Portadrill

Portadrill RVT, RV6T, TKS, TKT, 10TK, 10TG, 524 ,523, 522, 521, 520, 505, 503, 502, 501, 1500  

Last updated: 03/05/2024 3:42 PM

PORTADRILL RV6 DRILL RIG  (Ref#3524T)  Triple drum drawworks, 35” table opening, 6” x 18’ kelly, 35’ derrick, John Deere diesel engine, Sullair 375/125 air compressor (engine needs work), 6” centrifugal pump (removed, but available), mounted on International tandem axle truck with diesel engine  Price:  $170,000
Available at extra cost:
(2)Goulds 12” and 10” 1000 gpm turbine pumps, shafts, 6 cylinder Detroit, new right angle drive
Elevator clamps, Moab reverse bits, platforms, 800’ reverse drill pipe and rigging

PORTADRILL RV6T REVERSE CIRCULATION RIG  (Ref#7119T)  Manufactured 1977, triple drum drawworks, mounted on Stering single axle trailer with International twin screw tractor with 277 Industrial diesel engine, factory air swivel, Detroit 671 diesel deck engine, 35’ derrick, 30” opening table, 6” centrifugal pump, 6” x 18’ kelly, 2012 Sullair 375/150 air compressor with Cummins diesel engine, 2 fuel tanks, 4 leveling jacks,, 300’ of 6” x 16’ drill pipe with 1-1/4 steel air line on outside of pipe with “O” ring, tandem axle pipe trailer, has drilled 500’ wells x 28” diameter and set 16’ casing, ready to drill  Price:  $340,000

PORTADRILL TKS  (Ref#10065R)  Manufactured 1979, excellent condition, Detroit 8V92 deck engine with clutch, Detroit 6V92 drive engine (both rebuilt), 750/250 Sullair air compressor, Bean injection pump, new front tires, excellent rear tires, (2) 7" Portadrill rotary tables, mounted on Ford truck, 35,000 miles, approx 1500' of 4-1/2" flush joint drill pipe (2-7/8 IF), needs some gauges on drillers station  Price:  $80,000

PORTADRILL TKS DRILL RIG  (Ref#6628T)  Manufactured 1978, Leroi developmental air compressor, 3 x 4 centrifugal pump, Detroit 12V diesel deck engine, 21’6” kelly, mounted on White Road Boss tandem axle truck with 8V Detroit diesel, rod box, no carousel, 300’ of 3-1/2” x 15’ and 20’ drill pipe, sitting since 2019  Price on Request

PORTADRILL TKT MUD ROTARY RIG  (Ref#8015Tb)  Manufactured 1984, Leroi 600/250 air compressor, 5-1/2 x 8 duplex mud pump, 53' tubular mast, racking bord, hydrostatic double drum drawworks, 7-1/2" hydrostatic rotary table, hydraulic pulldown, 24' kelly bar, 3000' capacity sandline, mounted on 1982 Kenworth C500 truck with 6V92TAC Detroit diesel, breakout tongs, hydraulic breakout wrench, hydraulic cathead with spinning chain, pipe rack, 1 front and 2 rear hydraulic jacks, 2-7/8" upset x 20' pipe, 4-1/2" flush joint x 20' pipe  Price:  $194,500

PORTADRILL TKT (Ref#15447RA) Manufactured 1978, mounted on 1979 International Paystar 5000 with diesel engine, 750/250 Sullair compressor
Price rig only:  $105,000
Price with pipe and tools:  $115,000
Also available with the following:
(Ref#15447RB) Mud system available at additional cost

PORTADRILL TKT PROSPECTOR (Ref#13024R) Manufactured 1978, mounted on Kenworth C-500 with Detroit engine, 500/250 Leroi air compressor, new GD 5 ½ x 8 mud pump, 8" retractable rotary table, new 4-1/2" Kelly, 25gpm Bean injection pump, good condition, no pipe     PRICE:  $139,500

PORTADRILL TKT  (Ref#1971N)  Manufactured 1978, 2000' depth capacity,  6V92 Detroit diesel engine, PTO driven, 15 gpm water injection, 256 S2 LeRoi air compressor (needs work), 53' mast (to run Range III casing), 7-1/2" retractable table, 4-1/2" x 24' kelly, no mud pump, mounted on Kenworth truck, no pipe, hydraulic leveling jacks, running condition  Price:  $85,000   

PORTADRILL TKT (Ref#417N) Manufactured 1976, PTO, mounted on International Paystar 5000 with rebuilt 350 Cummins engine, 6 x 8 Gardner Denver mud pump, 256S2 Leroi compressor, Bean water injection, 7-1/2" retractable table, 53' hydraulically raised mast, hydraulic pulldown, hydrostatic, breakout tongs, hyd spinning chain, weight indicator, 4-1/2" x 34' hex kelly (fluted available) no pipe rack or rod box (available but not on rig now)    PRICE:  $179,500
1975 INTERNATIONAL PIPE TRUCK (Ref#427Nb) rebuilt Cat 3208 engine  Price:  $24,000
4-1/2" and 2-7/8" x 20' pipe available at additional cost

PORTADRILL TKT PROSPECTOR (Ref#8281N)  Manufactured 1978, Triple drum, new bearings on drawworks and pulldowns, 5-1/2" x 8" Gardner Denver duplex mud pump, no air compressor, 57' x 60,000# hydraulic raised mast, Racking board, Mounted on 1978 Kenworth tandem axle truck with 8V92 Detroit diesel and PTO, 4 hydraulic leveling jacks and 2 rear screw jacks, Hydrostatic drive drawworks and rotary table, water injection, 8-1/2" retractable rotary table (4 speed transmission on rotary table), will run Range 3, 4-1/2" x 25' kelly, 4 speed hyd pulldown  Price:  $95,000

PORTADRILL 10 TKT  (Ref#1236T)  Manufactured 1974, 5-1/2 x 8 Gardner Denver chain driven mud pump (rebuilt), 256 LeRoi air compressor (rebuilt), 7-1/2” retractable table, mechanical clutches, pulldown, 4-1/2” x 23’ kelly (mast is set up for 30’ kelly), mounted on 1999 Kenworth truck with 440 hp Cat engine, PTO, pipe spinner, breakout tongs, water injection pump, 3 hydraluc leveling jacks, good condition,  rebuilt hydrostate, chain cases and rotary table, 200’ drill pipe and tools    Price:  $265,000.

PORTADRILL 10-TKT  (Ref#14689T)  Built 1974, table drive, mounted on Paystar 5000, Fuller 13 speed transmission, (2) Leroi air compressor, 500' of 4-1/2" drill pipe, 7 air hammers,
1976 KENWORTH W900 WATER TRUCK  1600 gallon flat newer water tank, Cummins engine, 13 speed
3 x 4 mud pump mounted on trailer
Price:  $142,500

PORTADRILL 10TK RIG PACKAGE  (Ref#7493T)
PORTADRILL 10TK  Manufactured 1979, 2 drum drawworks plus sandline, Gardner Denver 6 x 8 mud pump, 256 LeRoi air compressor, 8-1/2" retractable table (can run 16" casing through table opening), 32' fluted kelly, extended 60' mast, 32' kelly, pull down chain on a 4-speed transmission, racking board holds over 3000' of 40' stands, spinning chain, mounted on 1979 International Paystar 5000 truck with Detroit Silver 92 engine, PTO, 13 speed transmission, 3 hyd leveling jacks (also comes with mounting beam to install two more jacks across belly of mud pump and a fold up work floor on back of rig).  Well maintained
1400' of 2-7/8" x 20' pipe (2-3/8 IF)
400' of 4" x 20' pipe (2-7/8 IF)
Collars, bits, elevators, etc.
1997 Kenworth T80 water truck, 4000 gallon tank, M14 Cummins, 10 speed transmission, 6 spray nozzles
1980 Ford 9000 service truck, tandem axle, Detroit straight 6 engine, pipe racks, toolboxes
Package Price:  $720,000

PORTADRILL 10TK  (Ref#12632N)  Manufactured 1978, 250 Leroi air compressor (rebuilt), 5-1/2 x 8 Gardner Denver mud pump, 44' mast, 28' kelly, 8-1/2" retractable table, 1200' of 4-1/2" x 20' (2-7/8 IF) pipe, (2) drill collars, subs, mounted on 1978 Kenworth truck, Detroit diesel engine, PTO   Price:  $95,000

PORTADRILL 10TK  (Ref#13448)  Manufactured 1978, LeRoi 256S2 air compressor, Detroit 8V71 deck engine, Mounted on 1961 Peterbilt, 3 x 4 centrifugal pump, good condition  Price:  $75,000

PORTADRILL 10TK  (Ref#1769T)  Manufactured 1976, 3 x 4 centrifugal mud pump, LeRi 256S2 air compressor (very low hours on rebuilt), Detroit 8V92 deck engine, mounted on 1976 Paystar 5000 truck with International diesel engine, 3 hyd leveling jacks, 8-1/2" retractable table, 4-1/2" fluted kelly, new swivel, racking board, 38' mast, BJ tongs, air hammer, spare TKT transmission, some tools,
800' of 4-1/2" x 15' pipe
1978 INTERNATIONAL PAYSTAR 22' flat tank, 2200 gallon, 400 Cummins  
Package Price:  $100,000

PORTADRILL 10TK (Ref#1662R) Manufactured 1974, PTO, mounted on 1974 Diamond Rio with Detroit 8V92 Detroit engine (3 years old), extended mast, rebuilt drawworks, (2) Leroi 256S2 air compressors 4cyl and 2 cyl, no mud, sandline, 4-1/2" x 23' Kelly, breakout tongs, 8" retractable table, air clutches, hydraulic pulldown, pipe rack, 1 front & 2 rear hydraulic leveling jacks, 200' of 4-1/2" x 15" drill pipe, rig in operating condition    PRICE:  $79,500

PORTADRILL 10TK DRILL RIG  (Ref#3598T)  Manufactured 1974, Leroi 250 air compressor, 3 x 4 centrifugal mud pump, Detroit 6 cylinder Silver deck engine, mounted on old truck, breakout wrench, rod box, currently working, 700’ drill pipe (300’ of 15’ and 400’ of 20’)  Price on Request

PORTADRILL 10TK  (Ref#14681Na)  Manufactured 1972, Atlas Copco 586/125 Model DR4 air compressor, 6V71 Detroit diesel on deck, Mission 3 x 4 mud pump, hydrostatic drawworks, 15 gpm Bean water injection pump, line oiler, 42' mast with rack for pulling double 15' stem, 4-1/2" kelly, 8" retractable table, 60,000# pullback, 60,000# hoist capacity, 5,000# winch cap, mounted on 1972 International tandem axle truck with DV550 (200 hp) diesel engine, one owner rig, well maintained, bare rig  Price:  $95,000

PORTADRILL T10 (Ref#1954Nb)  Trailer mounted, 56' x 125,000# hydraulically raised mast, 12" Ideco table, 471 Detroit diesel, 7-1/2 x 10" duplex mud pump, 50 ton swivel, 1300'of 4-1/2" x 31' bottleneck drill pipe, Drilled (4) 24" wells, Located Central America  Price:  $190,000

PORTADRILL 10 TG (Ref#4907R) Manufactured 1969, Detroit 6V71 deck engine, mounted on CCC with 501 gas engine, 600/125 air compressor, no mud, 4-1/2" x 27' Kelly, 7-1/2" retractable table, mechanical clutches, hydraulic pulldown, pipe rack, 3 hydraulic leveling jacks  PRICE:  $69,500

PORTADRILL 10TG  (Ref#1232N)  Manufactured 1968, 600/125 air compressor, 3 x 4 centrifugal pump, Detroit 6V71 diesel deck engine, rig and deck engine completely rebuilt, mounted on 1979 Peterbilt truck with diesel engine – Price rig only:  $105,000
800' of new 3-1/2" IF drill pipe.
1986 Kenworth 1500 gal Flatwater truck
Tandem axle mud tank w/shaker
20K pintel hitch tilt trailer
Ford 555D backhoe w/extend boom
Package Price:  $175,000

PORTADRILL 10TG  (Ref#12116T)  Manufactured 1968, 500/125 Atlas Copco air compressor, 3 x 4 Mission pump, 671 Detroit diesel, 4-1/2" x 24' kelly, 7-1/2" retractable table, hydraulic pulldown motor needs work, mounted on 1968 International tandem axle truck with gas engine, low miles, 4 hammers and 270 and 250 4-1/2" x 15' pipe with 2-7/8 Price:  $45,000

PORTADRILL 10TG  (Ref#4132)  Manufactured 1966, 400/250 air compressor, 6V71 Detroit on deck, 7-1/2" retractable table, 18' kelly, table and drawworks rebuilt in 1990, 225' of 4-1/2" x 15' drill pipe, all tools, Mounted on 1965 International 190 with 671 Detroit engine, mast sandblasted and painted, rig primed, Good condition            Price:  $23,000

PORTADRILL 10TE  (Ref#14066Ta)  Manufactured 1963, sitting several years, mounted on 1970 Kenworth truck with Detroit V12 engine, PTO, no mud pump, 900/120 air compressor, 7-1/2" retractable table, rod box, 4 hydjacks, pulldown, mechanical clutches, 4-1/2" x 23' fluted kelly, breakout wrench, swivel, set up for 4-1/2" x 15' and 4-1/2" x 20' pipe  Price:  $44,500
Pipe available at extra cost
GARDNER DENVER 5-1/2 X 8 MUD PUMP  (Ref#14066Tb)  only 60 hours, trailer mounted  Price:  $27,500

PORTADRILL 526  (Ref#813T)  Manufactured 1979, 5-1/2 x 8 Gardner Denver mud pump, Atlas Cpoco piston air compressor, Ford tri-axle truck, Cat 3408 engine, 8" retractable table, 20' kelly, 40' mast, 2 rear, 1 front leveling jacks, 280' drill pipe  POR

PORTADRILL 524 DRILL RIG  (Ref#7762Ta)  Gardner Denver 5 x 6 mud pump, 250/120 developmental air compressor, 3 cylinder Bean pump, 7-1/2” retractable table, mounted on 1993 International truck Model 9400 with Cummins N14 (350 hp) engine, PTO, 4 leveling jacks, rod box, 400’ of 2-7/8” x 20’ drill pipe, wrenches, tools, currently working  Price:  $105,000

PORTADRILL 524-3A DRILL RIG  (Ref#3045T)  Manufactured 1980, 5-1/2 x 8 Gardner Denver mud pump, LeRoi 256S2 air compressor, mounted on 1979 Kenworth C500 truck, 500’ of 3-1/2” x 20’ drill rod, stabilizer, subs and bits  Price:  $77,500

PORTADRILL 524  (Ref#2592R)  Manufactured 1979, mounted on 1979 International Paystar 5000 truck, 5 leveling jacks, 7-1/2” retractable rotary table, 26’ kelly, 2” Little Giant swivel, 5-1/2 x 8” Gardner Denver mud pump, 256 LeRoi air compressor, racking board  Price:  $112,500

PORTADRILL 524 DRILL RIG  (Ref#374T)  Manufactured 1975, mounted on 1975 International truck, 5 x 6 mud pump, Atlas Copco DF2 air compressor, Cat 3208 engine, 8” retractable table, working condition  Price:  $65,000

PORTADRILL 524  (Ref#2357N)  Manufactured 1975, mounted on 1975 International Paystar 5000 with 6V71 Detroit engine (rebuilt), PTO, 5 x 6 Gardner Denver mud pump (needs rebuild), Worthington developmental air compressor, Little Giant swivel, 7-1/2" retractable table, 23' x 3-1/4" kelly, chain pulldown, mechanical clutches, sandline, 3 hyd leveling jacks, no breakout wrench, good condition, not run in three years  Price:  $55,000
Pipe and tools available at extra cost

PORTADRILL 524  (Ref#5789N)  Manufactured 1973, semi-trailer mounted, Detroit 6 cylinder diesel engine, compressor needs work, 5 x 6 mud pump,  Price:  $75,000

PORTADRILL 524  (Ref#12767R)  Manufactured 1971, 350 Cummins engine, 5-1/2 x 8 mud pump, 7-1/2" retractable table, 4" kelly, 3 leveling jacks, chain pulldown, mounted on 1971 International truck, 350 Cummins engine, 300' of 2-7/8" IF joints, 100' of 4-1/2" IF x 2-7/8 joints  Price:  $65,000

PORTADRILL 522 DRIL RIG  (Ref#3959Ta)  Mounted on 1975 International with DT466 engine (engine needs work), 5-1/2 x 8 Gardner Denver 200-FXX-001 mud pump, not used since 2016
PORTADRILL 524 DRILL RIG  (Ref#3959Tb)  kelly, missing rotary table, no leveling jacks Mounted on International truck, ex-government rig
PRICE FOR BOTH RIGS:  $55,000

PORTADRILL 521  (Ref#3784N)  Retractable table, hydraulic pulldown, 5 x 6 Gardner Denver, 300' FEDP, (1) collar, mounted on 1987 Ford 8000 truck.
1000 gooseneck water trailer
Pipe trailer
Package Price:  $70,000

PORTADRILL 520  (Ref#2058)  Manufactured 1978, 5-1/2" x 8" GD mud pump, Mounted on Ford 8000 with 3208 Cat, 3 hydraulic leveling jacks, 40’ mast, 4-1/2” x 23’ kelly and kelly bushing, 6” rotary table, retactable 18” opening, Rod box, all handling tools (wrenches, subs, pipe lifting subs, pipe)  Price:  $92,500

PORTADRILL 503 (Ref#9236RA) PTO, mounted on 1975 International with 549 gas engine, 5x6 GD mud pump, 580/100 air compressor, 5" stationary table, 20' x 4" fluted kelly, 3 part lines, has drilled to 2100', sitting 2 years but running when parked, no leveling jacks, 2000' of 2 3/8" x 20' Mayhew regular pipe available  POR

PORTADRILL 502  (Ref#11604)  Manufactured 1955, mounted on International R190 truck w/6 cyl OHV engine, single axle, 5 x 8 Gardner Denver mud pump, 35' mast, 25' kelly, hydraulic pulldown  Price:  $35,000

PORTADRILL 501  (Ref#12980)  1985 International single axle truck with 9 ltr diesel engine, PTO, developmental air compressor, 5 x 6 Gardner Denver friction clutch.
1985 Ford water truck, 1000 gal tank, single axle
500' of 2-3/8" x 15' drill pipe
Shop made pulling unit on 1985 F600 single axle truck
Price on Request

PORTADRILL 501  (Ref#2665Nc)  Manufactured 1965, no mud pump, mounted on Ford F700 truck, needs work, good for parts  Price:  $19,000

WINTER WEISS/PORTADRILL 500 AND WATER TRUCK  (Ref#6890T)  Rig built 1952, trailer mounted, 2 drums, andline, 5 x 6 duplex mud pump, pull down, rotary table, 5” Kelly, 6 cylinder 250 gas engine, hydraulic leveling jacks on front, mechanical leveling jacks on rear, 400’ of 2-7/8” x 15’ drill pipe.  Rig is pulled by 1977 International water truck with 1850 gallon tank powered by 318 diesel engine.  Last drilled 2020
Package Price:  $47,500

PORTADRILL 500 (Ref#3744RB) unmounted, 5 ¼" rotary table, GD 4 ½ x 6 mud pump, Kelly & swivel, bailing drum  Price:  $14,000

PORTADRILL 1500 (Ref#270N)  1500' capacity, Manufactured 1970, double drum drawworks with sandreel, 42' one-piece mast, 2 tongs to brake out, portadrill swivel, 2 travelling blocks, mechanical clutches, Gardner Denver FD-FXX 5-1/2 x 8 mud pump, 10" Gardner Denver RT-10 rotary table, double drum, 22,000# capacity (4 lines), 5/8" cable, winches, mounted on 1985 International 3 axle truck with GMC 671, 3 hydraulic leveling jacks, Located Mexico  Price:  $105,000

PORTADRILL 12TK DRILL RIG  (Ref#3369Ta)  Manufactured 1972, Detroit 318 engine, 7-1/2” retractable table, 4” x 36’ kelly, chain pulldown, mounted on International 4900 tandem axle truck with 466 DT engine, 10 speed transmission, 400’ of 4-1/2” x 20’ (3-1/2 IF) drill pipe, 700’ of 4” x 30’ FH drill pipe, handling tools, last used 2021, 4 x 3 centrifugal MCM pump with John Deere engine  Price:  $93,500

PORTADRILL 120  (Ref#9801T)  Manufactured 1968, 5 x 6 Gardner Denver mud pump, 6" stationary table, 3-1/2" x 23' kelly, mounted on 1987 Peterbilt with diesel engine, PTO, pipe rack  
1989 Kenworth Water Truck, diesel engine, 9 sp transmission, 2500 gallon plastic tank
Dual axle trailer with Ford backhoe
Wheatley 6 x 6 mud pump (no engine)
Many spares
200' of 2-3/8" x 20' pipe
Package Price:  $95,000

PORTADRILL (Ref#6404T)  Manufactured 1969, 6 x 6 Gardner Denver mud pump, 34' mast, mounted on 1979 Ford with Cat 3208 engine, 500' (2-7/8 IF) drill pipe, drilled to 900'  Price on Request

PORTADRILL DRILL RIG  (Ref#3249T)  Manufactured 1978, Gardner Denver 5 x 6 mud pump, no air, 8” retractable table, breakout wrench, hydraulic pulldown, mechanical clutches, mounted on Brockway with Detroit engine, 4 hydraulic leveling jacks, sitting since 2018  Price on Request