Last Updated: 03/15/2024 10:28 AM
 

Wichtex C-65, C-30, R4
Loadcraft 1000HP, 550
Drillmec MR800
Superior 1000M
Bethlehem S45E
Oilwell  860, 660
National Oilwell 1625, T32, 610M, 370, 110UE, 80B

WICHTEX C65  (Ref#12360N)  Double drum, double pole 8-5/8" x 7 x65', 6,000' of 2-7/8" line, mounted on 1974 International Model 2070A tandem axle truck with Detroit diesel engine, leveling jacks, 454 Chevy propane engine on deck with 250 gallon propane tank, automatic transmission for smooth operating, Foster 58 power tongs, Guiberso air clips, tooled for tubing and rods, will do 6000' of 7" tubing, currently working    Price:  $89,500

WICHTEX C65 DOUBLE POLE WORKOVER RIG  (Ref#4371T)  Double drum, mounted on 1980 Ford with 290 Cummins, DT 466 deck engine, 6 speed, double 7” x 5-1/2” poles, 7/8” drill line, tong rack, rear hydraulic jacks, air/friction clutch  Price:  $32,000

WICHTEX 60  (Ref#11275Tb)  350 Chevy propane deck engine, double cathead, telescopingmast, 1,000' sandline, mounted on 1994 Ford LT9500 truck with diesel engine  Price:  $112,500

WICHTEX   (Ref#4226R)  Manufactured 1968, 6 cyl Chevy deck engine, double drum drawworks, 36' hyd extension, mounted on 1968 GMC truck with 427 engine, 2 rear leveling jacks  Price:  $19,500

WICHTEX  (Ref#2517Rb)  Double drum, triple clutch, 50' w/hydraulic extension, 90 hp Perkins diesel on deck, mounted n 1975 Military 6x6 truck with Cummins diesel engine, all hydraulic  Price:  $35,000

WICHTEX SERVICE RIG  (Ref#13482T)  telescoping pole to 45', Cummins B5 9C engine (152 hp), new 910' wire non-rotation ¾" wire cable on Wichtex drawworks, 2000' like new-1/2" wire cable on sandline reel, mounted on 2012 Peterbilt 337 4 x 4 truck, PACCAR PX6 (260 hp) diesel engine, Eaton 6 speed transmission, 26,000 GVW, block brakes rebuilt 2017, crown sheaves and pulleys re-grooved 2017, travelling block has news shaft, kide plates and bearing.  28' non-telescoped pole, 45' telescoped pole, Martin Decker W58 weight indicator w/post cylinder, Braden hydraulic recovery winch, 4 hyd outrigger pad stabilizers  Price $125,000
Price for trailer mounted rig only:  $70,000

WICHTEX DRILLING RIG  (Ref#6017Ta)  Wilson 38 single drum drawworks, 7/8" line, 6 part line, weight indicator, mounted on 3 axle trailer, Cat 3306 engine, 40' x 240,000# mast, 4-1/2" square kelly, 17-1/2" rotary table, torque converter, 4 hydraulic and 8 screw jacks, breakout tongs, new 500 gal fuel tank, no pipe included  Pr ice:  $147,500
Available at extra cost:  OILWELL P214 14" DUPLEX MUD PUMP  (Ref#6017Tb)  skid mounted, Cat 3406, Matco fluid end, air clutches  

WICHTEX PUMP RIG  (Ref#4449T)  Manufactured 1981, mounted on 1995 Mack, no travelling blocks  Price:  $58,500

WICHTEX 3500  (Ref#15375T)  table drive, trailer mounted

12,000' HYDRAULIC TOP HEAD WORKOVER DRILLING RIG  (Ref#50R)
Built 2010 - New, Never Used - Located Europe
For full specifications contact us
Price:  $6,000,000

1000 HP LOADCRAFT TOP DRIVE RIG  (Ref#6296R)  Manufactured 2009, 1000 hp drawworks Model 4212, Faywick air clutch, 42" x 12" brake, 18" x 38" drum, powered by (2) Cat C15 (540 hp each) with Allison 6061RB transmission w/engine converter, 114' x 365,000# mast with 10 lines, equipped with torque arrest beam for the top drive and piping.  Tubing board, board fingers for 17,000 ft of 2-7/8" or 11,400 ft of 3-1/2" tubing, mounted on single axle heavy duty carrier for 140,000 lb load, ABCO 250 ton hook/block, 17'6" telescoping substructure with 14' clear under rotary beams, 365,000# capacity and 225,000# setback, fold out wings, floor area 18' wide x 18' long, w/carrier ramp to allow rig to rest on base of ramp, 22" rotary table w/44" centers, 4" x 5000 psi high pressure piping  Price:    $2,900,000

LOADCRAFT 1000M  (Ref#1122T)  Buit 2007, single drum with (2) Cat C15 engines, anchor with load sensor, 118'H x 425,000# mast, 2007 NOV ST-80C iron roughneck, pipe racks, hyd tel sub, rotary table, hyd skid system with John Deere engine, NOV TDS-10SA-11 250 ton top drive, American 250 Ton blocks  Price:  $1,100,000

LOADCRAFT HRI10000E DRILLING RIG – rated 13,000’ depth  (Ref#9965Ta)  Manufactured 2011, single drum drawworks, Wichita 3-25KKB disk brke, (2) GE761 traction motors, 118’ x 425,000# DSI derrick, racking boars, 3-1/2” ID rotary hose, DSI 17’H telescoping substructure w/425,000 rotary capacity and 300,000# set back, complete rig package  Price:  $1,275,000

LOADCRAFT 1000 HP MOBILE DRILLING RIG  (Ref#3830TPrice on Request

DRILLMEC HH102 650hp DRILLING RIG (Ref#11279Ta)  Built 2010, Cat 3412C DITA diesel engine, 52’ x 220,000# derrick, 4 sheave crown, 550 hp top drive, 20-1/2” rotary table, 16’H substructure with 24” clearance between mast to well center, (2) Drillmec 7TS600 7 x 8 triplex mud pumps 600 hp p/b Cat C18 diesel engine, mud system, diesel tank, water tank, 11” x 5000 psi Hydrill double BOP, Shaffer 5000 psi GK annular BOP, accumular closing unit, generators, hydraulic torque wrench, power tongs, instrumentation, hydraulic pipe handling, 6500’ of 4” S135 drill pipe  Price:  $4,375,000

DRILLMEC MODEL MR8000 DRILLING RIG – 1000 HP  (Ref#2939T)  Manufactured 2011, Semitrailer mounted, mechanical driven, 104’ x 440,000# derrick with 10 lines, 1000 hp Drillmec drawworks 1-1/8”, kelly rotary system, (2) Cat C15 engines power drawworks, (2) Drillmec 9-T1000 mud pumps p/b Cat 3512 engines, (3) Cat C15 engines for AC user of drilling equipment, mud tanks and system 13-5/8” x 5000 psi BOP equipment (annular and double ram), 2000m of 5” drill pipe and 2000m of 4” drill pipe, 100 man camp site  Price:  $6 Million

DRILLMEC HH220 1000hp DRILLING RIG  (Ref#11279Tb)  Built 2013, Cat C18 ACERT DIT-ATAAC diesel engine, 52’ x 400,000# derrick, 8 sheave corwn block, 1000 hp top drive, 27-1/2” rotary table, 25’ H substructure with 23’ clearance clear height under rotary beams, (2) Drillmec 9T-1000 9 x 8 mud pumps p/b Cat 3512 engines, mud system, diesel tank, water tank, 11” x 5000 psi Hydrill double BOP, 5000 psi Shaffer GK Annular BOP, accumulator closing unit, generators, power tongs, hydraulic torque wrench, instrumentation, hydraulic pipe handling, 14000’ of 4” S135 drill pipe  Price:  $7,500,000

BETHLEHEM S45 TYPE E DRILLING RIG  (Ref#8871Ta)  (2) Cat 3406 engines (375 hp each), drill line with Lebus grooved drum, 15” double Hydromatic brake, Foster make up and breakout catheads, new 350 Quincy air compressor on compound, 3” centrifugal pump compound drive, 450,000# DSI 45-S derrick, new 4-1/2’ stand pipe and valve, racking board, 10 line crown for 1-1/8 line, eight boxes and lines, raising lines, 8000# rotary hose.  DSI 12’ substructure, 43’L x 20’W, V door ramp, doghouse beams on sub, 18” Brewster rotary, National 4 sheave block and BJ hook, Coilwell C150 swivel, 5-1/4 x 41’ hex  kelly, 25’ top doghouse, 500 bbl skid mounted water tank, generator house, pipe racks, automatic driller, BOP and accumulator, tongs, 20” Oilwell pump w/Cat 379, 16” GD-FXO mud pump, (3) 650 bbl pits, 2500 gal fuel tank, elevator bails, elevators, weight indicator, 1500’ of 1-1/8” drill line  Price on Request

BDW 800 DRILLING RIG  (Ref#1553T)  13,000' working depth, 1000 hp with (2) Cat D379 diesel engines (1100 hp each), 136' x 650,000# COVCO mast, Yansi TG 225 250 ton block hook combination, Ideco 300 ton swivel, 16' box on box substructure, Ideco 23" rotary table, (2) HRSB Model RSF 1000 mud pumps each powered by Cat D379 diesel engine, (2) working mud pits 550 bbl total capacity, 250 bbl premix pit, 5 x 6 centrifugal pump w/75 hp electric motor mud mixing pump, (2) shale shakers, (2) 5 x 6 centrifugal mud moving pumps, 5' x 10' separator.  (2) 500 bbl water tanks, 12,000 gal fuel tank, Sullivan Palatek 50 DG air compressor, wireline unit, Horn choke manifold, rig managers quarters, crew house.  (2) Cat SR4 generators 455 kw each p/b (2) Cat C15 diesel engines.  BOP equipment, Koomey Type 5 station closing unit, 370 jts of 4-1/2" Grade G105 with 4-1/2" X hole tool joints. (24) 6-1/4" OD x 2-1/4" ID x 30' long nominal, (6) 8" collars. Miscellaneous equipment including centrifugal pumps, air hoist, tongs, slips, elevators, pipe racks, cat walk, handling subs, spare parts and hoses.  Price:  $1,325,000

BDW 800 1000 HP DRILLING RIG  (Ref#12459T)  15,000' depth range, BDW 800 (1000 hp) drawworks powered by GE-752 traction motor, (3) Cat 3508T diesel engines with 800 kw generators, 142' x 800,000# Superior cantilever mast, 25' box on box Superior substructure, (3) Gardner Denver PZ9 mud pumps each driven by GE 752 engine, 2 tank mud system (1000 bbl) with desander, desilter, gas buster, dual Brandt liner motion shakers and vacuum degasser, closed loop system with shakers, centrifuge, pumps and tanks.  350 Ton Brewster block/hook, 27-1/2" National C275 rotary.  11" 5000 psi Hydril type GK BOP, 11" 10,000 psi T-3 double Type U BOP, 11" 10,000 psi T-3 single Type U BOP, 3" 5000 psi choke manifold, 180 gallon Koomey closing system, 15000 gallon fuel tank, 500 bbl water tank, 60 bbl trip tank, Totco weight indicator, Totco Torque gage  Price:  $1,250,000

BDW 650 DRILLING RIG  (Ref#1552T)  12,000' working depth, 1000 hp with (2) Cat C15 engines (525 hp each) with National torque converters, 131' x 520,000# Pyramid mast, Yangsi TG225 250 ton block hook combination, Gardner Denver 300 ton swivel, 16' box on box substructure, 22-1/2" Gardner Denver rotary table, (2) Gardner Denver PZ9 triplex mud pumps (1000 hp each) with Cat D398 engines. Mud system (2) working pits 750 bbl total capacity, 100 bbl premix pit, 6x8 centrifugal mud mixing pump w/50 hp electric motor,shale shaker, Harrisburg 2 x 12 desander, 6x8 centrifugal pumps and 5 x 10' separator.  500 bbl and 400 bbl water tanks, 12,000 gal fuel tank, (2) Sullivan Palatek air compressors, wireline unit, choke manifold. (2) Marathon 360kw generators p/b (2) Detroit Series 60 diesel engines, Horn 11" x 5000# double ram BOP, Hydraulic GK 11" x 5000# annular BOP, National Ball Style 4-station 5000# closing unit.  Miscellaneous equipment including centrifugal pumps, air hoist, tongs, slips, elevators, pipe racks, cat walk, handling subs, spare parts and hoses.  Price:  $1,325,000

 

NATIONAL T-32  (Ref#642N)  Single drum, 3 axle trailer mounted, Parmac hydromatic brake, 105' x 250,000# hydraulically raised and scoped mast with racking board, new drill line, 27-1/2" rotary table, kelly, Skytop 4SX 120 ton swivel, 100 ton Skytop Brewster travelling block, Foster cathead, 5000 and 10,000# utility winches, 12V71 Detroit diesel on deck, hydraulic system updated, hydraulic make up and breakout cylinders, substructure, catwalks, stairs, hand rails and V-door, weight indicator, located South Pacific  Price:  $395,000
Available at additional cost:
(4) 8" x 28'-30' dril collars (6-5/8 Reg) with lifting subs
Approx 65 jts (2000') 5" drill pipe (19.90 lb/ft) 4-1/2 IF
Cross over subs for DP to DC and DC to bit
DP and DC slips
5" drill pipe elevators
Ingersoll Rand 900/350 air compressor (wagon type)
Rotary tongs and heads

NATIONAL T45 DRILL RIG  (Ref#4808Ta)  105’ derrick, 60 Series Detroit engine, 5’ substructure, rated for 6000’  Price on Request

NATIONAL 610-M (Ref#15638N)  Manufactured 1980, Depth capacity 13,000' (4024 m) with 4-1/2" drill pipe, National 610 draw works with PARAMAC SSR-28 Hydromatic brake, 1-1/8" drill line, (2) CAT 3406C diesel engine, 400hp each, Rudd & Hodgson Cantilever 133' x 550,000# mast with 10 lines, Racking for 10,500' of4-1/2" drill pipe, 18'6" leg spread at base, Dreco substructure 14' clear height, 18' floor height, 350,000# setback capacity, 390,000# rotary table capacity, National rotary table C-275 2-1/2", No BOP, mud pumps or tubular.  Located Pacific   Price:  $1,800,000

NATIONAL DRECO 550 RIG  (Ref#2691T)  Drawworks mounted on 5 axle Crane Carrier, rated 8000-9000' with 4-1/2" drill pipe, 550 hp Cat 3406 engine, 103' telescoping mast, Ellis Williams 14" duplex mud pump with all new parts and fluid end including liners, heads, valves and setas and pony rods p/b 475 hp Cat engine, 5000' of 4-1/2" drill pipe, subbase with rotary table, rig ramp, top and bottom crew houses, 40 kw generator Magnaplus powered by 4 dcyl Perkins engine, 300 bbl water tank, center walk tub, 3 pipe tubs, 12 drill collars, elevators, slips, rotary tongs  PRICE:  $475,000

NATIONAL 370M DRILLING RIG PACKAGE  (Ref#6134T)  15 load drill rig (2 loads drill collars), 10,500’ (3200m) (Jacknife Triple) depth, 16’ KB to ground, 12.9’ bottom of table beam to ground, National 370M drawworks, Parmac V80 auxiliary brake, Detroit Series 60 diesel engine, 14L, with Allison 6061 transmission (600 hp max power), 510 Dreco 127’ x 340,000# derrick, Dreco one piece center load substructure 53’ x 13.5’ x 14’, 20,000# max pipe setback, Dreco crown block, National 435 G175 block/hook, National P200 swivel, 1” x 5000’ drilling line, National C175S 17-1/2” rotary table, Kobelt spring applied brake caliper, (2) National 8P80 triplex 5-1/2” x 8-1/2” mud pumps with Detroit Series 2000 diesel engines, mud tank with 4 compartments:  440 bbls with mud hoppers, mud guns, agitators and transfer pumps.  Brandt shale shaker, Oilco accumulator, choke manifold, (22) 6” x 30’ x 4 H90 drill collars, (2) 9” x 30’ x 7 H90 drill collars, water tank, light plant, standby light plant, Foster 77 kelly spinner, Hawk Spinmaster 550H pipe spinner  Price:  $990,000 CDN

NATIONAL 370M DRAWWORKS AND ROTARY TABLE  (Ref#6134Tb)  TSM 500 right angle gearbox, National 17-1/2” table, hydraulic catheads, electric/hydraulic pump, (2) Pullmast PL8 hydraulic winches, Leroi 550 air compressor, 80 gallon air tank c/w dessicant dryer, Detroit Series 60 diesel egine (665 hp), Allison 6061 transmission  Price:  $95,000 USD

NATIONAL 370 DRILLING RIG  (Ref#4421N)  Drawworks powered by 60 Series Detroit, 100' x 300,000# Lee C. Moore derrick, 10' x 16' x 35' box type subbase with 400 bbls water tank, 17-1/2" rotary table, 125 ton Gardner Denver swivel, 4-1/4" x 42' kelly with drive bushing
(2) National 8P80 mud pumps powered by Cat D379B
10' x 25' top doghouse
600 bbl 1 pit mud system
10" x 3000 psi annular BOP, 4 station closing unit
Light house, light pltans, catwalk, pipe racks, drill pipe skids, mud mixing pumps, 2 cone desander, automatic driller, drilling recorder, weight indicator, IR standby air compressor, 4000 gal fuel tank (skidded), shell shaker
7500' of 4-1/2" X Hole white band drill pipe, (14) 6" – 6-1/4" drill collars
Price on Request

NATIONAL 110 UE 1500HP SCR RIG (Ref#11029R)  Totally reconditioned to “LIKE NEW"
DRAWWORKS:  NATIONAL 110 UE 1500HP Single Drum Drawworks, LEBUS Grooved, f/1-3/8" Line, Makeup & Breakout Catheads, w/PETRON Driller's Control Console,  Crown-O-Matic,  
Remanufactured – drawworks is 25'L x 9'2"W x 9'6"H
DRAWWORKS POWER: 
APOLLO 752 DC Traction Motor, 1000 HP, w/EMERSON AB34 10 HP Electric Blower Assembly (rebuilt)
APOLLO 752 DC Traction Motor, 1000 HP, w/EMERSON AB34 10 HP Electric Blower Assembly (rebuilt)
BRAKE:
TRADE TECH 88058DS Electric Brake (rebuilt)
DERRICK:
SKYTOP 142'H Cantilever Beam Leg Mast, 1,000,000 Lb. Static Hook Load, Pin-Type, SKYTOP Crown Block w/(6) Crown Sheave Cluster, Crown Safety Platform, Racking Board, Tong Counterweights, Ladder, Derrick Climber, Mast Stand, 3-1/2" Standpipe & Manifold. MAST AND SUB WILL BE RECONDITIONED AND API INSPECTED
SUBSTRUCTURE
SKYTOP 28'W x 26'H x 72'L Swing-Up Substructure, 1,000,000 Lb. Casing Load, 600,000 Lb. Setback Capacity w/Rotary Beams, V-Door Ramp,  Type EB Deadline Anchor, Stairs, Safety Rails (derrick and substructure is rebuilt and will have current API inspection)
POWER SOURCE
Kato II 1050 KW AC Generator, p/b CAT D399 Diesel Engine, w/Air Starter, Radiator, Gauges, Mounted on 10'W x 30'8"L Covered Skid – rebuilt and engines load tested
Kato II 1050 KW AC Generator, p/b CAT D399 Diesel Engine, w/Air Starter, Radiator, Gauges, Mounted on 10'W  30'8"L Covered Skid – rebuilt and engines load tested
Kato II 1050 KW AC Generator p/b CAT D399 Diesel Engine w/Air Starter, Radiator, Gauges, Mounted on 10'W x 30'8"L Covered Skid – rebuilt and engines load tested
SCR UNIT
IDM 4-Bay SCR Unit, w/9'2"L Porch, Switchgear & Instrumentation to Control (3) 1050 KW AC Generators, Includes: (1) Brake Control Box, GE E-9000 Line Series Motor Control Center, Mounted in 10'3"W x 29'2"L Temperature-Controlled House w/(2) EUBANK V72-10733 Air Conditioners, (1) HAMMOND 750 KVA Transformer, (1) HAMMOND 75 KVA Transformer, Mounted on 10'3"W x 29'2"L Skid. – Remanufactured to like new condition
(4) Shopbuilt 1'W x 9'L Electrical Suitcases
(6) Shopbuilt 3'7"W x 40'L Electrical Suitcases w/Grasshopper
AIR PACKAGE  (NOTE:  Mounted on Generator Skids)
WORLD AIR RVK-40 Air Compressor, p/b WEG 30 HP Electric Motor, Mounted on No. 1 Generator Skid
CURTIS Air Compressor, p/b BALDOR 20 HP Electric Motor, w/230-Gallon Air Receiver Tank, Mounted on No. 1 Generator Skid
BEL AIR 3D3HL Air Compressor, p/b BALDOR 20 HP Electric Motor, w/230-Gallon Air Receiver Tank, Mounted on No. 2 Generator Skid
PUMP (Primary)
LS NOI 3NB1300C(10P130 STYLE) Triplex Mud Pump, 1300 HP, w/(3) 6-3/4" x 10" Forged Steel Fluid Ends, Quick-Change Valve Caps & Cylinder Heads, LS NOI 5000 PSI Pulsation Dampener, DOUBLE LIFE 5" x 6" Centrifugal Charging Pump, p/b EMERSON 50 HP Electric Motor, 5000 PSI, Pressure Gauge, Mounted on 9'8"W x 30'2"L Skid
Both mud pumps will have been torn down, cleaned out, calliper all bearings to new specs, re-torque all bolts
PUMP POWER
TWO (2) APOLLO 752 DC Traction Motor, 1000 HP, w/EMERSON AB34 10 HP Electric Blower Assembly
APOLLO 752 DC Traction Motor, 1000 HP, w/EMERSON AB34 10 HP Electric Blower Assembly
All traction motors will be rebuilt
PUMP (Standby)
LS NOI 3NB1300C (10P130 STYLE)Triplex Mud Pump, 1300 HP, w/(3) 6-3/4" x 10" Forged Steel Fluid Ends, Quick-Change Valve Caps & Cylinder Heads, LS NOI 5000 PSI Pulsation Dampener, DOUBLE LIFE 5" x 6" Centrifugal Charging Pump, p/b EMERSON 50 HP Electric Motor, 5000 PSI, Pressure Gauge, Mounted on 9'8"W x 30'2"L Skid  (rebuilt)
PUMP POWER
TWO(2) APOLLO 752 DC Traction Motor, 1000 HP, w/EMERSON AB34 10 HP Electric Blower Assembly
APOLLO 752 DC Traction Motor, 1000 HP, w/EMERSON AB34 10 HP Electric Blower Assembly
Traction motors are rebuilt
ROTATING EQUIPMENT
MUD KING RT275 27-1/2" Rotary Table, w/Split Master Bushings, p/b APOLLO 752 Traction Motor w/EMERSON AB34 10 HP Blower Assembly - rebuilt
MUD KING 450-Ton Swivel (rebuilt)
5-1/4" x 40'L Hex Kelly
VARCO HD Kelly Drive Bushing (rebuilt)
INTERNATIONAL TOOLS Kelly Spinner - rebuilt
TIW Upper Kelly Spinner
TIW Lower Kelly Spinner
TRAVELING EQUIPMENT
IDECO 525-Ton Block/Hook Combination - rebuilt
2-3/4" x 132" Elevator Links
WELL CONTROL EQUIPMENT
HYDRIL GK Type 13 5/8" 5000# Annular Blowout Preventer - rebuilt
SCHAFFER LWS Type- 13-5/8" x 5000 PSI DOUBLE Blowout Preventer - rebuilt
Choke Line:  (1) 4-1/16" x 10M Gate Valve, (1) 4-1/16" x 5M HCR Valve - tested
Kill Line:  (2) 2-1/16" x 10M Gate Valves, (1) 2-1/16" x 5M Check Valve - tested
CPCPB 40-32 5-Station Closing Unit, w/(16) 11-Gallon Accumulator Bottles, Triplex Pump, p/b BALDOR 20 HP Electric Motor, (2) Air Pumps, , 8'W x 8'2"L Skid – pressure tested
5-Station Remote Closing Unit, Mounted in Doghouse
5000 PSI Choke Manifold w/5-Way Cross, (2) 4-1/16" x 10M Gate Valves, (7) 2-1/16" x 10M Gate Valves, (2) 2-1/16" x 10M Adjustable Chokes, Mounted on 8'W x 14'L Adjustable-Height Skid - tested
RIG HOUSES
Shopbuilt 7'9'W x 25'1"L Doghouse w/5'L Covered Porch, Knowledge Box, Bench Storage, Cabinets, Lights, Skidded
All new 480/600 SCR wiring from SCR house/generators to mud tanks and rig lights
Shopbuilt 10'2"W x 33'1"L Change House w/Round Top, Knowledge Box, (24) Lockers, Bench Storage, Cabinets, Washer, Lights, Skidded
(2) Shopbuilt 8'W x 19'10"L Parts Houses, Each w/Round Top, Parts Bins, Skidded
MUD SYSTEM
Shopbuilt 10'W x 9'6"'H x 50'L 543-Barrel Suction Tank w/9'L Covered Porch, (3) Compartments, (5) GROVE GEAR 7-1/2 HP Mud Agitators, Each p/b MARATHON 7-1/2 HP Electric Motor, Mud Hopper, Caustic Tank, Internal Plumbing, Flat Bottom, Top-Mounted Walkways, Stairs, Safety Rails, Skidded
MCM 5" x 6" Centrifugal Mixing Pump, p/b BALDOR 50 HP Electric Motor
MCM 5" x 6" Centrifugal Mixing Pump, p/b BALDOR 50 HP Electric Motor
Shopbuilt 10'W x 9'6"'H x 50'L 543-Barrel Shaker Tank w/10'W x 9'L Covered Porch, (3) Compartments, GROVE GEAR 7-1/2 HP Mud Agitator, p/b MARATHON 7-1/2 HP Electric Motor, Internal Plumbing, Flat Bottom, Top-Mounted Walkways, Stairs, Safety Rails, Skidded
MCM 5" x 6" Centrifugal Desilter Pump, p/b MARATHON 50 HP Electric Motor
MCM 5" x 6" Centrifugal Desander Pump, p/b BALDOR 50 HP Electric Motor
Swaco degasser - new
ODRILL/MCM Linear Motion Shale Shaker –new
ODRILL/MCM Linear Motion Shale Shaker – new
ODRILL/MCM desander w/(2) 10" cones - new
O'DRILL/MCM desilter w/(8) cones - new
Shopbuilt 10' W x 9'6"H x 50' long suction tank. (3) 15 hp Agitators (new). High pressure guns. Pit levelers. Dump gates. Three Dividers. Oilfield Three Runner skid.
WATER/FUEL TANKS
Shopbuilt 10'2"Dia x 42'3"L 500-Barrel Water Tank, Skidded - new
BAKER SPD 2" x 3" Centrifugal Water Pump, p/b TECO 25 HP Electric Motor, Mounted on Generator Skid No. 3
BAKER 2" x 3" Centrifugal Water Pump, p/b TECO 25 HP Electric Motor, Mounted on Generator Skid No. 3
Shopbuilt 8'Dia x 32'3"L 12,141-Gallon Fuel Tank w/(2) SIEMENS Fuel Transfer Pumps, Each p/b TECO 2 HP Electric Motor, w/4'L Covered Porch, Skidded
MURPHY 5-Compartment Lubester w/Pumps, Hoses, Reels, Mounted on 6'W x 13'L Skid
HANDLING TOOLS
VARCO SSW-10 Pipe Spinners
Type DB 3-1/2" x 10 3/4" Rotary Tongs, - rebuilt
5" 350-Ton Drill Pipe Elevators - rebuilt
5" Drill Pipe Slips  - new
6-1/2" Drill Collars Slips - new
8" Drill Collar Slips - new
6-1/2" & 8" Safety Clamps - new
JULING XJF5-35 Air Hoist, 10,000 Lb. Capacity - new
JULING XJF5-35 Air Hoist, 10,000 Lb. Capacity - new
5" Mud Bucket
INSTRUMENTATION
PETRON Weight Indicator, (NOTE: Located in Doghouse – rebuilt)
TOTCO Automatic Driller - rebuilt
M & F Type D Mud Gauge - new
AUXILIARY EQUIPMENT
3-1/2" x 65'L Rotary Hose - new
3-1/2" x 12'L Vibrator Hose - new
3-1/2" x 18'L Vibrator Hose - new
Shopbuilt 5'W x 18"H x 60'L Catwalk, 2-Section, Steel Deck
(3) Sets of (6) 18"H x 28'L Shopbuilt Triangular Pipe Racks - new
Shopbuilt 8'W x 40'2"L Junk Box, Skidded
FIVE STAR Wireline Measuring Device, w/15,000' of .092 Wireline - new
1-3/8" Drill Line w/INGERSOLL-RAND Air Tugger, Chain Driven – new drilling line
Rathole & Mousehole
Fluorescent, Mercury-Vapor & High-Pressure Sodium Rig Lights w/Wiring – all new wiring
Miscellaneous Spare Parts, Valves, Fire Extinguishers, Etc.
No Tubulars. Top drive can be provided for $625,000.
PRICE:  $6,750,000

NATIONAL 80B DRILL RIG  (Ref#6160R)  1000 hp, 12,000' depth capacity,
National 80B S/D Drawworks, Lebus f1-1/4" Line, Parmac 481 Brake, 25" x 49" drum, 46" brake rim, Overrunning Clutch, Driller's Console, (3) Pullmaster Hydraulic Winches, Wireline Unit, Tail Drive.  National Sectional Drive Compound, p/b CAT D379 Diesel Engine, Air Starter, Radiator.  National C-245-125 FH Torque Converter, LeROI 770A Air Compressor, Air Tank, All Mounted on 8'W x 31'L Covered Skid.  National Sectional Drive Compound, p/b CAT D379 Diesel Engine, Air Starter, Radiator, National C-245-125 FH Torque Converter, All Mounted on 8'W x 31'L Covered Skid.  National Sectional Drive Compound, p/b CAT D379 Diesel Engine, Air Starter, Radiator, National C-245-125 FH Torque Converter, All Mounted on 8'W x 31'L Covered Skid.
142'H Derrick Servikces International DA-M-110 mast, 456,000 daN GNC hook load, 338,000 daN (12 lines), racking board, 7'W x 23'H hinged mast stand, rotary hose
Derrick Services International DAS238 Substructure, Box-On-Box, Max Setback Capacity 222,500 daN, Max Rotary Capacity 311,500 daN.  (2) 12'H x 7'9"W x 57'L Boxes & (2) 10'H x 78'9"W x 35'L Boxes, (2) 10'H x 7'9"W x 35'L Boxes, Spreader Steel, V-Door with Stairs, Hercules 120 Deadline Anchor.  Mission 2" x 3" Centrifugal Pump p/b 20 HP Motor, steam heaters,  Steel Wind Walls, Stairs, Rails, Bridon 1-1/4" x 7000' 6 x 19 line with stand.
National 9-P-100 Triplex Mud Pump, Forged Steel Fluid End, Continental-Emsco Pulsation Dampener, National Suction Line Dampener, 1" x 2" Pump with Elec Motor, Tail Drive, Bullwheel, Steam Heater, Skidded and Mounted on 11'W x 27'L Covered Skid with Wind Walls on (3) sides
National 9-P-100 Triplex Mud Pump, Forged Steel Fluid End, Continental-Emsco Pulsation Dampener, National Suction Line Dampener, 1" x 2" Pump with Elec Motor, Tail Drive, Bullwheel, Steam Heater, Skidded and Mounted on 11'W x 27'L Covered Skid with Wind Walls on (3) sides.  
National T275 27-1/2" x 53-1/4" Rotary Table
3-Tank Mud System Package
8'H x 11'W x 48'L Suction Tank, Including 10'L Pump House with (3) 5" x 6" Centrifugal Pumps p/b Elec Motors, Hopper, Skidded
8'H x 11'W x 48'L Volume Tank, Including 10'L Pump House with (1) 5" x 6" Centrifugal Pump p/b Elec Motor, Degasser, Skidded
8'H x 11'W x 36'L Shaker Tank with (2) 10 HP Agitators, Skidded
(2) Swaco Linear Shale Shakers
8'H x 11'W x 30'L Water Tank, 10'L Pump House with (2) Mission 2" x 3" Centrifugal Pumps p/b Elec Motors, (2) fuel transfer pumps, Skidded
5'H x 7'W x 6'L Trip Tank Mounted on 7'8"W x 18'L Skid with Mission 1" x 2" & 2" x 3" Centrifugal Pumps, Radiator with Elec Motor
10'W x 25'L Doghouse with 4'L Porch, 31'OAL, Totco Weight Indicator Panel
8'Dia x 25'6" Fuel Tank, Skidded
(2) 42"H x 9'6"W x 40'4"L Catwalk Sections
10'W x 48'L Toolhouse with Shelves, Bins, dual grinder, Vise, Skidded
4'4"H x 7'8"W x 38'L Junk Basket with Elevator Bails, Mud Lines and Contents
4'H x 3'W x 6'L Sub Basket with Lift Nubbins Changeover and Life Subs
Stacked for 4 years
Price:  $985,000

NATIONAL  80-B  DRILL  RIG  (REF#3392R) – 12,000' Depth Capacity National 80-B single drum 1000 HP Drawworks,   Lebus  1-1/4",   Parmac 481  Hydromatic Brake,   National 3 Section Compound,  each section with CAT D379 Engines,  Air Starters,  Radiators,  National C-245-125 Torque Convertors,  Oilworks 390 Air Compressors,   Each section is Shed Covered,  DSI 142'Hx24'W Cantilever Mast,  769,000#SHL,   Crown Block with Six 48" Sheaves,   One 56" Fastline Sheave,  DSI 21'6"Hx42'Wx57'L Box-On-Box Substructure with 16'H Step Down,  Two Gardner Denver PZ 9 Triplex Mud Pumps with Forged Steel Fluid Ends,  Hydril K-20-5000 Pulsation Dampeners,  Chain Driven Powered by CAT D 398 Engines,   Air Starter, Radiator, Air Clutch, Master Skidded,  Kato 300 kW & Bemac 300 kW AC Gen Sets,   Each Powered By CAT D353 Engines,   National A-275 27.5"x53.25" Rotary Table,   Two 2.25" x94" Elevator Links,   Doghouse, Parts/Change House, Mud Suction Tank, Shaker Tank, Water Tank, Diesel Tank, Junk Box,   Mud System Package,   Brandt Tandem Linear Motion Shale Shaker,   Additional Items Not Listed.  Rigged up in Texas  Price:  $3,400,000

NATIONAL 80B DRILLING RIG  (Ref#9912Ta)  Mechanical 1000 hp, rated to 14,000’ with 4-1/2” drill pipe, National 80B drawworks with Oilwell 1600 2-section compound p/b (2) Cat D379 engines with National C245-125 torque converters, Warrior 250H14HR 250 ton top drive, 136’ x 600,000# capacity mast, 20’ high box on box substructure with 16’9” clear height, 27-1/2” BDW 500 ton rotary table, 1-1/4” 6x19 IWRC drill line, 350 ton McKissick block with 5 sheaves grooved for 1-1/4” drill line, 350 ton McKissick hook,  (2) National 10P130 mud pumps p/b D399 Cat engines,. (2) mud tanks 875 bbl total capacity, (2) Detroit 60 Series 380 kw generators mounted in 11’6” W x 40’L house, Hydril GK 11” x 5000 psi annular BOP, Townsend 11” x 5000 psi double BOP, 3-1/16” x 5000 psi choke manifold with (2) manual chokes, gas buster, 7-station accumulator with one triplex and two air pumps, toolpushers quarters, 10,000 gal fuel tank, 500 bbl water tank, Type B rotary tongs, handling tools, pipe racks, air compressors, Varco SSW10 pipe spinner  Price on Request

NATIONAL 80B DRILLING RIG  (Ref#9912Tb)  Mechanical 1000 hp, rated to 14,000’ with 4-1/2” drill pipe, National 80B drawworks with Oilwell 1600 2-section compound p/b (2) Cat D379 engines with National C245-125 torque converters, Tesco 250-HXI 250-ton top drive, 136’ x 600,000# capacity mast, 20’ high box on box substructure with 16’9” clear height, 27-1/2” 500 ton rotaty table, 1-1/4” 6x19 IWRC drill line, Gardner Denver 300 ton block,  (2) National 10P130 mud pumps p/b D399 Cat engines, (2) mud tanks 884 bbl total capacity, (2) Detroit 60 Series 380 kw generators mounted in 11’6” W x 40’L house, Hydril GK 11” x 5000 psi annular BOP, Townsend 11” x 5000 psi double BOP, 4-1/16” x 5000 psi choke manifold with (2) manual chokes, gas buster, 8-station accumulator with one triplex and three air pumps, toolpushers quarters, 10,000 gal fuel tank, 500 bbl water tank, Type B rotary tongs, handling tools, pipe racks, air compressors, Varco SSW10 pipe spinner  Price on Request