Last Updated: 10/24/2017 10:19 AM

 

OILFIELD COMPONENTS

 

 

BOWEN 250 TON POWER SWIVEL (Ref #10072R), Model S5 Bowen, Powered by brand new CAT C9 300 HP diesel engine. Equipped with brake and hooks, controls, hoses. Complete unit, well maintained, ready for immediate use. Shipping dimensions: length 16’, width 7’5”, height 9’1”, weight 15,000lbs. Located Texas. Price: 235,000

 

BOWEN 3.5 POWER SWIVEL (NEW, NEVER USED)  (ref#9921)  powered by C7 Cat engine, mounted on new oilfield skid, hydraulic hose reels, 120 ton hook/load capacity, 100’ 4-wire pressure hose, 100’ 2-wire return hose, remote control air powered w/100’ hydraulic and air line, Sunstrand hydraulic system, high pressure loop filter suction strainer, 10 micron return, 90 gallon hydraulic tank, 90 gallon fuel tank, 12V battery and battery box, swivel rack with hydraulic winch, elevator bail, manufactured from all new U.S. components with 1 year guarantee, Dimensions 234” long x 90” wide x 90” high – 13,500 lbs       

Price:  $162,000  (one week delivery after order)

Price mounted on 3-axle trailer trailer (similar to trailer made by National):  $172,000

 

BOWEN 2.5 POWER SWIVEL  (NEW, NEVER USED)  (Ref#9922) 

New and Unused

Mounted on skid, Cat 4.4 diesel engine, Sundstrand hydraulic system, 85 ton hook load capacity, power reels with 100’ 4-wire pressure hose, 100’ 2-wire return hose, remote control air panel w/100’ hydraulic and air line, Sunstrand hydraulic system, high pressure loop filter suction strainer, 12V battery and battery box, swivel rack with hydraulic winch, elevator bail, hydraulic winch, 90 gallon fuel tank, 50 gallon hydraulic tank, high pressure filter and return filters, new, manufactured from all new U.S. components with 1 year guarantee on package, manufacturer's guarantee on components (one month delivery after order)

Price:  $124,500

Price mounted on 3 axle gooseneck trailer:  $127,000

 

(2) BOWEN 2.5 POWER SWIVEL & (1) EVCO 2.5 POWER SWIVEL  (REF#10787R)

Bowen Power Swivel 2.5 (Ref#10787Ra)

Mfg. 2001, 85 ton hook load, transmission Gear Products, CAT 4.4 diesel engine, power reels with 4 wire pressure hose, hydraulic system, 12 volt battery starter, swivel rack with hydraulic winch, 90 gallon fuel tank, 2 axle trailer mounted.

PRICE:  $85,000

Bowen Power Swivel 2.5 (Ref#10787Rb)

Mfg. 1975, Bowen Power swivel head, 85 ton hook load, transmission Gear Products, CAT 4.4 diesel engine, power reel with 4 wire pressure hose, hydraulic system, 12 volt battery starter, swivel rod with hydraulic winch, 90 gallon fuel tank, 2 axle trailer mounted.  Good condition.

PRICE:  $85,000

Evco 2.5 Power Swivel (Ref#10787Rc)

Mfg. 2005, 85 ton, 2.5 Bowen Power head, diesel engine, power reels, hydraulic system, fuel tank & hydraulic tank, 2 axle trailer mounted.

PRICE:  $85,000

LOCATED TEXAS

 

BOWEN 2.5 POWER SWIVEL  (Ref#1205Tb) Skid mounted, with Detroit 453 engine, hours on available, good oil pressure and temperature, swivel turns well.  Hose reels, remote operations controls, fuel and hydraulic tanks.  Replaced top nut, wash pipe and packing.   Price:  $55,000

 

BOWEN S-45 POWER SWIVEL  (Ref#3276Ra)  2016, Cummins reconditioned 5.9L diesel engine, 1” high pressure pumps/control valve, lockable dual reels 5’ hoses, mounted on 2016 Imperial 7’ x 12’ trailer, 14,000# GVW, ST235 x 16” radials, 8-bolt, treadplate heavy duty fenders, LED lighting  Price:  $80,000

 

POWER SWIVEL UNIT  (Ref#14055RN)

2012 Logan 2.5 Power Swivel w/hydraulic power unit p/b 2012 Cummins Q5B4.5 diesel engine (360 hours), mounted on tandem axle gooseneck trailer  Price:  $100,000  PRICE REDUCED:  $90,000 – Or Best Offer

 

VARI-SWIVEL POWER SWIVEL  (Ref#2476N)  Manufactured by Skelly, rated 6,500’ with 3-1/2” drill pipe, peak torque is low speed range 6,000 ft/lb, 4,000 ft/lb toque in high speed, 80 – 1000 rpm variable speed, 3-1/2 API pin, 100 ton pulldown and pullback, 70 gpm hydraulic pump, powered by Ford 6 cylinder diesel engine (rebuilt), 13:1 gear ratio, 3000 psi, 100 gallon hydraulic oil tank, mounted on tandem axle trailer, located Texas  Price:  $57,500

 

BOWEN S1 POWER SWIVEL  (Ref#1597N)  Manufactured 2009, No hours, Never used, mounted on skid, 4BT Cummins diesel engine, 30 ton, 90 gallon fuel tank, 50 gallon hyd tank, high pressure filter and return filters, 2-3/8” 8 round, 2-7/8” 8 round, 100’ hose on each reel, wireless remote radio control, electric winch, 1485 ft/lbs torque @ 2000 psi, 50 rpm (8:1) ratio 30 ton, 100 rpm 24 ton, auxiliary hydraulics.  Immediately available  Price:  $75,000  OFF MARKET

 

BOWEN S2.5C POWER SWIVEL  (Ref#14560)  Manufactured 1990’s, 85 ton, Detroit diesel engine 35, 85 hp – 2800 rpm, located Europe  Price:  $85,000

 

(3) EVCO 85-TON POWER SWIVEL (Ref #5035R) Model 2.5 85 ton, powered by Cummins QSB4.5 diesel engines, mounted on 2010 tandem axle gooseneck trailer. Complete with hoses, reels, controls, gauges, ready for immediate use. Price: $72,500 each

 

EVCO S85 POWER SWIVEL  (Ref#6978Tb)  85 ton, 3054C Cat diesel engine, 4500 hours, hose reels, operator stand, fuel and hydraulic tanks, mounted on gooseneck trailer  Price:  $77,500

 

EVCO EPS45 POWER SWIVEL  (Ref#4221R)  Manufactured 2012, 30 ton hook load, Cummins 3BT diesel engine, hydraulic system, trail remounted  Price:  $45,000  PRICE REDUCED:  $37,000

 

2.5 POWER SWIVELS  (Ref#15602R)

A.  Bowen – 3 available, 85 ton hook load, power reels with 4 wire, pressure hose, 12 volt starter, fuel tank, controls, gauges

 (2) skid mounted with 2013 John Deere diesel engines

Price:  $75,000 each

 

100 TON TORQUEMASTER POWER SWIVEL  (Ref#5544Nb)  rebuilt, on skid on goose neck trailer  Price:  $90,000

 

POWER SWIVEL AND MUD PUMP ON TRUCK PACKAGES 

(Ref#8Na)  Pinion mud pump and hydraulic power swivel, mounted on Ford L9000 truck with 671 Detroit in truck, capacity 3500’, pinion mud pump 3-3/4 plunger size, produces 5 bpm (210 gpm) at 2000 psi, 20 ton King power swivel, complee with hydraulic lines and controls, good condition   Price:  $95,000

(Ref#8Nb)  20 Ton King Power Swivel and Gardner Denver FC-FXX duplex mud pump, mounted on 1990 GMC tandem axle with Volvo engine  Price:  $95,000

 

KING 60 TON POWER SWIVEL  (Ref#4701N)  6V71 Detroit  Price:  $65,000

 

6” KING REVERSE AIR SWIVEL – BRAND NEW  (Ref#9084R_swivel)  5” ID kelly, table bushings  Price:  $34,500

 

REVERSE UNIT – KING SWIVEL/GASO PUMP  (Ref#614N)  Manufactured 2007, 25 ton King power swivel with Detroit 353 for hydraulics, 30 gpm hydraulic pump, 6V71 x Gaso 1650C pump (rebuilt gear end and fluid end), 50 bbl tank,  30’ hydraulically raised mast for hoses, mounted on 2 axle trailer  Price:  $90,000  OFF MARKET

 

COMPLETE TDS-11 TOP DRIVE SYSTEM  (Ref#8812R)  Used and reconditioned, Manufactured August 2003, complete with all current safety upgrades and latest drill motor revision.  Top drive, VFD drive house (Siemens), Guide tracts, spreader beam, hang offs, tie backs, carriage etc., new service loops and cabling from VFD to TDS & VDC, incoming power cables from SCR to VFD included, new IBOP valves and saver sub, 120” elevator links  Price:  $1,250,000  PRICE REDUCED:  $1,180,000

 

TDS-10 TOP DRIVE  (Ref#12931R)  350 HP, electric, manufactured 2006, NOV reconditioned, FAT test can be done with two weeks notice, VFD drive house, guide tracts, spreader beam, hang offs, tie back, set up for mouse hole kickout  Price:  $925,000  PRICE REDUCED:  $810,000

 

LE TOURNEAU DDTD500 TOP DRIVE AND DOLLY (Ref #12919a)   New and unused Le Tourneau 500 Ton Direct Drive Top Drive.  Model Number DDTD500. AC Motor.  Drilling Speed Range: 0-240 rpm.  Drilling Torque: 47,500 ft-lbs, through 115 rpm.  Drilling HP: 1,040 continuous.  Static Lock Brake: 35,000 ft-lb.  Complete with Top Drive Dolly.

Price: $1,050,000

 

MARITIME HYDRAULIC TOP DRIVE MODEL DDM-500-DC-C-06-C-06-06-CC-500  (Ref#4373R)  Manufactured 1993, hours 18,763, DC Motor GE752RB1B High Torque – Shunt Field, includes rotating head, service loop, blower hose, (2) torque wrench, transport skid.  Inspected and stored 2009, some spare parts, located Europe  Price:  €450,000 (Euros)

 

TESCO 500 TON TOP DRIVE AND POWER UNIT  (Ref#699R)  500 ton, refurbished 2007, used for 7 months, dyno and MPI tested, (4) new hoses 2” OD x 75’ each, complete with links, rail guards, Cat 3412C diesel engine, 2100 rpm 750 hp unit in enclosed building, driller’s console, air starters, pipe handlers, top drive handling frame, connection locking clamps, 2 units available Price:  $375,000 each

 

TDS-3S TOP DRIVE  (Ref#14433T)  Price on Request

 

HYDRAULIC POWER FOR TOP DRIVE  (Ref#9205R)  new, never used, designed for 200 ton Foremost top drive, 5,000# psi, was powered by 400 hp Cummins 400NTC (not available), quad hydraulic pumps, mounted in 20’ container, no engine or top drive with unit.

Right hand side pump #1: Model A10V023DFR-31L volume 28cc, bar 280, 1800 rpm. 

Right hand side pump #2: Model AA4VG90HD0132L. 

Left hand side pump #3:  Model T6CM Denison

Left hand side pump #4:  Compound drive, twin disc direct drive, gear center model 28102AD.

Cost $250,000 to build, unit was test run 5 hours but contract was never realized. 

Price:  $70,000

 

LE TOURNEAU DDTD500 TOP DRIVE AND DOLLY (Ref #12919a)   New and unused Le Tourneau 500 Ton Direct Drive Top Drive.  Model Number DDTD500. AC Motor.  Drilling Speed Range: 0-240 rpm.  Drilling Torque: 47,500 ft-lbs, through 115 rpm.  Drilling HP: 1,040 continuous.  Static Lock Brake: 35,000 ft-lb.  Complete with Top Drive Dolly.

Price: $1,050,000

 

3 X LE TOURNEAU WH-1612 TRIPLEX MUD PUMPS (Ref #12919b)  3 x New and unused Le Tourneau WH-1612 Triplex Mud Pumps.  AC motor. Fluid Ends Rated for 1600 HP. 5-1/2" Liner, 12" Stroke, 1200 l/min @ 7500PSI, Forged and Heat Treated Alloy Steel Gear and Pinion 4.42:1 Ration.  API 6 Modified Valves and Seats. Price: $577,500 each  Package Price: $1,575,000 for all 3

 

LE TOURNEAU LDW1000K DRAWWORKS (Ref #12919c)  New and unused Le Tourneau 3000HP Drawworks.  Model LDW1000K.  Twin AC Drivers: LTI TT 1,500. 106,555lbs maximum Fast Line Load.  1.5KW Auxiliary HPU. 6.6m(l) x 3.9m(w) x 2.6(h). Weight 33.4 Te. Price: $1,260,000

 

OILWELL 3000E DRAWWORKS  (Ref#8890Tc)  2 traction motors POR

 

TULSA DRILL LINE SPOOLER AND DRILL LINE (Ref #12919d)  New and unused Tulsa Drill Line Spooler and Drill Line, model number TUAF-45-06.  Reel Diameter 96".  Reel width 62".  Arbor Hole 4", drive hole 2".  Reel weight (loaded) 22.8 Tonnes.  Reel weight (empty) 2.1 Tonnes.  Drill Line 7,500ft x 1-1/2". Price: $94,500.

 

HYDRAULIC DRILL PIPE CONVEYOR (Ref #12919e)  New and unused Aanestad Hydraulic Drill Pipe Conveyor.  Conveyor Belt width: 650mm.  Designed for Tubulars from 2-7/8 to 20" in width and from 28' to 45' long.

Maximum drill pipe weight 3500kg.  Bi-directional, multi-speed belt ranging from 0 to 0.66m/s.  (l)20730 x (w)including Feeder Table 2080 x (h)2100.  Includes Belt, Lift and Tailing Arm and Feed Table (for 5-1/2" pipe). Price: $525,000.

 

BLOHM AND VOSS PS500 HYDRAULIC OPERATED POWERSLIPS (Ref #12919f)  New and unused FSI Shakers and Lift Skid.  Driver Type: 2 x Vibratory Electric Motors. Feed Weir Height: 965mm. Assembled on a Combined Lift Skid.  Complete with Possum Belly Feed Box, Feed Line and Ventilation Hoods for each Shaker.  Price: $189,000.

 

3 X 5000 B4X-15 HIGH “G” FORCE LINEAR SHAKERS AND LIFT SKID (Ref #12919g)  New and unused FSI Shakers and Lift Skid.  Driver Type: 2 x Vibratory Electric Motors. Feed Weir Height: 965mm. Assembled on a Combined Lift Skid.  Complete with Possum Belly Feed Box, Feed Line and Ventilation Hoods for each Shaker.  Price: US$189,000.

 

 

DIRECTIONAL TOOLS, FRAC TANKS, CASING. OILFIELD TRAILERS (REF#14088)

CASING

3025’ of 7” Prime LTC 23#/foot casing PRICE: $20,000

750’ of 9 5/8” L80 47#/foot casing PRICE: $12,000

TRAILERS:

(2) 60 ton removable gooseneck heavy duty removable trailers

(1) 24” deck

(1) 20” deck

Tires 80%, trailer 90°

8’ 6” wide with 1’ fold outs

PRICE: $40,000 each

 (2) 4 axle 50 ton Step deck with rolling tail board, 3’ length

(3) Step deck trailer, heavy duty, 3 axle with rolling tailboard

(2) 38’ heavy duty float trailer with rolling tailboard

DIRECTIONAL TOOL

(13) Monel-flex 3 ½ - 3 ¼” OD x 29 – 30’

(19) Float sub 4 ¾ - 7 15/16”

(20) Crossover Sub 2 1/8 – 2 15/16”

(14) UBHO 2 ¼ - 2 15/16”

(5) Lift sub 1 ¼ - 2 15/16

Flex sub and reamer

PACKAGE: $157,650

 

GARDNER DENVER 1500-E 15,000’ DRILLING COMPONENTS REMOVED FROM OFFSHORE RIG  (Ref#M831)

(3) EMD 12-645-E1 diesel engines (1500 hp_, (1) Cat D353 diesel engine (435 hp, 1200 rpm) with GE 300kw AC generator

Lee C. Moore 142’ x 30 x 30’, 1,200,000# hook load derrick

Gardner Denver 1500E drawworks powered by (2) EMD D-79-MB 800 hp motors with 6032 electric brake

Oilwell 37-1/2” rotary with 2-speed transmission powered by EMD-79-MBG 800 hp motor

Oilwell 500 ton block with 6 x 60 sheaves grooved for 1-3/8” drill line

BJ 5500 Dynaflex hook 500 tons

Oilwell PC 500 swivel rated for 500 tons

Gardner Denver PZ10 triplex mud pump 1350 hp powered by (2) EMD D-79-MB 800 hp motors

Solids control system: (2) Derrick Floline shale shakers, (1) Derrick Floline mud cleaner, (1) Swaco GEXC degasser with 5 hp vacuum pump

  psi Quality Valve 33 choke manifold with for H2S service, 10 x 3”, 10,000 psi manual gate valves, 3 x 4” 10,000 psi gate valves, (1) Swaco hydraulic adjustable choke, (1) adjustable choke

Price:  $1,100,000

 

INVENTORY FOR 1200 HP RIG  (Ref#3180N)

20’ box on box sub, 11’ top 9’ pony

133’ Lee C. Moore derrick, Gross Nominal Capacity 620,000#

10 lines 413,000 capacity, leg spread 21’

8’ x 8’ x 40’ top doghouse

2 - 8’ x 10’ x 21' mud pits

1 – 8’ x 10’ x 23’

4’ x 6’ shale shaker

M-55 Bethlehem drawworks with 2 engine compound

2 – 210 blb tank mounted on 36’ skid for fuel

Price:  as is, where is:  $1,500,000

 

4.5 MW POWER GENERATING SYSTEM  (Ref#8945)  (3) GM MP36A EMD Model 16-567-E4 1500kw generator sets, 4160 volts, 3 phase, 60 hz, 720 rpm, (1) Paralleling unit for the above 3 generator sets.  System was originaly designed and built for US Military use in 1966.  Completely refurbished 1991 and currently in storage.  Located Texas.    Price:  $175,000

 

 

DRILTECK D40K DERRICK  (Ref#3810R)  Price on Request

 

131’ EMSCO DERRICK / 12’ BOX ON BOX SUBSTRUCTURE (Ref#4225N)  with 6’ pony sub  Price:  $140,000 package

 

FRANKS 96’ X 150,000# TRISCOPE DERRICK  (Ref#8765TePrice:  $29,500

 

CHINESE MADE 104’ X 204,000# DERRICK (Ref#8765Tf) with base  Price:  $39,500

 

LEE C. MOORE 127’ DERRICK  (Ref#8890Te)  triple leg 15’W with crown  POR

 

LEE C. MOORE 101’ DERRICK  (Ref#8890Td)  double leg 14’w with crown with 12’ sub  POR

 

LEE C MOORE DOUBLE DERRICK (Ref#10568R), 97’ x 220,000# capacity, no shoes  Price:  $20,000 PRICE REDUCED: $15,000

 

SPEEDSTAR SS-22 DERRICK  (Ref#14068R)  50’ length  Price:  $15,000

 

SPEEDSTAR 30K DERRICK  (Ref#8054Rb)  POR

 

WILSON SUPER DRAWWORKS  (Ref#11896Rc)  single drum drawworks, diesel engine, with rotary table on trailer  Price:  $45,000

 

LE TOURNEAU LDW1000K DRAWWORKS (Ref #12919c)  New and unused Le Tourneau 3000HP Drawworks.  Model LDW1000K.  Twin AC Drivers: LTI TT 1,500. 106,555lbs maximum Fast Line Load.  1.5KW Auxiliary HPU. 6.6m(l) x 3.9m(w) x 2.6(h). Weight 33.4 Te. Price: $1,260,000

 

LANARK 2500 DOUBLE DRUM DRAWWORKS  (Ref#14059R)  removed from wrecked Lanark 2500 drill rig, couble brake bands per drum, Wichita 2 plate 14” air clutches, right angle drive  Price:  $29,500

 

NEW KINN DRAWWORKS  (Ref#524N)  similar to Kremco 4212, 600 hp, 42” x 12” main drum, 38” x 8” sandline drum, twin disk air clutches, long main shaft for secondary assist brake, never used  Price:  $180,000

 

NATIONAL 1320UE DRAWWORKS  (Ref#3181R)  with GE 752 DC motors  Price:  $560,000

 

IDECO 725 DRAWWORKS (Ref#8310N)  Compound Hydrair 725, Quincy 350 Air Compressor  PRICE $170,000

 

N45 DRAWWORKS  (Ref#7838Rc)  Price:  $65,000

 

 

YG225 250 TON HOOK/BLOCK COMBO  (Ref#7256N)   (5)  44” sheave with 1-1/8” groove, OR 1-1/4” groove (both available), 7.5” (190 mm) major hook opening, 7.1” (180 mm) spring travel distance, overall size 142” x 38” x 31” (3610 x 960 x 775 mm), 10,432 lbs (4,732 Kg), Block bearing (5) 10-7/8” OD x 8’ ID x 3-3/4”, main bearing (1) 16.5” x 11.8” x 3.74”     Price:  $61,000

 

17-1/2” OILWELL ROTARY TABLE  (Ref#4032N)  completely refurbished, not been used since, new main shaft and bearing, excellent condition  Price:  $24,500

 

17-1/2” X 44 IDECO ROTARY TABLE  (Ref#13451R)  with split square master bushing, excellent condition  Price:  $17,500

 

7.5 LW KING SWIVEL  (Ref#13626Na)  7-1/2” ID, 150 ton capacity  Price:  $20,000    

 

10” HEX KELLY  (Ref#13626Nb)  6” ID, 35-45’ long with bushing  Price:  $20,000  

 

RT375 ROTARY TABLE (NATIONAL)  (Ref#15576)  37-1/2” opening, Table axle center inner row sprocket teeth:  53-1/4”, Max. static load rating:  5850 KN, Max. working torque:  33000 KN.M (24,354 ft/lbs),Max. rotating speed:  300 rpm, Gear ratio:  3.56, Overall dimensions:  2468 x 1810 x 718 mm, Weight:  7548 kg, Master bushing (hinged pin drive type) for 37-1/2” National rotary table, Immediately available for shipment from China   Price:  $85,000 

 

9” HOWARD TURNER TABLE  (Ref#8184RfPrice:  $15,000

 

8-1/2” MAYHEW TABLE  (Ref#8184RhPrice:  $15,000

 

NEW 13-5/8” X 5000 PSI ANNULAR AND DOUBLE RAM BOP (Shaffer Type)  (Ref#13312Ra)  , Brand: Shangahi Shenkai Petroleum Equipment Co, Model FH35-35NL, 5000 psi working pressure, API 16A certification w/US made packing element

New, never used

PRICE:  $115,000  PRICE REDUCED:  $59,500

 

BOP BRESSURE CONTAINING EQUIPMENT  (Ref#11137R)

(4) BOP Single (Cameron Type U), 13-5/8” x 10,000 psi, 4-1/16” 10K flanged outlets, ring grooved inlayed Price:  $70,000 each

(8) BOP Double (Camerson Type U), 13-5/8” x 10,000 psi, 4-1/16” 10K flanged outlets, ring grooves inlayed  Price:  $85,000 each

(5) Annular (Shaffer Type) 13-5/8” x 5,000 psi API 13-5/8” x 5,000 studded flange on top and 13-5/8” 10K flange at bottom, flanged outlet ring grooves inlayed  Price:  $62,500 each

For sale in USA, all equipment is new (Manufactured in 2008) with US made seals/elastomer, API 16A and DNV Certifications, operating manuals.  All parts interchangeable with Cameron

 

BOP CONTROL SYSTEM (Ref#8134Na)

 Located in USA.

4-STATION ACCUMULATOR

NEW SKID: 8’2” X 6’8” WIDE W/ LOAD HITCHES OR LIFT EYES @ EACH END

NEW TANK: 90 GALLON

WITH 2 EA. – 4” OIL CLEANOUTS; 1 EA. – 4” FLUID ADD; 4 EA. – 11-GALLON 3,000 WP X 1 ½” PORTED ADAPTERS (BLADDER TYPE) TOP LOAD BOTTLES.  TOP LOAD DESIGN PERMITS FIELD REPAIR, BOTTLES W/ BLADDERS PER API/ASME CODE.

1 EA. – 6 ½” OD ACCUMULATOR MANIFOLDS – 100% MACHINED; NO WELDS; TO ACCEPT 4 EA. – 11-GALLON ACCUMULATOR BOTTLES; TOTAL 44-GALLON ACCUMULATOR CAPACITY.  MANIFOLD RATED @ 6,000 PSI W.P.  ACCUMULATOR BOTTLES ARE NITROGEN PRECHARGED @ 1,000 PSI+/- 5%

1 EA. – ¾” FULL FLOW – MANUAL MANIFOLD REGULATOR

1 EA. – ¾” FULL FLOW – MAUAL ANNULAR REGULATOR

1 EA. – 1” FULL FLOW PNEUMATIC OPERATED BYPASS VALVE

4 EA. – ¾” FULL FLOW PNEAUMATIC OPERATED OPEN/CLOSE VALVES

3 EA. – LIQUID FILLED, PANEL MOUNT GAUGES (MANIFOLD 6,000 PSI, ACCUMULATOR 6,000 PSI & ANNULAR 3,000 PSI)

1 EA. - UNION STYLE DUPLEX CHARGE PUMP; BELT DRIVEN BY 10HP EXP. PROOF ELECTRIC MOTOR W/ DRIVE GUARD (BELT KEVLAR – GEAR DRIVE TYPE)

8 EA. – 1” SCHEDULE 160 OPEN/CLOSE LINES – DISCHARGING @ BACKSIDE OF BOTTLES

1 EA. - SPRECHER SCHUH EXPLOSION PROOF START/STOP CONTROL BOX

1 EA. – PRESSURE SWITCH HI/LO SHUT-OFF EXP. PROOF

1 EA. – 60:1 PNEUMATIC OVER HYDRAULIC FLUID PUMPS

1 EA. – PNEUMATIC MANIFOLD INLET W/ MOISTURE CONTROL SYSTEM, W/ OILER SYSTEM

1 EA. – PNEUMATIC REGULATOR

ALL PNEUMATIC 1/8” STAINLESS STEEL HIGH PRESSURE WITH STAINLESS STEEL CONNECTORS

ALL ATTACHED TO 1 EA. – ALUMINUM UMBILICAL RECEIVER PLATE

1 EA. – NEW 120 FT. UMBILICAL HOSE W/ RECEIVER PLATE AT EACH END

1 EA. – NEW 4-STATION CONTROL PANEL W/ AIR SUPPLY GAUGE, 4 EA. – PNEUMATIC/MANUAL OPEN/CLOSE VALVES, ALL W/ STAINLESS STEEL LINES & FITTINGS

NOTES:

Delivery 2-3 weeks

Price: $72,000

 

 

BOP CONTROL SYSTEM (Ref#8134Nb)

Located in USA.

6-STATION ACCUMULATOR

NEW SKID: 12’6” X 6.5’ WIDE W/ LOAD HITCHES OR LIFT EYES @ EACH END

NEW TANK: 280 GALLON

WITH 2 EA. – 4” OIL CLEANOUTS; 1 EA. – 4” FLUID ADD; 24 EA. – 11-GALLON 3,000 WP X 1 ½” PORTED ADAPTERS (BLADDER TYPE) TOP LOAD BOTTLES.  TOP LOAD DESIGN PERMITS FIELD REPAIR, BOTTLES W/ BLADDERS PER API/ASME CODE.

4 EA. – 6 ½” OD ACCUMULATOR MANIFOLDS – 100% MACHINED; NO WELDS; EACH TO ACCEPT 6 EA. – 11-GALLON ACCUMULATOR BOTTLES, EACH MANIFOLD W/ VALVES TO ISOLATE EACH MANIFOLD 25% OF TOTAL VOLUME FOR FUTURE FIELD SERVICE/REPAIR.  MANIFOLDS RATED @ 6,000 PSI W.P.  ACCUMULATOR BOTTLES ARE NITROGEN PRECHARGED @ 1,000 PSI+/- 10%

1 EA. – ¾” FULL FLOW – MANUAL MANIFOLD REGULATOR

1 EA. – ¾” FULL FLOW – MAUAL ANNULAR REGULATOR

7 EA. – ¾” FULL FLOW PNEAUMATIC OPERATED OPEN/CLOSE VALVES

3 EA. – LIQUID FILLED, PANEL MOUNT GAUGES (MANIFOLD 6,000 PSI, ACCUMULATOR 6,000 PSI & ANNULAR 3,000 PSI)

1 EA. - UNION STYLE TRIPLEX CHARGE PUMP; BELT DRIVEN BY 20/25HP EXP. PROOF ELECTRIC MOTOR W/ DRIVE GUARD (BELT KEVLAR – GEAR DRIVE TYPE)

12 EA. – 1” SCHEDULE 160 OPEN/CLOSE LINES – DISCHARGING @ BACKSIDE OF BOTTLES

1 EA. - SPRECHER SCHUH EXPLOSION PROOF START/STOP CONTROL BOX

1 EA. – PRESSURE SWITCH HI/LO SHUT-OFF EXP. PROOF

2 EA. – 60:1 PNEUMATIC OVER HYDRAULIC FLUID PUMPS

1 EA. – PNEUMATIC MANIFOLD INLET W/ MOISTURE CONTROL SYSTEM W/ OILER SYSTEM

1 EA. – PNEUMATIC REGULATOR (ALL PLUMBED W/ STAINLESS STEEL SUPPLY LINES)

ALL ATTACHED TO 1 EA. – ALUMINUM UMBILICAL RECEIVER PLATE

1 EA. – NEW 120 FT. UMBILICAL HOSE W/ RECEIVER PLATE AT EACH END

1 EA. – NEW 6-STATION CONTROL PANEL W/ AIR SUPPLY GAUGE, 6 EA. – PNEUMATIC/MANUAL OPEN/CLOSE VALVES, ALL W/ STAINLESS STEEL LINES & FITTINGS

NOTES:

Delivery 4-5 weeks

Price: $112,000

 

 

 

 

 

NEW CHINESE BOP - meets API requirement, located USA (Ref#7556N)

 

Item

Description and Specs

Price

1

9"-3k Shaffer Type annualr

$49,500.00

2

11"-3k Shaffer Type annualr

$72,380.00

3

11"-3k Shaffer Type single

$52,800.00

4

11"-3k Shaffer Type double

$87,780.00

5

11"-5k Shaffer Type annular

$74,580.00

6

11"-5k Shaffer Type single

$52,800.00

7

11"-5k Shaffer Type double

$96,580.00

8

11"-5k/10k Shaffer Type annular

$75,900.00

9

11"-10k Shaffer Type single

$118,800.00

10

11"-10k Shaffer Type double

$184,800.00

11

13-5/8" 5k Shaffer Type annular

$108,900.00

12

13-5/8" 5k Shaffer Type single

$75,900.00

13

13-5/8" 5k Shaffer Type double

$129,800.00

14

13-5/8" 5k/10k Shaffer Type annular

$108,900.00

15

13-5/8" 10k Shaffer Type single

$119,900.00

16

13-5/8" 10k Shaffer Type double

$195,800.00

17

13-5/8" Shaffer Type Drilling spool

$13,860.00

18

7"-3k   Annualr

$40,480.00

19

7"-3k   Single-SF (Cameron U)

$50,380.00

20

7"-3k   Double- SF (Cameron U)

$83,380.00

21

7"-5k   Annualr

$42,900.00

22

7"-5k Shaffer Type Annular

$43,780.00

23

7"-5k   Single-SF (Cameron U)

$43,780.00

24

7"-5k   Double- SF (Cameron U)

$83,380.00

25

7"-5k   Spool

$4,950.00

26

7"-5/10k   Annualr

$50,380.00

27

7"-10k   Single-SF (Cameron U)

$67,980.00

28

7"-10k   Double-SF (Cameron U)

$107,800.00

29

11"-5k   single  (Cameron U)

$72,380.00

30

11"-5k   double (Cameron U)

$107,800.00

31

11"-5k Spool

$7,128.00

32

11"-10k   single (Cameron U)

$104,280.00

33

11"-10k   double (Cameron U)

$184,800.00

34

11"-10k Spool

$10,450.00

35

13-5/8"-5k   Annular

 

36

13-5/8"-5k   Single (Cameron U)

$129,800.00

37

13-5/8"-5k   Double (Cameron U)

$195,800.00

38

13-5/8"-5k   Drilling Spool

$12,980.00

39

13-5/8"-5/10k   Annular

 

40

13-5/8"-10k RS Single  (Cameron U)

$184,800.00

41

13-5/8"-10k RS Double  (Cameron U)

$294,800.00

42

13-5/8"-10k   Drilling Spool

$17,380.00

 

 

MISCELLANEOUS SUPPORT EQUIPMENT (Ref#5832T):

6200’ of 3-1/2” x 15.50# drill pipe

(20) drill collars 4” – 6-1/2”

Misc 2-3/8” DP sucker rods and casing

(3) 40’ transportation floats

(1) International 7200D winch truck

(1) 30 bbl dual axle water tanker

Paystar 5000 pole truck with haul bed and winch

40’ tri-axle gooseeck trailer

Water well unit with derrick and power

3-axle pusher tailer

Peterbilt tractor with sleeper

Swivel with kelly

Wireline unit

14 oil tanks

3 pumps jacks

Fuel tank on (blue) drop deck

Trailer mounted generator set (green)

Misc tools/pars

 

2002 TRAVCO ELECTRIC CAMP  (REF# 10024)

6 unit side by side, skidded, custom built for extreme cold climate, built for use without the need of propane, for remote locations where propane is unavailable, sleeps 27 people, all electric Garland stove and deep fryer, private washrooms, (2) 80 gallon electric hot water tanks, (2) Jacuzzi water pumps and pressure tanks, (2) new commercial freezers, camp has only been moved 5 times since new, has very low hours, currently in service, if not sold will continue to use.  Located Canada.

PRICE:  $450,000

 

CAT 398 DIESEL ENGINE WITH RADIATOR  (Ref#10453Ra)  mounted on skid with 400 kw generator  Price:  $57,500

 

(28) CAT 398 DIESEL ENGINES (Ref#10453Rb) no radiator, manufactured late 1980’s to early 1990’s  Price:  $19,500 each

 

DIEDRICH 80K SONIC HEAD  (Ref#7745R)  refurbished with upgrades  Price:  $55,000

 

USED CP CAROUSEL  (Ref#12615TCPrice on Request

 

INGERSOLL RAND 50KW GENERATOR  (Ref#7941T)  3 phase, single phase, 3000 hours  Price:  $7,950