Last Updated: 05/22/2023 1:06 PM

BARGES FOR SALE

 

4000 CU YD SPLIT TYPE HOPPER DUMP BARGE  (Ref#3703) 

2 available, US Flag, built 1979 to ABS specficiations, in 2005 barges had an International Load Line Exemption Certificate.  234' x 53' x 23', raked ends, split hull, coaming on ends, 168' x 41' x 21' deep hopper, weight of material 5400 tons, authorized cargo is dredge spoil with specific gravity not exceeding 1.90.  Steel thicknes:  side plate 3/4", bottom plate 7/16", keel 7/16" below baseline, hopper slope plate 3/4", hopper side plate ½", angle of slope 33 degrees.  Unmaned mean keel draft 19' corresonds to freeboard measured amidships of 3' 8-3/4".  Displacement 940.45 long tongs, VCG 11.33' above the baseline, LCG .43' aft of FR58.  (12) 18" diameter manholes.  Equipment:  deck house, Detroit 71 diesel engine, navigation lights, fire fighting equipment, life saving equipment, spare parts. Dry docked, repaired, sandblasted, painted and put in excellent condition. Located Virginia.  Price:  $2,000,000 each


UNIQUE 100 CUBIC YARD DUMP BARGE  (Ref#3693

Used in fresh water, 100' x 26' x 7', draft 2' empty, 7' full, 4 pockets on each side to carry dirt, sand, mud or rock, constructed with high nickel steel (lack of corrosion).  10 separate compartments for flotation accessible by manholes.  (2) pockets for spuds in center running vertically allowing spud poles. 
OPERATION - Releasing the cargo can be quickly released or dumped aside by hitting an arm with a hammer. The release arm allows the chain wound around a rod to unravel allowing the cargo to slide out the side of each pocket's door. The doors are hinged on the top, so the weight of the cargo pushes them out to the side, and then they return to their vertical position after dumping. To prepare them to hold more cargo you wind in the chain by inserting a bar into slots around the chain's rod which has a locking ratchet. Winding in the chain pulls on the door which is kept from releasing by the locking ratchet. 
Barge tilts at lower water levels from sitting on the riverbank.  Currently set up for carrying cargo that is dumped aside.  Each open pocket is 11.8 cu yards, spud tube pockets 11.2 cu yards.  Total scow capacity 93.2 cu yards.  Located New York State.  Price:  $110,000

click on drawing to enlarge


393' x 105'7" x 26'7" FLAT DECK BARGE (Ref#3225)

Built 2012. 393' x 105'7" x 26'7", light draft 3'4", Loaded draft 20'. GT 8,870, NT 2,661T. Deck load capacity: 20 ton/m2. Ballast tanks: 22pcs:20m3. Ballast pumps: (2) 400 m3/h pumps. Generator set: CAT C4.4. Winches: (2) Anchors / Mooring winches. Deck thickness: 20mm extra heavy deck. Towing brackets: (2) on PS and (2) on SB, in recess at fore deck covered with steel gratings. Canadian Flag.  Barge in class with ABS until JAN 2026.   Located Northeast Canada. Price: $7,000,000


343' x 94' x 25.5' CONTAINER BARGE (Ref#3542)

Built 1999. ABS A1, Loadline. GT 4649, NT 1394. 343' x 94' x 25.5', loaded draft: 12.6', light draft 3'. Charter Price: $5,250 per day


360' x 56' x 19' FLAT DECK BARGE (Ref#3338)

Built 1930. Converted from car ferry. Only ever operated in fresh water. GRT 2713, NRT 1287. Carried 30 rail cars. Generator, bow thruster, anchor and winches. Operates in Michigan. Price: $1,000,000  PRICE REDUCED TO $600,000

Approx cost to transport to the Atlantic Ocean from the Great Lakes is $300,000 – only used in fresh water, excellent condition.  Tanks are dry.  Ready for use.  Quick action is required due to the eminent closing of the St. Lawrence Seaway until Spring 2023.


335’ x 82’ x 60’ FLAT DECK BARGE  (Ref#3863)

Mfg. 2007, 1180 ton NT, 3933 ton GT, 2 mooring poles, 4 winches, 4 anchors, side ramp, no crane, Location: Europe Price: € 1,300,000


330’ x 80’ x 19’ FLAT TOP BARGE (Ref#3909)

Mfg 2007, Singapore. 8.065 Tdw -  draft 4-1/2 ft empty, 15ft loaded DNV class due since 4 -2022 Deckstrength from 10 /15 upto 22 ts m/2.The barge was previously equipped with a revolving crane and is ideal to reinstate as crane barge. Location: Europe Price: $950,000


300’ x 90’ x 22’ FLAT DECK BARGE  (Ref#4004) 

Built 1965, steel, partly welded/partly riveted, racked bow and transom stern, 21 compartments, fitted with arrangements for 4 spud poles, in order to hold rock deck needs to be reinforced where ringer crane was not mounted, 3000’ of deck area needs work, 1000 lb/sq ft deck capacity, located East Coast US  Price:  $850,000  PRICE REDUCED FOR QUICK SALE:  $600,000


300' x 90' x 20' FLAT DECK BARGE (Ref#2569)

Built 1996, DWT 9737, Light Ship 1850 tons, Deck area: 26,995 sq/ft, Deck unit load: 4600lbs  / sq ft. Bulkheads: 3 longitudinal, 4 transverse + pump room bulkhead. 20 ballast tanks. Raked on both ends, 2 skegs on stern. John Deere 79Kwh at 1800rpm, Mitsubishi 72Kwh at 1800rpm, (2) ballast pumps: Pumpeteknik 600m3/h, 1 Portable el. driven submersible pump. Anchor winch: Brattvaag/Hagglund hydraulic winch, 18 tons pull / 1000meter wire, 32mm with breaking load 704kN. Smit towing arrangement for main and emergency towing, SWL 100 tons. Located Norway. Price: €1,950,000 EUR


(3) 260' x 52' x 12' HOPPER BARGES (Ref#3615)

Package of 3. Built 1981, 260’ x 52.5’ x 12’, 1375 GT, Single rake. Double hull, single open hopper. Capacity at 10’: 3,521 ton, capacity at 9’6”: 3,311 ton. No ABS, Requires bottom work, requires approx. $150,000 each barge, 5 hours sailing time to drydock, currently in water, located Mid South East Coast USA. Price: $325,000 each


72' X 22' TUGBOAT AND 225' X 52' BARGE  (Ref#3737) 


Tug:  72' x 22' x 11.22', built 1990, built in Holland, 99 GT, 30 NT, accommodations (1) 1 crew, (1) 2 crew , (1) 6 crew, main engines: (2) Deutz SBA 12M 86, speed 5.5 knots, capacities:  fuel (2) 16.40 m3, potable water (2) 5.10 m3, ballast (1) 7 m3.
Container barge:  225' x 52' x 14.82', built 199, built in Argentina, max draft 10.86', min draft 5.9', capacities:  fel (2) 42.34 m3, potable water (2) 10.78 m3, ballast (2) 121.86 m3, Teux: 140, holds 4, cargo 1900 tons.
Located South America
Price:  $1,400,000


250' x 72' x 16' FLAT DECK BARGE (Ref#2974) Built 1994, ABS Class. Design deck load 2000lbs / sqft. Cargo capacity at load line 5312 ton. Raked on both ends. GT 1943, NT 582. Load line draft 12' 9". Located Louisiana. Price: $2,300,000


250’ x 54’ x 14’ FLAT DECK BARGE(Ref#3808)

Small rake one end, box other end. Was an oil drilling barge, extremely heavy built, 3000 ton capacity. Just drydocked at a cost of $400,000 (The crane will not go with the barge.)  Location Louisiana. Price: $1.1M


240' x 60' x 15' FLAT DECK BARGE (Ref#2697)

Built 1981, 240' x 60' x 15', light draft 2', draft loaded 11'10", DWT 4300. Certified Ocean Service by USCG / ABS +A1. Price: $1,850,000


230' x 64' x 14' FLAT DECK BARGE (Ref#3097)

Built 2008, class DNV-GL 100 A5. 230' x 64' x 14', draft minimum 1.9', draft max 11'. DWT: 3664 ton. Lightship weight: 578.5 ton. Deck strength: 10 ton/m2. Ballast system: 24 tanks. Located South America. Price: $1,100,000


230' x 40' x 11.5' FLAT DECK BARGE (Ref#3547a)

Built 1954. 230' x 40' x 11.5'. GRT 1886, NRT 565. Located Virginia. Price: $475,000


230' x 40' x 11.5' FLAT DECK BARGE (Ref#3547b)

Built 1954. 230' x 40' x 11.5'. GRT 1897, NRT 569. Located New Jersey. Price: $475,000


220’ x 60’ x 14’ DECK BARGE  (Ref#3913d

Built 1998, 11’ max daft, light ship weight 645 LT, cargo capacity at max load line 3251 LT, 2500 lb/sq ft deck load, 5 transverse bulkhead, 3 longitudinal bulkhead, 24 compartments, 1366 GRT, 409 NRT  Price:  $1,050,000


(2) NEW 20 MAN ACCOMODATION UNITS (ON SHORE/OFFSHORE)  (Ref#1502)


New in 2008 and never used, 5 berths in each upper and lower section, each with all new still wrapped bunk beds, shower and bathroom unit and dressing room and cupboard space, etc.,   Fully wired for Telecoms, Fire system, AC system and water systems.  Dimensions/weight:  17.6m x 5.45m x 7.75m (57.7' x 17.8' x 25.4'), weight 70 tons. 
High spec units that are air purged units for oil and gas installations such as offshore drilling, land rigs, and production platforms for hazardous conditions.
New cost in 2008 was 3.5 Million USD, Never Used,
European built.  Located Europe. 
Bargain price:  $500,000 USD for both


200' X 40' X 10'  (Ref#1753

3 available, 1400 ton capacity, no ABS certificate, raked both ends, located Northeast USA  Charter:  $10,000 per month


196' x 48' x 15' FLAT DECK BARGE (Ref#2734)

Built 1940s to 1950s, Converted from LCT barge. Raked both ends. Wing Tanks, double bottom. Located West Coast. Price: $250,000


195’ x 60’ x 12’ ABS DECK BARGE  (Ref#3913b

Built 2008, 9.5’ max draft, light ship weight 521.5 LT, 2401 LT cargo capacity at max load line, 2400 lb/sw ft deck loading, 5 transverse bulkhead, 2 longitudinal bulkhead, 14 compartments, 1008 GRT, 302 NRT  Price:  $2,450,000


195' x 35' x 10.5' HOPPER BARGE (Ref#3283)

Built 1979. NT 729. Hopper capacity: 78,860 cu/ft. Fair condition. Located Tennessee. Price: $145,000


195' x 35' x 12' HOPPER BARGE  (Ref#3384

Built 1970's, good condition, located Illinois  Price:  $140,000


195' x 35' x 10.5' FLAT DECK BARGE (Ref#2509a)

Built 1963, converted 2015. Converted to a flat deck barge from a single-skin tank barge, square rake bow. GT 594, NT 594, 8 compartments. Steel. 2 available. Rake one end. 5/16" wall thickness. Drydocked 6-2011. New Zincs, new antifoul paint. Located Florida. Price: $375,000 for both


193’ x 60’ x 14’ DECK BARGE  (Ref#3913c

Built 1998, 11.4’ max draft, 5555 LT lilght ship weight, 2500 lb/sq ft deck load, 2900 LT max cargo capacity, 4 transverse bulkhead, 3 longitudinal bluckhead, 20 compartments, 1183 GRT, 354 NRT  Price:  $850,000


183' x 10-1/2'W x 15.58 FLOATING DOCK  (Ref#1538

Built 1997, 183' x 10-1/2'W x 15.58, 6200 ton lifting capacity, (2) 250 kw generators, located Korea  Price:  $1,150,000


196 x 46' x 13' PIPE LAY / BURY BARGE  (Ref#1564b) 

196 x 46' x 13', 13' hull depth, 5' draft, 120 ton Manitowoc 3900W 110' crane, accommodations for 50, (6) stockless 10,000# anchors, (2) spuds 50' long, (2) American 280 triple drum winches, (2) 150 kw generators, 185/125 air compressor, (4) 400 amp electric welding machines, 26,000 gal fuel capacity, 76,000 gal water capacity, pipe capacity 2" – 24" OD, (4) work stations, 40 Kip track type tensioner, 40' stinger, (2) 10" x 10" Patterson jet pumps, (2) 900/125 air compressors, sled type jet machine, surface, mixed gas, heliport, ROV/Portable, Class ABS, US Flag, Built in 1962. Converted and reworked in 2000.   Price:  $4,200,000


185’ x 45’ x 12’ FLAT DECK BARGE  (Ref#3953

2000 ton capacity, originally slotted barge for drilling rig, slot plated over, (2) longitudinal bulkhead, small rake, located Louisiana  Price:  $725,000


180' X 70' X 10' CRANE BARGE  (Ref#1842

No crane equipment – crane equipment has been removed. 4' draft, 3500 sq ft open deck, SSB and multichannel VHF.  4-point mooring system, (2) 50' spuds, (4) 8000# anchors, (1) 40kw and (1) 30 kw generators, (2) 371 Detroit generator engines, (2) 375 cfm air compressors, 1500 gal fuel capacity, (2) 500 gal water tanks. No ABS certification. Good for coastal work and inland. Has anchor handling equipment, winches, and other miscellaneous items on the barge. The barge is tight and dry and ready for use. This is not an ABS barge and was never an ABS barge. Can be inspected in the Houston area. Price:  $900,000


180’ X 60’ X 13’ SPUD BARGE  (Ref#3846

2.0’ forward draft, 2.2’ aft draft979 GT, flat main deck, raked bow, flat sides, flat bottom, raked stern, port and starboard skegs, 4 spud wells, subdivided (2) longitudinal watertight bulkheads and (6) 4 transverse watertight bulkheads forming 21 watertight compartments. When sold will have current ABS and US Flag  Price:  $2,300,000   Charter price:  $1800 per day


180’ x 54’ x 12.5’ DECK BARGE  (Ref#3911) 

Built 1977, 9’ load draft, 2.5’ light draft, height 12’, 1500 psf deck strength, 1047 net tonnage, 2000 short ton as built full load capacity, built ABS but no longer ABS – requires approx. $100,000 to certify as ABS  Price:  $750,000


180' x 54' x 12' PIPE LAY / BURY BARGE  (Ref#1564a

180' x 54' x 12', 12' hull depth, 5' draft, 150 ton Manitowoc 4000W 120' crane, accommodations for 44, (7) stockless 10,000# anchors, (1) American 280 triple drum winch, (2) Amcon 385 double drum winches, (2) 150 kw generators, 185/125 air compressor, (4) 400 amp electric welding machines, 47,000 gallons fuel capacity, 86,000 gallons water capacity, pipe capacity 2" – 24" OD, (4) work stations, 40 Kip track type tensioner, 50' stinger, (2) 10" x 10" Patterson jet pumps, (2) 900/125 air compressors, sled type jet machine, surface, mixed gas, heliport, ROV/Portable, Class ABS, US Flag  Price:  $5,250,000
Built 1981. Converted and reworked in 2000.


180' x 50' x 12' FLAT DECK BARGE (Ref#1584)

180' x 50' x 12', Built 2012 for oilfield use, ocean seaworthy, no ABS, deck strength 5000lbs/sq foot, 2200 ton capacity on deck, deck weight 700 ton, built from 3/8th and 3/4th inch steel, ramp, no bin walls. Located Florida   Price with ramp: $1,400,000  Price without ramp:  $1,350,000


FLAT DECK BARGE  WITH BIN WALLS (Ref#1760) 

Built 1979, COI and ABS Loadline. 180' x 50' x 12', 3' minimum draft. 905 GT, 905 NT. ITC GRT 949, ITC NRT 284. 4' high steel fence with (2) side openings. Usable deck: 160' x 46'. Cargo capacity: 1900 ton. Deck loading: 1700 psf. Deck type: Reinforced steel and fiber concrete. Powered ramp: 18' x 35', max loading 140,000 lbs. 10 watertight compartments, (1) 100 gal diesel fuel tank, (1) 50 gal hydraulic oil reservoir, raked bow and stern, flat bottom, Good condition.  Survey, gauging report, stability letter, displacement table, ABS Loadline renewal, and load line certificate available.  This vessel is en route to Seattle Washington from the South Pacific. It could be diverted to the Caribbean if a decision is made quickly. Will arrive in Seattle in May of 2019.  Charter Price: $2,000 per day


177 x 49 x 11.5 FLAT DECK BARGE  (Ref#995)  Manufactured 1998, steel construction, 177 x 49 x 11.5, 54m x 15m x 3.5m, 280 tons, located Middle East  Price:  $750,000


172.7' x 60' x 10' CRANE BARGE  (Ref#1554b

Built 2003, Class BKI, 172.7' x 60' x 10', 776 GT, 233 NT, P & H 150 ton crawler crane w/160' boom installed, 29.5' and 19.6' section standby, crane radius 39', fly jib 40' standby.  (1) Genset 20 kVA, Anchor winching:  design and construction 15 ton mooring winches:  (1) ship set of 4 points mooring winches consist of 2.  (2) units of double drum mooring winch c/w 1 diesel hydraulic power pack and local control station, 5 anchor 4.5 ton each.  135 hp diesel engine power pack with necessary controls and accessories.  Engine model Hyundai, Mitsubishi D6BR, (1) hydraulic double pump 101 liters/min, (1) hydraulic oil tank.  Safety equipment, 10 m3 capacity fuel oil tank, 25 m3 fresh water tank on deck, 200 m3 fresh water tank below deck, sewage tank.  Office (full A/C), dining room, storage contained, accommodations for 20 persons, clinic.  Communication and navigation equipment.  Solas approved.  Located Southeast Asia.  Price:  $1,500,000


175' x 75' x 12' PIPE LAY / BURY BARGE (Ref#3302)

Built 1991. Class ABS (expired). 175' x 75' x 12', freeboard 7'6". 100 ton capacity. Barge power 100KW diesel gen-set. Crane power 350KW diesel gen-set. Tail swing 35'. 60' - 175' operating radius. Rated load 17LT. Used when there is work. Located Louisiana. Price: $2,850,000


172.7' x 60' x 10' CRANE BARGE (PIPE LAYER)  (Ref#1554c)  

Built 2003, Class BKI, 172.7' x 60' x 10', 776 GT, 233 NT, Sumitomo 150 ton crawler crane w/160' boom installed, 29.5' and 19.6' section standby, crane radius 39', fly jib 40' standby.  (1) Genset 20 kVA, Anchor winching:  design and construction 15 ton mooring winches:  (1) ship set of 4 points mooring winches consist of 2.  (2) units of double drum mooring winch c/w 1 diesel hydraulic power pack and local control station, 5 anchor 4.5 ton each.  135 hp diesel engine power pack with necessary controls and accessories.  Engine model Hyundai, Mitsubishi D6BR, (1) hydraulic double pump 101 liters/min, (1) hydraulic oil tank.  Safety equipment, 10 m3 capacity fuel oil tank, 25 m3 fresh water tank on deck, 200 m3 fresh water tank below deck, sewage tank.  Office (full A/C), dining room, storage contained, accommodations for 20 persons, clinic.  Communication and navigation equipment.  Solas approved.  Equipment for installation pipeline up to 24".  Stinger 12 ML (39'), 12 sets of roller, welding station, 6 each Davit 10 ton capacity.  Located Southeast Asia.  Price:  $1,600,000


170' X 37.4' X 8.2' UNUSED FLAT DECK BARGE  (Ref#3687) 

Two available, built 2017 and 2018, located Europe, 52m (170.6') x 11.4m (37.4') x 2.5m (8.2') – draft max 1.93m (6.33'), deadweight 770 tons, GT 374, NT 112,  12 tanks but no ballast system, bottom structure has been additionally strengthened for loading and unloading aground, suitable for tidal areas, able to do roro work when falling dry, integrated spud pole construction, Class LR (deepsea, coastal waters, harbours and inland waters), load 10 ts/m2, located Europe 

Price:  €1.4 Million Euros
Ramps and spud poles available at extra cost


170' x 50' DECK BARGE  (Ref#680)  170' x 50', 6" heavy duty concrete deck, crane tracking beams, located Alaska  Price:  $420,000


170' x 30' x 7.6' SPUD BARGE (Ref#3145a)

Built 1961. 170.1' x 30.1' x 7.6'. GT 323, NT 323. Converted from tank barge. (2) Spuds. Raked both ends. Price: $190,000


165' x 43.5' x 12' FLAT DECK BARGE (Ref#2608)

Built 2006. Current ABS certificate. (10) available, (8) have bin walls. Bin wall height 4'. Bin area: 138' x 36', 737cu/yd. GT(ITC) 602, NT(ITC) 180. Light draft: 1.8', Recommended max loaded draft: 8.9'. Max capacity 1400 tons. Compartments: Rake compartments 2, main compartments 6. Lightship weight 303 LT. Located Northeast US. Price: $1,250,000


165' x 40' x 12' DECK BARGE  (Ref#1386) 

Built 2007, 48" bin walls, cargo bin 138' x 36' x 4', 602 G, 180 NT, skegs, light draft 1.8', max loaded draft 8.9', max capacity 1500 short tons, 2 rake compartments, 6 main compartment, light ship weight 303 long tons  Price:  $1,350,000 each


164.9' X 50' X 12.1' BARGE  (Ref#1754

731 GT, 731 NT, (2) Clyde 7 triple drum winches with central control room, (4) 10,000# anchors, West Coast USA  Price with gear:  $250,000  Price without winches/spuds:  $525,000


160' x 35' x 7.8' DECK BARGE (Ref#3145b)

Built 1961. 160' x 35' x 7.8', GT 365, NT 365. Converted from tank barge. Raked both ends. Price: $165,000


160' x 34' x 13' SPLIT HOPPER BARGE NEW  (Ref#895

New build, double hull, 160 x 34 x 13', (49m x 10.5m x 4m), 550m3, DWT 1058, GRT 415, LBP 49,400M, breadth moulded 10,500m, depth 4,100m, design draft 3.5m max, approx 10 knot speed, cargo tank capcty (100% full) 547.5m3, MDO tanks (with service tanks) 32.0m3, hyd oil tank 26.4m3, (2) main engines 2x275kw Cat or Cummins, (2) azimuting thrusters each with diameter of approx 1050mm, (2) aux generator sets approx 107 kva output each, 1 emergency generator set approx 47 kva, Capable of transporting sand, silt, clay, gravel and stone in the hopper compartment, capable to dump the spoil to the seabed by means of longitudinally splitting of the vessel,  Splitting of the vessel is operated by two hydraulic cylinders, one forward and one aft of the hopper, capable to open the vessel remotely controlled from the wheelhouse, hopper has a coaming and is open at the top, remote control of the propulsion installation from the wheelhouse  Price:  9,500,000 (Euros)


160' X 54' X 8' SPUD BARGE  (Ref#1791

New, steel deck, rake one end, box one end, (2) 70' spuds, 18 water tight compartments, Class ABS, can accommodate large crane or heavy load, located Mid South USA   Charter:  $600 per day (60 days or more)

CURRENTLY ON CHARTER - NOT AVAILABLE


160' x 26' x 10' DOUBLE RAKE FLAT DECK BARGE  (Ref#3755B) 

Approx 550 ton capacity, excellent condition inside, outside could use some paint  Price:  $200,000


155' x 24' QUARTERS BARGE  (Ref#1087

Manufactured 1978, 155' x 24' barge, quarters for 20 people, refurbished, ready to go  Price $675,000


150’ x 60’ x 9’ CRANE BARGE  (Ref#3937

Available for charter, located Kentucky  Charter Price:  $850 per day for 3 months, $750 per day for over 9 months


150’ X 54’ X 12’ CONCRETE PRODUCTION BARGE  (Ref#3958a) 

Built 1970’s, 5’ light draft, made with rebar, held water for ballast (not used for petroleum), 2 decks: top deck 126 x 54, top frame dimensions 58’ x 45’, 16’ air gap from first deck to top deck, top deck supported by concrete vertical columns (cold be removed yielding a flat deck barge), various tanks and hatches, good condition, box ends (which creates a slow tow), replacement value in excess of $2M, located Southeast Louisiana  Price:  $250,000


142' x 49' x 9.8' ACCOMMODATION WORK BARGE  (Ref#1554a

Built 1997, Class BKI, A100 (I) P (Accommodation Work Barge), 142' x 49' x 9.8', 820 GT, 246 NT, underdeck length 147', underdeck volume 1904.11, (2) 150 ton water tanks, fire pump, (6) 25 persons lift raft, (6) ring bouy, 24 rooms staff accommodation, 2 rooms crew accommodation, 11 office rooms, 1 meeting room, 1 tea room, 1 Mushalla room, 1 small sport room, 1 recreation room, 1 laundry room, 1 store rooms, 5 public toilet/bath rooms, 1 clinic, 1 technical room, located southeast Asia  Price:  $1,150,000


141' x 42' x 11' DECK BARGE WITH RO/RO RAMP (Ref#3556)

Built 1967. 141.4' x 42' x 11'. GT 141, NT 141. Clear deck space: 4940 sqft. Hydraulic engine: Perkins. Located West Coast USA. Price: $950,000


120’ x 50’ SPUD BARGE  (Ref#3831) 

3 spuds (1 walking spud, 2 fixed spuds), spuds approx. 36” rectangular x 50’ L, Manitowoc 390 friction winch powers 3 spuds, good operating condition, Florida  Price:  $225,000


140' x 50' x 10' ABS SPUD BARGE  (Ref#3077b

Built 2000, ABS A1, GRT 503, NRT 150. Max draft 7.9'. Light ship weight 280 LT. DWT 1261. Deck load 2000lbs/sqft. Transverse bulkheads 4, longitudinal bulkheads 2, compartments 15. Located East Coast USA. Price: $925,000


140' x 40' x 9' SPUD BARGE  (Ref#3252

Built 2015. 140' x 40' x 9', (3) 30" spud wells. Deck load capacity 2000lb / ft2. Located New England. Price:  $1,250,000


140' x 40' x 9' FLAT DECK SPUD BARGE (Ref#2819)

New, never used. GT 979, Capacity 2150 tons. Max uniform deck load 2,500lbs/sqft. Coaming: 3' high, 3' from sides, and 6' from stern, open on bow. Plate thickness: Deck 1/2", Bottom 3/8", Stern 3/8", Rake 1/2". (2) 30" spud wells. Rake one end, box one end. Located Northeast USA. Price: $1,300,000

 


140' x 40' x 9' FLAT DECK SPUD BARGE  (Ref#2474

New, Never Used.  140' x 40' x 9', (2) spud wells, built to ABS specifications, located Northeast USA  Charter Price:  $14,000 per month


140’ x 39’ x 9’ SPUD BARGE  (Ref#3883) 

Manufactured 1981, Modified 2010, Kubota V3600T engine, 80 hp hydraulic, 967 shot tons capacity, steel flat deck with double rake, 40’ towers with 2-part line rigging, 48” x 22’ spuds, 38’ working depth, (2) Gearmatics deck winches 6000 lb each, Solar powered battery system, located Louisiana  Price:  $500,000


140' x 35' x 10' DECK BARGE  (Ref#1580

140' x 35' x 10', ex ocean oil barge, rake stern and bow  Price:  $175,000


138' x 40' x 12' SPUD BARGE  (Ref#3522

Previously a dredge, rake and notch on bow, (2) 24" spud wells, (2) 60' x 24" spuds, 30 x 30 deck house, heavy built (generally 1/2" steel), six water tight comparts, located California  Price:  $260,000


137' X 32' X 5.6' BARGE  (Ref#1827c

600 ton capacity, located Colombia  Available for Charter:  $32,000 per month


135' x 40' x 12' SPUD BARGE  (Ref#3057)  

Built 1945, (2) splud 36" x 60', located California  Price:  $300,000


135 x 35 x 8  SPUD BARGE (Ref#910A)

 

Dimensions: 135' x 35' x 8'
Year Built: 1957 (Nashville Bridge)
Year 2011: New 3/8" Bottom, Formed Knuckles, & 3' Sides
Buck Frames: Added at 4 1/2' Intervals Throughout
Rake Bow/Box Stern (Added 2011)
Compartments: 4 Mid-Body, 1 Bow & 1 Stern
Spud Wells: Qty. 3 - 24" x 24" & Qty. 1 - 24" Dia.
Spuds: Qty. 2 - 20" x 20" (40' & 50' Lengths)
(Equipment on Barge Not Included)
PRICE:  $300,000 CURRENTLY ON CHARTER


130' x 53' x 12' SPUD BARGE (Ref#3490)

Built 1970s. Converted from tank barge. Bow raked. (2) 60' x 24" spuds with internal spud wells. Located Missouri. No crane. Price: $475,000


110’ X 33’ X 10’ FLAT DECK BARGE WITH BIN WALLS  (Ref#3905

Heavy duty steel and concrete wear deck, mats on the stern to walk a machine on and off, sitting for two years in fresh water, located Florida  Price:  $65,000


34 PERSONS ACCOMMODATION BARGE  (Ref#2977)

Renovated 2012, 200 GRT. 110' x 30', 6' min. draft. Sleeps 34 people. 700 gal fuel capacity. 5,500 gal potable water capacity. Galley, (3) refrigerators, (2) freezers, (1) Ice Maker. Full service commercial kitchen. Staterooms: 12, Bathrooms: 3, Showers: 5. media entertainment room. Price: $300,000


120’ x 60’ x 10’ CRANE BARGE  (Ref#3987

Drydocked 2021, located New Jersey  Price:  $1,000,000


120' X 52' X 8' UNUSED SPUD BARGE  (Ref#3664)   

Deck capacity 750 #/sq ft, (4) 24" x 24" spud wells, (2) 20" x 20" 70' spuds, hydraulically operated cable winch spud system with Cummins 6 cylinder diesel engine, coated inside and out, pollution rails, heavy built construction, near completion in Alabama  Price on Request


120' x 40' x 5'5" FLAT DECK BARGE  (Ref#1456)

120' x 40' x 5'5" H, 1' draft, Built 1970, 557 NRT, double rake style with bare steel deck, 1975 1000# HIAB Folo 245 Hyd Knuckle Boom Crane, good condition, located Alaska  Price:  $130,000


120 x 30 x 7 FLAT DECK BARGE  (Ref#3309) 

Built 1968, used in fresh water only, raked, 4 available,  located Mid South US  Price:  $170,000 each


120’ x 30’ x 6’ DOUBLE RAKE BARGE  (Ref#3781

New bottom 2005, located shipyard in Alabama  Price:  $300,000


120' x 30' x 7'6" FLAT DECK SPUD BARGE  (Ref#3045)

Rake on both ends, (2) spuds, 24" x 55' with diesel engine and hydraulic motor to handle the spuds.  Photos taken Feb 22, 2018, good clean condition, to be sandblasted and painted. Located Louisiana. Price:  $290,000


120' x 30' x 7' FLAT DECK BARGE (Ref#2715)

(3) available. Built 2006. Rake both ends. Located Louisiana. Price: $270,000 each


120' x 30' x 7' FLAT DECK SPUD BARGE  (Ref#2760) 

(2) available, one barge has 1 spud well, the other has 2. Drydocked 2015, bottoms were replated with ¼" steel and 3' up the sides replated. New knuckles. Sand blasted and epoxy painted. Rake one end. Located Ohio. Priced: $155,000 with 1 spud, $170,000 with 2 spuds.


120' X 40' X 7' SPUD BARGE  & LS-318 CRANE  (Ref#3761b) 

120’ X 40’ X 7’ Spud Barge, raked bow/square stern, 1-Center & 1 Port Heavy Square Spuds, Triple Drum Diesel Driven Waterfall Winch. Spuds: 2 ea. 24”x24”x40-ft. LS318 Link Belt Crawler Crane , mfg. 1980, Triple Drum, 80 Ton w/ A Counterweight, 17’ Tracks, 110' Boom, $100,000 work of internal steel work required (lower portion of the transverse truss framing needs replacing), located Louisiana. Price: $150,000


118' X 47' X 7.9' FLAT DECK BARGE  (Ref#1827A

deck barge

850 ton, located Columbia  Available for Charter:  $29,000 per month


114 x 65 x 11 JACK UP BARGE  (REF#979)

 

Manufactured 1974 in Japan, GT 405 tons, Dimensions: 114 x 65 x 11, 35 x 20 x 3.4m (center open 12.9 x 6.6 x 3.4m), M/E Isuzu 150ps x 2 sets 125Kva, A/E Isuzu 1800rpm x 1 set 220V x 15Kva, type Kawasaki IHC-Gusto type, Capacity: Jacking- 1240T, Holding 2100T, spud length 43.5m, winch:  8 tons x 6m/min x 4 sets, anchor: 3.5 tons x 4 sets, last DD: May 2010 / repainted at same time, hydraulic part (line / pump unit / packing / piping) was repaired in 2010, generator engine was overhauled in 2010, some part of hull plate was replaced in 2010, Located in Korea PRICE:  $3,200,000


110' x 30' x 7' FLAT DECK BARGE (Ref#3343)

Built 1980. Double rake. 18 compartments. Built extra heavy duty to take a large crane. Being sold due to it being too big for the work this company was using it for. Good condition. Located Louisiana. Price: $145,000


110' x 30' x 7' FLAT DECK BARGE (Ref#3175)  

Built 1997, several available.  110' x 30' x 7'. GRT 1904. Cargo capacity at loadline: 226 ton. 4' bin walls. Located Louisiana. Price: $195,000


 


110' x 34' x 11'6" DECK BARGE  (Ref#735) 

Built 1952, located Virginia  Price:  $210,000 or $3,700 month rent  - ON CHARTER AS OF 8-18


100' X 28' X 7' SPUD BARGE  (Ref#3761a)

Double Rake Spud Barge,Diesel Driven Double Drum Winch,Barge was drydocked, blasted and painted very recently, located Louisiana.  ​Price: $185,000


110' X 32' X 6' SPUD BARGE WITH CRANE  (Ref#3761d)

, 24" X 40' Spuds,Diesel Driven Triple Drum Winch. 1984 American 5299A  60 Ton Crane with 160' Angle Boom, located Louisiana  Price: $305,000


100’ x 35’ x 8’  (Ref#2867)  Drydocked 2019, blasted and painted, knuckles redone, ½” plate, up 4’ on sides, (2) 30” interior spud well 1 on each end, double rake, located Mississippi  Price:  $135,000


100' X 34' X 6' SPUD BARGE AND CRANE (Ref#3761c) 

Double Rake Spud Barge, 2 ea. 40' Spuds, Drydocked and painted in 2018.  LS128 LinkBelt 60 Ton Crane with 110' angle boom. Refurbished 2016.  Located Louisiana Price: $235,000


107' x 24' x 5'5" BARGE WITH OFFICES (Ref#2856)

107' x 24' x 5'5" BARGE WITH OFFICES (Ref#2856) (2) Offices: (1) seasonal ticket office, (1) main office. 220v electric. Main office plumbed for heat with natural gas furnace, central a/c, plumbed for toilet. Blasted and painted 1981. (2) spuds at each end of barge. Located northern Mississippi River. Price: $65,000


105’ x 28’ x 8’ COMBINATION TANK/DECK BARGE  (Ref#3836a) 

300 ton capacity, 75,000 gallon capacity (4 cargo tanks), double hull, load line exempt, concrete wear deck, located West Coat  Price:  $265,000


105’ x 28’ x 8’ COMBINATION TANK/DECK BARGE  (Ref#3836a

300 ton capacity, 75,000 gallon capacity (4 cargo tanks), double hull, load line exempt, concrete wear deck, located West Coat  Price:  $325,000


101' x 96' x 18' HEAVY DUTY CRANE BARGE  (Ref#1357) 

heavy duty crane barge

101' x 96' x 18', 139' diagonal length, 4 main body tank, 2 wing tanks, (2) wing tanks 101' x 11'W each, (2) fwd tanks 37'W x 30'6"L each, (2) center tanks 37'W x 40'L each, (2) aft tanks 37'W x 30'6"L each, (2) spuds 74'6"L x 48" diameter with winches, lightship displacement 962.4 LT, deadweight capacity 3600 STONS, deck strength 3000 lb/sq ft, drydocked and painted in Feb 2008, machinery house with generator, hydraulic motor and air compressor, scantling plans approved for ABS loadline with minor structural modifications in 2003 Price:  $375,000


100' X 82' X 9' (13.5') RAMP BARGE  (Ref#3028)  

Bridge (ramp) dimensions:  57'L x 26'W  driving width, capacity cassette trailer 85 ton cargo load, max load 112 ton (trailer+tugmaster+cargo), pontoon has 10 ballast tanks, electric ballast pump in small engine room inside pontoon, bridge is lowered/raised by 2 hyd cylinders, hydraulic power pack, power supply via shore power connection 380V 50 hz, 2 electric mooring winches, navigation lights, 3 light masts, weights:  803 metric ton barge, 57 ton bridge, 860 ton total, it is arranged that the vessel has to moor PS along side, the bridge can easily arrange 2 way traffic    Price:  $825,000


2.    SPUD BARGE 100' x 52' x 7'  (Ref#910B)

    

  

Dimensions: 100' x 52' x 7'
Year Built: 2011
Rake Bow/Box Stern
Spud Wells: Qty. 4 - 26" x 26"
Spuds: Qty. 2 - 60' x 22" Dia.
3/8" Plating: Deck, Sides & Bottom
Compartments: 8 Mid-Body, 2 Bow & 2 Stern
Knuckles: 5/8" Formed
Buck Frames: 10" Channels - 5' Centers
Under Deck Framing: 6" I-Beams - 12" Centers
Bottom & Side Framing: 6" Channels
Exterior Coating: Coal Tar Epoxy (Except Deck)
(Crane & Other Equipment on Barge Not Included)
PRICE:  $575,000 CURRENTLY ON CHARTER

Located Kentucky


100’ x 30’ x 7’ SPUD BARGE WITH OFFICE  (Ref#3801

Built 2000, 20’ x 60’ office (steel) with 2 beths, was a restaurant, (2) 15” x 40’ spuds, 10’ deck on side lower than barge for entering, in fresh water in Louisiana  Price:  $225,000


95’ x 40’ FLAT DECK SPUD BARGE  (Ref#3984a

2 spuds cable operated by Detroit engine and hydraulic system, small hole (never needed to be pumped), rake one end, just out of service, ready for immediate use, located Louisiana  Price:  $75,000


85’ x 34’ FLAT DECK SPUD BARGE  (Ref#3984b

Self propelled with pilot house, 2 spuds hydraulically operated, can be operated from pilothouse, (2) Detroit 8V71 diesel engines, 514 gear boxes, rake, just out of service, located Louisiana  Price:  $120,000


86’ x 28’ x 6’ SPUD BARGE  (Ref#4016

Raked one end, 2 spuds powered by Detroit diesel in house, approx. capacity 200 ton, 46 GT.  Reworked in shipyard for COI, sides and bottom in good condition.  Barge was no longer needed so they never applied for COI.  Located Louisiana  Price:  $205,000


95’ x 24’ SPLIT HOPPER SELF-PROPELLED BARGE  (Ref#3929

Built 2006 (Spain), 270 MTNS DWT on 9.8’ draft, 190 GT, 261 cubic yard, 59’ x 18’ hold capacity, split hopper opening 8.2’ (free fall hopper system), (2) Cummins diesel engines (180 hp each), (2) hydraulic pack Sauer Danfoss ERRL-147 (1 for splitter and 1 for bow thruster and other services), bow thruster, accommodation 4 berths and galley, classed Spanish authority for 200 miles from coast, located Canary Island  Price:  €800,000 Euros


90’ x 30’ x 7’ SPUD BARGE  (Ref#3817) 

Built 2020, steel hull, 158 GRT, 158 NRT, excellent condition, located New York  Price:  $475,000


90' x 28' x 5.6' SPUD BARGE (Ref#2838)

Built 1980. GT 206. 90' x 28' x 5.6'. Link Belt HSP25 18-ton hydraulic crane. Triplex PE5 pump with 3,750 PSI. Crew quarters for six men. Located Louisiana. Price: $265,000


LIFTBOAT JACK UP VESSEL  (Ref#1127)

Manufactured 1983, 79'L x 59'W x 8'H, open space 2800 sq ft, 192 GT, 150 NT, main deck carco 105 (kips).  (4) 148' x 42" legs (5/8" wall thickness braced), 22'L x 12'W x 24" depth pads (raked all sides), 70 ton crane with 80' boom, 10 ton aux crane with 50' boom.  Main engines: (2) 12V71N GM (680SHP), 3:1:1 reduction gear (twin disc ratio), 8 knots.  (2) Deep Well Pumps, (2) electric 400a welding machines, satelilite phone with internet, (2) 80kw Delco generators w/(2) 6V71N GM engines, 7500 gal fuel, 9800 gal potable water, navigation equipment, 28 berths (including boat crew), central A/C and heaters, Lounge w/Satellite TV, 4 heads, galley seats 16, laundry.  Maximum working depth 90' (w/25' air gap), Max sea conditions: 4' hard, 5' soft bottom, 8-10 fpm speed.  Working in USA  Price:  $5,700,000


60.5’ x 40.5’ x 12’ CONCRETE PRODUCTION BARGE  (Ref#3958b

Storage capacity of 4000 bbls, built of all concrete construction, sides are approx. 6” thick, one single bitt is located on each corner, located Southeast Louisiana  Price:  $125,000


900 HP SELF-PROPELLED SPUD BARGE / PUSH BOAT (Ref#3186)

Built 2007. 69' x 25' x 6', clear deck 27' x 19'. Eye height: 23'. GT 72, NT 58. Main engines: (2) Cat 3406, speed: 12.5 knots. Generators: (2) 40KW. Air compressors: (2) 150 PSI 32 CFM. Hydraulic spuds: 12" x 12" x 40'. Hydraulic crane: 11 tons with 63' telescopic boom. Fuel capacity 5000 gal, water capacity 5000 gal. Electronics, communications, navigation. Located Louisiana. Price: $1,050,000


56' x 8'6" SELF-PROPELLED BARGE WITH TRACTOR AND TRAILER (Ref#3565)

56'x 8'6" freshwater self-propelled barge, less than 200 hours. Has been used to haul 36,000lbs. UltraJet 375 jet drives with CAT diesel engines. Includes 1986 Freightliner tractor and 95 Trail Eze 40,000lb trailer, sliding axle. Located Rocky Mountains, USA. Price: $290,000


50’ X 14’ X 6’ HOPPER BARGES  (Ref#3803) 

2 available, steel hull, built 2010, dry dock since 2017, 40,000 lb each, 50 cubic yards, located Northeast USA  Price:  $65,000 each


40' x 38' x 3.9' JACKUP BARGE (Ref#3613)

Built 2009. Made up of (4) Ravestein 40' x 8' x 4' sections. Legs (4) 59' x 20". Deck load capacity: 5tons/sq.meter. Jacking system: Dual hydraulic cylinders. Perkins hydraulic power pack. Modular construction for transportation. Mobilization for trucking: (2) 45' flatbed trailers, (1) 60' trombone trailer, 50 ton crane. Located Panama. Price: $425,000


18 METER / 59' JACK UP BARGE  (Ref#1519

Built 1999, rebuilt 2008, 15 Ton capacity, Modular form can be transported in two truckloads.  Located Europe  Price: 280,000 EUR


40' x 9.9' SELF PROPELLED WORK BARGE (Ref#3570)

Built 1998, Reworked 2017 into tri-pontoon work barge. 40' x 9.9' x 15", with 30' front deck. All structures removed and replaced with 1/4 c channel 3/8 diamond plate deck. Twin 25 gallon removable fuel tanks,  Twin 4-stoke 150 Honda's with 1200, and 1400 hrs.  Has pad eyes for picking. Outer pontoons have pipes welded along bottoms for beaching and strength. Includes 2017' 40' gooseneck trailer, custom made, raised neck 1ft , low boy triple axle. Located Great Lakes. Price: $100,000

 


JACK UP BARGE (Road Transportable) (Ref#683)  Year of Build 2007 / 2008. Length:  12.2 Meters (40') , Beam:  10 Meters (32.8'), Depth:  1.2 Meters (3.9') , Max Load Capacity:  22 Tons, Deck Load:  4 Tons / M2, Jacking System: 8x Hydraulic Rams, Hull Construction: Steel Pontoons, Leg Length:  12m – 18m, Moonpool: 1 x 300mm, Unit is comprised of 4 pontoons, which when combined offer a barge of 10m x 12m.  Each of the individual pontoons are equipped with container style corners which allow them to be stacked for transport with twist locks.  Price:  €575,000 EURO


SELF-PROPELLED AMPHIBIOUS BARGE  (Ref#934e)

Undercarriage weight 125,000#, 3 section deck, 50,000# / square foot capacity, cargo weight 100,000#, pontoon 6'H x 10' x 30' (eight bulkhead compartments), 4 strains of heavy duty 5" track chain per pontoon, high torque and final drives, powered by CAT C-15 ATAAC diesel engine, crane A2 15 ton, retractable boom.

PRICE:  $800,000


36’ X 10’ SELF-PROPELLED MATERIALS BARGE  (Ref#3873

225 hp Mercury engine, steering wheel, bilge pump, includes 3 axle trailer with 2-6/15 ball hook, 2 spare tires, good condition, ready for use, located Western Louisiana  Price:  $14,500


SECTIONAL BARGES FOR CHARTER  (Ref#3942) – located Kentucky


40’ x 10’ x 7’ (34)  Price for minimum 6-month charter $110 per day
20’ x 10’ x 7’ (16)  Price for minimum 6-month charter $90 per day
10’ x 10’ rake (16) Price for minimum 6-month charter $55 per day
S70 Spudwell 24” round (4) Price for minimum 6-month charter $30 per day
Spud 24” round 40’ (2) Price for minimum 6-month charter $25 per day
Hydraulic spud winch (2) Price for minimum 6-month charter $50 per day
Brackets Price for minimum 6-month charter $15 per day
Deck cleats (6) Price for minimum 6-month charter $5 per day


77’ x 21.5’ X 5' SECTIONAL BARGE WITH RAMP  (Ref#4001) 

(16) sections 21’4” x 5’ wide, bolts together from top, hard coat painted with heavy duty US Army paint (good for 25 years), clean condition, ready for use, located Louisiana  Price:  $120,000


80' x 50' FLEXIFLOAT SECTIONAL BARGE PACKAGE (Ref#3578)

Consists of (8) QuadraFloats 40' x 10' x 7' and (4) DuoFloats 20' x 10' x 7' varying in ages from 2 years old to 15 years old. Surveyed 2018, all pressure tested. Zincs. (2) 24" FlexiFloat spud pockets, (2) 70' x 24" FlexiFloat spuds, raising mechanism, power not available. Good condition. Located Northeast US. Price for barges only: $465,000, Package Price: $525,000


(2) 48’ x 12’ x 4’ SECTIONAL BARGES  (Ref#3935a

Built 2018, connect with rod/pins, 8” spud wells, currently on land, replacement cost $180k, can be stacked and trucked  Price for both: $110,000


Also available at extra cost: 
CAT 320E LONG REACH EXCAVATOR  (Ref#3935b) 

Built 2012, 7250 hours  Price for excavator:  $135,000


Price for (2) Barges and Excavator:  $230,000


40’ x 10’8” TRUCKABLE BARGE  (Ref#3993)

(two paired up in photo)

4’8” deep, weight 23,500 lbs, outside shell with two internal bulkhead, ¼” plate pins together with 2” solid pins, four pad eyes on each barge with two pinning spots, frame work consists of 6” channel on deck with 5” channel on bottom and 2” x 3” x ¼” diagonals.  Bottom longs and deck longs are 2” x 3” x ¼” angle.  Stern 2” x 3” x ¼” angle with 5” channel supports uprights.  Two hatch covers on deck with a hatch door through the rake bulkhead.  Epoxy one coat on inside and two coats on outside, six anoids on each barge, four d rings for lifting purposes while empty.  Price:  $70,000 each


FLEXIFLOAT SECTIONAL BARGES  (Ref#3765)


15' x 7.5' x 3.8' duofloat, (3 available) - $14,900 each
30' x 7.5' x 3.8' quadfloat, (7 available) - $22,250 each
Rake engine 7.5' x 7.5' x 3.8' (2 available) - $11,100 each
Loading ramp 15' x 7.5' x 3.8' (2 available) - $12,900
12" round spudwells (4 available)  $5,400 each

PACKAGE PRICE:  $200,000 (loaded on trucks)

Located Houston, Texas


YORK SECTIONAL BARGES (Ref#3327b)


(10) 35' x 10' x 6' York sectional barges. Connection fixtures. Located New England. Price To Be Determined


SHUGART SECTIONAL BARGE PACKAGE  (Ref#3950


(8) Pontoon sections 40’L X 13’11”w X 8’
(3) Pontoon sections 53’L x 13’11”W x 8’
(2) Rake sections 40’L x 13’8”W x 8’
100’s of pins in 2 baskets.
Package Price:  $225,000


FLEXIFLOAT SECTIONAL BARGES  (Ref#3895) 

40’ x 10’ x 3.5’, 20 available, 9 years old, located South US  Price:  $32,000 each


41' X 10' X 5' SECTIONAL BARGES  (ref#1737b

Shugart type, 27,000 lbs each (one per truck load), built 2010-2012, located Midwest  Price:  $36,000 each   Rental cost:  $1,500 per month


SECTIONAL BARGES AVAILABLE FOR CHARTER  (Ref#3888)
To be used in fresh water only


40’ x 10’ x 5’ Shugart style – Charter price:  $1,600 per month (loaded on truck in Midwest)
40’ x 10’ x 7’ Shugart style – Charter price:  $1,900 per month (loaded on truck in Midwest)


FLEXIFLOATSECTIONAL BARGES (Ref#3592a) - Forms a 32' x 40' barge



(2) Duofloats: 15' x 7'6" x 3'10".
(4) Quadrafloats: 30' x 7'6" x 3'10"
Bottom and side 3/8" plate, corners ½" plate, 18" access hatch, 3 floats have 6" pipe single bits
Located Alabama. Now out of water, looks good.
Price:  $75,000


FLEXIFLOAT SECTIONAL SPUD BARGES (Ref#3592b) 



70' x 50' x 5', draft 114", (7) Flexifloat S-50, square raked bow, square transom stern, bottom and sides 3/8" plate, transom ½" plate, 16" x 16" square spudwells on each corner, (2) 40' spuds, interlocking steel pins to form one barge, located Mississippi  Price:  $125,000


(3) 40' x 10' x 5' SHUGART STYLE SECTIONAL BARGES (Ref#987) New build. Price: $35,000 each


40' x 10' x 5' SECTIONAL BARGE  (Ref#1904) Shugart style, one year old, in water for one year, sandblasted, painted, excellent condition, located Illinois Price:  $33,500


(2) 40’ x 16’ x 4’ SECTIONAL BARGES  (Ref#3634b)  Like new  - used once  Price:  $100,000


(12) SHUGART SECTIONAL BARGES (Ref#3348) 

41' x 10' x 7', manufactured from 1997 to 2000. Good condition. Used only in fresh water. Located Tennessee. Price: $38,000 each


SECTIONAL BARGES (Ref#2632) (6) Available. 40' x 12' x 4-1/2'. (4) pin-together. 3 spud wells (spuds extra). Located Arkansas. Price: $180,000 for the package


(6) SHUGART STYLE 20' x 8' x 4' SECTIONAL BARGE PACKAGE (Ref#3594)

New, unused. 20' x 8' x 4', 8,000lbs each. Includes (2) 9" spud wells. Located Eastern Canada. PACKAGE PRICE: $120,000


30' X 10' X 3' SECTIONAL BARGES  (Ref#1737a

Shugart type, 14,000# each (3 per load), located Midwest USA  Cost:  $950 per month


MARSH BUGGY  (Ref#934f

5 x 5 x 28CR, hydraulic amphibious marsh undercarriage with Cat 320D standard reach 31', D Model   Price:  $285,000


MARSH BUGGY  (Ref#934)  5 x 5 x 30, built 2000, 8000 hours, Model 325 Make B, standard reach 34'  Price:  $250,000

VESSELS WANTED

 

Let us know if you have any vessels, barges, dredges or related equipment for sale.

Keep us in your files for any equipment that may become available in the future.