June 18, 2025
BARGES AVAILABLE
For additional information please contact Anthony Iorio at Tel (516) 536 7375 - rigs@sunmachinery.com
215’ x 25’ x 12’ CRANE/SPUD BARGE WITH QUARTERS (Ref#4216)
Built 1968, bow rake, 3/8” deck/sides/bottom, 569 GT, (2) 22” spud wells, (2) 14” x 45’ spuds, Clyde triple drum winch p/b GM471, with cable sleeves and cable, (2) spud towers. Deck house 576 sq ft with crew quarters for 6 persons, head, galley, AC/heat, water treatment, washer/dryer, fire fighting equipment. Crane: 1989 Applied Hydraulic Systems Nautilus 901.2-80 marine pedestal mounted hydraulic ring crane with GM471 diesel engine, set on 6’ diameter base, 80’ boom, 12.5 ton capacity, auxiliary winch. 700 gal fuel capacity, potable water tank, surveyed October 2020 and found it be in good condition w/fair market value $650k, located Louisiana Price: $485,000
282’ x 54’ x 12’ COULD BE USED AS A FLAT DECK BARGE (Ref#4257)
Built 1980 in the USA, Double Skin, 30,000 BBL tank barge, trail rake, 1891 gross tons, engine, fuel tank and pumps have been removed, not USCG certified for tank barge use, can be converted to a flat deck barge, located Louisiana Price: $350,000
250' x 60' x 11’ CRANE BARGE WITH AMERICAN 9520 (220 ton capacity) CRANE (Ref#3651)
185’ x 40’ x 7’ FLAT DECK BARGE (Ref#4259)
Box x rake, no spuds, excellent condition inside, currently clearing everything off deck, located Louisiana Price: $425,000
195’ x 35’ FLAT DECK BARGE WITH BIN WALLS (Ref#4168a)
(4) available, 1600 ton, used as rock barges, built approx. 1975, used in fresh water for rip rock, good condition, decks show signs of wear, one has rake and box, the others are two boxes, they stick out of the water by about 3-1/2’, located Arkansas, will not sell separately Price for all 4 barges: $1,050,000
195’ x 35’ HOPPER BARGES (Ref#4196)
Three available, located in Louisiana Price: $250,000 each
180’ x 54’ x 12’ BARGE (Ref#4221)
Ashphalt barge, has some residual asphalt in it and could not be placed back into tank barge service but would make a good dock or crane barge. No leaks. Located Mississippi Price: $275,000
180’ X 50’ BARGE WITH 4 LEVEL DECKHOUSE (Ref#4183)
Built 1974, 180’ x 50’ x 10.6’, 4 level deckhouse extends full width and breadth of the vessel, 40,000 SQ FT cabin space, barge is non propelled. (2) 8V71 Detroit diesel engines powers 150 kw AC generator and (1) 371 Detroit diesel drives 50 kw AV generator. 1000 gal fuel oil tank. Former COI for river service for 900 persons. Barge was used as a floating hospital. It was drydocked in 2010 and received commercial blast and 3 coat paint system, outfitted with 75 zinc anodes, new sea and overboard valves, plate and frame renewal in generator room space, given USCG dry dock certificate. Vessel has remained in fresh water since. Located New York Price: $550,000
165’ x 43.5’ x 12’ INLAND DECK BARGE WITH BIN WALLS (Ref#4243)
Built 2008, Bins walls: 138’L x 36’W x 4’H, ½” wall material. 5/8” deck plate, 3/8” wide plate, 3/8” bottom place, 3/8” bulkheads, ABS expired but can easily be brought back Price: $825,000
154’ x 54’ x 12’ CRANE BARGE WITH MANITOWOC 4000W CRANE (Ref#4251)
150’ x 74’ x 9’ DERRICK BARGE (Ref#4262)
130’ x 30’ FLAT DECK BARGE (Ref#4217)
Built 2008, approx 6-7’ high, small rake on both ends, clean condition and ready for immediate use, it uwas used to carry steel beams (as seen in the photos), located Mississippi Price: $200,000
110’ x 32’ x 9’ DECK BARGE (Ref#4194e)
Price: $325,000
90’ x 30’ x 4’ STEEL BARGE (Ref#4204a)
Built 2016, recently refurbished, front of barge racked with 3/8” x 12” head log, front and center of barge has 6” tow bit, (14) 20 lb zincs welded to barge, 18” diameter spud wells, 16” spuds, 5 water tight comparts (4 main and one crash bulkhead), repainted from top to bottom, located Northeast US Price: $425,000
86’ x 28’ x 6’ SPUD BARGE (Ref#4016)
Raked one end, 2 spuds powered by 4 cyl GM engine, large doghouse on the stern,approx. capacity 200 ton, 46 GT. Reworked in shipyard for COI, sides and bottom in good condition. Barge was no longer needed so they never applied for COI. Located Louisiana Price: $200,000000
SELF-PROPELLED CRANE SPUD BARGES (Ref#3605a)
80' x 26' x 6'. Draft 3.5'. 2080 sqft deck area. Posted aluminum pilot house. Hydraulic crane, 10 ton capacity at 10' with 60' boom. Spuds: (2) 8" x 8" x 30', hydraulic rams. Engines: (2) 8V71s with 3:1 reduction gears. 3.5" x 12' stainless steel shafts. 38" x 34" propellers. Sewage plant: USCG approved MSD inside barge. 20kw single phase 24 generator. Fuel capacity: 2,200 gal, sleeping capacity: 2. Shower, lavator, (2) heads, stove, refrigerator, microwave. Designed for the oil patch. Located Louisiana. Price: $635,000
SELF-PROPELLED CRANE SPUD BARGES (Ref#3605b)
56' x 20' x 5', 1000 sqft deck area. Posted steel pilot house. 10 ton hydraulic crane with 50' boom. (2) 8" x 8" x 27' spuds with hydraulic rams. Engines: (2) Detroit 471s. Fuel capacity: 2,000 gal. Designed for the oil patch. Located Louisiana. Price: $175,000
75’ X 26’ X 5.5’ DECK BARGE (Ref#4265)
(3) 12” diameter spud wells, no spuds included, 8” diameter drilling manhole aft of forward bulkhead, always used in fresh water, build date unknown, located New York Price: $42,500
75’ x 26’ x 4’ FLAT DECK SPUD BARGE (Ref#4136b)
2 spuds, Detroit diesel to power spuds, located Midwest USA (excavator availble at extra cost) Price: $195,000
50’ x 40’ (15.2M x 12.2M) JACK UP BARGE (Ref#4256a)
Built 2014, (4) 60’ spuds, 165 hp 6 cylinder diesel engine, 2500 psi operating pressure, 375 ton lift capacity, located West Coast Canada Price: $500,000 USD
(2) 40’ x 16’ x 4’ SECTIONAL BARGES (Ref#3634b)
2 spuds (12” x 20’ each), pulling out of water and will be sandblasted and painted, located Alabama Price: $100,000 for both
40’ x 10’ x 5’ SECTIONAL BARGES (Ref#4249)
New Build, ¼” steel plate, internal frame work (uprights and crossbeams) no further than 2’ apart, 6 uprights per frame, 4 deck cleats, bulkhead, buyer’s option for rake or box ends, flatbar reinforced deck and sides, rods for connection, lifting eyes. Spud wells at extra cost. Sandblasted, primed and painted with Sherwin Williams Seaguard 500 paint, 50% deposit with order, 12 week delivery Price on Request
35’ x 12’6” x 42” SPUD BARGE (Ref#4195a)
Good condition, Located Texas Price: $50,000
35’ x 12’6” x 36” DECK BARGE (Ref#4195b)
A-frame (not shown in picture), good condition, located Texas Price: $50,000
For additional information please contact Anthony Iorio at Tel (516) 536 7375 - rigs@sunmachinery.com