CRANE BARGES FOR SALE

 

CRANES AND CRANE BARGES FOR SALE

 

250’ x 72’ x 16’ FLAT DECK CRANE BARGE (Ref#1828)

Built 1983, ABS certified, US Coast Guard Inspected / Jones Act approved, US Flag. Fitted for TEU and FEU. 2529 GRT + NRT. Manitowoc 4100 Crane. Excellent Condition. Located Caribbean. 6 month charter price: $2,800/day


220’ x 45’ x 11’ FLAT DECK BARGE (Ref#1974)

12 Compartments, 80’ spuds, Raked, 125 ton Lima, 100’ lattice boom crane, on crawler. Located East USA. Price: $325,000 for Barge and Crane package


199’ X 52’ X 15’ BARGE WITH CRANE  (Ref#1845

Built 1960, 10.5 loaded depth, 1214 GRT, 1215 NRT, 30’ x 40’ clear deck, 28 ton x 90’ boom crane, 2 spud, located Mid South USA  Price:  $1,600,000


180’ X 70’ X 10’ CRANE BARGE  (Ref#1842

4’ draft, 3500 sq ft open deck, main derrick 513 tons, jib 100 tons, 130’ boom length, 30’ jib length, 8V92 Detroit crane engines, 10’ heel pin to stern.  50 ton hydraulic crane w/100’ telescoping boom, 5 ton whip, 471 Detroit engine.  SSB and multichannel VHF.  4-point mooring system, (2) 50’ spuds, (4) 8000# anchors, (1) 40kw and (1) 30 kw generators, (2) 371 Detroit generator engines, (2) 375 cfm air compressors, 1500 gal fuel capacity, (2) 500 gal water tanks, located US  Price:  $1,375,000


SPUD BARGE WITH CRANE (Ref#1798)

175’ x 35’ x 8’5”, Raked both ends, 2 spuds – hydraulic manual operated, concrete pad on deck for purposes of tracking the Bucyrus Erie 30B lattice boom crane. Price: $300,000


SENNEBOGEN CRANE  (Ref#1479) 

Manufactured 2005, Model 870M, mounted on tandem axle double wheeled carrier, hydraulic cab riser, 15,000 hours, B23-1 boom and stick configuration, 79’ reach, new hydraulic cylinder, located New York  Price:  $350,000


INLAND CLASS BARGE WITH CRANE  (Ref#1088i) 

CRANE BARGE

Built 1980, Steel hull, Rake bow and stern, Certificate of Documentation and survey available. 250’ x 72’ x 16’, GRT 2564 Manitowoc 300ton 4100 ringer series II, 300' boom, 36' S2 ringer, 2013 survey available. Additional details available. Located Northeast: Price: $2,000,000.


CRANE BARGE  (Ref#1554b

Built 2003, Class BKI, 172.7’ x 60’ x 10’, 776 GT, 233 NT, P & H 150 ton crawler crane w/160’ boom installed, 29.5’ and 19.6’ section standby, crane radius 39’, fly jib 40’ standby.  (1) Genset 20 kVA, Anchor winching:  design and construction 15 ton mooring winches:  (1) ship set of 4 points mooring winches consist of 2.  (2) units of double drum mooring winch c/w 1 diesel hydraulic power pack and local control station, 5 anchor 4.5 ton each.  135 hp diesel engine power pack with necessary controls and accessories.  Engine model Hyundai, Mitsubishi D6BR, (1) hydraulic double pump 101 liters/min, (1) hydraulic oil tank.  Safety equipment, 10 m3 capacity fuel oil tank, 25 m3 fresh water tank on deck, 200 m3 fresh water tank below deck, sewage tank.  Office (full A/C), dining room, storage contained, accommodations for 20 persons, clinic.  Communication and navigation equipment.  Solas approved.  Located Southeast Asia.  Price:  $1,500,000


CRANE BARGE (PIPE LAYER) (Ref#1554c)  

Built 2003, Class BKI, 172.7’ x 60’ x 10’, 776 GT, 233 NT, Sumitomo 150 ton crawler crane w/160’ boom installed, 29.5’ and 19.6’ section standby, crane radius 39’, fly jib 40’ standby.  (1) Genset 20 kVA, Anchor winching:  design and construction 15 ton mooring winches:  (1) ship set of 4 points mooring winches consist of 2.  (2) units of double drum mooring winch c/w 1 diesel hydraulic power pack and local control station, 5 anchor 4.5 ton each.  135 hp diesel engine power pack with necessary controls and accessories.  Engine model Hyundai, Mitsubishi D6BR, (1) hydraulic double pump 101 liters/min, (1) hydraulic oil tank.  Safety equipment, 10 m3 capacity fuel oil tank, 25 m3 fresh water tank on deck, 200 m3 fresh water tank below deck, sewage tank.  Office (full A/C), dining room, storage contained, accommodations for 20 persons, clinic.  Communication and navigation equipment.  Solas approved.  Equipment for installation pipeline up to 24”.  Stinger 12 ML (39’), 12 sets of roller, welding station, 6 each Davit 10 ton capacity.  Located Southeast Asia.  Price:  $1,600,000


160 X 51 X 13 CRANE BARGE WITH 4500 MANITOWOC 100 TON CRANE (Ref#2878)

Built 1942 US Army. Extensively reworked. GT/NT 925. Winches 50,000# line pull. 60kw generator. 1¼” wire rope for mooring. Manitowoc 4500 built 1959, 100 ton over stem, powered by Cummins BT 600, 550 HP, 20 kw generator, boom length 127', crawler mounted. Manitowoc 4500 digging machine with factory installed 3rd drum, Independent boom hoist. New engine and hydraulics in 2014. Boom renewal of lacings, complete sandblasting and painting, rebuilt the house rollers. Money spent over the 2 year period ending 2015, $541,000. Located South Pacific, en route to US West Coast. Extensive survey, extensive drawings, and ultrasonic inspection report available.
 Additional equipment available:
    10 yard environmental material bucket
    7 yard Hawco modified heavy material bucket (26,000 lb)
    3.5 yard heavy digging bucket (small for the 4500)
    42 x 10 Payco pile leads 100 ft long
    APE D 36 -42 , Hydraulic trip (rebuilt fuel system)
    Hydraulic Spotter capable of 3 to 1 batter piles
    Various sized anchors (4 x 6 ton, 6 x 15 ton, and 1 x 8 ton)
Price: $1,550,000


155’ x 54’ x 10’ CRANE / BARGE (Ref#1979)

Steel barge. With: generator, welding machine, air compressor, sewage treatment system, office building, and equipment shed.  Manitowoc (Built 1992) 230 ton crawler, 4100W series II heavy lift crane, 200’ boom and 60’ jib.  Located Louisiana. Price: $1,275,000  PRICE REDUCED: $1,000,000


150 x 60 x 10 ABS SUPUD BARGE AND 200 TON CRAWLER MOUNTED DUTY CYCLE CRANE (Ref#2966)
A. 150’ x 60’ x 10’ spud barge: Built 2015, ABS. 30" spud wells, rake one end. 67,000 gallon potable water. Price: $1,200 day, minimum 6 month charter
B. Liebherr HS 895 HD 200 ton lattice boom hydraulic crawler crane Duty cycle machine, excellent for dredging. 900 HP Mann D2842LE diesel engine, 950 liter fuel tank.
Located New York
Charter both of these units for $75,000 per month on a 6 month charter.


150’ x 50’ x 12’ SPUD BARGE WITH 4600 VICOR 217 TON CRANE  (Ref#1527)  Barge built 1957, crane built 1971, 4600 Manitowoc 4600 Vicor with 140’ boom, 217 ton capacity, 4.5L John Deere generator 45kw, Perkins 4 cylinder generator 46 kw, 6 yard bucket, 7 yard bucket, GM 671 power unit  Price:  775,000


DREDGE/CRANE BARGE  (Ref#1088k

149’ x 45’ x 8’, 4600 Manitowoc crane with a power tagline, spud rig: 671 series GM, (3) 24” spuds with walking spud and air controls, (2) generators 671 series GM 60 kw, welding machine, air compressor, septic system, below deck storage:  cable, fresh water pump, rope, paint, parts, workbench with fuel transfer pump and generator rooms.  Internal fuel tanks (2) @ 15,000 gallons each.  Internal water tanks (2) @ 15,000 gallons each.  Internal oil storage tank 660 gallons.  Rack for piling drop hammer leads.
Living quarters:  galley and dining area, TV rooms.  Crew quarters will sleep 8 with one bathroom for crew.  Room for inspector and/or superintendent with two bunks, room for captain with one bunk ande connecting bathroom between guest room.  Total sleeping:  11, total bathrooms 2.  AC and heat, 2 fresh water pumps.  Price:  $350,000


140' x 40' FLAT DECK BARGE WITH MANITOWOC 250 TON CRANE (Ref#2859)

Manitowoc 3900, 250 ton lattice boom crawler crane. 140' x 40' flat deck barge. Good condition. Located Texas.
Price for crane only:  $220,000  Price for barge only:  $220,000
Package Price: $425,000


140' x 40' x 10' FLAT DECK BARGE W/ BUCYRUS ERIE 88B (Ref#2736b)

140' x 40' x 10'. Bucyrus Erie 88B Lattice Boom Crane (75 ton capacity) 2 drum, 2 spuds. 3 drum skagit spud winch. New steel on sides in 2012. Office, tool room, genset. (2) 10,000 gal fuel tanks. No ABS. Located California. Price: $150,000


137' x 62' x 11' CRANE BARGE (Ref#2952)

Built 1992, Mexican flag. 137' x 62' x 11'. Steel hull. GT 713, NT 352. Anchoring system: 4 anchors and 4 winches. Clamshells: (1) 10.4yd3 20 ton, (1) 10.4yd3 16 ton. Crane: Mitsubishi 12 cil S12A2-MPT (1) 850 HP, 125 ton. Generators: (2) 120 hp (62kw). Price: $950,000


130’ X 58’ X 8’ FLAT DECK SPUD CRANE BARGE  (Ref#2811

Built 1981, excellent condition, Linkbelt 150 ton crawler crane with 100’ lattice boom, crane leads, 30,000# hammer, 3 drum, equipped with 1-1/2 yard bucket, barge holds 800 ton, 75 kw generator, fuel tank, water tank, house and living quarters, located at shipyard, well maintained, located Louisiana  Price:  $650,000


120' x 40' x 8' CRANE BARGE (Ref#2800)

120' x 40' x 8' Crane Barge, Manitowoc 390 Vicon Crawler Crane, 100 ton capacity with 100' boom, 3 drum, with pile driving equipment and bucket. Located Louisiana. Price: $575,000


CRANE BARGE  (Ref#1018

American R20, 100’ x 50’ x 8’, spuds (2) 36” diameter internal wells, 129’ boom, hoist power 353 Cat plus twin disc converter, generator/swing: 333 Cat, rigging 8 part; 2 part, cable 1-3/8”, 5’ freeboard, 8,444 gal fuel capacity, 650 gal day tank, built 1958  Price:  $550,000


CRANE BARGE  (Ref#1017) 

Diesel Clyde Model 20 – 20 tons @ 65’, 100’ x 40.1’ x 9’, 2 internal spuds, 65’ boom plus 32’ gooseneck, hoist power: Cummins 855C 350 hp w/twin disc series converter, generator power: Cummins 855C 360 hp w/ (1) 50 kw 250 V D.C. (Swing); (1) 40 kw 250 V D.C (80” Magnet),  swig 60 hp 17,50 rpm, air controls, clearance A-frame to dick 40’6”, 19,956 gal fuel capacity, day tank 400 gallons, 1-1/8” holding and closing cable, 1” boom, built 1962  Price:  $350,000


INLAND SPUD BARGE WITH CLYDE CRANE ON DECK  (Ref#1088m) 

120’ x 55’ x 7’, 388 GT, built 2004
AmClyde Model CBW-8800 50 ton gantry crane, manufactured 1982, track span 30’, Cummins 855N engine for hoist and second Cummins 855N for travel.  120’ main boom, 30’ jib
Price:  $1,300,000   Charter price:  $900 per day


MANITOWOC 4600 DRAGLINE (Ref#1981)

Built 1981, Crawler mounted, 1100 hours, (2) Cummins diesel engines, New clutches, 140' Steel boom, (2) Counterweights, Rebuilt torque convertors, New generator, 8 yard bucket. Price: $1,750,000


SPUD BARGE WITH MANITOWOC 4000 CRANE  (Ref#1088n) 

Built 2003, 140’ x 48’ x 9’, ABS/A1, 435 GRT, 130 NRT, max draft 6’11” approx., light weight 289LT approx., cargo capacity at max load lie 100 LT approx., deck loading 2000 lb/sw ft approx., 4 transverse bulkhead, 2 longitudinal bulkhead, 1 compartments.  1965 Manitowoc 4000W 150 ton crawler crane, with rebuilt Cummins diesel  Price:  $1,200,000


CRANE BARGE (Ref#1702)

110’ x 30’ x 4’,  40 ton Bucyrus Erie lattice boom crane,  2 spuds.  Just put $93,000 into the bottom. Good condition.  Currently operating in New England. Price: $225,000


DECK BARGE, CRANE AND TUG (Ref#2676)


A.     96’ x 32’ x 6’ Spud Barge. Built 1999, 65’ hydraulic spuds (internal hydraulic power). 1000 Gal fuel capacity w/transfer pump, tool storage and accommodation space. Price: $165,000
B.     Link Belt LS-108B 40 ton lattice boom crane, built 1966, 3,000 hour, plumbed for pile driving. Price: $60,000


C.    1000 HP MODEL BOW Tug, Built 1999, 44’ x 15’ x 6’. Aluminum hull. Main engines: (2) Detroit diesels, 20,000# bollard pull, 6000# hydraulic knuckle boom crane. Accommodations for 2 crew. 12’ height of eye. 200 gallons heated fresh water, shower, galley, 950 fuel capacity.  Price: $220,000
Located Northeast.


CRANE DECK BARGE  (Ref#1080

90’L x 25’W x 7’D, (2) 16” spud wells, (2) 14” x 40’L spuds, two dum Detroit diesel spuds winch, 35 ton Koehring crawler crane w/Detroit 471, 80’ boom, shipyard tip, located Florida  Price:  $125,000

Additional equipment available at extra cost:  3,000# pile hammer, clam bucket, work float, 3 drum spud winch  $150,000


(2) CRANE BARGES (Ref# 908A&B) 90’ x 40 x 9’, 1969, 5’6” approx draft  full ballast, CLYDE 20DE crane, 65’ boom, 32’ jib, 12V71 Detroit Diesel, electric motor swing power, 3rd engine on dog house stbd side used for power generation for magnet, electric air compressor motor 5hp,  pneumatic operation from compressed air at 120PSI various operating pressure between 80-90 PSI, air actuated spring brakes released with locking mechanisms pneumatic lock releases in cab. Located in Maryland. Price: (1) #550,000 in good condition, (1) $350,000 needs work OFF MARKET


CRANE BARGE  (Ref#1892a) 

crane barge crane barge

Barge built 1969, 90’ x 40’ x 9’, draft 5’6”.  Crane Clyde Model 20DE boom 65’ and 32’ steel consrtruction with angular chords and lacing, can be rigged for 25 ton below jib with 5 part block, p/b Detroit 12V71 diesel engine, torque converter, swing power, power generator, AC power generator, DC swing power generator, air compressor, pneumatic controls, air brakes, 8 yd Hawco Clamshell bucket, 450 gal fuel capacity (day), 20,000 gal fuel capacity (bulk), located Southeast USA  Price:  $100,000


CRANE BARGE  (Ref#1892b) 

Barge built 1969, 90’ x 40’ x 9’, draft 5’6”.  Crane Clyde Model 20DE boom 65’ and 32’ steel consrtruction with angular chords and lacing, can be rigged for 25 ton below jib with 5 part block, p/b Detroit 12V71 diesel engine, torque converter, swing power, power generator, AC power generator, DC swing power generator, air compressor, pneumatic controls, air brakes, 8 yd Hawco Clamshell bucket, 450 gal fuel capacity (day), 20,000 gal fuel capacity (bulk), located Southeast USA  Price:  $150,000


LINKBELT CRANE BARGE (Ref#908E)

1982, 180’ x 52 x 11, 722 GT / 216 NET, welded steel constructed deck barge with (4) approx. 36” diameter spud wells, raked bow and stern, (2) skegs flat bottom, deck and straight sides, below deck barge is arranged with (4) transverse watertight bulkheads and (2) longitudinal watertight bulkheads. Linkbelt LS718, designed as 300 ton construction crane, hydraulic over mechanical, 120’ boom, tip sheaves have been swapped for clamshell/dragline use.  Located in Virginia. Price: $850,000  PRICE REDUCED:  $650,000 OFF MARKET


65’ x 30’ x 6’ CRANE SPUD BARGE (Ref#2733)

(2) Spuds 14' x 30', 10 ton hydraulic crane with 45' boom, one-piece. Boom and spuds are powered by Cummins diesel engine. Raked both ends. Good condition. Located Louisiana. Price: $130,000


SELF PROPELLED CRANE/HOLD BARGE  (Ref#975

Self-propelled crane / hold barge, Built 1909, The Netherlands, 42.04 x 6.36 mtrs, 2.14 mtrs depth, 0.88 mtrs draft (empty) 2.10 mtrs (laden), freeboard 0.04 mtrs, deadweight 277 tons, hull material steel, thickness report 2006, cargo capacity 197 m3, hold dimensions 14.08 x 4.93 x 2.83 mtrs, crane Hitachi, type KH-125 (built 1984, overhauled & installed in 2002, crane capacity max 35 tons, equipment 2x spud poles 8.5 mtrs each + 2x extension for 3.0 mtrs each hydraulic poew pack for 15 tons vibrohammer (included) driven by Ford diesel engine. Personnel basket, grabs dredge grab 2x polyp grab + spares, clamshell, propulsion single screw, main engine Scania type DS11, output 300hp at 1800 rpm, gearbox Masson type AFC reduction 4.5 : 1, bow thruster is driven by DAF type 1160 DKA 220hp, Auxilliary 1 John Deere type 3029D driving 30 kVA alternator, Auxiliary 2 Deutz type 4FL912W driving 38 kVA alternator, bow thruster De Gerlien-van Tiem 360 degrees bow thruster (new 2002) driven by DAF type DK116 220hp, tank capacities fuel oil: 3.7m3  fresh water 3.0m3, Nav./comm equipment 2x VHF, GOS echo sounder, radar (not filled yet), class Dutch shipping inspectorate ADNR certificate available, Position: the Netherlands  Price:  €460,000 (Euros)


1997 MANITOWOC 777S2 CRAWLER CRANE  (Ref#1815)  200 ton capacity, approx. 17,450 hours, 777 Liftcrane Series 2 counterweight option, Cummins MTA11 diesel engine, (3) 40’ sections, (1) 20’ section, (2) 10’ sections, single sheave block, ball, no jib, currently operating in Colorado  Price:  $500,000


2000 MANITOWOC 2250 SERIES 3 CRAWLER CRANE  (Ref#1814)  300 ton capacity, approx. 28,600 hours, self-erect, Series 3 counterweight, Maxer 2000 prep., lift lagging right drum, lift lagging left drum, 2050’ load line 1-1/8” Python, rotation resistant, 1150’ whip line, 1-1/8” Pythod, rotation resistant, detachable upper point, (2) boom rigging ladders, travel alarm, swing alarm, air conditioner, Cummins M14 diesel engine, located Texas  Price:  $950,000


1999 MANITOWOC 777 (Ref#C1): 200 ton, cummins 6CTA8.3L turbo diesel,  180’ main boom, 30’ jib, new paint. Located in Indiana. Price: $690,000.


1999 MANITOWOC 222 (Ref#C2): 100 ton, cummins 6CTA8.3L turbo diesel,  160’ main boom, 30’ jib. Located in Pennsylvania. Price: $435,000.


1998 MANITOWOC 2250 (Ref#C3): 300 ton, cummins N14 turbo diesel, 200’ main boom, 40’ jib, (2) drums, new paint, Located in Ohio. Price: $1,575,000.


2001 MANITOWOC 999 (Ref#C4):  275 ton, cummins 3176C-390 diesel, 200’ boom, 30’ jib, Located in South Carolina. Price: $1,160,000.


1975 MANITOWOC 3900W (Ref#C5):  140 ton, cummins diesel, 180’ boom, 2 drums, 30’ jib, Located in Illinois. Price: $395,000.


MANITOWOC 3900 80 TON CRAWLER CRANE  (REF#1270)

 

Manitowoc 3900 Crawler Crane

 

Built 1956, recertified, 80 ton, 120’ of #9 lattice boom, Detroit 671 diesel with twin disc torque converter, 48” tracks, AC unit mounted over cab, 25 kW Magna Plus diesel generator mounted over counter weights, 30 ton 3 part block, 3 huge lights mounted in boom, the main hoist line has powered load lowering, auxiliary line does not have power load lowering, independent swing and travel, machine manuals are available.

Located Louisiana

PRICE:  $220,000


NORTHWEST CRAWLER MOUNTED DRAGLINE (Ref#2865)

Northwest Model 41, 1 1/4 yard dragline bucket. 60' boom. Model 12 Murphy diesel. Air conditioned cab. New hoist and inhaul cable, Fairlead. Extra parts: (3) new crow feet with wedges, dump sheave, spreader bar with chains, complete. Different size wedges and pins, cable ends, other chains and pulleys. Owner retired. Located Idaho. Can be trucked. Price: $45,000         

 


LATOURNEU GANTRY CRANE  (Ref#1907

gantry crane

2 available, manufactured 1975 and 1981, Model SHU 100 and SHU 100SS5.  Load capacity 89,000 lbs., diesel engine, one has meter reading of 971 hours, needs work, located Florida  Make Offer Price Range:  $60,000 each


 

MANITOWOC 3900 CRANE  (Ref#1648

Built 1960 Price:  $65,000


MANITOWOC 4000 CRANE AND RINGER (Ref#1696)

No barge with this crane. Built 1975, Manitowoc 4000 crane, 200ton, #22 main boom 150’, 36' diameter ringer attachment, 39' mast w/ equalizer, Hydraulic jacking system with power plant, Res. and Cyl. Support pads, 50,000lb aux counterweight. Ringer was recently working and provides the complete attachment for a 4000. Also already has the #22 boom, includes (10) Manitowoc Beam and Jack supports with pads. Price of ringer: $200,000   Price of crane: $375,000


1996 MANITOWOC 888 (Ref#C6): 230 ton, cummins diesel, 200’ main boom, 30’ jib, Located in Florida. Price: $850,000.


1998 MANITOWOC 111 (Ref#C7): 80 ton, cummins 6CTA8.3L turbo diesel, 160’ main boom, 30’ jib, Located in Canada. Price: $325,000.


MANITOWOC 3900 80 TON CRAWLER CRANE  (REF#1270)

Built 1956, recertified, 80 ton, 120’ of #9 lattice boom, Detroit 671 diesel with twin disc torque converter, 48” tracks, AC unit mounted over cab, 25 kW Magna Plus diesel generator mounted over counter weights, 30 ton 3 part block, 3 huge lights mounted in boom, the main hoist line has powered load lowering, auxiliary line does not have power load lowering, independent swing and travel, machine manuals are available.

Located Louisiana

PRICE:  $220,000


100 TON GROVE GMK5100 (Ref#C8):

2004, engine: 0M502LA, drive: 10 x 8 x 10, gear box: Daimler G240 16, crane width 2.75m, MEGATRAK suspension, outrigger base: 7x8m, 75.597km mileage, 7.871 operating hours, 51m boom, 8m boom extension.  Located in Europe. Price: $585,000


95 TON GROVE GMK5095 CRANE (Ref#C9):

2008, 60m main boom, engine: DM OM 502 LA (380KW/517PS), drive: 10 x 6 x 10, gear box: Daimler-Chrysler G240-16 with EPS, crane width 2.75m, MEGATRAK hydropnematic suspension, outrigger base: 7.80m x 7.50m, 30.983km mileage, 10m swing-away fly jib. Located in Europe. Price: $780,000


1999 MANITOWOC 111 (Ref#C10):

80 ton, 160’ main boom, 40’ jib, block and ball, third drum, 13,885 machine hours, 1500 hours on re-man engine. Price: $325,000.


FLOATING REVOLVING CRANE (Ref#649

New build, 86m x 31.6m x 6.2m, lifting capacity 1200 ton, boom length 98m, hooks (2) 500 ton, (2) 230 ton, 4807 gross tonnage, 1442 net tonnage  Price:  $17,000,000


MANITOWOC 4100W CRANE BARGE  (Ref#108

200 ton block, 15 ton hook ball, 130’ of #27 boom, 4100W SIII ringer attachment, equipped with 280’ of #27 boom, 50’ of #122A jib, 275,000# of auxiliary concrete counterweights, mounted on 160’ x 40’ x 8’ deck barge, renty only until July 2010  Cost:  $75,000 per month


MANITOWOC 4000 III VICON 170 TON CRANE DECK BARGE  (Ref#453

Built 2008, 185’ x 50’ x 9.5’, 140’ boom, galley/dining room for 12 men, (2) heads, showers, sinks.  (4) 4500 lb anchors, winch: Clyde frame 7 five drum, winch engine: John Deere 6068 Tier III, torque converter: twin disk 10,000 Series hydraulic, pilot house, Wabco single lever air control, Miller XMT 350 welder, (2) Victor Journeymen burning rig, deck shop and storage: 25’ x 10’ with roll up doors and full tools, 100 kva Tier III gen set, located California   OFF MARKET


MANITOWOC 4000W  (Ref#768

Crawler, built 1976, 150 ton capacity, 150’ main boom, Cummins NT350 diesel engine  Price on Request


MANITOWOC 3950 VICON CRAWLER CRANES  (Ref#674

2 available, 1995, 150 ton crawler crane, equipped with 90’ #39 boom with open throat tip, Cummins NTA-855 engine, Vicon controls, electronic LMI, 37 kw generator, Ohio control box, AC cab, 100 ton hook/block, excellent condition  Price:  $510,000


CRANE BARGE  (Ref#792)   

36.52m overall length x 36.30m breadth x 03.20m depth, 606 gross tonnage, steel hull, Heavy lift: 35 ton @ 22.5m, 25 tons @ 29.5m, Aux. 16 ton @ 37.0m.  Anchor system: (2) 2.5 ton anchors, (5) 3.5 ton anchors, (1) 2.5 ton anchor.  Generator: Main power 1000 kva, output 220/440 volts.  Aux power: 90/80 kva, output 220 volts.  Capacities: fuel 50 ton,s potable water 20 tons, (1) aluminum tender workboat, surface welding and cutting gears, underwater welding and cutting gears, hydraulic power pack, water marker.  Accommodations: 40 berths, messroom, head with shower, fully A/C and heat, VHF, radar and GPS, located Asia  Price:  $1,650,000


PETTIBONE 60SC 30 TON ROUGH TERRAIN CRANE  (Ref#6182R) 

Manufactured 1977, 4338 hours, Cummins 555 diesel engine, new pistons, liners and bearings.  35’ – 84’ max 3-section telescopic boom, 30 ton max capacity, 4 hydraulic outriggers 18’ spread, 4 x 4  Price:  $40,000

 

 

VESSELS WANTED 

Let us know if you have any vessels, barges, dredges or related equipment for sale.

Keep us in your files for any equipment that may become available in the future.