Last Updated: 03/07/2017 4:11 PM

TESCO, OIME, TFI, CROWN DUKE, DRACO, BW, UPETROM

Tesco

TSM 7000, 6000

OIME SL5, TBA2000, E3000, 1500

TFI 1000M

Crown/Duke  CE1000SD,  CE750SD, 600, 500

BW

Upetrom F200-2DH

LCI 2000HP SCR Rig Package

 

 

 

TESCO   No Tesco rigs available at this time

 

 

850 HP TSM 7000 MECHANICAL DRILLING RIG (Ref#8070Rg)

Rated depth 11,500’ with 4-1/2” drill pipe

31 loads (no crane required)

TSM 7000 drawworks, 380,000# max hoisting capacity with 10 lines, Eaton 324 WCBD aux brake

P/B Detroit Diesel Series 2000 (840 hp) engine

Lee C. Moore 127’ x 390,000# (with 10 lines) triple cantilever mast

Mastco one piece center load substructure, K-B ground 15’, vertical clearance for BOPs 13.4’

Oilwell 20-1/2” rotary table

Emsco LB300 swivel

Skytop Brewster 250T block/hook, BJ bails and elevator

1-1/8” drill line

(2) Oilwell 850PT triplex mud pumps, p/b Detroit Diesel Series 2000 (775hp) engines

(2) 7 compartment mud tanks 1300 bbl, with independent mud mixing systems Mission 5 x 6

(3) Radicon agitators

(2) Swaco Flo-Line Linear ALS shale shakers

Mud gas separators

Accumulator: Oilco 7 srtation / PLC controlled

Light plants, instrumentation, kelly spinner, drill pipe spinner, fuel storage water storage

Located Canada

Price:  $2,025,000

 

850 HP TSM 7000 MECHANICAL DRILLING RIG (Ref#8070Ro)

Rated depth 8,500’ using 4-1/2” drill pipe

23 loads (no crane required)

TSM 7000 drawworks, 325,000# max hoising capacity, 324 Eaton auxiliary brake

P/B Cat 3406C DITA (520 hp) engine

Butler Parks 100’ x 275,000# double cantilever mast

Command substructure, 1 piece center load, self-elevating KB-gound 17.5’, vertical clearance for BOP 12.5’

BDW 17-1/2” rotary table

Twister S150 swivel

Ideco UTB-160 block/hook, BJ bails, WTM elevator

1-1/8” drilling line

 (2) OPI 700 HDL mud pump, 8” stroke, p/b (2) Cat 3408HEUI engines @ 800 hp each

5 compartment mud tank, 620 bbl, with Mission 5 x 6 mud pump

Swaco/Linear shale shaker, Mud gas separator

Accumular:  Valvon – Control Panel 5 station / PLC controlled

Light plants, Instrumentation, Kelly Spinner, Drill pipe spinner, fuel storage, water storage

Located Canada

Price:  $650,000

 

500 HP TSM 6000A MECHANICAL DRILLING RIG (Ref#8070Rk)

Rated depth 7,800’ using 4” drill pipe

18 loads (no crane required)

TSM 6000A drawworks, Parkersburg 560mm aux brake

P/B Cat 3406 (450 hp) diesel engine

105’ x 215,000# telescopic double mast

1 piece step down center load substructure, self leveling, KB- Ground 15’, vertical clearance for BOPs 13’

BDW R-17.5 rotary table

Twister S-150 swivel

Ideco UTB-160 block/hook, BJ bails, WTM elevator

1-1/8” drilling line

Gardner Denver PZ8 mud pump, 8” stroke, p/b Cat 3412 engine

5 compartment mud tank, 620 bbl, w/independent mud mixing system Mission 5 x 6

Swaco/Linear Motiion ALS shale shakers

Mud gas separator

Accumulator: Wagner PLC Control Panel 5-station

Light plant, instrumentation, kelly spinner, drill pipe spinner, fuel storage, water storage

Located Canada

Price:  $1,350,000

 

500 HP TSM 6000 MECHANICAL DRILLING RIG (Ref#8070RL)

Rated depth 7,800’ using 4” drill pipe

18 loads (no crane required)

TSM 6000 drawworks, 188,000# max hoisting capacity, TSM 22” Hydromatic brake

P/B Cat 3406 (500 hp) diesel engine

105’ x 215,000# telescopic double mast

1 piece step down center load substructure, self leveling, KB-ground 15’, Vertical clearance for BOPS 10.9’

Intercon 17.5 rotary table

Twister 150 ton swivel, Brewster 150T block/hook, BJ bails, WTM elevator

1-1/8” drilling line

National 8-P80 triplex mud pump, 8-1/2” stroke p/b Cat 3412 (825 hp) engine

5 compartment mud tank, 620 bbl, w/independent mud mixing system Mission 5 x 6

DFTS 275 TM shale shakers

Mud gas separator

Accumulator: Wagner PLC Control Panel 5-station

Light plant, instrumentation, kelly spinner, drill pipe spinner, fuel storage, water storage

Located Canada

Price:  $1,350,000

 

500 HP TSM 6000 MECHANICAL DRILLING RIG (Ref#8070Rm)

Rated depth 7,800’ using 4” drill pipe

20 loads (no crane required)

TSM 6000 drawworks, 188,000# max hoisting capacity, Parkersburg brake

P/B Cat C15 (525 hp) diesel engine

105’ x 218,000# telescopic double mast

1 piece stop down denter load substructure, self leveling, KB-ground 15’, Vertical clearance for BOPs 10.9’

BDW 17-1/2” rotary table

Twister S150 swivel, 150T McKissick block/hook, BJ bails, WTM elevator

1-1/8” drilling line

OPI 700 HDL Triplex mud pump p/b (2) Cat 3176B engines

OPI 700 HDL Triplex mud pump p/b Cat 3408

5 compartment mud tank, 620 bbl, w/independent mud mixing system Mission 5 x 6

DFTS 275 TM shale shakers

Mud gas separator

Accumulator: Wagner PLC Control Panel 5-station

Light plant, instrumentation, kelly spinner, drill pipe spinner, fuel storage, water storage

Located Canada

Price:  $1,350,000

 

500 HP TSM 6000 MECHANICAL DRILLING RIG (Ref#8070Rp)

Rated depth 8,500’ using 4-1/2” drill pipe

21 loads (no crane required)

TSM 6000 drawworks, 350,000# max hoisting capacity, Parmac aux brake

P/B Cat 3406E (500 hp) engine

Derrick Manufacturing 105’ x 280,000# double cantilever mast

C.D.E. one piece center load substructure, KB-ground 15’, vertical clearance for BOPs 12’

Oilwell SA 17.5 rotary table

Twister S150 swivel

Ideco UTB 160 block/hook, BJ bails, WTM elevator

1-1/8” drilling line

Gardner Denver PZ8 Triplex pump, 8” stroke p/b Cat 3412 (825 hp) engine

5 compartment mud tank, 730 bbls, w/independent mud mixing system Mission 5 x 6, (2) Brook Hansen agitators

DFTS/Linear Motion shale shaker, mud gas separator

Accumulator PLC Control Panel 5-station

Light plants, instrumentation, kelly spinner, drill pipe spinner, fuel storage, water storage

Located Canada

Price:  $1,350,000

 

 

O.I.M.E. SL-5  (Ref#6946N)  750 hp SL-5 OIME drawworks, 3-engine compound powered by (3) 3408 Cat (365 hp), 131’ mast rated for 550,000 lbs., Parco fast move swing up substructure, Continental Emsco 800 hp triplex mud pumps tail driven, 1000 barrel mud tanks with mud cleaning equipment, necessary handling tools, 174 jts of 4-1/2” drill pipe, 26 drill collars, (1) 20’ container of spare parts, rig is field ready, rigged up in USA  Price:  $6,000,000

 

 

(2) OIME SL5 DRILL RIGS  (Ref#12454R)   – one stacked in Michigan, one drilling in Florida

 

(Ref#12454Ra) SEMI COMPLETE RIG IN MICHIGAN:

Drawworks

SHARED

Mast

Parco 131’  550,000# static hook load, 6 sheave crown block

Substructure

Parco 18.5’ split level, 467,000# rotary load, 357,000# simultaneous set back

Dog House

10’ by 40’ skidded with electric panel, lockers, and knowledge box
8' by 40' skidded with tool room & wire line unit

Pumps

SHARED

Mud system

2 pit (940bbl) system with two 6x8 cent. pumps with 75HP electric motors, 4 Brandt electric mixers, Smico 22 sq ft shale shaker

SHARED: 12 cone de-silter, 2 cone de-sander

Instrumentation

MD 500,000# wt. ind.– tong, torque – pump pressure gauges, satellite internet system, MDTotco EDR (electronic drilling recorder) w/rig sense package (internet access available), Wildcat automatic driller

Rotary

Twister 27 1/2"

Traveling

250 ton Block-Hook SHARED 250 ton Swivel, 5 ¼ hex kelly

Electrical

(2) 350KW generators powered by series 60 Detroit Diesel engines,
Mounted in 10’ wide by 40’ long house, with electric panel and 150KVA Transformer

BOPs

SHARED

Auxiliary
Equipment

(1) 5 ton Air Tugger

Drill String

SHARED

Location Size

350' X 350'

 

(Ref#12454Rb) COMPLETE RIG IN FLORIDA:

Drawworks

OIME SL-5  with (2) 520 HP cat 3406 Eng., WPT 3-24 water brake

Mast

Parco 131’ 550,000# static hook load, 6 sheave crown block

Substructure

Parco 18.5’ split level, 467,000# rotary load, 357,000# simultaneous set back

Dog House

10’ by 30’ skidded with electric panel, lockers, and knowledge box

Pumps

#1 Weatherford MP9 1000 HP Triplex, powered by Cat 398
#2 Weatherford MP9 1000 HP Triplex, powered by Cat 398

Mud System

2 pit (900 bbl) system with two 5 x 6 cent. Pumps with 50 HP electric Motors, 4 Brandt electric mixers, 12 cone de-silter, 2 cone de-sander, MCM 27 sq. ft. shale shaker

Instrumentation

MD 500,000# wt. ind. – tong, torque – pump pressure gauges

Rotary

Dreco 27 ½”

Traveling

250 ton Block-Hook, 250 ton Swivel, 5 ¼ hex Kelly

Electrical

(1) 300 KW generators powered by John Deere Diesel Engine, (1) Cat SR4 Generator 250 KW, 3406 engine, Mounted in 10’ wide by 40’ long house, with electric panel and 150 KVA Transformer

BOPs

13 5/8” 10,000# double SL type, 13 5/8” 5,000# Annular, Valvecon 120 Gallon, 5 station accumulator – mounted in generator house, 4” 10,000# Choke manifold, 4 ft. x 19 ft. gas separator, buster, and burner

Auxiliary
Equipment

(2) Hydraulic winch, air Kelly spinner, air pipe spinner, hydraulic power unit with 50 HP electric motor, (2) air compressors

Drill String

4 ½” 16.6# X-95 drill pipe (12,000 ft.), (16) 4 ½” 42# HW drill pipe, (15) 6 ¼” drill collars, (3) 9” drill collars

Location Size

350’ x 350’ (opt.)

PACKAGE PRICE FOR ONE COMPLETE RIG AND ONE SEMI-COMPLETE RIG:  $950,000 for everything

 

 

OIME TBA 2000 (Ref#1395N)   OIME TBA 2000 drawworks, Baylor Brake Model 6032, Compound, 4 rig engines skidded, (3) CAT D-398 drive engines, (2) Mud pump-Continental Emsco CE1000, (1) Gardner Denver PZ-9, (5) Mud tanks, Suction tank, trip tank, mixing skid, Shale shaker, mud house, (2) Desilter/Desander, (2) Generator houses with CAT 3412 generator sets, Electrical shack, (2) Diesel tank, (3) Water tank, (5) Piece rig mat, (2) Derrick section, Crown assembly, Racking boards, Lower Mast Section, (4) Pieces for substructure, Travel blocks/Skid, Rotary Table, Floor plate sections, Dog House Building, Catworks, Catwalk, Assorted plumbing and piping, Rig Suitcase, (3) Pipe racks, Camp building (Kitchen, Diner, Recreation Room, Manager and Mechanic office), Camp generator set and (2) CAT 3304 diesel engine, Drill line stand, D398 diesel engine, spool 1 ¼” drill line, Kelly in scale, Hose Basket, Tubular.  A more complete inventory will be available soon   Price: $4,000,000     Located in SE Asia.

 

O.I.M.E. (2000 HP) HELI RIG COMPONENTS  (Ref#15360b)  2 available, 1-1/4” drill line, O.I.M.E. drawworks and control system, Lee C. Moore 136’ x 670,000# mast, racking board, 27-1/2” rotary tble, Lee C. Moore sub, V Door and stairs, O.I.M.E. H700 mud pump and Cat D343 diesel engine,Ideco travelling block with 360 ton hook, National N845 swivel  Price:  $1,350,000

 

 

OIME E-3000  (Ref#2059N)

Substructure, Derrick and Accessories

Substructure:  Parco Raised Floor, 57’ x 43’ x 32’ – 34’ ground level to kelly bushing, setback capacity 975,000#, total capacity 1,500,000#

Substructure accessories:  catwalk, V-door deadline anchor

Derrick:  146’ Park 1,500,000# static hook load (14 lines), racking capacity approx 400 stands (triples)

Crown Block:  (7) 60” sheaves, (1) 72” fastline sheave

Air Hoists:  (1) air motor 10,000#, (1) Ingersoll Rand 10,000#

Tongs

Casing Stabbing Board

Pine Spinners: Gray Mark 10

Derrick accessories:  ladder, standpipe, tong counter weights, racking board, Geronimo line, lights in derrick and rig floor

Lifting and Drilling Equipment:

Drawworks skid 27’ x 9.25”, power skid 27’ x 10’, Model OIME E-3000 3000hp, Elmagco 7838 Electric aux brake, driller’s console, Crown-o-Matic, (3) EMD D79 electric traction motors, Foster catheads

1-1/2” drilling line, drilling line spool

Ideco 750 ton travelling block

BJ Dyna-Plex 750 ton hook

Continental Emsco LB650 650 ton swivel

Ideco LR-375 rotary table, 37-1/2” opening, master bushing, kelly bushing

650 ton x 144” elevator links

International Tool Company kelly spinner

High Pressure System

Mud pump:

Continental Emsco FB-1600, 1600 hp triplex, (2) GE 753 DC electric motors

Continental Emsco FB-1600, 1600 hp triplex, (2) EMD D79 electric motors

Gardner Denver PZ-10, 1350 hp, power GE 752

Charger Pump:  (3) 6 x 5 x 11 w/75 hp electric motors

Standpipe manifold

Low Pressure System

Shale tank:  570 bbl, 40’ x 12’

Intermediate tank:  570 bbl, 40’ x 12’

Suction tank:  570 bbl, 40’ x 12’

Trip tank:  130 bbl

Premix pit:  100 bbl

Solids Control Equipment:

(2) Derrick L148 flo-line linear motion

(2) Mission Magnum 5 x 6 75hp centrifugals

Desander:  Totco (2) 12” cones

Desilter:  Total (12) 4” cones

Degasser:  Swaco vacuum

Pit Stirrers:  (5) 10 hp stirrers

Mud Mixing Pumps:  (3) Mission Magnum 5 x 6 100hp centrifugals

Water tanks:  (1) 500 bbl 43’ l x 10’ w – rectangular.  (1) 500 bbl 35’L x 10.5” dia – cylindrical.

20,000 gal diesel tank, 43’ x 10’

Mud/gas separator:  26’ x 8’ x 72” diameter

Power System

(3) Cat D399TA diesel engines

(3) KATO 1000 kw generators

(1) Gardner Denver 30 hp air compressor

(1) Sullivan Palantek 50 dg air compressor

(1) Quincey 4-cylinder air compressor

Power Systems Houses

(1) Ross Hill 1600 SCR house ()48’ x 11.5’)

(3) Genertor House (43’ x 12’)

(1) Air compressor house (43’ x 10’)

Doghouses:

45’L x 10’W, Matheny Explorer 1600 Surveyros

Off driller side house:  45’L x 10’W

Junk baskets, mud house, rig manager’s house, parts houses, change house, power washer, 3x2x13 centrifugal pump, 30 hp electric motor

Well Control Equipment

BOP Stack:  11” rotation head, (1) Hydril GK 13-5/8 x 10,000# annular preventer, Cameron Type U 13-5/8 x 10,000# double ram preventer, 13-5/8 x 10,000# mud cross, Cameron Type U 13-5/8” x 10,000# single ram preventer, (2) 2” x 10,000# gate valves, (1) 2” x 10,000# chick valve, (1) 4” x 10,000# gate vale, (1) 4” x 10,000# HCR valve

(1) closing unit, 9 station, 300 gallon triplex, air actuated charging pumps

(1) remote closing unit, floor mounted in drillers dwog house

Choke Manifold:  (1) 2” x 10,000# gae valve with pressure gauge, (6) 4” x 10,000# gate valves, (1) 2” x 5,000# adjustable choke, (1) 2” x 5,000# positive choke

Kelly Cock Valves:  lower – size and rating upper

Float Valves – Quantity and Type available

Drilling Tools:  elevators, tongs, slips, safety clamps, casing rabit, bit breaker

Drilling String:

Drill pipe: Range 2:   379 joints of 5”, 19.5 lb/ft, G105, NC50 connection;  46 joints of 5”, 19.5 lb/ft, S-135, NC50 conn

Drill Collars:  24 joints of 6-1/2”, 12 joints of 8”

5-1/4”  hex kelly 46’ with NC50 conn

Bits subs, cross overs

Drilling Instruments:  driller’s console,

Price:  $10,500,000

 

 

OIME 1500 MEHCHANICAL DRILLING RIG  (Ref#2365N)

OIME 1500 HP drawworks us manufactured w/ 3 engine compound w/ c18 CAT engines & transmissions, drillers console & OIME catworks. Pyramid approx. 152ft cantilever mast. 1,000,000 lb gross nominal .21′ split level substructure.

Mud Pumps

BOP Equipment

Houses & Pits

Equipment

Handling tools (all rebuilt w/ load test or new)

Misc. Equipment

LOCATED USA – NOT USED SINCE REWORKED

Price:  $6,800,000

 

TFI-1000M  MECHANICAL 1000 HP DRILLING RIG  (Ref#8022N)

Manufactured 2006 – refurbished:

Installation of new drawwroks, upgraded to 1-1/4”drill line

Mud system modification to allow close loop circulation option

Engineering study to increase mast height to 139’, increasing hook load from 550,000# to 660,000# and allowing for a wider range of top drive options

Rebuilt or serviced all ancillary equipment

The rig was built in 2006 to drill in the Barnett Shale play where it drilled both vertical and horizontal weels of depths from 9000 TVD with laterals from 3000-5000’.

DRAW WORKS

Drilling Unit:                          TFI-1000M 1000hp mechanical DW.

Compound:                          TFI double engine in line compound.

Engines:                                Two (2) CATERPILLAR C-15 Diesel engine-Electric Start-Radiator-Gauges-TWIN DISC F-11561-TC Torque converter

Brake:                                    Eaton Disc Brake

DERRICK

Mast:                                      BHL 131’H Cantilever

Static Hook Load:                550,000 Lb.

Crown Block:                        (5) Sheave Cluster & (1) Fast line Sheave grooved for 1 ¼” line

Other:                                     Racking Board, Tong Counterweights, Ladder, Derrick Climber, 4” Standpipe & Manifold.

SUBSTRUCTURE

Type:                                      Shop built 22’W x 19’ H x 49’ L Box Substructure, w/ Pony, Rotary Beams, V-door ramp, (3) Stairs, Safety Rails, (2) 200 gal. Air Receiver Tanks, Skidded.

ROTATING EQUIPMENT

Rotary table:                         27 ½ “ National Rotary Table w/Split Master Bushings

Swivel:                                   National N-69 300 Ton

Kelly Spinner:                       INTERNATIONAL TOOLS Model OWI 1500

Other:                                     5 ¼” X 45’ Hex Kelly and VARCO Kelly Drive Bushing, w/Rollers

TRAVELING EQUIPMENT

Block:                                     CONTINENTAL-EMSCO RA-36 250 Ton Block/Hook Combination, 108” Elevator Links

INSTUMENTATION

BEAR 500,000 Lb. Weight Indicator

Satellite Automatic Driller

STAR 3-Pin Recorder

O’DRILL Type D 5000 Psi. Mud Gauge.

HANDLING TOOLS:

OWI 35C7 Pipe Spinner, Chain Drive

WEB WILSON Type B Rotary tongs with assorted heads

BYRON JACKSON MGG 5” 250 T. Drill Pipe Elevators

BYRON JACKSON MMG 6” 150 T. Drill Collar Elevators

5” Drill Pipe slips, 12 segment Drill Collar Slips.

(2) Sets Drill Collar Safety Clamps, Mud Bucket

WATER TANK:

SHOPBUILT 9’W x8’H x40’L, 494 Bbl. Water Tank. Skidded.

(2) MCM 1 ½ “x2” Centrifugal Water Pumps, p/b 5hp. Elec. Motors.

SHOPBUILT 4’W x4’H x6’L Lubester w/(3) Compartments, Mounted on 35’L x8’ W Junk box.

RIG HOUSES

Upper Doghouse                 Shop built  8’ W x20’ L w/(6) lockers, Bench Storage, Cabinets, Microwave, Heater, Lights

Lower Doghouse:                Shop built 8’ W x 40’ L Parts/Change house, w/ (12) Lockers, Shelves, Workbench, Benches, Heater, Lights, Skidded.

Utility House:                        Shop built 10’ W x40’ L Utility House w/ (2) 15’ L Covered Porches, Lights, Skidded.

GENSET

Generator No. 1:                  DMT - 670C 600Kw. AC Generator, p/b CATERPILLAR 3412 Diesel Engine, w/ Electric Start, Fuel Day Tank, Radiator, Gauges.

Generator No. 2:                  LIMA 625 Kw. AC Generator, p/b CATERPILLAR 3412 Diesel Engine, w/ Electric Start, Fuel Day Tank, Radiator, Gauges.

CURTIS RS30B Rotary Screw Air Compressor p/b 30 Hp. Electric Motor, Mounted on 130 gal. Air Receiver Tank.

GENERAL ELECTRIC Electrical Panel

FEDERAL PACIFIC 45 Kav. Transformer

SHOPBUILT 10’ W x40’ L Utility House w/ (2) 15’ L Covered Porches, Lights, Skidded.

ELECTRICAL SUITCASES (10)

MUD PUMPS

Pump:                                    Two (2) F.E.S. MZ-9 1000HP Triplex Mud Pumps w/ Forged Steel Fluid Ends, Quick Change Caps, 5000 Psi. Pulsating Dampener, MISSION 5”x6” Centrifugal Charging Pump. O’DRILL 3” Shear Relief Valve, O’DRILL Type D 5000 Psi. Pressure Gauge, Master Skidded w/ engine.

Pump power:                        Two (2) CATERPILLAR D-398 Diesel Engine w/ Air Start, Radiator, Gauges, Mounted Pump Master Skidded  

MUD SYSTEM

Suction Tank:                       Shop built 10’ W x6’ H x40’L, 411Bbl. Suction Tank w/6’L Covered Porch, (3) Compartments, (2) MAXX 2000 7.5 Hp. Mud Agitators, Internal Plumbing, Flat Bottom, Top Mounted Walkways, Safety Rails, Stairs, Lights, Skidded.

Shaker tank:                         SHOPBUILT 10’ W x6’ H x40’L, 411 Bbl. Shaker Tank w/ 6’L Covered Porch, (3) Compartments, (2) MAXX 2000 7.5 Hp. Mud Agitators, Internal plumbing, Flat Bottom, Top Mounted Walkways, Safety Rails, Stairs, Lights, Skidded.

Shale shaker:                       Dual VORTEX ORBITAL 3000, Single Screen, Linear Motion Shale Shaker

De-sander:                            BAKER 5” X6” Centrifugal De- silter Pump p/b TESCO 50 Hp. Elec. Motor, VORTEX De sander w/ (2) 10” Cones.

De-silter:                                BAKER 5” x6” Centrifugal De-silter Pump p/b TESCO 50 Hp. Elec. Motor, VORTEX De- silter w/ (6) 2” Cones

Mixing:                                   Two (2) BAKER 5” x6” Centrifugal Mixing Pumps, p/b TECO 50 Hp. Electric Motor.                            

WELL CONTROL EQUIPMENT

Annular:                                 Regan Type K Annular BOP, 11” X 3,000 Psi.

BOP:                                       Cameron Type U Double Blowout Preventer 11” X 5,000 Psi. w/ 5000 X 3000 Psi Drilling Spool.

Closing Unit:                         CPC 4-Station Closing Unit w/ triplex Pump, powered by TECO 20hp.Elec.Motor, (2) Air Pumps, 145 gal. Reservoir Tank, (12) bottles, Gauges, Lights, Mounted on 6’W x 12’L Skidded

Remote unit:                         4-station Remote Closing Unit-Mounted on Doghouse Porch

Manifold:                               JMP 5,000 Psi. Choke Manifold w/ (1) 5 way Cross, (2) 3 1/8”x 5M Gate Valves, (5) 2 1/16”x 5M Gate Valves,(2) 2 1/16” Adjustable Chokes, O’DRILL Type D 5M Pressure Gauge, Skid Mounted.

Kill Line:                                Two (2) 2 1/16”x 5M Gate Valves

Choke Line:                          Two (2) 3 1/16” x 5M Gate Valve

ANCILLARY EQUIPMENT

Catwalk:                                SHOPBUILT 5’W x42”H x48’L Single Section Catwalk w/Steel Deck

Pipe racks:                            Four (4) Sets of 42”H x28’L Pipe Racks

                                                One (1) Set of 36”H x 28’L Pipe Rack

                                                One (1) Set of 10”H x 28’L Pipe Rack

Hoist:                                      Two (2) JOY 4000Lb. Air Hoist

Fuel tank:                              SHOPBUILT 8,000 gallon fuel tank with lubester w/(3) compartments skidded

3750ft. 1 ¼” New Drilling Line

3 ½ “ x60’L Rotary Hose

3 ½ “x20’L Vibrator Hoses

(2) 8” x10’L Suction Hoses

Rat hole and Mouse hole .(9 5/8” Dia. Mouse hole)

Florescent and Mercury-Vapor Rig Lights

Miscellaneous Fire Extinguishers, Spare Parts, Hand Tools, Etc.

Drilling Collars

25 Joints 6 ¼” OD* 31’, 4 ½ XO, 99lb per foot, Slick Collars and Hard Band

Available for lease or sale         Price:  $6,800,000

 

 


CROWN 1000 HP MECHANICAL SKID MOUNTED DRILLING RIG  (Ref#14886N)

Assembled and manufactured in 2007/2008 (Brand New)

118’ x 440,000# mast, racking board, makeup and breakout assembly

Crown CE1000SD singel drum drawworks (rated for 1000 hp)

(2) Detroit diesel Series 60 diesel engines

(2) Allison S5610H transmission

Crown 2-engine compound, right angle gearbox, air system, fuel system

12,000# winch, 8,000# winch, deadline anchor, drill line spool rack 3000’ of 1-1/4” line capacity

Substructure: 6.85m (22.4ft) floor height

Hook/block, elevator links, swivel, 27-1/2” rotary table, rotary drive system, rotary torque indicator

Torque wrench and spinner

(2) WS-1000 Quadraplex 1000 hp mud pumps with Detroit diesel engine, mud tanks, mud shaker, desilter, mud agitator, vacuum degasser, centrifugal pumps, trip tank, shaker/cutting tank

Driller’s cabin

BOP control unit 27 accumulator @ 10 gal (38l), 3000 psi working pressure, 4500 psi test pressure

3-1/8” API 5,000 choke manifold550 kVa electric generator, 50 Hz, 400/230V, Volvo Penta 6 cyl engine

400 kVA electric generator, 50 Hz, 400/230 V, Volvo Penta engine

Drill pipe:  3100m 3-1/2”, 2010m 5”, 1000m 2-7/8”

Rig is rigged up in Europe.  Drilling began, but project was shut down

Price   €4,600,000 EUROS

Example of shipping costs:

36 truck loads, volume 1750 cubic meters, weight 450 ton

Shipping costs includes, loading and trucking to Hamburg Port, ocean freight to Libya (including unloading)

The loads are 6 open top flat racks, 8 container loads, 22 positions on ship

Shipping to Libya is €340,000

Shipping to Salvadore €267,500  (service every 14 days;  transit time 20 days

 

CROWN/DUKE CE1000SD 1000HP DRILL TO 13,500’  (Ref#797Ra)

Drawworks
Crown/Duke CE1000SD 1000 HP rated to 13500ft with 4 1/2in Drill Pipe grooved for
1 1/4in drilling line
Power:
2 Detroit Series 60 Engines 505 HP each at 2100 RPM
Mast and Substructure
Crown guyed & telescoping 118ftH x 19ft 6in W 440000 lb Static Hook Load with skid mounted manually raised telescoping substructure 16ftH x 21ft 6in W 15.0 KB
Triplex Mud Pump:
2 MZ 1000 1000 HP Pumps each driven by two 2 Detroit 60 Series Engines 565 HP each
Rotating and Traveling Equipment:
Hacker Pyramid 20 1/2in x 44in Rotary Table
Mc Kissick 265 Ton Block Hook
Skytop 250 Ton Swivel
ABB Offshore Crown Block Saver
Oilworks Kelly Spinner and Pipe Spinner
BOP Equipment:
-Hydril GK, 11” x 5,000 psi Annular BOP
-Shaffer LWS, 11” x 5,000 Double Hydraulic BOP
-Koomey Type 120, 6 Station, 120 Gallon Accumulator with Remote Panel
-5,000 psi Choke Manifold
Generators:
(2) Detroit Series 60 Diesel Engines with 375 KW Generators in Utility House with (1) Sullair Air Compressor and (1) IR 80 Gallon Air Compressor
Mud System:
-(1) 750 Bbl, two (2) Tank Mud System, 10’ x 54’ x 7-8” with agitators
-(2) Swaco Mongoose high G Linear Shale Shakers rate to 650 gpm
-(1) Swaco 10 Cone Desilter
-(1) Swaco 2 Cone Desander
-(5) Swaco Mud Agitators and (5) low pressure mud guns
Drill Pipe and Drill Collars:
-12,5000’ 4-1/2”, 16.60 lb/ft G-105 Drill pipe with XH Connections
-(18) 6-1/2” OD x 2-1/4” ID Drill Collars with 4-1/2” XH Connections
-(3) 8” OD x 2-13/16” ID Drill Collars with 6-5/8 Regular Connections
PRICE:  $6,250,000 EACH  (2 available)

 

 

CROWN/DUKE CE750SD  (Ref#2930Na)

Drawworks:  Crown/Duke CE750SD (900 HP), Rated to 11,500' with 4 1/2" Drill Pipe

Power: (2) Detroit 60 Series engines, 540 HP Each @ 2100 RPM

Mast and Substructure:

Crown (guyed I telescoping), 118' H x 19'6"W, 375,000# SHL, w/Skid mounted Manually raised telescoping substructure -18'H x 21 '6" W (15.0' KB)

Pump #11 #2: MZ - 9 (1000 HP) Triplex Pumps - Each wI Caterpillar 3508 (1000 HP)

Rotating and Traveling Equipment: Hacker Pyramid 20-1/2" x 44" Rotary Table

American Block 200 Ton Block, American Block 200 Swivel, ABB - Offshore Crown Block saver

B.O.P. Equipment:   Horn Spherical, 11" 5000 PSI Annular BOP Horn L WS, II" 5000 PSI Double Hydraulic BOP

Koomey Type 120, 6-Station, 120 Gallon Accumulator wIRemote Panel 5000 PSI Choke Manifold

Generators:   (2) Caterpillar CE 15 w/375 KW Generators, (1) Both In Utility House W/Atias Copco Air Compressor

Mud Systems:  (1) 750 Barrel (Two Pit) Mud System, 10" X 54" X 7'8" with agitators (1 ) - Derrick High G Linear Shale Shaker, (1) - Derrick 10 Cone Desilter, (1) - Derrick 2 Cone Desander

Drill Pipe and Drill Collars:  Approx. 11,000' 4 1/2" XH, Grade G 16.60# Drill Pipe, (18) -6 1/4"OD x 2 1/4"ID Drill Collars with 4-1/2" XH Connections

Price:   $8,350,000

 

DUKE 750 DRILL RIG  (Ref#4079R)  Built 2008, 118’ x 350000# mast on 6 axle carrier, Series 60 Detroit diesel engine (575 hp), 6 speed transmission, 14’6” cantilever subbase with 27-1/2” rotary table and matt boards for carrier, 2008 Fluid Design Solutions 150 ton hydraulic top drive, (2) Mud King MPZ9 100 hp mud pumps with Cat C27 engines, Allison 8900 Series transmission, 450 kw Detroit generator and 255 Cat generator in house, 750 bbl two tank pit system with mixing pumps, shale shakers, agitators and mud guns, top and bottom doghouses, 8000 gal fuel tank with pump, 300 bbl fresh water tank with wash ump, center tub with V door, stacked  Price:  $3,800,000

 

CROWN/DUKE CE750SD  (Ref#2930Nb)

Drawworks:  Crown/Duke CE750SD (900 HP), Rated to 11,500' with 4 1/2" Drill Pipe

Power:   (2) Caterpillar CE 15 engines, 540 HP Each @ 2100 RPM

Mast and Substructure: Crown (guyed I telescoping), 118' H x 19'6"W, 375,000# SHL, w Skid mounted Manually raised telescoping substructure -16'H x 19'6" W (13.0' KB)

Pump #11 #2: MZ - 9 (1000 HP) Triplex Pumps - Each wI Caterpillar 3508 (1000 HP)

Rotating and Traveling Equipment: Hacker Pyramid 20-1/2" x 44" Rotary Table

American Block 200 Ton Block, American Block 200 Swivel, ABB - Offshore Crown Block saver

B.O.P. Equipment: Horn Spherical, 11" 5000 PSI Annular BOP Horn L WS, II" 5000 PSI Double Hydraulic BOP

Koomey Type 120, 6-Station, 120 Gallon Accumulator wIRemote Panel 5000 PSI Choke Manifold

Generators: (2) Caterpillar CE 15 w/375 KW Generators, (1) Both In Utility House W/Atias Copco Air Compressor

Mud Systems: (1) 750 Barrel (Two Pit) Mud System, 10" X 54" X 7'8" with agitators (1 ) - Derrick High G Linear Shale Shaker, (1) - Derrick 10 Cone Desilter, (1) - Derrick 2 Cone Desander

Drill Pipe and Drill Collars:

Approx. 11,000' 4 1/2" XH, Grade G 16.60# Drill Pipe

(18) -6 1/4"OD x 2 1/4"ID Drill Collars with 4-1/2" XH Connections

Price:  $8,350,000

 

CROWN 500 SERIES CE600DD WELL SERVICE RIG  (Ref#13392T)  Manufactured 2006, Drawworks complete with 48” Pneumatic disc assist brake, Detroit Series 60 diesel 14.L engine complete and rated to 475 hp (engine is blown, will replace), Allison 5860DB transmission with drop box and disconnect to rear drive axles, 5 forward, 1 reverse, 104’ x 250,000# 4-leg mast, rod racking board, mounted on 5 axle carrier with Reyco front suspension, Hendrickson rear suspension, 4 hyd leveling jacks, 2 mechanical jack screws, 250 gal hyd tank, 120 gal fuel tank, toolboxes, walkways, handrails, operator’s platform, air controls and hydraulic controls at deck level in rear, working floor to 8’ level, folding wings, Brraden PD12C-1 winch 12,000#  Price on Request

 

CROWN 500 SERIES CE600DD WELL SERVICE RIG  (Ref#13393Ta)  Manufactured 2007, Drawworks complete with 48” Pneumatic disc assist brake, Detroit Series 60 diesel 14.L engine complete and rated to 475 hp, Allison 5860DB transmission with drop box and disconnect to rear drive axles, 5 forward, 1 reverse, 104’ x 250,000# 4-leg mast, rod racking board, mounted on 5 axle carrier with Reyco front suspension, Hendrickson rear suspension, 4 hyd leveling jacks, 2 mechanical jack screws, 250 gal hyd tank, 120 gal fuel tank, toolboxes, walkways, handrails, operator’s platform, air controls and hydraulic controls at deck level in rear, working floor to 8’ level, folding wings, Brraden PD12C-1 winch 12,000#, completely tooled  Price:  $465,000

 

CROWN 500 SERIES CE600DD WELL SERVICE RIG  (Ref#13393Tb)  Manufactured 2006, Drawworks complete with 48” Pneumatic disc assist brake, Detroit Series 60 diesel 14.L engine (blown, needs to be replaced) and rated to 475 hp, Allison 5860DB transmission with drop box and disconnect to rear drive axles, 5 forward, 1 reverse, 104’ x 250,000# 4-leg mast, rod racking board, mounted on 5 axle carrier with Reyco front suspension, Hendrickson rear suspension, 4 hyd leveling jacks, 2 mechanical jack screws, 250 gal hyd tank, 120 gal fuel tank, toolboxes, walkways, handrails, operator’s platform, air controls and hydraulic controls at deck level in rear, working floor to 8’ level, folding wings, Brraden PD12C-1 winch 12,000#, completely tooled.   Price:  $465,000 (less price of replacement motor)

 

CROWN (Stewart Stevenson) 500 SERIES CE600DD WELL SERVICE RIG  (Ref#13393Tc)  Manufactured 2008, Drawworks complete with 48” Pneumatic disc assist brake, Detroit Series 60 diesel 14.L engine complete and rated to 475 hp, Allison 5860DB transmission with drop box and disconnect to rear drive axles, 5 forward, 1 reverse, 104’ x 250,000# 4-leg mast, rod racking board, mounted on 5 axle carrier with Reyco front suspension, Hendrickson rear suspension, 4 hyd leveling jacks, 2 mechanical jack screws, 250 gal hyd tank, 120 gal fuel tank, toolboxes, walkways, handrails, operator’s platform, air controls and hydraulic controls at deck level in rear, working floor to 8’ level, folding wings, Brraden PD12C-1 winch 12,000#, completely tooled  Price:  $465,000

 

 

STEWART & STEVENSON (FORMALLY CROWN) 500 SERIES CE600DD WELL SERVICE RIG  (Ref#13394T)  Manufactured 2008, Drawworks complete with 48” Pneumatic disc assist brake, Detroit Series 60 diesel 14.L engine complete and rated to 475 hp, Allison 5860DB transmission with drop box and disconnect to rear drive axles, 5 forward, 1 reverse, 104’ x 250,000# 4-leg mast, rod racking board, mounted on 5 axle carrier with Reyco front suspension, Hendrickson rear suspension, 4 hyd leveling jacks, 2 mechanical jack screws, 250 gal hyd tank, 120 gal fuel tank, toolboxes, walkways, handrails, operator’s platform, air controls and hydraulic controls at deck level in rear, working floor to 8’ level, folding wings, Brraden PD12C-1 winch 12,000#  Price on Request

 

BW SELF PROPELLED (Ref#1474N)  Fully equipped Canadian rig

Carrier:  BW Self Propelled Tandem/drive

Engine:  Detroit Diesel 6TV92

Derrick:  17.4 m 55,000 DaN

Tubulars:  Range III Capacity

Hydraulic Top Drive:  8000 Foot Pounds @165 rpm

Fuel Capacity:  Day Tank

Depth Rating:  1,700 m

SUBSTRUCTURE

Dimensions 16.25 m Long x 3.61 m Wide

Lift:  Hydraulic Ramp

Hydraulic Loading Arm: Drill pipe and collars to 275 mm

KB:  3.70 m

BLOWOUT PREVENTERS-CLASS III

Annular Type:  Townsend 84 229 mm 21000 kPa

Single Gates (2):  Townsend 88 229 mm 21000 kPa

NACE trimmed:  Yes

DOG HOUSE

14,000 L fuel

HYDRAULIC PIPE TUBS

Number:  2

Catwalk:  Yes

Pipe Racks:  2 Sets

MUD PUMP

Type:  National Oilwell K-380

Rated 375 HP

Liner:  140 mm x 356 mm Strokes

Fuel:  Day tank

MUD TANK

Capacity:  40 m3

Shale Shaker:  DFT 500 b-2 linear

Mud Mixing:  Centrifugal Mission Pump

BOP Manifold:  75 mm x 50 mm 21,000 kPa

DRILL PIPE (UPSET)

Joints:  155

Size:  102 mm

Length:  Range 2

Connections:  3 1/2" x XH

DRILL COLLARS

Joints:  10, 4

Size:  120 mm, 162 mm

Length:  Range 2

Connections:  3 1/2 IF, 4.5" x XH

COMBINATION BUILDING

Water:  35 m3

Fuel:  Day Tank

Change House:  Yes

Light Plant:  200 KW Generator

Accumulator:  Koomey 4 Station 300L

MOUNTED AIR COMPRESSOR

NO

BOILER

Horse Power:  80

Water:  16 m3

Fuel: Day Tank

TOOL PUSH SHACK

3 m wide x 13.68 m Long

LOADS

Summer:  9

Winter:  10

Price On Request

 

 

1600HP UPETROM F200-2DH DRILLING RIG  (Ref#14187T)   Fully Refurbished Feb-Nov 2010.

The F200 rig is an enhanced version of the F200 2DH-3 adapted for use by both MB-820 thermal engines and dual DC electric motors of type MCF 3-EXPIT3-542x370-6.

137’ x 883,000# MA-250 Upetrom mast, max working hook load 10 lines 551,875 lbs.

Upetrom substrcuture 4.4m drill floor height, 3.01m clear height under substructure, 441,000# (200mT) max static load at rotary table

6-sheave, 662,000# max hook load Upetrom 6-32-GF 300 Crown Block

5 sheave, 662,000# max load Upetrom 5-32-MC 3000 travelling hook block

880,000# max static load Upetrom CH-320 swivel

27-1/2”, 500mT max static load Upetrom MRL275 rotary table

1600 hp Upetrom TF25 drawworks, no engines but is adapted to use diesel or DC motors

700 HP 2PN700 mud pump (driven by rig’s engines)

Upetrom CH 6U-76 BOP control unit

Power plant: power control with/SCR and electrical distribution unit room, air unit plant with air compressor, flow rate 50m3 with Ac engine power

Miscellaneous rig/Camp equipment including doghouse (mounted on rig floor), warehouse container, fuel storage unit complete with manifolds 19m3 (1pcs), (2)lighting towers

Accessories:  traveling casing board, wireline guide, hoist winches type TP1200, mig welder 300-650 amp, welding machine, welding cable, 2 stage compressor 380v 17kw 50 hz, sandblaster (2 pcs)

Located Europe

Price:  1,950,000 Euros  Price Reduced:  895,000 Euros

 

 

LCI 2000 HP SCR RIG PACKAGE  (Ref#2139R)
Rigged Up and Ready for Testing
Mast
DSII 147’x13’x1000K – Three Section Tubing Mast with crown containing six main cluster sheaves and one fastline sheave. Mast to include racking board and integrated top drive tracks.
Substructure
DSII 30’ High Winch Raised 1,000,000# casing, 800,000# setback, complete with four sets of stairs, v-door, etc.
Drawworks
LCI-2000 HP, grooved for 1-3/8” drill line with two refurbished G.E. 752 series wound DC traction motors, Model K Auxiliary Brake, Crown-o-Matic.
Mud Pumps
Two EWECO 1600 HP packages each with master skid, two GE 752 series wound DC traction motors, drive sheaves, belts, belt guards, charge pump, liner wash system, etc.
Rig Power
I.D.M. 4x4 SCR System/Control House with 1000 KVA main transformer, 225 KVA lighting transformer and adequate MCC to operate the rig.
Four Caterpillar 3512C diesel engines each with Caterpillar SR4, 1750 KVA generator and radiator.
Each Engine generator is set on a 10’ wide x 40’ long master skid with roof, muffler, etc.
Two Gardner Denver 50 HP compressors, cold start, air dryer and two volume tanks to be included.
Top Drive
Canrig 500 Ton Top Drive – Model 8050 AC with DSII incorporated top drive tracking system.
Mud System
1500 BBL., 3-tank mud system complete with two 10 HP agitators, seven 7 HP agitator, six 5x6 centrifugal pumps with 75 HP motors, three Fluid Systems shakers, one Derrick Vacuum Degasser – 1200 gpm, one Fluid Systems Mud Cleaner, two High Shear Mud Hoppers.
Miscellaneous
Single Porch Driller’s Side Doghouse
Mech./Warehouse Workshop
American Block 500-Ton block.
American Block 37.5” Rotary Table.
100 BBL Trip Tank/ Choke Manifold/ Poor Boy Degasser Combo Unit
1200 Gallon Closed Loop Brake Water System complete with two centrifugal pumps, plate heat exchanger, and safety alarm package
48”x22’ Mud/Gas Separator with Transport Skid
Accum/Junk Bin Skid with New 7 Station Closing Unit.
BOP Handling Rails Mounted in Substructure with 50 Ton Hercu-link system
13-5/8”, 10000# Control Flow Single and Double BOP
13-5/8”, 5000# Hydril Annular
OCO Model 80D BOP Closing Unit
12,000 Gallon Fuel Tank with transfer pumps
Three (3) 500 BBL Water Tank
Drill Line Spooler with 7500’ of 1-3/8” Drill Line
NOV ST-80 Iron Roughneck
Canrig Powercat 3000 42” x 60’ Automated Catwalk
MiSwaco Centrifuge
Pipe, Collars, Handling Tools
(2) ATCO Tool Pusher Houses
Elevator 350 ton for 5in Drill pipe
Vibrator Hose
Rotary Hose
AOI Advanced Driller Monitoring System
Drilling Recorder with 8 pen printer

Drilled 3 wells

Price:  $17,000,000

 

 

NEW AND NEAR NEW 1000 HP AND 1300 HP CHINESE RIGS – LOCATED USA  (Ref#10008R)

1000 HP RIGS – 6 AVAILABLE  (Ref#10008Ra) – 10,000’ DEPTH CAPACITY

Single Drum Drawworks JC28B with hydromatic brake, Auxiliary brake WPT 324, hydraulic winch YJ3C 5-ton, dealine anchor, 125’ x 396,800# capacity mast with racking platform, stands 168 jts of 4-1/2” drill pipe

19’7” swing up substructure, accommodates 20.5 or 27.5” rotary table with rotary beam clearance of 15’7” for BOP stack, elevated stand designed to accommodate 30’ top dog house, V door slide and 2 sets of stairs

(2) Detroit Series 60 diesel engines each with S6610H transmission

4 axle trailer mounted

Located Texas

Price:  (1) 100% new, complete  -  $900,000

Price:  (1) used 1-1/2 years, complete - $700,000

Price:  (4) not complete – requires $150,000 spare parts and labor to make complete - $600,000 each

 

1300 HP RIGS – 3 AVAILABLE  (Ref#10008Rb) – 14,000’ DEPTH CAPACITY

Single Drum Drawworks JC28B with hydromatic brake, aux brake WPT 327, hydraulic winch 4J3C 5 ton, dead line anchor, 125’ x 505,000# mast, can string 10 lines 1-1/4” drill line with racking platform, set for working doubles,

19’7” swing up substructure, accommodates 20.5 or 27.5” rotary table with rotary beam clearance of 15’7” for BOP stack, elevated stand designed to accommodate 30’ top dog house, V door slide and 2 sets of stairs

(2) Detroit Series 60 diesel engines each with S6610H transmission

5 axle trailer mounted

Just back from field

Located Texas

Price:  $900,000 each

 

1300HP DRILLING RIG JC28B (SIMILAR TO COOPER)  (Ref#8935R)  1300HP drawworks, 2 CAT C-16 engines 650hp each, Allsion S6610HR transmission, hydraulic power station YD160, mounted on 6 axle trailer, substructure 20’ high, under roller beam 16’, 27 ½” rotary table, Derrick- 125’ x 500,000# static hook load, capacity 4 ½ DP x 13500’, top driller control house: driller console roomSZF-TZJ40, substructure for driller’s console dimensions 18.5’ x 10’ x 12’. Travelling block YG225 x 500k, swivel 250k load rating, open hole 3”, 5 ton air winch.  PRICE:  POR

 

PULLING UNITS  (Ref#10798R) – Chinese Made (Petro-Machinery Group) – 4 Available

Manufactured 2006

101’ x 240,000# mast rating

Detroit 60 Series 500hp diesel engine with Allison transmission

Mounted on 6 axle carrier

Line, block

Walkways, stairways

Leveling jacks

Depth capacity 18,000’

Hydraulic leveling jacks

Price:  $285,000