Last Updated: 04/28/2017 2:58 PM

Uralmash 3D-76
Sedlar 160
Service King  SK575, FKS375
XJ250, XJ450, XJ650, XJ1000, ZYT5500TZJ Workover Rigs
ZJ70, ZJ40, ZJ30C, ZJ20 carrier mounted rigs

 

 

URALMASH 3D-76 (Ref#15554)

New, never used. Manufactured in 1995. 26 components, total weight 450 gross tons.

Mast:

Allowed/ Max. Capacity in the Hook: 3200 KN, Height from the platform to the frame of cronblock: 53.5 M

Capacity: for pipe diameter 127 mm:  7000 M; for pipe diameter 140 mm:  5000 M

Number of Veranda/ Balcony for the Top worker: 2

Length: 10.56 M ;   Width:  10.56 M ;    Height: 57.500 M

Weight of the Mast: 42000 KG.

MAX. Capacity in the hook: 2250 (3000) KW

Nominal depth of drilling: 3600 (4700) M

Max. Depth of drilling: 4400 (5500) M

Lifting mechanism: Manual lifting mechanism

5/6 (6/7) Diameter of lifting wire: 32 mm Speed of Hook lifting during removing from the well or (accident liquidation):0.19 ( 0.16) M/Sec.

Speed of the elevator without weight: 1.58 (1.32) M/Sec.

Input Capacity of the inner Shaft of lifting mechanism:710 KW

Diameter of the holes in the Rotor's table: 560 0r 700 MM Input Capacity of the Rotor: 215 KW

Max load in the table of the Rotor: 4000 or 5000 KN

Moment of the Rotor's table: 50 KW.M

Number of drilling pumps: 2

Capacity of the drilling pumps: 600 ; 420 KW

Max output pressure of the pumps: 25 MPa

Frequency of the rotation,c-1:

Min:0.33 (20 rpm)

Max: 3.87 (232 rpm)

Air pressure in the pneumatic system:

0.6 MPa ( 6 KgS /sq.cm)

0.8 MPa (8 KgS/sq.cm)

Capacity of Diesel power station: 2x 100 KW

Flow rate of mud pumps: 51 Litre/ Sec.

Output pressure of the pumps: 25 MPa.

Total weight: Not more than 166.5 Ton.

Located Russia                      Price: $3,800,000

 

SEDLAR –NONE AVAILABLE AT THIS TIME

 

KSM 550 DOUBLE DRUM WORKOVER RIG  (Ref#8731R)  mounted on 5 axle carrier, tandem steer, tri-drive rear powered by Seres 6-0 with Allison 5860 transmission, 104’ x 240,000# hook load (8 lines) mast,

Doghouse: 3 compartment crew change office and tool room c/w 90 gallon accumulator, 90 kw genset and washroom

Skid with 500 gal hydromatic tank, with toolboxes and BOP test stump

KSM 350 triplex (4x6) mud pump with Series 60 Detroit engine (skid mounted in enclosed steel building)

Skid mounted rig tank 210 bbl 2-compartment with mud guns, hopper, degaser, and 300’ of 2” seamless line pipe  Price for rig only:  $775,000

Package Price:  $1,050,000

 

SERVICE KING SK575 WORKOVER RIG  (Ref#2506T)  Manufactured 2016, 42” x 12” main drum brakes forged steel, water spray brake cooling, air cooled double disc assist, 16” x 38-3/4” barrel, double 140 chain, 324 clutch, 6.6” shaft, 1” Lebus grooving.  42” x 8” sand drum brakes, water spray cooling, 16” x 43-3/4” barrel, double 140 chain, 224 clutch, 5.9” shaft, 14,400’ of 9/16 / 11,800’ of 5/8” capacity.  Mounted on 5 axle carrier, choice of derrick: 96’ x 250,000# (w/6 lines), 104’ x 250,000# (w/6 lines), 104’ x 315,000# (w/6 lines), 104’ x 330,000# (w/8 lines).  Well Service to 16,000’, workover to 10,000’, drilling to 7,000’ with 3-1/2” pipe  Price on Request

 

SERVICE KING FKS375  (Ref#1273N)  Similar to Cooper LTO350, manufactured 2007, double drum 38 x 10 with 225’ of 7/8” line, 30 x 8 with 6500 of 5/8” line, mounted on Freightliner 20,000# front, 46,000# rear, diesel engine, 4 leveling jacks, 40 ton swivel, 14 x 12 x 67’ single pole, hydraulically raised  Price:  $400,000  OFF MARKET

 

SERVICE KING SK 375 (REF#6121R)  Manufactured 2011, 475 hours, 3750 miles, 42 x 10 – 38 x 8 drawworks, “like new”, 96’ x 180,000# hydraulically raised mast, 4 axle carrier w/ 60 series Detroit engine, 4500 OFS Allison transmission, 500hp right angle box, 4 hydraulic leveling jacks.

Included:  24” 83AWTD McKissisck tubing block 1”, 9/16 6 x 7 sandline installed, guy wire, bale holder, aluminum steps, new Foster DD 58-93-2-R power tubing tong 1 5/16” to 7” OD`

Tools:

Pump mid 50 oil saver

Hose mid 50

Oil saver E/E E2 3/8 DD dual

Arm stabilizer, scoping cylinder

3/8 STD walking load binder/boomer

5/16” transport chain grade 70

5/16” alloy grade 70 grab chain hook

7008264 Catline swivel / Tong swivel

3/8 screw pin shackle (clevis)

Tail rope

Derrick belt

2 3/8” oil state swab mandrel

1 ¾” Guiberson tubular jars w/ ¾” pin

9/16” rope socket/swivel

E-91 O’Bannon 5/8” – 3/4” rod elevator

E-92 O’Bannon ¾” – 7/8” rod elevator

Swivel sub

1 ½ x 10 swab sinker bar

½ wire rope thimble

24 oak boards

PRICE:  $625,000

 

SERVICE KING SK375  (Ref#6218R)  Manufactured 2008, super single, 485 hp, 75’ x 180,000# single/double derrick, tubing board, rod basket, adjustable floor to 9’, disk assist braking, tooled  Price:  $425,000  OFF MARKET

 

WOLF 775 NEW WORKOVER RIG  (Ref#7267N)

Carrier 6-axle

- Single operator cab

- Front axles: 20,000#, suspension: spring

- Rear axles: 46,000# , tandem, walking beam suspension

- Third axle: 25,000#, air bag suspension

- Equipped with Floatation type tires

- Controls and Hydraulic System

- Hydraulic leveling jacks

- 2- Detroit 60 series diesel engines, 2- Allison 754 transmissions

- 1-Selective compound chain box

775 Drawworks:

- Single drum 750 h.p.

- Area for sandline drum to be utilized drill line spool

- Main drum brakes 42” x 12” forged steel, water circulated cooled

- Dual disc assist brakes

- Wichita high torque 224 twin disc.

- Lebus grooving 1-1/8”

- Right angle gear box 750 h.p.

- Rotary drive with clutch and brake

Model 112 x 350 Derrick:

- 112’ x 350,000#, 8-line string up

- Crown (4) 1-1/8”x 30” sheaves, (1) 1-1/8”x 36” fastline, (1) 5/8”x 24” for aux. line

- Dead line anchor 1-1/8” with weight indicator

PRICE:  $975,000 – New, Never Used, meets API requires, made in USA

 

 

ZJ70/4500 DSB CHINESE MADE 2000 HP DRILLING RIG  (Ref#14110Rb)  Brand New, 4500 kn max hook load, 2000 hp drawworks, 7000m of 5” drill pipe, plus many other components, located Far East  Price:  $10,500,000 USD

 

ZJ70LDB 2000HP DRILL RIG  (Ref#15720T)  Manufactured 2009, well-maintained by large international contractor, currently stacked in Asia.  (Cost $10,000,000 USD new).  This is a complete turnkey package including tubulars and is ready for shipment.  Full inventory and photos available on request.  All reasonable offers considered.

 

ZJ20 (XJ650) DRILLING RIG  (Ref#6409R)

Built 2007 (China) – Depth capacity 8,000’ with 3-1/2” drill pipe, drilled 10 wells

Self propelled truck mounted

Drawworks:  450kw (600 hp), drivemotor Cat C16 diesel engine, Allison S6610HR torquematic transmission, Drum 1-1/8” Lebuc grooved, auto driller, 114’ x 355,184lb Model JJ1580/35-k telescoping mast, stands 145 jts of 4-1/2” DP and 12 DC, racking board, casing and stabbing board.  ZT 160B telescoping substructure 5.1m high to top of rotary table, set back 2000 meters of 4-1/2” DP, travelling block YG-160B 355,198 lb working capacity, swivel SL160 354,060lb rating.  Mud tank 200m3 total valume, suctio tank, shaker tank, intermediate tank, reserve tank, (2) shale shakers 1000 gpm, vacuum degasser, desander, desilter, centrifugal, agitator, poorboy degasser, shear mixer, mixing pumps, water tanks, water pumps3-1/2” rotary hose, 4” standpipe.  Mud pumps:  (2) Rongli F800 550hp direct drive,  Jinan 550 hp diesel engines, Rongli K20 5000 psi pulsation dampener, 5000 psi Oteco relief valves.  (2) kellys 3-1/2” square x 40’, kelly spinner.  BOP: Shaffer Type annular, Cameron Type double gate 11” x 3000 psi, Accumulator 16 bottle, 280 gallon, 3000 working pressure with triplex pump, choke manifold, conrol panel, manual choke, upper and lower kelly cocks.  Generator (2) 375kw generator with (2) 430kw Volvo engines, controls, hydraulic power system, air compressor, 40 m3 fuel tank, weight indicator  Price:  $2,300,000 – located Former Republic Soviet Union

 

XJ650 WORKOVER RIG (Ref#15410N) New, Double drum, 24,600' service depth, 18,400' workover depth, 111 x 330,470# mast, CAT C18 700HP diesel engine, TC-680 transmission, 6 axle carrier 37mph, Right angle gear box, Price:   $1,700,000

 

XJ400 BACK-IN WELL SERVICE RIG  (Ref#3954Re)  Manufactured 2005, Double drum drawworks M42x12, S42x10, 104’ x 225,000# mast, 4100 hours, Detroit Sereies 60 engine, Euro Stage III, 665hp, 4100 hours  Price:  $320,000

 

750 HP WORKOVER RIG RIG MANUFACTURED (Ref#8942R)  Manufactured 2011, used 6 months, 750hp double drum drawworks, CAT C15 540hp each, rated 3000M w/ 5” DP, 6m rig floor, 27 ½” rotary table, 2 section telescopic mast, 38m x 2250 kn hook load, Rg swivel, Volvo Penta (2) 430kw, mud system, (2) x 800hp Bomco F-800 mud pump, 2x liner shakers, desander, desilter, mud system capacity 300m3, water tanks capacity 40m3, Located Middle East.  PRICE:  $6,300,000

 

350 HP WORKOVER DRILL RIG  (Ref#3038N)

New, Never Used - Made in China - Meets API Requirements

Located Houston, Texas USA

Service Depth:  13,100' (4000m) with 2-7/8" tubing

Workover Depth:  10,500 (3200m) with 2-7/8" drill pipe

Rated hook load:  134,885 lbs (600 kN)

Max. hook load:  202,000 lbs (900 kN)

Rated engine power:  350 HP

Drawworks power:  350 HP

Max. fastline pull:  40,465 lbs (180 kN)

Mast height:  105' (32m)

Racking board height:  57.5' / 66.3' / 69.5' (17.5m, 20.2m, 21.2m)

Traveling system:  3 x 4

Wire rope OD:  1" (26mm)

Carrier drive type:  10x8

Min. turning radius:  124' (34m)

Traveling dimensions:  62' x 10.5' x 14.1' (19m x 3.2m x 4.3m)

PRICE:   $950,000