Last Updated: 08/07/2017 4:17 PM

Spencer Harris, Continental Emsco

 

Spencer Harris 7000
Emsco  WS1, D2, P400-46

 

SPENCER HARRIS 7000  (Ref#3176N)

Unit: Spencer-Harris Model 7000 drawworks with forged steel circulating watercooled brake flanges; 32” Fawick low and 22” Fawick high drum clutch; 14” diameter x 39-1/2” long drum with Lebus groove bar 1-1/8” line; Foster Catheads: D & H 15” Triple TRS Hydromatic brake.

Derrick: 97’8” Spencer-Harris 4-1/2” T-1 Model 7000 tubular derrick: One Spencer-Harris 5-Sheave 28” diameter. Crown block grooved for 1-1/8 line; 4-sheave 160 ton Ideco shorty block and hook; derrick is APR rated for 250,000# hook load with a 2:1 safety factor in accordance with API standard 4-D Specification for Portable Masts; hydraulic equipment to raise and level rig on ramp and raise derrick.

Power: Two 3406 Caterpillar Engines, 425 HP each.

Trailer Mounted: All above mounted on a Spencer-Harris Model 7000 3-axle trailer with 75,000 lb. max. Neway axle suspension.

Rotary Substructure:One Rotary Table Sub 8’W x 25”L x 9’6” with hand rails. API rated for 250,000 lb. max. Rotary table supporting capacity, Ideco 175 Rotary table.

Pipe Rack: One Pipe Racking sub 8”W x 25’5” x 9’6”H with hand rails. API rated for

Substructure: 120,000 lb. pipe set back load. V-door with hand rails

Pump #1: Emsco DB 550,550 HP 7-1/4” x 16”

Power: D379 Caterpillar Engine, pump and engine have air controls, operated at drillers console

Pump #2: Emsco DB 550,550 HP 7-1/4” x 16”

Power: D379 Caterpillar Engine, pump and engine have air controls, operated at drillers console

Generator House: 8’W x 40’L with:

Generator #1: Cat 3406 with 260 KW Generator.

Generator #2: Cat 3406 with 260 KW Generator.

Air Comp: 20 HP electric motor with 120 CFM stand-by air cooled compressor.

Storage: Pump parts storage room with compartments.

Mud Systems: Shaker Tanks 10’W x 6’H x 55’L; One duel screen shale shaker powered by 5 HP electric motor; Two mud agitator powered by 10 HP electric motor: one 4” submergible mud gun.

De-Sander; Thompson tool 4 cone.

Suction Tank 10’W x 6’H x 42’L; Two mud Agitators powered by 10 HP electric motor. One 4” submersible mud gun, top mounted walkways safety rails.

Mud mixer; Two 5” x 6” centrifugal pump powered by 50 HP electric motors with mud hopper at ground level.

Driller House: 8’W x 40’L tool storage house with 3 pen Totco depth recorder, one Bear automatic driller.

Water Tank: 8’W x 8’H x 42’Long Skid equipped with ; One 2”x3” centrifugal water pump powered by 7 1/2 HP electric motor, one 2”x3” centrifugal water pump powered by 7.5 HP electric motor, one 300 bbl. capacity water tank; One four station 80 gallon closing unit with air pump and electric motor powered Hydraulic pump, One 200 gallon pressure supply reservoir 100 gallon fluid reservoir.

Fuel Tank/Oil: 8,000 gallons, Four compartment oil storage.

Blow-out Preventer: Shaffer 11” double hydraulic 1500 series with pipe and blind rams.  11x5 GK Hydrill.

Toolpusher Trailer: One - 32’ Travel Trailer.

Cat Walk: 36”W x 42”H x 50’L

Rig Mats: Three - 8’ x 12’ oak with pick-up- eyes; Four - 8’ x 18’ oak with pick-up-eyes.

Pipe Racks: Four-triangle pipe racks 42” x 32’ Long.

Swivel: Skytop-Brewster 6-SX, 220 Ton Capacity.

Air Hoist: Ingersol-Rand with 250’, 1/2” cable.

Wireline Machine: Shop made with approximately 9,000’, .092 wire.

Drill Pipe: 7000’ - 4”Grade “E” 14.00# range; X95 drill pipe with 4” Full Hole Bottleneck.

Drill Collars: (16) 6” OD x 2-1/4” ID x 30’L Collars, with 4-1/2” X-Hole connections.

Handling Tools: To fit above.

Price:  $1,350,000

 

SPENCER HARRIS MODEL 7000  (Ref#1590Ra)

Powered by 2 Detroit Model 60 Series 400 hp each, twin disc clutches w/two engine compound, 1/ 1/8” drilling line.

Hydraulic Brake

Spencer Harris 97’ x 250,000 # mast capacity mounted on a three axle carrier.

Spencer Harris box type substructure 12’ with a 300,000 # capacity and a 200,000 # setback capacity

Tool House on skid and all related engine and rig parts

Cantilever top drilling house on Water tank

2- Brewster 750 duplex pumps powered by Detroit 12V2000 engines,

150 ton 8 grooved traveling block

Hacker 17.5 inch rotary table

Brewster 65X Swivel & Kelly Rod

380 KW Marathon Generator w/Detroit 60 Series Power, 30 rg  Sullair compressor

11” 3000M Shaffer BOP double ram with annular

Mud System (2) 300 bbl mud tanks with 3 agitators, 4 cone de-sander,

2 cone de-silter, lighting. 400 bbl water tank with mud hopper and charge pumps and motors, complete.

Solids Control system, Brandt LM3 Shaker,

9000 gallon fuel tank with lube station

3000 feet 4.5 N135 Drill Pipe

2- Drill Pipe Baskets

10- 6 Inch Heavy Weights

10- 6 Inch Drill Collars

Price on Request

Also available: 18,625 feet of 4.5 DPX NC 46 Connection #16.60 S 135 Drill Pipe

 

 

SPENCER HARRIS 7000, 700HP, 260,000# (Ref#1587Rb)

Lee C Moore Trailer Mounted 3 Axle Trailer, w/Hydraulic Utility Winch, Folding Walkways, w/Stairs, Fuel, Air, Water & Hydraulic Tanks, Work Platform, 10.00R20 Tires

Lee C Moore heavy beam construction in carrier trailer

Lee C Moore (5) sheaves cluster crown, grooved for 1-1/8” drlg line; 96’ telescoping mast nominal capacity 260,000#

Spencer Harris Model 7000, 700 HP draw works; Single Drum

Drilling unit w1-1/8” Line, Catheads, Air Clutches, 15” Triple Auxiliary Water Brake

(2) Caterpillar 3406 Diesel Engine w/Electric Starter, Radiator, Twin Disc Torque Converter

Two engine compound

Spencer Harris Model 7000, 700 HP draw works with rotary air clutch assembly

12’H X 14’W X 35’L Box Type Substructure Rotary Beams, V Door Ramp, Stairs Safety Rails; 300,000# Rotary load, 200,000# set back capacity

Catwalk section with v-door ram

Catwalk extension section with rig floor access stair way

6’ height back on ramp

Starter section of back on ramp for carrier

Top doghouse mounted on lower parts storage house

Bottom parts storage house; mounted 20” pony support

Price: $1,600,000

 

SPENCER HARRIS 7000, 700HP, 250,000# (Ref#1587Rd)

Spencer Harris Trailer Mounted 3 Axle Trailer, w/Hydraulic Utility Winch, Folding Walkways, w/Stairs, Fuel, Air, Water & Hydraulic Tanks, Work Platform, 10.00R20 Tires

6’ back on ramps for carrier unit

Spencer Harris (5) sheaves cluster crown, grooved for 1-1/8” drlg line; 97’ telescoping mast nominal capacity 250,000#

Spencer Harris telescoping mast; hydraulically raised and cable scoped

12’H X 14’W X 35’L Box Type Substructure Rotary Beams, VDoor Ramp, Stairs Safety Rails; 300,000# Rotary load, 200,000# set back capacity

20’ x 8’ Top doghouse with access stair way, mounted on top of water tank

315 bbl water tank mounted on oil field skid

Brewster RSH 18” x 44” with split master bushing

Parkersburg 15” hydromatic brake

Mast raising cylinder

(2) Caterpillar Model 3406 diesel engines with electric starters, 350 HP ea

(2) Radiators direct fan drive to Cat 3406 diesel engines

Driller’s console air controls

Schwab’s Tinker Shop weight indicator; 360,000# maximum weight capacity for 1-1/8” drlg line with vernier weight on bit dial

Spencer Harris in line twin engine compound with torque converters; Quincy air compressor

McKissick 150 ton 4 Sheave Block, with BJ 150 Ton Unitized Hook for 1 1/8” Drill Line;

Generator house mounted on 3 runner oilfield skid, with AC plug panel

Detroit Series 60 diesel engine mounted in generator house, radiator, exhaust system, filter housings, controls, direct radiator fan drive, engine powering Marathon generator

Marathon Model 572RSL 4025 generator powered by Detroit Series 60 engine; Frame 572, 3 PH,

Sullair 1800ell air compressor mounted in generator house

Qunicy air compressor driven by electric motor

GE dry wound transformer Cat no. 9T83B3873, 480v – 208v

10,000 gallon fuel tank with oil storage tanks

Hydril GK 11” x 3,000 psi WP; Double Shaffer 11” x 3,000 psi WP, McEvoy 3,000 psi mud cross; mounted on rail support

(2) 2-1/16” x 5,000 WP gate valves

Associated tool house ground level

Ingersoll Rand air hoist, 8,000# pull capacity

40’ x 9’ x 5’ height crimp wall Suction mud tank mounted on oilfield skid c/w grating top, handrails, suction/discharge piping, access stairs, and 10” dump valves

(2) 6 x 8 x 11” centrifugal pumps powered by (2) 75 HP electric motors, Frame 365T

40’ x 9’ x 5’ height crimp wall Shaker mud tank mounted on oilfield skid c/w grating top, handrails, suction/discharge piping, access stairs, and 10” dump valves

SWACO Mongoose shale shaker;

Double Life 16 cone de-silter

(1) 6 x 8 x 11” centrifugal pumps powered by (2) 75 HP electric motors, Frame 365T

(2) Nord Gear 7-1/2 HP agitators with paddle assembly

Mixing hopper with venture tube and all associate piping

Price: $1,660,000

 

SPENCER HARRIS 7000, 700HP, 250,000# (Ref#1587Re)

97’ working height, 250,000# nominal capacity, Spencer Harris double telescoping mast (pipe construction), pipe racking board, single 4” standpipe, 150 ton BJ block/hook, 4 sheave crown cluster combo, strung on 8 lines with 1-1/8” drlg line

Single hydraulic cylinder for raising/lower mast

25’ x 8’ Top dog house mounted on water tank, with tool storage bins, end porch, access stair way

12’ Spencer Harris box substructure (H-beam design), 300,000# rotary load capacity, 200,000# setback capacity

Spencer Harris Trailer Mounted 3 Axle Trailer, w/Hydraulic Utility Winch, Folding Walkways, w/Stairs, Fuel, Air, Water & Hydraulic Tanks, Work Platform, 10.00R20 Tires, 6’ back on ramp for carrier

12’H X 14’W X 35’L Box Type Substructure Rotary Beams, V Door Ramp, Stairs Safety Rails; 300,000# Rotary load, 200,000# set back capacity

Two engine compound, powered by (2) Detroit Series 60 engines, 375 bhp rating, electric starter, c/w torque converter, radiator, exhaust system, filter housings, controls, direct radiator fan drive

Spencer Harris Model 7000 draw works (700 hp), with rotary air clutch assembly, driller’s console with controls and gauges, air controlled friction plate catheads, drlg line guide rollers

Ground level parts storage house mounted on oil field skid, water pumps from 350 bbl water tank mounted on separate skid

(2) American GA-750 duplex mud pumps, 750 hp, mounted on oilfield master skid, c/w pulsation dampener, fluid pressure gauge, safety shear pin type pop-off valve; powered by Detroit Series 2000 diesel engine, torque converter with belt drive to pump, 5 x 6 x 11” centrifugal charger pump powered by 50 hp electric motor

(2) Detroit Series 2000 engines, 910 bhp rating, air starter, c/w torque converter, radiator, exhaust system, filter housings, controls, direct radiator fan drive, actuator control

(2) 6 x 5 x 11” centrifugal pump with 50 hp electric motor for solids control equipment, Frame 361T, mounted on the tank master skid

(2) 40’ X 9’ X 8’ Ht mud tank system, 1000 bbl volume, crimp wall design, mounted on oil field skid, c/w square tube hand rails, useable rim lines, (3) 10 hp agitators, interconnecting pipes, suction/discharge plumbing, grating top, 10” dump valves, (3) 6 x 5 x 11” centrifugal pump with 50 hp electric motor for solids control equipment, Frame 361T, (10) cone desilter, (2) cone desander, SWACO Mongoose linear motion shaker

Mud mixing hopper system with 6 x 5 x 11” centrifugal pump with 50 hp electric motor for mixing mud chemicals, Frame 361T, c/w start/stop control, mounted on suction tank skid

Ground level parts storage house mounted on oil field ski

Detroit Series 60 diesel engine powering a Marathon 380kw generator, mounted in generator house, radiator, exhaust system, filter housings, controls, direct radiator fan drive

10,000 gallon diesel fuel tank transfer pump with distribution manifold, filter housing, start/stop switches

CPC 4 station, Model 4S1/60-20 accumulator, (8) bottle nitrogen back system, hi/lo bypass, regulator valves, pressure gauges, one air diaphragm pressure pump, triplex pressure pump with 20 hp electric motor skid mounted

Choke manifold with 3-1/16 x 5m gate valves, (2) manual flanged chokes, armor protected choke hose, and surge chamber, flare lines, mounted on skid

Shaffer Type A 11” x 3000 psi WP double ram preventer, flanged type, 11” x 3000 psi WP annular, mud cross with flanged side outlets

Ingersoll Rand 8000# (single line pull capacity) air hoist mounted on rig floor

Parkersburg 15” hydromatic brake

Sullivan Palatek Model 30DG air compressors powered by 30 hp electric motors, mounted in generator house

5-1/4” Hex Kelly, with square drive bushing, Brewster RSH 18” rotary table with split master bushing, air actuated Kelly Spinner

200 ton BJ Shorty block/hook combo with 200 ton swivel

V-door ramp with catwalk

Spool of 1-1/8” EIPS drilling line

Price: $2,220,000

 

SPENCER HARRIS 7000, 700HP, 300,000# (Ref#1587Rg)

97’ working height, 300,000# nominal capacity, Morse double telescoping mast (square tube construction), pipe racking board, single 4” standpipe, 150 ton BJ block/hook, 4 sheave crown cluster combo, strung on 8 lines with 1-1/8” drlg line

Double hydraulic cylinder for raising/lower mast

25’ x 8’ Top dog house mounted on water tank, with tool storage bins, end porch, access stair way

12’ Spencer Harris box substructure (H-beam design), 400,000# rotary load capacity, 200,000# setback capacity

Spencer Harris Trailer Mounted 3 Axle Trailer, w/Hydraulic Utility Winch, Folding Walkways, w/Stairs, Fuel, Air, Water & Hydraulic Tanks, Work Platform, 10.00R20 Tires, 6’ back on ramp for carrier

12’H X 14’W X 35’L Box Type Substructure Rotary Beams, V Door Ramp, Stairs Safety Rails; 400,000# Rotary load, 200,000# set back capacity

Two engine compound, powered by (2) Caterpillar 3406 engines, 350 bhp rating, electric starter, c/w torque converter, radiator, exhaust system, filter housings, controls, direct radiator fan drive

Spencer Harris Model 7000 draw works (700 hp), with rotary air clutch assembly, driller’s console with controls and gauges, air controlled friction plate catheads, drlg line guide rollers

Ground level parts storage house mounted on oil field skid

(2) F-800 triplex mud pumps, 800 hp, mounted on oilfield master skid, c/w pulsation dampener, fluid pressure gauge, safety shear pin type pop-off valve; powered by (1) Detroit Series 2000 and (1) Cat D-398 diesel engines, torque converter with belt drive to pump, 5 x 6 x 11” centrifugal charger pump powered by 50 hp electric motor

(2) Detroit Series 2000 engines, 910 bhp rating, air/electric starter, c/w torque converter, radiator, exhaust system, filter housings, controls, direct radiator fan drive, actuator control

(2) 6 x 5 x 11” centrifugal pump with 50 hp electric motor for solids control equipment, Frame 361T, mounted on the tank master skid

(2) 40’ X 9’ X 8’ Ht mud tank system, 1000 bbl volume, crimp wall design, mounted on oil field skid, c/w square tube hand rails, useable rim lines, (3) 10 hp agitators, interconnecting pipes, suction/discharge plumbing, grating top, 10” dump valves, (3) 6 x 5 x 11” centrifugal pump with 50 hp electric motor for solids control equipment, Frame 361T, (10) cone desilter, (2) cone desander, SWACO Mongoose linear motion shaker

Detroit Series 60 diesel engine powering a Marathon 380kw generator, mounted in generator house, radiator, exhaust system, filter housings, controls, direct radiator fan drive

10,000 gallon diesel fuel tank transfer pump with distribution manifold, filter housing, start/stop switches

Shaffer Type A 11” x 3000 psi WP double ram preventer, flanged type, 11” x 3000 psi WP annular, mud cross with flanged side outlets

CPC 4 station, Model 4S1/60-20 accumulator, (8) bottle nitrogen back system, hi/lo bypass, regulator valves, pressure gauges, one air diaphragm pressure pump, triplex

pressure pump with 20 hp electric motor skid mounted

Parkersburg 15” hydromatic brake

Spencer Harris twin engine compound with air compressor, mast guide wires

200 ton BJ Shorty block/hook combo with 200 ton swivel

Price: $2,400,000

 

CONTINENTAL EMSCO WS1 COMPLETE DRILL RIG  (Ref#11108R)  10,000’ depth capacity, Emsco drawworks 600 hp, catheads, RS22 Parkersburg hydromatic brake, powered by (2) 3406 Cat diesel engines, 3 speed transmission, Lee C. Moore 126’ x 265,000# mast (API Level 4), 10’ substructure (skinned), 17-1/2” rotary table, 400 barrel water tank, 4-station accumulator, (2) Shaffer ram BOP 11” x 5000#, (1) Shaffer annular BOP 11” x 5,000#, Continental Emsco D1000 duplex mud pump with 3412 Cat diesel engine, EWCO 15W600 duplex mud pump with Cat 3412 power, (2) mud tanks 750 barrel total and (2) Cummins shale shakers, 8,000’ of 4-1/2” x 30’ drill pipe X95 hard banded double white, (12) 5-7/8” – 6” drill collars (4-1/2 Xhole), catwalk, pipe basket, all necessary support equipment necessary to drill.  Has drilled 27 wells to 8,000’, 14 load rig.  Excellent rig, in good condition, complete and well put together.  Price:  $1,600,000

 

EMSCO P-400-46 DRILLING RIG  (Ref#6689R)

7000’ – Single Drum

Mast: 97’ Lee C Moore Derrick with Racking Board, Stand Pipe, Boom Pole, Cat Line, Sheave and Tong Weights, 5 Sheave crown 1 1/8 Groove Racking Board, and Derrick Stand

Drawworks: Emsco P-400-46 S/D Drawworks, 1 1/8” Groove, Air Controls, Skidded

Sub-Base: Box Type 7’H x 21’ W x 34’L Shoed with Mud Line, Stand Pipe Valve, Air Tank, V-Door, Hand Rails, 4- Steps, Engine Shed, Deadman Anchor, Mission Pump 1 ½ “ x 2” with 10 H.P. Electric Motor

1- Rotary Table, Brewster 18” Type RS with Drive Bushings

1- 40’ x 4 ½ Square Kelly

1-Mud Pump, Wago 6” x 14” with Quick Change Caps and Skidded

1-Air Compressor, Two-Stage I&R with 15 H.P. Electric Motor

1-4” x 6” Gaso Duplex Pump with Bullwheel and Skidded

1-BOP Type F-Cameron, Skidded, Powered by 4 Cycle Wakisha

1-7 ½ ‘ W x 7 ½ ‘ H x 16 ‘ L DogHouse

1-44 H x 7’W x 7’L Diesel Tank with Junk Box on 40’ Step-Deck Trailer

1-Set 4 ½ Bottle Neck Elevators

1-Set 4 ½ Drill Pipe Slips

1-Water Tank-Skidded, 202 BBL

1-Set Pony Subs- 4’4” H x 7 ½ ‘W x 40’L

1-Mud House Frame-7 ½ ‘W x 8 ‘H 40’L

PRICE:  $100,000