Last Updated: 12/04/2024 7:11 AM
DRILL PIPE, HAMMERS, BITS, CASING HAMMERS, GROUTERS, SONIC HEAD AND ACCESSORIES
HAMMELMANN HIGH PRESSURE PUMP/PRESSSURE WASHER (Ref#3925Tb)
Manufactured 2009, self-contained with Cat diesel engine 250kw (335 hp), skid mounted, piston diameter 20mm (.78 inch), 2600 bar @ 48 l/min (27,700 psi at 12.6 gpm) or 2250 bar @ 57 l/min (32,633 psi at 15 gpm), 250 kw (335 hp), 2150 u/min (rpm) Price: $59,500
D & D 13-5/8" HYDRAULIC POWER TONGS (Ref#13312Rc) PRICE: $12,000
FOSTER TYPE RECONDITION TUBING TONGS (Ref#6193T) with new air back up tool, 2-3/8" and 2-7/8" jaw set, puts up 6000 fps of torque in low gear @ 2000 psi and 1300 fps in high gear @ 2000 psi Price: $18,500
BJ TYPE B TONGS (Ref#2181Rd) w/jaws for 5" – 6-3/4", 6-5/8 – 9", 9" – 10-3/4" POR
10-3/4” FARR CASING TONGS (Ref#902Ta) Price: $27,000
10-3/4” ECKEL CASING TONGS (Ref#902Tb) Price: $33,000
13-3/8” ECKEL CASING TONGS (Ref#902Tc) Price: $47,500
J&K PVC PIPE PERFORATOR (Ref#7467Td) with large stationary IR air compressor Price: $23,500
DOWN HOLE DRILL ACCESSORIES (Ref#11501T) – Prices on Request
EDM THUNDER 8 STD HAMMER, complete with 4-1/2" Reg thread top sub, pin up, placed in serv ice 2009, approx. 7000' or less, well oiled, very good condition with 8-3/4" bit
EDM 6" QL STYLE HAMMER, getting thin but still drilling
STABILIZER, ADAPTERS, FISHING TOOSL, SUBS
Adapter 4-1/2" OD, 2-7/8 IF box to 3-1/2 Reg gox, 32" long
Bit sub 30" long 3-1/2 x 3-1/2 Reg box to pin up
Box up reverse overshot for 4-1/2" drill pipe, 2-7/8 IF box up
Pin up forward overshot for 4-1/2" drill pipe, 3-1/2 Reg pin up
BITS, HOLE OPENER, ETC
Kennametal Kensclaw (Mills Machine Co) 8 cutter 8-3/4 OD, 4-1/2 Reg pin up claw bit, very good, all cutters good and rotating pilot very good condition
Bit sub 4-1/2 OD, 3-1/2 Reg pin up with 5-1/4 carbide insert roller bit for going inside 5-9/16 liner, good condition
Rock Hog 12" OD 6315 Mission shank bit
Rock Hog 10" OD 6315 Mission shank bit
Rock Hog 8 x 10" hole opener 6315 Mission shank bit
Carbide chisel tooth spread 11" soft formation roller, mtd to 6-5/8" box 4-1/2" pin up adapter mtd to 4-1/2" box to 3-1/2" reg pin up adapter, and 1' long stabilizer
WILDEN M8 AIR DIAPHRAGM PUMP extra set diaphragms
AERMOTOR 66A80 10 HP 6" SUB PUMP Franklin Motor 230 Vac single ph with control box, mfg 1992, used rfor (1) 48 hr pump test
BRAND NEW IN BOX AERMOTOR A+35 SS-500 4" SUB PUMP, complete with Franklin 3 phase 230 VAC motor date code 6, no control box
BRAND NEW REED MODEL R235 48" CHAIN TONG WRENCH 1-1/2" to 8" capacity (used 1 time)
LIKE NEW RIDGID 36" PIPE WRENCH
REMINGTON MODEL 476 POWDER ACTUATED HAND HELD NAIL GUN 22 cal w/extras
RIDGID 60" (broke)
RIDGID 48" COMPLETE PIPE WRENCH, 2 available, good condition (slight bow in handle of one),
RIDGID 36" PIPE WRENCH, older, good condition
SHOP BUILT GEO-THERMAL PURGE PUMP, on cart with Aermotor 1 hp 115 VAC centrifugal high capacity pump, valved for forward/reverse/discharge
RIDGID PIPE THREADERS 12R head with handle and 1, 1-1/4, 1-1/2 and 2" NPT dies, like new and 00-R head with handle and 1/4" die like new.
CME DIAMOND BIT GRINDER, air powered, water cooled, 10,000 rpm
RIDGID #25 VEN YOKE PIPE VISE, very good condition 1/8 to 4"
2 ROCTEST WATER LEVEL METERS 300 and 500' models
2" and 4" inside PVC pipe cutters for monitor well installations
Parts washer, Resolve Industries 30 gal new clean fluid, tub dims 33 x 21 x 8, work light, soaker hose, wet brush
Wilton Model 3575 T 7 x 12" wet metal cutting band saw
Top and bottom of 6 rod carousel (needs tube) and some parts for same
USED HAMMERS AND BITS FOR SALE (Ref#4127T)
Tricone bits: from 5-7/8" – 16" butoon bits, 6" – 12-1/4" steel tooth bits, fishing tool bit, collide bits
Subs
Hammers: 12" – 17-1/2" hammers
Hammer Bits: 13" – 17-1/2" hammer bits
(10) 6" x 20' rods
(3) 6" x 20' rods
(13) 6" x 25' rods
(6) 10" x 25' rods
Hole openers
Stabilizers: 8" – 12-1/4"
USED TRICONE BITS: (Ref#329T)
TCI (Tungston Carbide Insert)
6-1/4' $1,320
7-7/8" $1,440
8-1/2" to 8-3/4" $1,620
9-7/8" $3,600
10-5/8" $4,200
12-1/4" $4,200
17-1/2" $10,200
Tooth Bits
6-1/4' $1,200
7-7/8" $1,440
8-1/2" to 8-3/4" $1,200
9-7/8" $1,800
10-5/8" $1,800
12-1/4" $2,160
17-1/2" $5,760
UNDER REAMER AND BITS (Ref#1827T)
a) Undereamer 12" x 16" x 7' long, 3 x 4 API thread
b) 16” bit, 3’7” body, 4’8.5” total length, 4 x 5 thread
c) 18” bit, 34.5” body, 4’ total length
Price on Request
(Ref#7607TC) Cable Tools, 2 set of 3" jars, 2 stems & swabbing tools, elevators Make offer
TOOLING FOR CABLE TOOL RIG (Ref#9361T) for 16" – 18" diameter, elevators, tooling, circle jacks POR
Cables tools (Ref#8264Tc) fishing tools, jars bits, etc.
CABLE TOOLS (Ref#7360Ta)
Set of drilling jars 5-1/4", 2-1/4" 3-1/4" threads, Set of fishing jars 5-1/4", 2-1/4" 3-1/4" threads
Wrenches, Pipe cutting tools 2-1/4 x 3-1/4" threads, Drive head
Drive clamps, 5" rope socket
5" x 14' drill stem
10" button bit, 12" button bit, 6" drill bit
Prices on Request
Ref#9215T) PILECO CONTINUOUS FLIGHT AUGER
30” X 65’ w/3” API Conn, .750 wall Price: $45,000
36” X 55’ W/3” API Conn Price: $55,000
(Ref#10324T) HD large diameter auger bit, 23" diameter flights Price: $2,000
(Ref#6879Ta) 6' bell bucket Price: $3,500
(Ref#6879Tb) 24" auger bit with 2-3/4" Kelly bar Price: $2,000
(Ref#6879Tc) 7-7/8" rerun tungsten carbide tricone bit Price: $1,350
(Ref#2175T) large diameter augers, 18” up to 8’ POR
(Ref#2258TC) Bit dressing machine, used for forging cable tools Make offer
(Ref#5653Ra) 35 pcs of 10' HQ rods Price: $6,550
(Ref#5156T) 10-1/4" hollow stem auger, drilled 3 holes, 1 drive, head and bit POR
(Ref#5172T) 8-1/4" hollow stem auger, like new, 1 drive head, 1 bit POR
(Ref#4296Tb) 40' of 8-1/4" CME auger, one bit in good condition and one worn bit, one center bit and 2 drive caps POR
(Ref#5653Rb) 11 pcs of 6-5/8" hollow stem augers 4-key Price: $5,300
(Ref#5567T) 6-1/4" augers, very good condition, two keys, two bolts POR
(Ref#13485T) 100' of 4-1/4" ID hollow stem augers, 55' of 6-1/4" hollow stem augers POR
(Ref#5818Td) 80' of 4-1/4 HSA augers purchased from Geoprobe (can be used on CME), excellent condition, hardly used POR
(Ref#1487T) 70 joints of 4” continuous flight augers with 1-1/4” hex shaft, 5’ joints POR
AUGERS (Ref#9752Nc)\
MOBILE
3-1/4" augers (21)
Cutterhead
GBonnet
Double flight lead
ACKER
4-1/4" augers (13)
Cutterhead
Bonnet
CME
8-1/4" augers (3)
Cutter head
Bonnet
1-1/8" hex x 5"x5' solid flight augers, cutterhead
1-5/8" hex x 5"x5' solid flight augers, cutterhead
60’ - 2.25 (Mobil)
55’ - 2.25 (CME)
15’ - 4.25 H.D(CME)
25’ - 6.25 light(CME)
50’ - 6.25 H.D(CME)
20’ - 10.25 H.D(CME)
35’ - 12.25 H.D(CME)
Extras:
6.25 light 2 Caps 6.25 to 1-5/8” Hex Drive Cap
6.25 H.D Bullet Shoe, Auger Fork, 6.25 to 4.25 Drive Cap
10.25 H.D Bullet Shoe, 24” Extension, 10.25 to 4.25 Drive Cap
12.25 H.D Bullet Shoe, 12.25 to 4.25 Drive Cap
Shipping cost not included. Call for individual pricing
Package Price: $26,000
(Ref#9494Td) 55' of 6-1/4" Mobile lock augers POR
(Ref#11369Tb) 50’ of 6-1/4” Hollow Stem Augers, 3 cutting heads, 2 auger caps with 2” hex POR
RODS (Ref#9752Nd)
AW RODS: 2', 5' and 10'
AWJ RODS: 2', 5', and 10'
NW RODS: 5', 10', split spoon sampler 2' x 24" (new)
NQ-2 RODS: 5', 10',
NQ-2 wireline core barrel, 10' solid inner tube (new), 10' solid inner tube (used), 5' solid inner tube (used)
10' inner tube solid, 5' inner tube solid, 10' inner tube split (bits available)
NWD4, 5' with solid I.T., 5' with split I.T., 10' with solid I.T. (new), 10' head assembly and outer tube, 5' innter tube and out tube (new), bits available
(Ref#14291Tc) 1000' PQ core Rods, 1000' BQ core Rods, NX wireline core rods and barrels POR
(Ref#7973Tb) LONGYEAR PWT 10' CASING Price on Request
MISCELLANEOUS AUGER COMPONENTS, TOOLS AND BITS (Ref#9752Ne)
P.A.M. conventional core barrel with solid and split I.T. – 5' (bits available)
PVS Plastic pipe (mixed sizes), slope indicator pipe
Bean Pump 420 with 2 cylinder diesel engine
Bean Pump 420 with 2 cylinder gas engine
1 man pumps – 318
New Moyno 3L6 pump
(2) used (newly rebuilt) Moyno 3L6 pumps
Pulling plut, 4" drive casing, pipe wrenches, winches, transmission, 2-3/4 – 9-7/8 roller bits
Austinberg sampler
Continuous sampler for CME 55
Continuous sampler for CME 45C
Diamond core bits A-1 stones, some bits oversized, NQ2, Christenson D4, diamond reaming shell,
Steel water tank for pickup truck (250 gallons)
MOYNO 3L8 PUMP BRAND NEW (Ref#9895Tb) POR
DIEDRICH DRILLING TOOLS (Ref#3064Tb)
4-1/4 Hollow Stem Augers 15 @ 5', Bolts for HSA (40), 4-1/4" auger holder, 4-1/4" double adapter, 4-1/4" auger head blade bit (3), 4-1/4" auger head finger bit
6-1/4" Hollow Stem Augers 12 @ 5' and 1 @ 3', auger bolts (40), 6-1/4" hex pin box cap, 6-1/4" pilot bit, 6-1/4" auger holder (3), 6-1/4" auger blade bit
2-7/8" AW rods box pin conn 21 @ 5', 4-1/2" AW core barrel for auger, 4-1/4 AW rod bit, 2-7/8 AW rod closed pulley plate, 2-7/8 AW rod open pulley plate, 2-3/4" AW water swivel, 2-3/5 AW rod drag bit, AW pin connect swivel, 4-1/4" AW rod solid bit, 2-7/8 AW rod cap adapter
3" Shelby Tube Head, 3" Shelby Tubes (44), 3" extruder holder, 2" split spoon sampler 4 @ 2', 2" AW head for sampler, 2" threaded shoe end (2)
3-1/2" Solid Flight Auger 12 @ 5', 1-1/8" hex pin to box conn, 3-1/2" auger holder (3), 3-1/2" U pins for augers (20), 4-1/2" auger bit
(Ref#5623T) (6) 4-1/2" x 5" HAS, (1) 4-1/4" Cutter Head, 140# AWG hammer, split spoon and connections Price: $6,500
(Ref#15489R) Diedrich 6 1/4 ID hollow stem augers (95% new – ½ never used and ½ only used twice), 50’ with center plug, barely used, like new condition Price on Request
(Ref#5790R) Mobile 3-key hollow stem augers, 55' of 6 1/4" ID x 5' HSA 50%, 100' of 3 1/4" ID x 5' HSA 50%POR
ROCK AUGERS (Ref#9280Rf) Manufactured by Jeffrey Machine, 1800mm auger Price: $17,500
ROCK AUGERS (ref#9280Rg) Manufactured by Jeffrey Machine, 2200mm auger Price: $19,500
ROCK AUGERS AND BELLING AUGERS FOR SALE (Ref#1657Tb)
24” rock auger
30” rock auger
36” rock auger
14”-48” belling auger
Prices on Request
NEW RAISE BORE DI22 PIPE (Ref#14065R) High strength (AISI 4330 steel) or standard strength (AISI 4145 steel), Integral raise pipe, 10" OD x 60" S-S length with 8-1/4" DI22, connections, with QITH high impact thread protectors, Robbins, Dresser or Subterranean wrench squares 750#/340 kg weight per pipe POR
NEW DRILL PIPE MADE IN USA (Ref#14779N)
3-1/2" OD x .368W x 20' x 2-3/8 IF (3.5" OD tool joint x 1.75" ID tool joint) Ingersoll Rand TH60/T3W flats, inertia welded drill pipe
4-1/2" OD x .337w x 20' x 2-7/8 IF (4.5" OD tool joint x 2.125" ID tool joint), T3/TH60 (cyclone) flats, inertia welded drill pipe
4-1/2" OD x .337w internal upset x 30' N-80 Grade mid body x 2-7/8 IF (4.5" OD tool joint 2.125" ID tool joint), RD20 / T4 dril pipe
3-1/2" OD x .368w x IEU x 4.5 M Grade S-135 Ditch Witch/HDD 7020/8020/JT100 (4.0" OD tool joint x 1.49" ID tool joint) New HDD drill pipe
4-1/2" OD x .337 wall internal upset x 25', S-S N-80 mid body 2-7/8 IF connection 4-1/2" OD tool joint, 2-1/8" ID T-4 pipe compatible with RD20 rig
4-1/2" OD x .337W x 20', 3-1/2 Reg connection w/12.5" long flat on pin end, 2.25 long flat on box end (box frlat perpendicular to pin flat) Driltech style
3-1/2" OD x .368w x 20', 2-3/8 IF conn/ w/Driltech flat configuration (box flat perpendicular to pin flat)
Prices on Request
(Ref#3658T) Steel casing 12” up to 24” diameter POR
(Ref#14721TB) 1500' of 4 1/2" used casing Price on Request
(Ref#14721TC) 3100' of 5 1/2" used casing Price on Request
(Ref#6389Tb) 1500' of 5" Range 2 casing POR
(Ref#9830T) 7" casing (240') left hand thread, various lengths, various drive shoes available, used for environmental drilling o a Foremost drill POR
(Ref#749Re) 10-3/4" Beco drill pipe, 50 joints Price: $185,000
CASING JACKS AND TRUCK (Ref#11313T) Jacks have new seals, 75' 15,000# hydraulic hose to go from jacks to truck, spiders, pipe slips and substructure to go from ground or floor and attachment to bolt jacks to well head, truck and casing jacks all in good working condition Price: $132,000 CDN
FOREMOST TOOLING AND ACCESSORIES (Ref#14205T)
Angle package for Foremost (Ref#14205Tb) includes stand which is mounted on trailer, includes 100' sections of hydraulic hoses with bulkhead, mast is removed from rig and mounted on stand and runs side by side with rig. Allows to drill at 25 degree angle Price: $75,000
Casing Jaws (Ref#14205Tc) 20", 13", 10", 8", 7-5/8", 6" Price: $950 each
Jaws with Casing Clamp 18", 8", 7-5/8", 7", 6" Price: $950 each
7" Left Handed Casing
(23) 5' pieces – 115' total
(26) 10' pieces – 260' total
(45) 20' pieces – 900' total
(51) 8" x 10' pieces – 510' total
8" Drill Pipe
(4) 5" pieces
(28) 15' pieces
(2) 10' pieces
Also available: Discharge head casing adapters (20 different sizes), casing shoes, dual rotary 8" quill, circulating heads.
(Ref#9343T) 16" diverter for Foremost-Barber rig POR
(Ref#10266Ng) Washington diverter for Driltech rig POR
(Ref#15413RA) 200 of 10" drill pipe Make offer
(Ref#13262T) 50 jts of 8" Reverse Circulation pipe, 20' lengths, Holte 6-5/8" FH thread, like new – some not used POR
(Ref#749Rd) 7" x 20' Reverse Circulation pipe, screwed ends, manufactured in 2005 and never used, includes bit sub, top drive, sub, pipe spacers and swivel, 50 joints Price: $335,000
(Ref#779Nb) Reverse drill pipe, 1800' of 6 5/8" x 20' Hacker pipe Price: $130,000
(Ref#10681Tc) 93 joints of 30' aluminum pipe
(Ref#3238T) 840’ 3-1/2” x 12’ aluminum pipe, like new condition POR
(Ref#10619Td) 1140' new aluminum 4-1/2" pipe $1,400 each rod
(Ref#10619Te) Used 4-1/2" Aluminum pipe $675 each rod
(Ref#3991Tb) 750’ 4-1/2” x 25’ aluminum drill pipe POR
(Ref#9696Tb) 1300' of 4-1/2" x 25' aluminum pipe, used on Driltech POR
(Ref#4858T) 400 jts of 4-1/2” x 20’ aluminum drill pipe POR
(Ref#14101Tb) 1000' of 4" x 20' (2-7/8 IF) aluminum flush joint drill pipe on 2 axle trailer with laydown system Price: $47,500
(Ref#13799R) 400' of 6-5/8" x 20' rods with 4-1/2" pin and box conn, (200' used, 200' almost new) POR
(Ref#9779Ta) 1890’ of 6-5/8” x 30’ FH drill pipe (biggest inner diameter for reverse air), approx. 63 jts total Price: $695 per joint
(Ref#1472RB) Used Matrix single tube 7" casing, left hand thread,20' lengths, connections on 6 5/8" OD mid body, 5 ¾" ID, 45 joints available, only used one summer on a Foremost drill, casing turns counter clockwise POR
(Ref#9157R) BRAND NEW BIG DIAMETER MATRIX REVERSE CIRCULATION PIPE PACKAGE Bought new in 2013 and never used, (20 jts) 11" OD (4" inner tube) x 20' drill pipe with steel thread protectors (total 400') POR
(Ref#2283Nf) 1400' yellow band, 5" X-hole 31', (4-1/2 IF tool joints) POR
(Ref#4678R) 15,000' of pipe – some double white band, some yellow/orange, Grade E pipe, most 16.60lb, some 20 lb available
POR
(Ref#15528T) 9,000' of 4" S135 (14#) with 4" full hole hardbanded drill pipe POR
(Ref#9744Tb) Approx 9000’ of 4” x 30’ S135 yellow band drill pipe POR
(Ref#2998T) 13,000’ of 4-1/2” 16.60# S-135 drill pipe, used, like new, R2 tool joints 6-1/4” OD x 3-1/4” ID 12”x9” lengths, hard banding, good IPC, Premium DWB DS 1 Cat 5 inspection POR
(Ref#7044T) 2226 jts of used 4-1/2" OD Range 2 drill pipe (4-1/2" XH connections), 16.60# G105
6-1/4" OD, 3" ID internal plastic cloating/hardbanded, DS1 Cat 4 inspection POR
(Ref#1889T) 8000’ of J-55 slim hole pipe 1” x 32’ Price on Request
(Ref#10681Td) 1200' of 2-7/8" x 32' pipe
(Ref#3917Tb) 9,300’ of 3-1/2” 13.30# E-75 slim hole NC 31 (2-7/8 IF) R2 DWB drill pipe Price on Request
(Ref#3917Tc) 5,900’ of 3-1/2” 13.30# X95 slim hole NC 31 (2-7/8” IF R2 DWB drill pipe Price on Request
(Ref#3917Td) 3,100’ of 3-1/2” 13.30# S-135 SlimHole NC 31 (2-7/8 IF) R2 DWB drill pipe Price on Request
(Ref#3917Te) 2,300’ of 3-1/2” 15.50# X-95 Slim Hole NC 31 (2-7/8 IF) R2 DWB drill pipe Price on Request
(Ref#5079T) (3) 8-5/8" spiral drill collars and (14) 6" slick drill collars POR
(Ref#6133Tb) (1) 12-1/4" x 10'L spiral drill collar, (1) 10-5/8" x 10L spiral drill collar POR
(Ref#9108R) 4526' of 5" x 30' bottleneck drill pipe with 4-1/2 IF POR
(Ref#5902N) used 49 joints 4-1/2" x 30' drill pipe (3-1/2 Reg thread), like new condition, not IR flats $550 each
(Ref#4974R) 1500' of 4-1/2" x 30' pipe (4-1/2" XO box and pin) POR
(Ref#5902N) used 49 joints 4-1/2" x 30' drill pipe (3-1/2 Reg thread), like new condition, not IR flats $550 each
(Ref#12628N) NEW 4-1/2" diameter x 30' length x 2-7/8 IF conn, 8.55 mm for Ingersoll Rand RD20, located Dubai Price per joint: $950
(Ref#1513R) 3500' of 4-1/2" x 30' (2-7/8 IF conn) Ingersoll Rand RD20 drill pipe, internal flush (not bottleneck), Texas POR
(Ref#4234T) 3,660' of RD20 drill pipe, 30' length, (approximately 70% life left) POR
(Ref#1495T) 80 pcs of 4-1/2” x 30’ (2-7/8 IF) POR
(Ref#9981T) Aluminum drill pipe, 4-1/2" x 30' Range 2, 2-7/8 IF, 9.33 lb per foot POR
(Ref#8334Rb) 1000' of 4" full hole x 30' drill pipe @ $500 each
(Ref#4818T) 4" x 30' UPSET BOTTLENECK PIPE approx. 4000', double white band POR
(Ref#8169R) 700 meters of 3-1/2" x 30' drill pipe
(Ref#8153Nb) 2500' of 3-1/2" x 30' drill pipe, 3-1/2 IF, white band POR
(Ref#14564Ra) 600+' of 30' joints, pin x box, good condition Make Offer
(Ref#14564Rb) Mission 6" hammer with float valve Make Offer
(Ref#6065T) 19 jts of 6-1/2" x 20' Schramm drill pipe (4-1/2 Reg box and pin) like new condition, only used one time POR
(Ref#12208Rc) 800' of 5-1/2" x 25' flush wall pipe Price on Request
(Ref#8828RC) 1000' of 4 1/2" x 25' pipe, (1) 8" IR 380 hammer, (2) 6" IR360 hammers, 2 stabilizers, etc
POR
(Ref#12208Rb) 25 jts (625') of 4-1/2" x 25' Ingersoll Rand T4 drill pipe Price: $425 per joint (must sell his Ingersoll Rand T4 rig first)
(Ref#8928R) 250' of Ingersoll Rand 4-1/2" x 25' drill pipe 2-7/8 IF conn, internal flush joint POR
(Ref#1308T) 15 joints of 4-1/2" x 25' (3-1/2 Reg API) drill pipe, like new condition POR
(Ref#7778Rg) 5 joints of 4-1/2" x 25' drill pipe (3-1/2 Reg API) POR
(Ref#9814Nb) 6 pieces of new 4-1/2" x 25' (.500" wall) aluminum drill pipe, Driltech D40K, 3-1/2 reg pin x box, manufactured by Star Iron Works Price $1,475
(Ref#4539T) 1000' of 25' drill pipe (used on CP 650), approx. 75% POR
(Ref#9814Nc) 6 pieces of new 4-1/2" x 25' (.674" wall) heavy steel, Driltech D40K, 3-1/2" reg pin x box, manufactured by Star Iron Works Price: $1,510
(Ref#12777Tc) 2000' of 4-1/2" x 25' drill pipe (IF thread flush), good condition POR
(Ref#10275RB) 30 joints of 4-1/2" x 25' drill pipe, used on a T4 POR
(Ref#869Tc) 1000' of 4-1/2" x 25' CP pipe POR
(Ref#3991Ta) 2200’ of 4-1/2” x 25’ drill pipe POR
(Ref#15363T) approx 800' of 4" x 25' drill pipe POR
(ref#12777Tb) 2700' of 3-1/2" x 25' drill pipe with IF thread flush, good condition POR
(Ref#10275RA) 9 joints of 3" x 25' drill pipe with 2 3/8" pin up & box, “like new" condition (used on a T2) POR
(Ref#1402Tb) 67 joints of 3-1/2 IF, 15.50# drill pipe POR
(Ref#2181Rb) (15) 6" x approx. 29'L drill collars, wrench flants on pin end POR
(Ref#2181Rd) BJ type B tongs w/jaws for 5" – 6-3/4", 6-5/8 – 9", 9" – 10-3/4" POR
INTERNATIONAL PIPE TRUCK WITH 1700' OF 20' DRILL PIPE (Ref#7349TA) Price: $46,500
(Ref#749Rc) Foremost drill pipe, 45 joints of 4-1/2" x 20' Price: $600 per joint
(Ref#341T) 800' 4-1/2" of 2-7/8 IF x 20' flush wall,16# per foot, manufactured by Heards Machine, vry good condition, never ran in compression POR
(Ref#14090T) 4-1/2" x 20' core pipe, 75 jts (1500') available $875 USD per joint
(Ref#1449R) 13 jts of 4-1/2" x 20' T64 pipe $250 each
(Ref#4305Nb) 400' of 4-1/2" x 20' Driltech pipe, 2-7/8" connections $350 per joint
(Ref#7844T) 30 joints of 4 1/2" x 20' flush joint drill pipe, 3 1/2" API POR
(Ref#15574N) 3000' of 4-1/2" x 20' drill pipe (2-7/8 IF)
(Ref#1980Ta) 1000’ of 4-1/2” x 20’ Cyclone style drill pipe (2-7/8 IF), Mfg by Star Iron POR
(Ref#1980Tb) 1000’ of heavy wall 4-1/2” x 20’ drill pipe (22 lb/ft) POR
(Ref#7778RD) approx. 700' of 4 1/2" x 20' flush joint drill pipe with 3 1/2 API reg pin/box Price on request
(Ref#4214Nc) 500' of 4-1/2" OD x 20' drill pipe, 2-7/8 IF threads, near new condition POR
(Ref#1251Nb) Drilltech pipe 4-1/2" x 20' (4" conn), 2500' available POR
(Ref#10266Nf) 1000' of 4-1/2" x 20' Driltech style pipe with 3-1/2 Reg connections
(Ref#1251Nc) Chicago Pneumatic drill pipe 4-1/2" x 20' (4" threads), 2000' available POR
(Ref#9273R) 1000' of 4 1/2" x 20' drill pipe, 3 1/2 API (used on CP650) POR
(Ref#8083T) 4-1/2" x 20' Schramm drill pipe (3-/2 Reg), 9 jts (8 bottleneck, 1 reg), POR
(Ref#9481T) 10 jts of 4-1/2" x 20' Schramm drill rod (3-1/2 Reg thread) POR
(Ref#1480Tc) 42 jts of Schramm 4-1/2" x 20' drill pipe (3-1/2" API) POR
(Ref#14213RB) 300' of Schramm drill pipe, 4 1/2" x 20' (3 1/2") about 50% POR
(Ref#12896RA) 200' of Schramm 4 1/2" x 20' drill pipe (50-60%) POR
(Ref#7669T) 50 jts of 4-1/2" x 20' Schramm drill pipe POR
(Ref#6192T) 500' of 4-1/2" x 20' (3-1/2 Reg API) drill pipe POR
(Ref#12012R) 16 joints of 4 1/2" x 20' drill pipe (2 7/8" IF), ran on Failing CF15 Price on request
Also available: 1 joint of 15' x 7" OD
(Ref#8644Tf) 1800’ of 4-1/2” x 20’ drill rod (used with GD 15W) Price: $60,000
(Ref#1123T) 20 joints of new CP 20' rod (3-1/2 Reg threads), never used, still banded POR
(Ref#6133Tc) 780' (39 pcs) 4" x 20' flush joint drill pipe, straight thread with 3-1/4" hole thru center, good condition POR
(Ref#7941Ta) 1300' of Chicago Pneumatic 4" x 20' drill pipe POR
(Ref#8299T) 220’ of 4” x 20’ Reichdrill pipe (2-7/8 IF) POR
(Ref#838Na) 540' of 4" x 20' drill pipe (3-1/2" conn), flush joints with breakouts Davey threads (used on Davey rig), flats on both ends, 300' like new POR
(Ref#5797RC) 600' of 4" flush joint x 20' drill pipe POR
(Ref#8334Rb) 760' of 4" full hole x 20' @ $500 each
(Ref#8334Rb) 2000' of 3-1/2" x 30' drill pipe @ $450 each
1979 FORD 8000 PIPE TRUCK (Ref#10288Ta) POR
(91 jts) of 3-1/2" x 30' bottleneck drill pipe 3-1/2" IF – aluminum (Ref#10288Tb) - POR
(10 jts) of 3-1/2" x 30' bottleneck drill pipe 3-1/2" IF – steel
(8) 5-1/2" drill collars with 3-1/2" IF, subs - (Ref#10288Tc) - POR
1986 FREIGHTLINER PIPE TRUCK (Ref#10289Tc)
2000' of 4-1/2" x 25' flush joint drill pipe (2-7/8" IF) – excellent shape (Ref#10289Td)
(1) 5-1/2" drill collars
Subs for bits and change overs
(Ref#2283Nd) 25 jts of 4-1/2" x 15' (2-7/8 thread) POR
(Ref#10183T) 4-1/2" OD x 15' drill pipe with 2-7/8 IF thread, brand new with thread protectors on both ends, 15 joints POR
(Ref#8721Nb) 4-1/2" dia x 15' with 2-7/8 IF (15) excellent condition (8) fair condition
(Ref#6355NB) 7 joints of 4 1/2" x 15' drill pipe, 2 3/8" connection POR
(Ref#7360T) 20 jts of 4" x 20' (2-7/8 Mayhew Threads) POR
(Ref#3279Ta) 2500' of 3-1/2" x 20' drill pipe, like new condition POR
(Ref#3278T) 200’ of 3-1/2” x 20’ drill pipe (used on Portadrill) POR
(Ref#5628T) approx. 450' of 3-1/2" x 20' drill pipe (3-1/2 IF), good condition and 4" drill collar, used on Failing and Midway rigs POR
(Ref#5594Tb) 3-1/2" x 20' Schramm bottleneck pipe – 18 jts POR
(Ref#1985Tb) 400-500' of 3-1/2" x 20' drill pipe POR
(Ref#3499T) 3-1/2" x 20' (2-3/8 FJ), 50%, 10' stabilizier POR
(Ref#5797RD) 1000' of 3 1/2" flush joint x 20' drill pipe (not for sale at this time)
(Ref#11648R) 500' of 3-1/2" x 20' drill pipe (2-3/8 IF) flush joint, used on Schramm T450WS POR
(Ref#10266Ne) 1000' of 3-1/2" x 20' Driltech style pipe with IF connections
(Ref#964T) 26 jts of 3-1/2” x 20’ drill rods, 2-3/8” thread, 50-60% good Price on Request
(Ref#10948R) 70 jts of 3-1/2" x 20' (2-3/8 IF), 60%, flats on box end Price: $275 per joint
(Ref#4815N) 2000' of 3-1/2" x 20' with 3-1/2 IF conn, 4-3/4" tool joints, square shoulder, slots box end, rated at 80% POR
(Ref#6502Rc) 2,100' of 3-1/2" x 20' white band inertia welded IF bottleneck pipe POR
(Ref#8683Tb) 143 jts of 3-1/2" S-135 drill pipe, 13.30#, bottleneck POR
(Ref#7360Tb) 10 jts 3-1/2" x 15' (2-2/8 IF threads) POR
(Ref#1427Tc) 800' of 3" x 20' bottleneck drill pipe (2-3/8 IF) POR
(Ref#2780Ta) 3000' of 3" x 10' drill pipe, excellent condition (some are new) POR
(Ref#3279Tb) 2000' of 2-7/8" x 20' drill pipe POR
(Ref#671Nb) 70 joints (1,400') of 2-7/8" x 20' bottleneck drill pipe Price: $300 per joint
(Ref#12777Td) 2000' of 2-7/8" “new" bottleneck drill pipe POR
(Ref#1338Tc) 800' of 2-7/8" x 20' pipe, flatbed pipe truck
(Ref#4447T) 100' of 2-7/8" x 20' Mayhew regular drill pipe, breakout lugs, good condition POR
(Ref#5493Tb) 500' of 20' (2-7/8" IF) drill pipe used on Mayhew and Midway rigs POR
(Ref#5493ta) 400' of 15' (2-3/8" IF) drill pipe used on Mayhew and Midway rigs POR
(Ref#2302T) 2-7/8” x 15’ Drill pipe with 2-3/8 IF, 3” too joints, approx. 300’ (100’ brand new,200’ average condition) POR
(Ref#8672Tc) 2-7/8" x 15' pipe POR
(Ref#11476T) 200' of 2-7/8" x 15' IF , 2 drill collar POR
(Ref#3812Rd) 800' of 2-3/8" x 20' pipe Price: $5,000
(Ref#8422R) 360' of 2-3/8" x 20' rod POR
(Ref#10046T) 200' of 2-3/8" x 20' pipe
(Ref#9199T) 1000' of 2-3/8" x 20' drill pipe, good condtion POR
(Ref#5175Tb) 500' of 2-3/8" x 20' FEDB pipe (brand new) POR
(Ref#3659Tb) 1100' of 2-7/8" x 30' flush joint drill pipe with breakout flates POR
(Ref#6971Te) 200’ of 2-7/8” x 10’ drill rods with 2-7/8 Mayhew Full hole joints, in rod box Price: $4,350
(Ref#5218T) 20 jts of 2-3/8” x 10’ Mayhew Jr drill pipe (near new) POR
(Ref#5179T) 200' of 3-1/2" x 5' flush joint drill pipe (2-3/8 IF thread) POR
(Ref#2181Rb) (15) 6" x approx. 29'L drill collars, wrench flants on pin end POR
(Ref#2191Rc) (3) 8" x approx. 15' L drill collars POR
Ref#2181Rd) BJ type B tongs w/jaws for 5" – 6-3/4", 6-5/8 – 9", 9" – 10-3/4" POR
(Ref#7363NB) (4 available) 15' drill collars POR
(Ref#1475NH) 7 available, 4 1/2 Drill collars POR
(Ref#10681Te) (6) 6-1/4" drill collars, (1) 12" drill collar
7 ROD CAROUSEL FOR INGERSOLL RAND TH60 (Ref#10859Rb) For 4.5" x 20' rod Price: $6,000 USD
7 ROD CAROUSEL FOR VERSADRILL (Ref#5594Tc) POR
HAMMERS/TOOLING (Ref#10275Rc)
IR QL50 with bit, Numa 6", adapters, IR QL4 hammer, IR 16 hammer, IR WL50 hammer, QL60 bits, IR 360, WL50, T4 rig parts, lifting plugs, IR 380, IR 360, Wildem M15 mud pump, and more (see file)
(Ref#5384RB)
10" Symmetrix W system, brand new, never used
8" Symmetrix W system, brand new, never used
Ingersoll Rand 6" QL60 hammer, low hours
Ingersoll Rand 8" QL80 hammer, with 10" Holte Mfg URG casing hammer system
POR
(Ref#6974NC) Various bits – 12 1/4", 11", 9 7/8", 6 ¾" All brand new & never used POR
(Ref#15413RB) Tools for cable tool rig – fishing tools, sockets, stems, bits, bailers, etc - Arizona
BIG DIAMETER AIR DRILLING SYSTEM (Ref#14132R)
“Like New" condition – only 100' drilled. Purchased in 2013. Includes:
18" MG180 hammer (made in USA)
30" bit – only drilled 60'
20" bit
20" OD shroud (top operate 30" bit)
20" x 10' lead ballast rod
16" x 10' rod
Total length of system is 40'
Package Price $75,000
19" DOWNHOLE HAMMER MODEL QL200 (Ref#3030Nb) with 19" & 24" bits Price: $94,500
INGERSOLL RAND 112, 12" HAMMER (Ref#4680Na)
Mission 12" hammer (Ref# 4680Nb)
(11500Rb) 12" Mission hammer, 6" Mission hammer POR
(Ref#14564Rb) Mission 6" hammer with float valve Make Offer
8" Ingersoll Rand hammer with 12' fluted stabilizer and 9-7/8" bit (Ref#302Nb) Price: $8,500
(Ref#5548N) TRW Down the Hole Hammer, brand new, never used, model SD4 POR
Also available: 2 joints of 2 3/8" pipe & 4 1/2" button bit
(Ref#12896RB) remanufactured 6 1/4" bits (1) available (not used since reman), and (1) 12" bit POR
TIGER TIERRA AARDVARK CASING HAMMERS (Ref#9044Nc) 2 available Price: $12,500 each
TIGER TIERRA 612 CASING HAMMER (Ref#1985Ta), located Canada POR
WELDCO BEALES 412V CASING HAMMER (Ref#14496Ta) POR
WELDCO BEALES 1321 (Ref#14496Tb) needs discharge head Price: $17,500
WELLEN CASING HAMMER (Ref#14496Tc) older version of the Weldco Beales 1321 Price: $10,000
WELLEN CASING HAMMER (Ref#9887T) Removed from T64, approx. 6" x 2', 2' depth Price: $5,000
AARDVARK 2221 AIR HAMMER (Ref#8540T) Price: $19,500
FOREMOST DR24 18" DISCHARGE SWIVEL (Ref#3072Ra) manufactured 2005, used very little and in top condition Price: $20,000
GEO LOOP 50-500 GROUTER (Ref#3384T) Manufactured 2023, only 20 hours, Honda engine, 2 mixing tanks, sand hopper, water tank, hose reel, mounted on dual axle trailer Price: $100,500
GEOLOOP 50-500 GROUTER (Ref#10438T) Honda gas engine Price: $23,000
GEO-LOOP 50-500 GROUTER (Ref#7816T) Manufactured 1998, Honda 25 hp gas engine, hose reel included, starts and runs Price: $19,500
GEO-LOOP 50-500 (Ref#5594Ta) Mid set hose reel Price: $18,500
GEO-LOOP 40-500 GROUT PUMP (Ref#9753R) Manufactured 2010, engine removed, Geo-Loop mid-set hose reel with swivel base, mounted on tandem axle trailer Price on Request
GEOLOOP 40-500 GROUTER (Ref#6267T) Honda 670 gas engine, dual piston, hose reel, water transfer pump Price: $27,500
GEOLOOP GROUTER (Ref#8809Lm) Manufactured 2005, 50-500 grouter, Cummins 4 cylinder engine, 4050 hours, Rice 20k lb trailer Price: $40,000
GEO-LOOP GROUTER (Ref#8794R) Manufactured 2006, mounted on 2 axle trailer, 16’ long, custom built, 60 gallon mixer, holds up to 500 gallons of water, how hours, stored in garage Price: $24,500
GEO-LOOP 20-320 GROUTER (Ref#11527T) Honda motor, water tank, toolboxes mounted on tandem trailer Price: $15,850
GEOLOOP 30-500 GROUTER (Ref#8910T) Honda 13 hp gas engine, on board transfer pump, skid mounted Price: $10,000
GEOLOOP MIGHTY GROUT MODEL 20-320 GROUTER (Ref#7501Ta) Honda engine, throttle control Price: $16,000
GEOLOOP GROUTER (Ref#2653Tb) Honda gas engine, trailer mounted Price on Request
GROUNDHOG GHG 212CE GROUT PUMP (Ref#3402T) Year 2004 (used for 2 jobs – approx. 16 hours), 11hp Honda engine, electric start, 41 gal mixing hopper, 32 gal pumping hopper, low hours POR
GROUNDHOG GROUTER (Ref#5261T) Like new, very low hours Price: $12,500 USD
GROUNDHOG GROUTER (Ref#3932T) Skid mounted, Honda gas engine, 30 gallon drum Price: $11,000
CHEMGROUT MODEL CG625 COLLOIDAL MIXER (Ref#9899R) Deutz F2L511 air cooled engine two cylinder with 12 volt electric start, centfigual slurry pump Model G1387, 2 x 3 x 12 Krough pump, grout pump Model 2J6 CDQ open throat, both pump rebuilt PRICE: $32,500
CHEMGROUT 620 17CF GROUT PLANT (Ref#5214Tb) Like new condition Price: $14,000
CHEMGROUT GROUTER (Ref#13757T) 3 available, electric motors, 460 Vac, 60HZ, 3 Phase, 480 volts, progressive cavity pump, electric over hydraulics Price: $9,500 each
CHEMGROUT GROUTER (Ref#6408T) Manufactured 2012, skid mounted, air powered (no engine, hook up to air compressor to run), mixer tank, hopper, used for one job Price: $10,000
HEAVY DUTY DECON TRAILER (Ref#5638T) with wash rack, 4000 psi pressure washer, Ghemgrout cement mixer, 100 gallon water tank Price: $26,500
CHEMGROUT MIXER (Ref#1736Nb) POR
1976 GMC TANDEM AXLE 2000 GALLON WATER TRUCK (Ref#9285Rb), 366 Chevy gas engine with Chemgrout 550 grouter Price: $21,500
ROSEWALL GROUT PUMP (Ref#7217Tb) Manufactured 1992, 500 gallon capacity, 9 hp Honda gas engine, mounted on tandem axle trailer Price: $13,500
ROSEWALL DOUBLE BATCH GROUTER (Ref#1844T) (2) 40 gallon tanks, 30 hp gas engine, skid mounted. 2” air pump for grouting Price: $7,500
ROSEWALL GROUTER (Ref#5864Tb) 8 hp Honda gas engine, new grout pump, frame mounted Price on Request
HYDRAULIC GROUT PUMP (Ref#4620Tb) Armstrong 5 x 6 piston pump, designed to pump 60 gpm, all hydraulic, variable speed, 95 gpm fresh water pump Price: $11,500
7-1/2 x 10 HYDRAULIC PUMP (Ref#9099) New, Never Used, 7-1/2" liner and piston, FC Standard and valve seat, Dimensions/weight: 84" long x 36" high (62" high with surge chambers) x 31" wide, Weight: 1,000 lbs., Capacity with 4" hydraulic cylinder the pump will pump 266 gpm and requires a hydraulic power pack with 65 gpm capacity. It will lift up to 28' from a tank and it will discharge material up to 5000' and greater. This pump will pump material such as: oil and sludge, water, rust and material from the tank. POR
GROUTMASTER GROUT PUMP (Ref#9044Nd) with mixing tub Price: $15,000
GROUTMASTER GROUT PUMP (Ref#10132R) 18 hp motor, ready to work POR
BOUNDRY WATER GROUT MACHINE (Ref#1510Nb) trailer mounted, 1980's, powered by twin disc Briggs and Stratton engine, all hydraulic, slide up and down
GROUTER (Ref#3120ND) Price: $9,500
GROUTER (Ref#2063Te) Two tubs, paddle mixer, 3L6 Mono, 4 cyl gas motor Price: $9,500
SCHWING CONCRETE PUMP (Ref#7902Ta) Manufactured 2007, diesel engine Price: $80,000
PUTZMEISTER BSA 1002D CONCRETE PUMP (Ref#7870Td) Manufactured 2003, no hour info but in good working condition Price: $35,000 USD
CEMENTECH IMM-60 VOLUMETRIC CEMENT TRUCK (Ref#8581T) Manufactured 2014, 10 yard, munted on 2007 Sterling truck with Mercedes engine, computerized, ticket printer, currently working Price: $162,500
JACK UP DRILLING/CORING RIG (Ref#9587) operates in 80' of water, composed of (6) 10' x 40' x 7'H FlexiFloats and (4) 10' x 20' x 7' H Flexifloats, (4) spuds, (4) 80' legs 3' dia x 40' long. Currently on the platform is a Gardner Denver mud rig used for drilling and core samples. Another type of rig such as a Mobile, Acker or CME could be placed on jack up. Currently working. Offered on rental basis: $40,000 per month. Will sell for $1,100,000
MISC DRILL EQUIPMENT (Ref#7670N)
Drawworks
Engine
Top of mast
Swivel, sheaves
Price: $27,000 for the lot - Located West Texas.
CUSTOM BUILT CRANE/HYDROFRAC UNIT (Ref#3312Nf) Mounted on 1991 International (converted school bus), 12,000# Marvin Harrington 4wd conversion DT 466 pre electronic, 4 speed Allison automatic transmission, 10,000# National crane, 30,000# Tulsa hydraulic driven (4 speed) frack unit, 6 cyl Perkins diesel, pump is 2,500 psi plunger pump (triplex), 150 gal per minute, custom built in 2005 Price: $45,000 (12' county road plow availble for additional cost.)
2003 ALLMAND MITE-ELIGHT TOWER (Ref#15419Te) 4 bulbs, 1.2L Kubota engine POR
1986 255 HP CUMMINS TEST (Ref#15419Tf) mounted on tandem axle trailer, includes drive line with guards and 1:1 gear head, and one 3:2 gear head POR
ADDCO PTS2000N SOLAR POWERED PORTABLE TRAFFIC SIGNALS (Ref#1216T)
1 set -2 trailers with (2) 3-section heads, includes fully automatic mast deployment, lifting eye for trailer placement, retractable tongue for safety and security, (2) 160w solar panels, solar tilt and rotate, (8) 6-volt 225 amp-hour deep cycle heavy duty batteries, 110 volt option, electric brakes, low power consumption LEDs, Galaxy operating system, 10 day split programming, ability to control up to 16 traffic phases., Dynamic Clearing Function, data logger and PTS2000 manual.
Microwave vehicle motion detector.
Galaxy Remote Monitoring system
Galaxy Wait Time Display system.
Price: $57,500