 2 hammers, stabilizer  Price:  $180,000  PRICE REDUCED:  $170,000

 

DRILTECH D25K (Ref#7047R) Manufactured 1995, rebuilt Cat deck engine, rebuilt 900/350 air compressor, mounted on CCC with new Cummins engine, lazy susan, jib boom, Bean water injection, line oiler, rod box, no mud, 4 hydraulic leveling jacks, 300’ of 3 ½” reg Schramm drill pipe, ready to go, many extras  Price:  $210,000

 

DRILTECH D25K  (Ref#1354R)  Manufactured 1994, 850/350 Sullair air compressor, Cat 3406 deck engine (new Turbo installed recently), mounted on Ford L8000 truck  Price:  $135,000

 

DRILTECH 25K3W  (Ref#2169N)  Manufactured 1992, 900/350 Sullair compressor (overhauled 2 years ago), Cat 3406 (400 hp) deck engine, mounted on Ford L8000 truck, 6 cylinder Ford diesel engine in truck, 400 hours on rig since last overhaul, 120’ drill pipe, tools  Price:  $200,000

 

DRILTECH D25  (Ref#14603R)  Manufactured 1988, 850/350 GHH air compressor (4500 hours), Cat 3406B deck engine (rebuilt, 400 hours), mounted on Ford L8000 truck with 6 cylinder diesel engine, top head rebuilt, 420’ of 4-1/2” x 20’ drill pipe, 6 rod carousel, rod box, 6” hammer and bit, Bean 18 gpm water injection, hammer bit  Price$140,000  PRICE REDUCED:  $105,000

 

DRILTECH T25K2W  (Ref#3671T)  Manufactured 1987, 900/300 Elgi air compressor (2100 hours), Cat 3406B deck engine 8300 hours, mounted on Ford L8000 truck with Cummins engine, Jake brake, (2) Aardvark 916 casing hammers, 300’ drill pipe, 5” and 6” hammers, tooling.  Price:  $135,000

1977 Interantional 4300 pipe truck, 1500 gal flat tank, welder, crew truck, extra drill steel.

 

DRILTECH T25KW  (Ref#10617T)  Manufactured 1987, 825/350 air compressor (rebuilt 2015, 1050 hours since), 3406 Cat diesel engine (rebuilt 2015, 750 hours), mounted on 1987 Ford L8000 truck with diesel 8.3L engine, 11’ stabilizer, 360’ drill pipe, 8-3/4” roller bits, 6” hammer  Price:  $165,000

 

DRILTECH D25 (Ref#10961R) Manufactured 1987, new Cat 3406 deck engine, mounted on Ford tandem axle truck with diesel engine, new pins & bushings, 13 speed trans, 850/350 GHH air compressot, no mud, 18gpm water injection, Mincon hammer, 4 hydraulic leveling jacks, 340’ of 4 ½” x 20’ drill pipe, one owner rig, well maintained & ready to go   Price:  $110,000

 

DRILTECH 25 (Ref#4902RC) Manufactured 1987, Cat deck engine, mounted on 1987 Ford with Ford diesel engine, 840/300 air compressor, water injection, hammer oiler, 4 hydraulic leveling jacks, 300’ of 20’ x 4” drill pipe, excellent condition, ready to go  Price:  $265,000  PRICE REDUCED:  $160,000

 

DRILTECH D25K  (Ref#1803N)  Manufactured 1986, 900/500 Sullair air compressor (new, less than 500 hours), Cat 3406 deck engine, mounted on 1985 Ford Louisville 9000 truck with Cat 3208 Turbo charge, 9 gpm Meyers water injection, standard pullback, standard mast, 6 rod carousel, pipe loader, all new valve bodies, truck has 43,000 miles, getting ready to paint rig  Price:  $145,000

 

DRILTECH T25K2W  (Ref#10745)  Manufactured 1986, 840/350 air compressor, Cat 3406 diesel engine on deck, 5 x 6 Gardner Denver air operated mud pump, mounted on Ford L8000 with Cat 3208 (250 hp) diesel engine, hammer oiler, water injection pump, carousel, 300’ drill pipe, 8” hammer  Price:  $145,000

 

DRILTECH D25  (Ref#9570N)  Manufactured 1985, 850/350 Sullair compressor, 3406 Cat deck engine, 5 x 6 Gardner Denver mud pump, 10 gpm water injection, 30,000# pullback, mounted on 1985 International truck, 466 engine, 6 rod carousel, 20’ drill pipe Price:  $120,000  PRICE REDUCED:  $80,000

Tooling available at extra cost