Last updated: 03/08/2017 4:37 PM

HYDRAULIC / VIBRO HAMMERS, PILING EQUIPMENT AND OTHER MISC EQUIPMENT

CASAGRANDE CASING PULLER  (Ref#15800P34)  2 units available, 880mm to 1000mm capacity, new paint  $49,500 each unit

 

CASAGRANDE GCL 1500 CASING OSCILLATOR  (Ref#15800P35)  Manufactured 1990, complete with powerpack and hoses  Price:  $75,000

 

LEFFER 2500 OSCILLATOR MODEL VRM 250KL  (Ref#8930Ra)  2500mm diameter with 2200mm inserts, manufactured 2000, reconditioned 2011, located USA  Price:  $330,000

 

LEFFER VRM 200 OSCILLATOR  (Ref#5273R)  Manufactured 2000, short style for use under rig.  Drives casing up to 1200mm, reducers from 900mm-1200mm, oscillator weight approx. 15,000#, complete with power pack using Deutz 186 hp (136Kw) engine, located USA  Price:  $75,000

 

LEFFER DIAPHRAGM WALL GRABS  (Ref#15800P14)  5 sets available

  1. 7.6m x 1m
  2. 10m x 1m
  3. 9.5m x 1m
  4. 7.6m x 1.4m
  5. 10m x 1m

All reasonable offers considered

 

LEFFER OSCILLATOR (Ref#9101RC) no power unit  Price on request

 

EXPLORATION TECHNOLOGIES 1500MM OSCILLATOR WITH POWER PACK  (Ref#15586T)  Manufactured 2011, only used once and was completely rebuilt, 39,700# weight, 60” max casing diameter, 476,000# rated liftint force, 359,000# crowd force, 472,000 clamp force, 1,400,000# torque, 120” casing rotation, 16” stroke, 21’6”L x 8’4” W x 6’2”H Power pack with Cummins QSB6-TAA Tier 3 engine (needs to be replaced), Rexroth pumps and hydraulics with 3600 psi max working pressure, 33 gpm flow, 9’8”L x 5’8”W x 8’10”, 5,800# weight.  Also includes 4 inserts: 1000mm/42”, 880mm/36”, 750mm/30” and 620mm/24”, Please note engine is not operational and needs to be replaced.  Price, as is:  $152,000.

We can replace with new engine at additional cost.

 

TEI HCM550R DROCK DRILL ATTACHMENT  (Ref#9280Re)  Manufactured 2013  Price:  $75,000

 

TEI HEM550 DRILL ATTACHMENT (Ref#15236T)  Manufactured 2011, new and never used, remote control  Price:  $95,000

 

BRUCE HYDRAULIC SILENCE HAMMER  (Ref#12867Rb)  Manufactured 2010, hammer model SGH 1412, 160’ hanging leads, PQ300 power pak with Cummins QSL325 (only 289 hours as of May 2015), 30,865 ram weight  Price:  $270,000

 

INGERSOLL RAND CD 36-5 CLUSTER DRILL HOUSING  (Ref#4775Ra)

Uses 5 IR 380 series hammers or equivalent 8” diameter (not included), comes with 5 top subs, 8” BECO box & pin, currently set up for raise bore or for standard drilling, comes with shop/storage skid,

Minimum diameter             36”  (with (5) 8” hammers and (5) 8 7/8” hammer bits, less hammer could be used

Maximum diameter            40”

OD of cam                            34 ½”

Requirement CFM & PSI

            Low                2250 CFM – 125 PSI

            Medium         3250 CFM – 175 PSI

            High               4250 CFM – 225 PSI

Hammer are connected to cam with “0” rings and top nut.  Air is fed to hammer through channel.

good condition.

24” cluster drill  (ref#4775Rb)

Price:  $17,500

 

HMC 13X VIBRATORY DRIVER/EXTRACTOR  (Ref#10037R)  Manufactured 2001, very low hours, 30 ton suppressor with 1,100 in/lbs eccentric moment, 40 tons centrifugal force, 3700# weight (without C clamps), drive and extracts H-piles, trench plates, timber piles, guardrail posts etc., for use on excavator 70,000# or highter (Cat 330 and higher)  Price:  $35,000

 

APE MODEL 150 VIBRO HAMMER  (Ref#11871Rb)  Complete with 330 powerpack complete with new 100’ hose set and stand for hammer, everything recently reconditioned including hammer oil change, power pack oil change, all filters changed, only 527 hours on engine, unit in excellent condition  Price:  $105,000

 

APE 100  (Ref#7340T)  Manufactured 2013, mounted bracket for Cat 345, never used  Price:  $109,000

 

APE 400 HYDRAULIC IMPACT HAMMER (Ref#1796R)  Manufactured early 2000's, only used 2 times, complete with APE 90 Power Unit, Hose Bundle, Pile Bell Housing, Cap for 54" cylinder piles, tilt up stand, max rated energy 320,000#, 80,000# Ram Weight, 13,000# stiker plate weight, 147,000# total suspended weight, variable stroke, all hydraulic controls, 9' tall adjustable width bell housing, used for 54" diameter piles, paid $1,600,000 new  Price $400,000

 

APE 64X EXCAVATOR MOUNTED VIBRATORY DRIVER/EXTRACTOR  (Ref#11871Rd)  Manufactured 2012, 781 in/lbs eccentric moment, 30 tons drive force, 0 – 1650 frequency maximum (VPN), 32 ton max line pull, 4650# weight without clamps, 42.5” height without clamp, 70” length, 13.75” width  Price:  $55,000

 

APE D19-42 DIESEL HAMMER  (Ref#13210T) Hydraulic trip, recently inspected and refurbished and has not been used since, good condition   Price $32,500

 

ICE 812/815 VIBRATORY HAMMER  (Ref#6847N) upgraded from ICE 812, modifications performed by APE (all repairs and modifications can be verified by APE) at a cost of $48,000.  Modifications included:  all bearings replaced, all motors replaced, eccentrics upgraded, 1800 vibrations per minute, 4400 in3 (cubed) energy.  450 powerpack powered by new Detroit 892-500 hp engine, less than 150 hours since hammer and power unit were overhauled, 100’ hose bundle, unit runs strong.  Also includes: caisson beam and jaw for a 2 jaw arrangement to handle casing and 1 set of elastometric shock absorbers   Price:  $110,000  PRICE REDUCED:  $85,000

 

ICE 812 VIBRATORY UNIT  (Ref#15371Ra)  Manufactured 1980’s, 4000 in/lbs eccentric moment, 400 – 1600 VPM frequency, 100 ton clamp force, sheet clamp, 15,000# weight, comes with ICE 570 power pack with Cat 3408 engine and 100’ hose bundle, video demo available upon request.  Recently renovated and new paint in 2016.    Price:  $75,000  PRICE REDUCED:  $69,500

 

ICE I-62V2 PILE HAMMER  (Ref#7564R)  put into service May 2011, 14,600# rams with 165,000 ft/lb rated energy and 78,000 ft/lb minimum energy, hydraulic starting device and hydraulic power unit to run the hammer, also includes heavy duty lead guides for 32” x 8” open box leads, drive cap base with hammer cushion set, striker block and recoil dampener, DCP24 drive cap insert, DCA30 drive cap insert, 100’ of 32” x 8” leads with connecting hardwall.  New cost $250,000.  Price:  $199,000  PRICE REDUCED:  $172,000  PRICE REDUCED:  $157,500

 

ICE 416 VIBRO HAMMER  (Ref#1160Ta)  Price:  $95,000

 

ICE I-46V2 DIESEL HAMMER  (Ref#12958Rj)  with leads  price:  $70,000

 

ICE 80S PILE HAMMER  (Ref#1230Marine)  80,000 ft/lbs., minimum energy 32,000 ft/lbs., stroke at rated enginer: 10’, speed 38-55 blows/min, bearings 400 tons  Price:  $25,000

 

ICE 28B VIBRATORY HAMMER  (Ref#15576R)  Manufactured 2006, only 1500 hours, 5500 psi drive pressure, 4800 psi clamp pressure, 2800 in/lb eccentric moment, 1640 vpm frequency, complete with 350E power unit equipped with C C9 engine, clamps, remote control pendant and custom fabricated stand  Price:  $165,000

 

ICE 216 VIBRATORY HAMMER  (Ref#6402Tb)  with power pack  Price:  $60,000

 

ICE CAISSON BEAM  (Ref#11871Re)  7’ length with (2) ICE 100 caisson clamps, recently had seal replaced, excellent condition  Price:  $30,000

Also available at extra cost:  11’ caisson beam $10,000

 

HPSI 1600 VIBRO WITH POWER PACK  (Ref#1405Tc)  16,000 in/lb exciter, caisson clamp for driving up to 120” liners, 150’ hose bundle, Cat power pack, repaired Rexroth piston fixed motors (2015), repaired 5-stage commercial pump in 2015  Price:  $450,000

 

KRUPP HB-11A (Ref#7920R) hydraulic hammer drill, new never used, outputs 3000 impacts per minute with 2400 lbs blow force, requires 22gpm @ 2175psi for hydraulic operation  Price:  $25,000

 

PILING HAMMER (Ref#15473R) “like new” condition    Price:  $17,500 Canadian

 

PILECO D46 DIESEL HAMMER  (Ref#12958Rk)  Price:  $50,000

 

2010 BRUCE HYDRAULIC PILE DRIVING HAMMER (Ref#9101RB) only 280 hours, excellent condition  Price:  $270,000

 

2008 BRUCE HYDRAULIC IMPACT PILE HAMMER  (Ref#11871Rc)  never used, only test hours, Model SGH-0512, complete with power pak PQ-200 powered with Cummins 5.9L diesel engine (less than 250 hours), complete with drive cap  Price:  $120,000

 

DELMAG D5 DIESEL HAMMER  (Ref#8330R) Manufactured 1968 (original owner unit), complete with approx. 55’ leads in 3 sections and had 2 caps (one for timber piles and one for steel piles), last worked in 2013  Price:  $15,000

 

DELMAG D30 DIESEL HAMMER PACKAGE  (Ref#15371Rb) 

(2) Delmag D30 diesel hammers

195’ of leads (enough for 2 sets):

  1. 20’ bottom/stab sections
  2. 15’ tapered top sections
  3. 20’ intermediate sections

(3)   10’ intermediate sections

Total 195’ linear feet

Accessories include driving helmets, 15” square, 24” squar, sheeting helmets inserts, (2) Delmag fuel pumps, 18” follower homemade pile gates and other items

Price for everything:  $39,500

 

DELMAG D200 PILE HAMMER  (Ref#1160Tb)  Price:  $170,000

 

LINKBELT DIESEL HAMMER PACKAGE  (Ref#11871Ra) 

(3) Linkbelt 640 hammers with one-piece upper

(1) 520-640 Conversion, (2) 520 diesel hammers

(1) 520 upper and lower cylinder, 520 pistons, several 530-640 anvils, piston and starting blocks, concrete caps, (3) wood caps, (5) sheeting caps, (3) pipe caps, approx. $75,000 worth of spare parts, photos and parts inventory available on request

Make Offer

 

(Ref#13504R) (2) diesel hammers, good condition  Price on Request

 

BERMINGHAMMER B55-05 DIESEL HAMMER  (Ref#1153R)  Year 2005, ram weight x max stroke:  105,900 ftl/b (146 kn-m), impact energy 66,000 ft/lb (89 kn-m), ram weight/mass 9,200 lb (4,182 kg), blow per minute 36-60, operating weight 23,600 lbs (10,727 kg), guides for C18 VTL, toolbox, very good condition (only used for 3 months since purchase), located Canada  Price:  $90,000

 

BERMINGHAMMER VTL LEADS  (14181Ra)  135’ total, including:  extended lead sheave, (2) 39’ lead columns, 37’ Bollon lead column, 20’ load column, failead roller assembly, upper vertical travel block, lower vertical travel block, 25’ heavy duty hydraulic Vicker/spotter, upper BTL slide, lower VTL slide, torque resistant swivels (10-15 degrees), Kicker heel extension, lead foot, deflector sheave assembly, 9310 American boom tip connector, Roster sheave assembly and a few other items  Price:  $295,000

 

IHC S-800 HYDROHAMMER PACKAGE  (Ref#8787Ta)  Year 2013, max capacity 800kj, min capacity 88kj, rate 45 blows/min, (2) Power Packs P800 Volve 1662 Tier 4, 72” pile sleeve, (2) C34 control unit set, hydraulic hose bundle 60 meter, 72” up-ending cradle, set transfer/storage cradles for hammer, S-800 72” below, w-ring and accessories,   Price:  $2,300,000

IHC S-800 HYDROHAMMER PACKAGE  (Ref#8787Tb)  Year 2013, max capacity 800kj, min capacity 88kj, rate 45 blows/min, (2) Power Packs P800 Volve 1662 Tier 4, 48” pile sleeve, (2) C34 control unit set, hydraulic hose bundle 60 meter, 48” up-ending cradle, set transfer/storage cradles for hammer, S-800 48” below, w-ring and accessories, length 47.68’ x width 4.7’ x height (with shackle) 5.2’.  Price:  $2,300,000

 

IHC S-280 HYDROHAMMER PACKAGE  (Ref#8787Tc)  Year 2013, max capacity 280 kj, min capacity 31kj, rate 45 blows/min, (1) Power Pack P-800 Volvo 1662 Tier 4, 48” pile sleeve, (2) C34 control unit set, 48” up ending cradle, set transfer/storage cradles for hammer, S-280 36” below, w-ring and accessories, no hydraulic hoses provided  Price:  $1,200,000

 

IHC S-280 HYDROHAMMER PACKAGE  (Ref#8787Td)  Year 2013, max capacity 280 kj, min capacity 31kj, rate 45 blows/min, (1) Power Pack P-800 Volvo 1662 Tier 4, 36” pile sleeve, (2) C34 control unit set, hydraulic hose bundle 60 meter, 36” up ending cradle, set transfer/storage cradles for hammer, S-280 36” below, w-ring and accessories, no hydraulic hoses provided  Price:  $1,200,000

 

ICE QUAD CLAMP AND BEAM ASSEMBLY  (Ref#8787Te)  Year 2014, 7’ quad beam with (4) t-bars for use on ICE Model 66, 84 and 110 vibratory hammers, includes (4) ICE 100BH Cassion clamps.  Package Price:  $85,000

 

LEFFER LKG1-118 CAT (72”) SPHERICAL GRAB WITH 43” CONVERSION KIT  (Ref#8787Tf)  Two available,  Price:  $80,000 each

 

LEFFER LDG0-88 (36”) SPHERICAL GRAB WITH 42” CONVERSION KIT  (Ref#8787TgPrice:  $65,000

 

NPK H4XE HYDRAULIC HAMMER  (Ref#12958Rm)  Price:  $4,000

 

MKT V52 PILE DRIVER/EXTRACTOR SYSTEM  (Ref#12977R)  Brand new, never used.  Complete with Cat 700 hp hydraulic power pack, 150’ hose bundle, caisson beam with 12’ overall length and 2 caisson slamps, 201 tons driving force, 1650 cpm frequency, 5200 in/lbs eccentric moment, 100 tons clamp force, weight with clamp 16,850 lbs, power pqack weight 14,300.  Retail price:  $379,140  PRICE REDUCED FOR QUICK SALE:  $342,100

 

MKT V20 VIBRO HAMMER  (Ref#12958Ro)  2 units  Price:  $5,500 each

 

MKT DA-35C DIESEL HAMMER  (Ref#12958RL)  with leads  Price:  $7,500

 

STILLWELL AUGER CAST EQUIPMENT  (Ref#12620N) 

Double top head drive twin Staffa B200 with a 1:1 drive, approx. 16,000# torque

Hydraulic power unit Detroit 8V71 with 300 gallon hydraulic tank, 100 gallon fuel tank

Remote controls on 4 wheel trailer

65’ box leads, 3 guides for different size augers

50’ of 12” auger – unused

31’ of 14” auger – used one job

51’ of 16” auger – unused

48’ of 18” auger

To be used with 60 ton crane

Price:  $100,000    Price Reduced:  $80,000

 

PILING EQUIPMENT FOR SALE  (Ref#10801R)PRICES ON REQUEST

Diesel  Hammers

1 - D-30

1 D-19 with full set of leads

1 - D-8

1-D-12

2 - Offshore leaders

3 Pile Spotters

1 full fixed leader system

Misc. 

3 - Wood Pile Pullers

4  - sets of Beams and Caisson clamps

Numerous Sheet Pile Clamps

 

BAUER DOUBLE WALL CASING 1200MM OD – Slightly Used  (Ref#8346T)

Item

Qty

Price Each

Total

5m x 1200mm OD casing

12

$18,950

$227,400

3m x 1200mm OD casing

4

$15,250

$61,000

2m x 1200mm OD casing

4

$14,550

$58,200

1200mm OD shoe

3

$17,475

$52,425

Automatic casing driver

1

$87,250

$87,250

Rock auger 1200mm

1

$14,775

$14,775

1200mm digging bucket

1

$20,250

$20,250

1200mm digging bucket

1

$18,750

$18,750

TOTAL

 

 

$540,050

 

 

LEFFER DOUBLE WALL CASING  (Ref#15800P)

900mm (810mm ID) Casing String – 36.2m Total

(2) 2m joints, (2) 3m joints, (5) 4m joints, (1) 4.2m casing shoe

Price:  $90,000

850mm (780 ID) Casing String – 52.5m Total

(3) 2m joints, (8) 4m joints, (1) 5.5m joint, (1) 2m casing shoe, (1) 3.5m casing shoe, (1) 3.5m casing shoe

Price:  $100,000

800mm (710 ID) Casing String – 16m Total

(1) 4m joints, (2) 6m joints, no casing shoe

Price:  $27,000

750mm (660 ID) Casing String – 36.6m Total

(1) 1m joint, (3) 2m joints, (2) 3m joints, (2) 4m joints, (1) 3.5m casing shoe, (2) 3.4m casing hose, (1) 5.3m casing shoe

Price:  $85,000

700mm (630 ID) Casing String – 15.8m Total

(1) 3m joints, (1) 4m joint, (1) 3.8m joint, (1) 5m joint

Price:  $39,000

 

CASAGRANDE SINGLE WALL CASING  (Ref#15800P)

1180mm (1070 ID) Casing String – 16.1m Total

(2) 3m joints, (1) 3900mm joints, (1) 5.5m joints, (1) .700mm joint

Price:  $37,000

880mm (780mm ID) Casing String – 32.45m Total

(1) 500mm joint, (3) 750mm joints, (1) 1m joint, (12) 1.5m joints, (1) 1.7m joint, (1) 3m joint, (6) 1m casing shoe

Price:  $90,000

 

 

VARIOUS CASING 16” – 120”  (Ref#7794Td)