03/22/2017

ROCK DRILLS / BLASTHOLE DRILLS / TRACK MOUNTED AND BUGGY MOUNTED DRILLS

 

FURUKAWA 12ED  (Ref#7300Tb

Manufactured 1996, 4200 hours on drill frame, 866 hours on new engine 6B61 Turbo, new cooler, new radiator, rebuilt rod changer and manifold, total rebuild on exhaust fan shaft and bearings, redone seats, wipers and new glass and much more  Price:  $78,500


FURUKAWA HCR 9ES  (Ref#7300Ta) 

Manufactured 2000, 2526 hours on drifter, 8472 hours on drill frame, oil changed every 200 hours, filters, etc. well maintained (records available), excellent condition, one owner  Price:  $72,500


FURUKAWA 1500 CLEARANCE SALE  (Ref#15577R)

Furukawa furukawa
7 units available
2008 Furukawa 1500, 3900 hours  $115,000 PRICE REDUCED: $100,000
2005 Furukawa 1500 (2 units), 4400 hours and 4600 hours  $95,000 each PRICE REDUCED: $80,000 each
2004 Furukawa 1500, 9000 hours  $75,000 PRICE REDUCED: $60,000
2003 Furukawa 1500 (2 units), 9000 hours and 10,000 hours  $70,000 PRICE REDUCED: $55,000 each
2002 Furukawa 1500  $50,000 PRICE REDUCED: $35,000


INGERSOLL RAND DML HIGH PRESSURE DRILL  (Ref#8958R) 

Manufactured 1993, underwent $250,000 in modifications and upgrades in 2007 (only 1,500 hours since),1050/350 IR HR 2.5 compressor (rebuilt 2007, only 1,500 hours), CAT 3412 (700HP) engine (only 1,500 since rebuild), spur gear head (complete rebuild), new pump drive, undercarriage excellent, 5 pod carousel, runs 4 ½” x 30’ pipe  Price:  $165,000  PRICE REDUCED:  $110,000


INGERSOLL RAND DM25SP (Ref#9817R)

Track drill with Cummins KT1150 engine, recently rebuilt, 750/300 air compressor, hot box, dust box, new 2 7/8” x 48’ kelly, good running condition  Price:  $85,000


ATLAS COPCO ROC-D3 (Ref#4891R)

Manufactured 2005, track mounted with 4 cyl Deutz diesel engine, compressor, no rod changer, currently drilling, one owner, wants to retire, set up for T38 rods  Price:  $140,000  PRICE REDUCED:  $95,000


INGERSOLL RAND ECM-450  (Ref#6482N) 

Manufactured 1988, track mounted, 3 cyl Detroit  Price:  $39,500


INGERSOLL RAND ECM 350  (Ref#4814Rm)  Year 1990, with water mist system and 671 hammer, unit has been sitting for several years so may need new hoses and other things addressed, but is a complete unit  Price:  $30,000


INGERSOLL RAND DM45E  (Ref#14599) 

Manufactured 1989, 1050/350 HR2 air compressor, Cummins KTA19 diesel engine on deck, mounted on Cat 235 tracks, operator’s cab, leveling jacks, 70,000# pullback, 5 rod carousel, 10 gpm water injection pump, hammer oiler, 5 drill pipe 4-1/2” x 25’ x 3-1/2 reg conn., table bushing to open to 12”, breakout wrench, operator’s manual, parts manual, dimensions/weight: 41’L x 10’6”W x 13’ H, T240 Super Jaws Bit 380 (shank for 10-3/4 OD x 10” ID casing, P80 hammer 4-1/2 API Reg. pin, T240 drive shoes, T240 diverter for 10-3/4 OD casing, underreaming system for simultaneously drilling and casing hole for 10” – 10-3/4” OD casing.  Canged all hydraulic hoses, replaced water injection pump motor, replaced all air hoses, replaced all rig lights, reconditioned cab including replacement of all laminated glass panes, replaced regulator valves, changed air regulator diaphragm, general service of engine and compressor, all hydraulics inspected and tested, cleaned and recently painted, fully operational and ready to drill, new winch and winch line, located Caribbean, excellent condition  Price:  $250,000 


ATLAS COPCO DM30 (Ref#6909RB)

Manufactured 2006, 4,700 hours (since rebuild) as of 4.01.2015, track mounted with Cummins QSX15 Tier III 525hp@1,8000RPM engine, IR 900/350 air compressor, 4 rod carousel for 4.5" x 30' (3.5"API Reg) drill pipe, 4.5"OD x 3.5"API Reg spindle sub, water injection (0-3GPM) with 200 gallon tank, dust collector, torque limit control, 7 gallon DHD Lube, Engine preheater, auto thread Lube-pneumatic,  excellent running condition  Price:  $450,000  PRICE REDUCED:   $385,000


INGERSOLL RAND DM30 (Ref#8986R)

Manufactured 1990, completely rebuilt,, 750/350 air compressor, overhauled 400 Cummins engine with low hours, new pumps, Cat installed new rails less than 12 months ago, painted, track mounted includes full rack of pipe.  Price: $170,000  PRICE REDUCED:  $145,000

 


GEOWELLTECH 3050R CRAWLER DRILL  (Ref#14089R) 

Manufactured 2009, (Geowelltech recently bought out by Atlas Copco), injection pump, crawler rubber tracks, 360 rotation, DTH hammer applications, winch, step up for symmetrix system, Detuz engine, Atlas Copco drilling components, hydraulic pipe rack.  Rig is designed for dtown the hole drilling applications.  It is mounted on a versatile crawler track platform with high ground clearance.  Good for work in restricted areas.  Ten degrees of chain feeder tilt, forward, backward and sideways.  Chain feeder has a stinger mounting that permits vertical movement of the feeder. 500’ of 2-3/8” pipe  Price:  $110,000


FURUKAWA HCR1500ED II (Ref#13461RA)

Manufactured 2012, 3100 hours  Price:  $320,000


FURUKAWA HCR1500ED II (Ref#13461RB)

Manufactured 2007, 5400 hours  Price on request


Furukawa HCR 1200ED (Ref#6623R) 2 available, both units last drilled in 2010 but are started regularly.

  1. Manufacted 2003, Cummins diesel engine, new in 2010, approx 9000 drill hours, approx 4200 drifter hours, dust collector, angle package with Digital Ilmag angle indicator, rod changer
  2. Manufactured 2004, Cummins diesel engine, new in 2008, 7400 drill hours, 3750 drifter hours, dust collector, angle package with Digital Ilmag angle indicator, rod changer

Price:  $135,000 each


FURUKAWA HCR900ES 20 (Ref#13461RC)

Manufactured 2007, 3500 hours  Price:  $180,000


TEI T46 ROCK DRILL  (Ref#5634R

TE550 drill head, RDSH1000 rotary head, limited access carriage 1000-1400mm width (39.37 – 55.12”), rotary head side movement 365mm (14.37”), hydraulic clamp/breaker 50-219mm FORCE 140 KN (30,864 lb), hydraulic power unit 63hp diesel 49 gpm @ 3129 psi, hydraulic chain feed with 47”, 66” or 86” of drill travel and 8818 lb of pull/push, hydraulic valve section for percussion drill, hydrauic winch, lifting capacit 600 kg (1322 lb), foam pump for 4 gpm @ 2175 psi  Price:  $155,000  PRICE REDUCED:  $125,000


GARDNER DENVER 3700 ROCK DRILL  (Ref#4814Rd

Rig operates but has weathered hoses, pistons needs repacking, rig can use some work  Price:  $12,000


GARDNER DENVER ATD3700 AIR TRACK DRILL  (Ref#4814Re

With Gardner Denver 750 compressor powered by Detroit diesel, PR55 hammer, running good when parked in 2014  Package Price:  $19,000


GARDNER DENVER CL (Ref#6645R)

Similar to GD 45, crawler mounted with Cat 3306 engine, 35’ mast, GD 1050 cfm compressor (adjustable psi) dust collector, opearotr’s cab with AC & heat, 3 joints of 30’ x 6 ¼” steel, ready to go  Price on request


REEDRILL SD250  (Ref#15659Ra

Manufactured 2001, 2.5” – 3.5” diameter, Isuzu engine, 250/150 on board air compressor  Price:  $55,000


REEDRILL SKF12 BLAST HOLE RIGS  (Ref#4953R

3 units available, manufactured 2007, Cat C27 engine, 50,000# pulldown, 42’ drill depth single pass or 182’ depth multi pass, 6 – 105/8” diameter, can toggle between low pressure and high pressure air (1050-1700 @ 125-100), 4 leveling jacks, single cylinder cable pulldown system for pulldown/pullback
Price per unit:  $185,000
Package price for all three units:  $525,000


REEDRILL SK62  (Ref#13808

Track mounted blast hole drill, 1200/150, 3412 Cat diesel engine, all hydraulic, heavy duty, bare rig  Price:  $225,000  PRICE REDUCED:  $175,000


REEDRILL SK35 (Ref#13404R)

Manufactured 1991, Cat 3408 deck engine, mounted on CCC with 335 Cummins (needs a little work) 850/350 air compressor, dust collector, 6 rod carousel, no water tank, 6 joints of 4 ½” x 25’ drill pipe, 3 hydraulic leveling jacks  Price $85,000


TEREX REEDRILL R20C (Ref#12575R)

Manufactured 2007, cab drill with HPR 4519 drifter, Cat 312 undercarriage, Isuzu diesel 6 cyl engine with Gardner Denver Tempest 12 250cfm on-board air compressor, 3700 engine hours, 1250 percussion hours, excellent condition  Price:  Canadian $250,000


GILL BEETLE  (Ref#2125N) 

Manufactured 1987, crawler mounted, hydraulic driven undercarriage, Detroit 353 diesel engine, 6 rod carousel.  825/300 VHP IR compressor with diesel engine mounted on Fast Track 2-axle trailer, good condition, (2) 6” hammers, 5” hammer, 300’ of 10’ aluminum pipe  Price:  $110,000    REDUCED TO $85,000


(2) TRANSQUIP AT 400 BUGGY PACKAGE (Ref #14184R) Two available. Both completely refurbished, powered by newly rebuilt 453 detroit diesel engine, 525A Spicer transmission T226 Rockwell transfer case, Ramsey 700 winch with 5/8’ cable, 75 rockwell front and rear ends, brand new 23.1x26 10 Good year tires, (2) all purpose utility / equipment beds for Transquip 400 Buggy.
Package price: $165,000


(6) BUGGY MOUNTED SHOT HOLE RIGS  (Ref#9671) 

Manufactured 1998 and used for 6 months.   (6) Rolligon RA-15 4 x 4 buggy rigs, Cummins diesel engine (120 hp), operator’s station, total weight: 24,000#.  (6) Duratec support trucks, staff motors, 3200# winch.  200 gal water tank, mud injection system, stem rack holder, Eagle pumps  Price:  $735,000


GEMCO BUGGY (Ref#11042NC)

Model 3T-300, top head drive, sandline, mainline, cathead, Detroit 353 engine, 4 ½ x 5 Gardner Denver mud pump, 100+’ of 2” x 10’ rods  Price:  $60,000  PRICE REDUCED:  $47,500


ARDCO DRILL AND WATER BUGGY COMBO (Ref#14075R)


(1) Ardco drilling rig with 4.5x5 Gardner Denver mud pump and new forestry tires
(1) Ardco water buggy with 2” Bowie pump, low profile water tank, rebuilt 353 Detroit, 542 transmission, clutch fuel tank, roll over cage, radiator and winch cable.
Both have been refurbished and only used 5 months in the field since refurb.
Package price: $110,000


ARDCO C-1000 (Ref#8416Ra)

2 available, mounted on 1994 International 4700 with diesel engine, 5x6 Gardner Denver mud pump with new brass & fluid end, auxiliary winch with weight to set loop, mud pan, loop spool, tilting rod rack, 3 hydraulic leveling jacks, 310’ of 2 3/8” x 10’ drill pipe  Price:  $95,000 


ARDCO 2510  (Ref#6228N

Manufactured 1983, mounted on crawler, 30,000# rig, on board duplex 85 gpm pump, 4 cyl turbo Cummins engine, rig has about 400 hours, Price:  $85,000
Available at extra cost:  1000’ of drill stem 


ARDCO BUGGY RIG (Ref#5613R)

Transquip topdrive, Cat engine, Leroi 256S2 air compressor, GD 4 ½ x 6 mud pump, 300’ of 10’ x 2 3/8” Mayhew Jr pipe, currently drilling, excellent condition  Price:  $320,000


DYNO-DRILL SEISMIC RIG  (Ref#679N

Manufactured 2005, self contained, 185/125 Ingersoll Rand air compressor (570 hours), John Deere Powertec 4.5L diesel engine on deck, air and hydraulic breakout, C50R-3B Yanmar rubber track carrier with Yanmar disel engine, crawler has 294 hours, (2) 10’ augers, 18’ of 2-3/8 drill rod, 28’ of 2-1/4” drill rod, various bits  Price:  $140,000  PRICE REDUCED:  $115,000