20-Nov-2024 9:02 AM

CURRENT MARINE SPECIALS

This is only a sample of what we are featuring; we have hundreds of vessels on our website for you to explore

FOR ADDITIONAL INFORMATION CONTACT ANTHONY IORIO AT (516) 536-7375 or rigs@sunmachinery.com

PUSH BOATS	LIFT BOATS	BARGES	TANK BARGES
TUGS	LANDING CRAFT	FERRIES	DREDGES
SUPPLY/WORK/CREW BOATS	FISHING/OYSTER BOATS

14’ X 6.56’ LANDING CRAFT AND 40’ X 50’ SECTIONAL CRANE BARGE PACKAGE (Ref#4174)

50’ x 40’ BARGE made up for (4) Redrag barge sections pinned together, 189” x 45’ spuds. Linkbelt 40-ton crane with Tier III engine (California compliant)
14’ X 6.56’ LCM LANDING CRAFT, built 1953, refitted 1993, non-California compliant 671 diesels (used less than 300 hrs per year)
Located California
PACKAGE PRICE: $350,000

100’ X 40’ LANDING CRAFT (Ref#4054)

Built 1979 / 1995, 100’ overall length x 86’ registered length x 40’ beam, 5’ average draft, 250 ton cargo tonnage, 90’ x 37’ deck area, 24’ bow gate width, main engines: (2) GM 12V71 850 hp, (2) twin dsic MG-514 rreduction gears 2.5:1 ratio, (2) fixed pitch propellers, (2) 45kw GM 471 generators, 7 knots max speed, 35 gph max fuel consumption, 35,000 gal fresh water capacity, 2000 gal potable water capacity, 7000 gal fuel capacity, 2 cabins, 4 berths, galley, max persons 4, 77 GT, work skiff, 4 ton crane with 30’ boom, located Alaska, Sub I and T Price: $750,000

130’ ABS/USCG SUB I 1200 HP LANDING CRAFT (Ref#4147)

Built 1978, 134’ LOA / 121’ registered length x 32’ x 8.1’, 4’2” light mean draft, 7’ 3-3/8” loaded mean draft, main engines (2) Cat C18 diesels with Twin Disc MG-5202SC gears 3.48:1 ratio, 10+ knots cruising speed (34-40 gph), 289.67 tons deck cargo capacity, 72’ x 30’ clear deck, deck crane, 22,000 gal fuel capacity, 5400 gal water makers (1400 gpd), 1882 bbl tank currently used for oil spill recovery, (2) 99klw generators, may carry 22 persons on board, main house: 9 beds, galley, navigation and communication equipment, safety equipment, moon pool, current ABS USCG Sub 1, located West Coast US Price: $2,100,000
8 bed accommodation module available at extra cost
This landing craft could be converted to be used as an 1882 bbl oil tanker

69’ x 22’ x 9.4’ LANDING CRAFT (Ref#4116a)

75’ overall length, built 1953, rebuilt 1978 with ongoing upgrades, 730 hp, 5’ max draft, 57 L/T light ship displacement, 111.4 L/T max displacement, (2)Detroit 12V71N diesel engines, 9-11 knots approx. speed, 3000 gal fuel capacity, 100 gal potable water capacity, 120 gal hyd oil capacity, 120,000 lb cargo capacity, 14.5’ x 42’ cargo bay area, (2) RSW tanks, 74,000 lb total RSW capacity, 2-level aluminum deckhouse structure with u0pper pilot house, crew quarts, galley, 50 kw JD generator, 100kw Cat generator, Rexroth 40 gpm pump, (2) cranes, sewage system, last drydock 2020, port engine rebuilt 2020, starboard engine rebuit 2016, several available, located West Coast USA Price: $900,000 or make offer

119' X 34' X 5' (675 HP) LANDING CRAFT (Ref#3723)

Built 1955, US Army LCU, GT 186, NT 55, minimum freeboard 1’3”, max draft aft 5’3”, max draft forward 2’9”, last drydock 2016: spent $400,000 on steel work, (3) Detroit diesel 671 (225 hp each) with 2000 hours, 38 x 25” bronze 4-blade propellers, Magnum semi permanent generator 35 kw, dry type exhaust system, fuel capacity 13,300 gallons, potable water capacity 9,600 gallons, holds (6) 40’ containers and (6) 20’ containers double stacked, deck area 2,018 sq ft (main area), 200 tons deck cargo, raised wheelhouse contains engine monitor panel and manual style single lever throttle/reverse controls for each engine, mechanical steering, communication and navigation equipment. Single toilet and shower with flushing water, black and grey water received in a 50 gallon CHT tank. Break/recreation room and two bunk beds for crew rest. Crew head/shower/laundry. Small galley and mess room. Water cooled air conditioner and heating unit. Bow ramp 16’4” wide x 13’6” long, clearance to the ramp between the fo’c’s’le houses is 14’4”, ramp operated by a single electric hoist system with 5/8” wire rope. Located Florida. Recently reworked, $400,000 was spent on the boat, all new 5/16” steel was added to the bottom, boat was sandblasted and painted, shafts reworked, props reworked. Survey available from 2017. Exhaust on engine needs some work, damage to steel (from using excavator on barge) all above water line, bottom is in good shape. Located Florida. Price as is: $275,000

135’ x 30’ LCU LANDING CRAFT (Ref#3910)

Built 1972, US Military surplus used 800 hours, 200 ton capacity, 3.5’ bow draft, 5’ stern lightship, (2) Detroit 12V71 engines, (2) Detroit 371 generators, weight 75 tons, could be flagged foreign or US, excellent operating condition, two available, located Belize Price: $650,000 each

340 HP TWIN SCREW LANDING CRAFT (Ref#57)

Built 1944, Rebuilt 1982, 15.9m length x 4.3m breadth, 1.3m depth, 60,000 LB capacity, 28 GT, 15 NT, speed 15 knots, (2) diesel engines, 7.0 knots, steel construction, hull good, sitting a while, engines not started in 10 years and should be replaced, 671 Detroits (can be purchased for a low price), truckable, approx 14’W, located Ontario Canada but US built) Price: $75,000

610 HP TRUCKABLE TUG (Ref#4154)

Built 2024, new build, 25’ length, main engines: (2) Cummins QSB 6.7 305hp @ 2600 rpm, MD rating, peak torque 866 gt/lb @ 1700 rpm, Certification: IMO Tier II, EPA Tier III, Denso starting system, Twin Disk MG-5075SC gearboxes 2.88:1, 34” dia x 17” pitch propellers, 6 x 8.2 structural channel keel coolers, hydraulic steering system, 525 gallon fuel cell/transfer tank, pilot house 5’W x 5’6”L x 7’T (removable for trucking), truck cabin 9’W x 9’L x 6’T, (2) manual 5-ton deck winches, Flanking rudder 40 degree pivot angle, New build immediately available for sale with delivery December 2024. 30% deposit required to hold the tug Price: $420,000

300 HP TRUCKABLE TUG (Ref#4097)

Built 2004, 25’ x 12’ x 4’, lift weight 22,000 lbs, (2) John Deere 4045 engines, turbo charged, keel cooled. (2) Twin Disc MG-5061 reduction gears, alternator, Hydraulic and manual steering, 4 blade bronze propellers, 4’ x 4’ x7’ pilot house with 10’ eye level, upper pilot station with 18’ eye level, (4) spotlights, (2) deck cable winches, (2) VHF radios, GPS, chart plotter, engine displays. Price: $225,000

50’ MODEL HULL TUGBOAT (Ref#4082)

Built 1943, 46.4’ x 12’ x 5’, 12V71 main engine, Twin Disc MG512 3:1 reduction gears, Northern Lights 5kw generator A/C end wheelhouse, navigation and communication equipment, located Northeast US Price: $70,000

TRUCKABLE PUSHBOAT (Ref#4085)

30’6”L x 14’3 , Twin 671 Detroit engines, 32 props, 26 degree 2.5” shafts, 38,000 lbs, removable pilot house, unknown hours and year of manufacture, No COD, nice shape and runs well, very clean Price: $150,000

600 HP TWIN SCREW MODEL BOW TUGBOAT (Ref#4031c)

Built 1972, 65’ x 24’ x 7.9’, main engines: (2) Detroit 8V71 diesel engines, 8 knots cruising speed, 20 days fuel endurance, 10,000 gal fuel capacity, 1000 gal potable water capacity, (2) 20kw 271 Detroit generators, (2) 220V air compressors, upper pilot house with 32’ eye level, (2) wire rope facing winches, drydocked 2012, wheels, shafts and cutlasses renewed and boat fully painted, currently working Florida Price: $350,000

600 HP MODEL BOW LUGGER TUG (Ref#3915)

Built 1988, 68’ x 24’ x 8’, 5’ draft, 27’ visibility, 28’ x 14’ wood deck space, main engines (2) Cummins NTA 855M, 3” SS shaft, 44 X 26 wheels, 10 knots speed, (1) gm 371 30 KW generator, (1) gm 271 20 KW generator, 10,000 gal fuel capacity, 14,000 gal potable water capacity, 3 bunks, galley, bath, 2 crew, 87 gt, 69 nt, communication and navigation equipment, currently running, Sub M, located Louisiana Price: $625,000

700 HP TWIN SCREW TRUCKABLE TUG (Ref#4081)

Like new – keel laid 2015, completed 2020, , 25’9” x 24’, 6’6” depth, approx. 4’ draft, height of eye 17’10” (measured), heavy duty built, 22 NT, 28 GT, weight 127,000 lbs, (2) Cummins Mercruiser QSM11 diesel engines (built 2011), fresh water keel cooled, (2) 5-blade 47” diameter x 38” fixed pitch propellers, hydraulic steering system, (1) Stamford 30kw generator p/b Kubota V3300 diesel engine, (1) 8.5kw generators p/b Kubota D1005 diesel engine, 10’H above main deck x 22-1/2”W tow knees, 3450 gal fuel tank, 30 gal hydraulic oil steering tank, 750 gal potable water tank, 100 gal sewage treatment system, 1 head, navigation and communication equipment, alarm systems, safety and firefighting equipment, (2) Nabrico winches (port and starboard) single drum p/b7.5hp 60hz,3ph motor, located Alabama Price: $1,150,000

35’ TUG BOAT (Ref#4173)

Hull 2008 but not built up until 2021, no hours, 35’ x 19’, Cummins QSM11 Tier 3 diesel engine, Thrustmaster 360 degree Azimuth drive, 20kw genset, latest electronics, ready to work, located California Price: $875,000

700 HP PUSHBOAT (Ref#3481b)

Built 1970, 37’ x 16’ x 5’7”, 22’ eye level, 5’ light draft, 5.7’ loaded draft, main engines: (2) Detroit Series 60, Twin disc MG5114 reduction gears 3:1 ratio, (2) 40kw John Deere generators, electric/hydraulic steering, (2) main rudders, (2) 40 ton Nabrico electric winches, 4000 gallon fuel capacity, 1000 gallon water capacity, 55 gallon lube oil capacity, stateroom with (4) berths, galley, portable 50 lb fire suppression system, navigation and communication equipment, located Louisiana Price: $225,000

750 HP TWIN SCREW TUGBOAT (Ref#4061)

Built 1999, 52’ x 15’ x 7’, main engine (2) John Deere 6135 Tier III engines (approx. 2000 hours), Twin disc gears 5:1, 30” 4-blade propellers, flanking rudders, 3000 gal fuel capacity, 5 gal lube oil capacity, 35 GT, 44 NT, USCG Sub M COI, located Northeast US Price: $325,000

800 HP TRUCKABLE TUG (Ref#4111)

Manufactured 2013, 26.5’ x 14’ x 6’, (2) John Deere engines, flanking rudders, diesel fuel, located Florida Price: $300,000

800 HP TWIN SCREW PUSHBOAT (Ref#3263)

Built 1974. 55.5' x 22' x 8.1'. GT 66, NT 53. Main engines: (2) Detroit 12V71 diesels. TwinDisc MG 514C 6:1. Keel cooled. Fuel capacity: 8,500 gal. Water capacity: 1,500 gal. Full galley. Electronics, communication, navigation. Located Louisiana. Needs work. Price: $60,000

850 HP MODEL BOW TUG BOAT (Ref#3922)

Built 1980, Rebuilt 2015, 43’ x 16.4’ x 4.5’, 5.7’ depth, main engines (2) Cat 3406B with twin disc Red gears, 4-blade propellers 46 x 38, (2) Kubota 20 kw generators, 35 GT, 24 NT, 2500 gallon fuel tank, 2500 gallon fresh water capacity, 200 gallon lube oil capacity, push knee, galley, 2 bunks, current COI, Subchapter M, located New England Price: $290,000

850 HP TWIN SCREW TUGBOAT (Ref#4130)

Built 1932, 64’ x 27.4’ x 5.4’, approx. 6’ draft, main engines (2) Cat D353, fresh water cooled with keel coolers, Twin disc MG521 4.09:1 reduction gears, estimated speed 10 knots, 11,000 gal fuel capacity, 114 gal lube capacity, (2) SS 58” dia x 50” pitch 4-blade propellers, (2) 30 KW Delco generators p/b Detroit 371, (2) Nabrico 10-ton hydraulic towing winches, wheelhouse with single berth and half galley, navigation and communication equipment, Sub M, located Alabama Price: $375,000

900 HP TWIN SCREW LUGGER TUG (Ref#4053)

Built 1980, 53’ x 22’, 6’ draft, 20’ eye level, main engines (2) 8V92HRS GM diesels, Twin disc gears 4:1 ratio, 30 kw generators p/b (2) GM371 engines, 10 knots speed, 28 gph fuel consumption, push knees, 81 GT, 55 NT, 7500 gal fuel capacity, 10,000 gal potable water capacity, 30LT deck capacity, 3 berths, laid up, located US Gulf Price: $440,000

900 HP TWIN SCREW TUGBOAT (Ref#4031b)

Built 1966, 66’ x 22.1’ x 7.6’, main engines (2) Detroit 12V71 diesels, 5.16:1 gear ratio, 9 knots cruising speed, 20 day fuel endurance, (2) 30kw Delco generators, (2) 220V air compressors, 15,000 gal fuel capacity, 5000 gal potable water capacity, Capstan aft, facing winches, extensive steel work replaced topside, new watertight doors, electric wiring replaced, main engines rebuilt, recently drydock (spent $220,000), Sub M, COI, located Florida Price: $550,000

900 HP TWIN SCREW TUGBOAT (Ref#3322)

Built 1966, 55.6' x 19' x 7.5', 5.5' to 6.5'. GT 81, NT 55. Elevated pilot house. Total height: 38', eye level 28'. Main engines: (2) Cummins (twin 450 hp) with TwinDisc 4.59:1. Wheel: 48x44. Auxiliary: (2) Cummins Onan. Capacities: fuel 6,000 gal, water 5,000 gal. Lube oil 100 gal. Electronics, navigation, communication. Steel work drydock November 2020, Subchapter M. Located Louisiana. Price: $625,000

1000 HP TUG BOAT (Ref#3996)

Built 1978, 63’ x 19’6” x 8’, Sub M Compliant, COI Oceans, main engines (2) Detroit 12V71 diesels (engine built 1989), Twin Disc 514 4.5:1 gear ratio, 3’6” Aquamet shaft, 58 x 39 3-blade propellor, hydraulic steering, (2) 13 kw Lister aux engines, 4700 gallon fuel capacity, 600’ x 2” towing Hawser, 300’ x 1-3/4” intermediate hawser, 55 gallon hot water tank, electric heat, 4 berths, galley, safety equipment, communication and navigation equipment, new stainless steel exhaust system, pilot house deck and galley deck replaced with stainless steel, new stainless steel frame work and deck over 20% of bottom, replaced lower engine room bulkhead water tight door, hand rails and deck house edges replaced with stainless steel, mast and engine room vents replaced, vessel well maintained, ready to work, located New England Price: $760,000

1200 HP TWIN SCREW TUGBOAT (Ref#3395)

Built 1979. 59'8" x 20', draft 7'3". GRT 81, NRT 55. Main engines: (2) Cummins QSK19 Tier II. Reduction: TwinDisc 4.50:1. Generator: Isuzu 4LE2 21kw. (2) 3-blade fixed pitch propellers, installed 2012. 4" stainless steel shafts. Fuel capacity: 10,500 gal. Hydraulic fluid 600 gal. Hydraulic winch: Nor-Crane with 1500' of 1 1/4" line. Tow bridle: 7/8 x 31 wire rope sling * 6 by 9 class. Sub M compliant, ready to work. Located West Coast USA. Price: $725,000

1200 HP TWIN SCREW TUGBOAT (Ref#3502)

Built 1989, rebuilt 2002. 78' x 24' x 9.5'. Min draft 7.4', max draft 8.8'. 34' eye level. Main engines: (2) Cummins KTA19M, Reintjes Waf 364 6:1 reduction gears, 5" stainless steel shafts, 63" x 67" stainless steel props in kort nozzles. Aux engines: (2) 40KW with 4-71 Detroit diesels. Tow winch: Seahorse 50. 1500' of 1 1/2" line. Capacities: Fuel 21,000 gal, potable water 7,000 gal, lubricants 500 gal, quarters 2-man bunkroom. Electronics, navigation, communication. Located US Gulf Price: $1,050,000

1100 HP TWIN SCREW TUGBOAT (Ref#2595)

Built 1967, 61.5’ x 22’ x 9.1’, 18’ eye height, 35’ air draft, main engines: (2) Cat 3408, Twin Disc reduction gears, 7.5:1 ratio, located East Coast US Price: $575,000

1400 HP TWIN SCREW TUG BOAT (Ref#4031a)

67.5’ x 24’ x 11.8’, main engines (2) Cat 379 diesel engine, 4.34”1 gear ratio, 10 knots cruising speed, 20 days fuel endurance, 25,000 gal fuel capacity, 4000 gal potable water capacity, (2) 90kw generators p/b Cat D330, (2) electric motor driven air compressors, steering consoles in pilot house and aft on second deck, SMATCO 44-HATS-100 50hp electric motor driven hydraulic single drum towing winch with 1600’ of 1-1/4” tow cable, (2) facing winches, communication and navigation equipment, last drydocked 2011, SOLAS equipped for 50+ miles offshore, has not worked since 2021, located Florida Price: $650,000

1500 HP TWIN SCREW TUGBOAT (Ref#4071a)

Built 1977, 70’ x 24’ x 10.5’, 7.5’ light draft, 8.5’ max draft, main engines (2) Gauscor 2F 240TA, ZF3200 gears 5:1, 4 blade SS props 64” x 46”, (2) 30 kw generators Detroit 371, electric/hydraulic steering (2 stations), 10 knots light speed, 1200 gpd fuel consumption, 15.5 ton bollard pull, Smatco 44D winch w/2000’ of 1-1/4” tow line, 300’ of 8” shock line, 18,000 gal fuel oil capacity, 450 gal lube oil capacity, 1,800 gal potable water capacity, 3000 gal wash water capacity, 99 GRT, 79 NT, 6 berths, galley, Axy/Acet, fuel transfer, external air start, safety equipment, navigation and communication equipment. Tug has passed her annual inspections so far and will have her internal structure and drydock inspection once it is in the water and can go up on the drydock. Located US Gulf Price: $1,050,000

1500 HP TWIN SCREW TUGBOAT (Ref#4071b)

Built 1972, 100’ x 25’ x 12’, 6’ light draft, 10’ max draft, main engines (2) Gauscor SF 240TA, R350 gears 4:1 ratio, 4 blade SS props 54” x 51”, (2) 30 kw generators Detroit 371, electric/hydraulic steering (2 stations), 10 knots light speed, 1200 gpd fuel consumption, 10 tons bollard bull, Seahorse DS-50 winch w/1300’ of 1-1/4” tow line, 300’ of 8” shock line, 27,000 gal fuel capacity, 250 gal lube capacity, 7500 gal potable water capacity, 19,500 gal ballast water capacity, 76 GRT, 51 NT, 8 berths, galley, fuel transfer, external air start, safety equipment, navigation and communication equipment. Tug passed her internal structure and drydock inspection. New Yanmar gears and engines will be installed. Once back in water will have annual inspection, passed all annual inspections so far. located US Gulf, located US Gulf Price: $1,450,000

1500 HP TWIN SCREW TUG (Ref#1853)

Built 1981, 65’ x 26’ x 10’, 5.6” light draft, 7.6” maximum draft, main engines: (2) Yanmar 6AYAM-6ET 1500 bhp Tier 3, Yanmar YXH240L reduction gears 5:1 ratio, 4 blade SS props with nozzles, electric/hydraulic steering, (2) 40kw generators with Kobota tier 3, 17 ton bollard pull, Speed 10 knots, 1000 – 15000 gpd fuel consumption, 23,000 gal fuel capacity, 50 gal lube oil capacity, 7,000 gal potable water capacity, 3,500 ballast water capacity, 60 Ton Nabrico winch with 1.25” x 1300’ main tow line, 300’ x 8” shock line, Smatco 55D towing winch, 6 berths, galley, Oxy/Acet, fuel transfer, external air start, Sub M compliant, Solas Approved, located East Coast US Price: $1,250,000

1530 HP TWIN SCREW TUGBOAT (Ref#4177)

Built 1966, Rebuilt 2009, 90’ x 28’ x 9.5’, main engines: (2) Cat D398 diesel engine, 6.31:1 reduction gear ratio, (2) 75 kw generators powered by Cat D320 diesel engines, 4500 gal potable water capacity, 34,000 gal fuel capacity, located Caribbean, US Flag, current COI expired March 2026 Price: $1,550,000

1500 HP TWIN SCREW TUGBOAT (Ref#4158)

Built 1976, 75’ x 25’ x 9.5’ depth, 8.5’ max draft, 20’ x 24’ deck space, main engines: GM 12V149NA (750 hp each), Twin disc MG540 reduction gears, (2) 40kw GM 371 generators, 10 knots speed, steering electric over hydraulic, 68” x 54” wheels, 22,000 gal fuel oil capacity, 450 lube oil capacity, 5000 gal potable water capacity, Smatco 48-DPS towing gear 65,000 lb line pull single drum split, 3 staterooms, 5 berths, galley, navigation and communication equipment Price: $950,000

2000 HP SINGLE SCREW TUGBOAT (Ref#4132)

Manufactured 1961, 105’ x29’ x 16.3’ depth, 22’ eye height, main engine: Fairbanks Morse 38D 10 cylinder (retrofitted and upgraded), 12’ x 4 blade right hand propeller with 12” bore, Lufkin reduction gears 57.2:1, 29,000 gallon fuel capacity, 2,500 gal water capacity, 50,000 lb bollard pull, H75M winch, 8 berths, 4 staterooms, navigation and communication equipment, current COI, located Northeast USA Price: $550,000

2000 HP PUSHBOAT (Ref#4025a)

Built 1976, rebuilt 1992, rebuilt 2015, 70’ x 24’, main engines: (2) Cat C32, Fabick reduction gears 6:1 ratio, stainless steel shafts and propellers, cutlass bearings, John Deere generators, Murphy engine alarms, hydraulic steering system, 16000 gal fuel capacity, Wintech 40 ton winches with 7/8 wire, galley, communication and navigation equipment, Edwards E-FSC fire panel, located Midwest Price: $1,900,000

2210 HP TWIN SCREW TUG (Ref#4094a)

Built 1980, 73.3’ x 26.3’ x 11.4’, 8.5’ min draft, 11’ max draft, 26.2’ min height, 46.5’ max height, main engines: (2) Cat D398, (2) Cat 7261 reduction gears 4.61”1 ratio, 4 blade 76” x 76” Coolidge propellers, twin screw fixed kort, flanking rudder, 52,800 lb ahead bollard pull, 30,800 lbs astern bollard pull, (2) 50 kw GM 471 Detroit generators w/hyd pump, 25,450 gal fuel capacity, 453 gal hydraulic oil capacity, 384 gal lube oil capacity, 3,283 gal water capacity, 1500 lb anchor gear, Bow winch, Intercon SD150 single drum tow winch, located California, (cannot be used in California due to trade restrictions placed by owner) Price: $550,000

3000 HP MODEL BOW TUGBOAT (Ref#4077)

Built 1982, repowered 2000, 75’ x 25’ x 10’, main engines: (2) Cat 3412C engines, kort nozzles, 40,000 gal fuel capacity, (2) 40 kw generators, 11,500 gal potable water, 22’ eye level, 9’ draft, Smatco 48K-DAD-75 double drum capstans side by side93 GT, 63 NT, located Louisiana Price: $1,050,000

3000 HP TWIN SCREW TUGBOAT (Ref#4092)

Built 1998, 95’ x 32’ x 13.7’ hull depth, eye height 28’, main engines (2) Cat 3516, Twin Disc MG5600 gears 5.04”1 ratio, (2) SS 4-blade 83” props, kort nozzles, (2) 75kw Cat 3306 generators, 90T McElroy DFT65-D double drum winch p/b Cat 3306, Nordic towing pins, Laid up (drydocking due 2022), located South USA Price on Request

3000 HP TUGBOAT (Ref#3960)

Built 1982, 90’ x 28’ x 12’ max draft, main engines (2) Cat 3512 (1500 hp each), Twin disc reduction gears MG540 6.18:1, 10 knots speed, Generators (1) 65 kw and (1) 50 kw, 72” x 73” wheels, kort nozzles, Smatco waterfall winch w/1800’ of 1-3/4” and 1900’ of 1-1/2” tow wire, 40,000 gal fuel oil capacity, 600 gal lube oil capacity, 10,000 gal potable water capacity, communication and navigation equipment, 4 staterooms, 7 berths, galley, A/C and heat, 96GT, 75 NT, ABS loadline Price: $1,850,000

3000 HP TWIN SCREW TUG (Ref#4175)

Built 1972, 107’ x 31’ x 17’2” depth, 14’3” loaded draft, 12’4” light draft, main engines (2) EMD 12-645E2, (2) 74 kw Detroit 671 generators, 2900 gpd (162 gph) fuel consumption, 53,800 gallon fuel capacity, 5000 gallon potable water capacity, accommodations for 12 men, eye height 23’ @ 12’ fwd/15’ aft, no tow winch, 1 Markey captain on stern, located East Coast Price on Request

3000 HP TWIN SCREW TUG (Ref#4023b)

Built 1970, 119’ x 31’ x 13.5’, main engines (2) EMC 12-645, Falk 1235 RM reductions gears, (2) John Deere 6068 110 kw generators, 66,000 lbs bollard pull, Markey TDSD 32 tow winch, port drum 2” x 2200’, stbd drum 2” x 2200’, 96,000 gallon fuel capacity, 1700 gallons lube oil capacity, 3000 gallons fresh water capacity, 177 GT, 120 NT, ABS loadline, located West Coast USA Price: $550,000

3500 HP TWIN SCREW TUG BOAT (Ref#4178)

Built 1977, 110’ x 32’ x 14’, 12’9-5/8” loaded draft, eye height: P/H 28’ @ 10’ fwd/11’3” aft, main engines: (2) Alco 12-251C diesels (approx 29,200 hours on each engine), (1) generators 100 kw Detroit 8V71 and Detroit 6V71, 80,000 gal fuel capacity, 5400 gal potable water capacity, accommodations for 11, no tow winch, located US Gulf Coast Price: $550,000

3900 BHP TUG (Ref#4011)

Built 1976, 133' x 34', 198 GRT, 135 NRT, main engines: (2) EMD 16-645-E6, Reinjes WAV2600 gears 4.45:1 ratio, 62 ton bollard pull, (2) 4-blade props, generators: (2) 99kw Detroit 8V71 each, Intercon primary tow winch holds 2000' of 2-1/4" wire, Intercon secondary tow winch holds 2000' tow wire, upper pilot house, 64' eye level, 129,600 gal fuel capacity, 1500 gal lube capacity, ABS expired 2023, last worked 5/2023, tug has push pins in it for oil barges, in the past several million dollars was spent on the boat which included modifying the engines for eco-system to burn less fuel and less oil, at 600 rpm it bvurns 1200 gpd at 10 knots, at 850 rpm it burns 2600 gpd, tower and pilot house are aluminum, A/C and heat work excellent, located Florida Price: $ 550,000

3900 HP TUG (Ref#3986)

Built 1970, 115 x 31 x 14196 GT, 133 NT, main engines: (2) EMD diesels, laid up since 2020, (2) 100 kw generators, 50,000 gallon fuel capacity, located New York Price: $625,000

4000 HP TWIN SCREW TUG BOAT (Ref#4181)

Built 1945, Repowered 1975, 1984 added ice strengthened hull, 1977 overhauled and converted main engines to 16-645, 2010 overhauled main engines. 148.5’ x 33.1’ x 16’, main engines: (2) EMD 16-645C, (2) Western Gear Reverse gear box 4:1 reduction gears, (2) 100 kw Detroit 671 generators, keel cooling: main engines, generators and gear box – Fernstrum grid coolers. (2) 108” x 86” fixed pitch four blade propellers SS open wheel, (2) electric motors over hydraulic pumps (2) steering rudders, 12.6 knots speed, approx 92,000 gallon fuel capacity, 3000 gal fresh water capacity, 1500 lube oil capacity, 300 gal gear oil capacity, 3400 gal slop oil capacity, Microphor treatment sewage plant with holding tank, 45245 gal ballast capacity, (4) single staterooms, (3) double staterooms, full galley, Almon Johnson single drum towing winch (1600’ of 2” cable) p/b Detroit 471 diesel, (2) Beebe 64L-RC face (bow) winches with 1” wire, Horsburcht Scott windless p/b GE electric motor, communication and navigation equipment, drydocked 2023/2024, located Midwest US Price: $850,000

4370 HP MODEL BOW TWIN SCREW TUG (Ref#4030)

Built 1970, 118’ x 33’ x 18’5”, 46’ eye height, main engines: (2) Alco 251C-12, (2) 99kw Detroit 8V71N generators, Falk reduction gears 6.7:1, 132” x 95” wheel size, 196 GT, 133 NT, 72,900 gal fuel capacity, 1000 gal lube oil capacity, 1795 gal waste oil capacity, 4000 gal water capacity, double drum Skagit winch /2700’ of 2” wire, current COI, ABS, located East Coast US Price: $$2,250,000

4600 HP TWIN SCREW TUG BOAT (Ref#3871)

Built 1973, 109’ x 32’ x 17’, 296 GT, 201 NT, main engines (2) EMD 12-645-E5 12-cylinder diesel engines, bronze fixed itch propellers, located New England Price: $275,000

5000 HP TWIN SCREW TUG BOAT (Ref#4037)

Built 19067, 121’ x 32’ x 10.9’, 15.5’ loaded draft, 12.5’ light draft, main engines (2) Fairbanks Morse 12-38D 8-1/8, 5-lade SS 115” x 81” propellers, Philadelphia 28 HRMGH 4.09:1 reduction gears, (2) 99 kw 108V John Deere 9098TA/Detroit 671 generators, 73,000 gal fuel oil capacity, 990 gal lube oil capacity, 7600 gal potable water capacity, 15000 gal ballast capacity, 13 knots lt speed, 70 gal/per hour, Burrand hydraulic SD towing winch 110,000 lb of line pull 2800’ of 2-1/4” cable, fire stations, located Caribbean, current certification Price: $750,000

4750 HP TWIN SCREW TUGBOAT (Ref#4125)

Built 2011, 10,000 HP oil industry rated class, 116’ x 34’ x 17’, main engines: Cat 3516DITA High Displacement (2364 hp each), 73.65 ST calculated bollard pull w/propellers for efficient towing speed of 7 knots, 85.80 ST w/propellers for efficient towing speed of 4 knots, Reintjes WAF 1173 reduction gears, Markey TDSD-24 double drum towing winch with 2-1/4” wire rop, Cat C6.6 winch engine with multi speed Funk transmission and torque converter, 99kw John Deere generators, 120,000 gal fuel capacity, located US Gulf Price: $6,500,000

5000 HP TUG (Ref#4009)

Built 2002, 90' x 40' x 16' (12' light draft), 98 GT, 66 NRT, main engines (3) Mitsubishi S12R-Y2MPTK Tier II (new 2013), 55 ton bollad pull, (3) Ice Class C props in kort nozzles, (3) ZF gears 6.9:1 ratio, (4) gen sets (1) 99kw JD, (1) 99kw Iveco, (1) 99kw GM671, (1) 40kw JD, Almon Johnson primary tow winch holds 2200' of 2-1/4" wire, secondary tow winch holds 1700' of 2-1/4 wire, 6' diameter x 8' long stern roller able to deck a 15 ton aqnchor, (1) 2 ton HIAB marine crane, 2 ton tugger to move rigging in place, bridles chain and wire, surge chain, portable running lights, pusher gear, 3000 lb anchor with 7 shots of 1-1/4" chain, upper pilot house, 42' eye level, 80,000 gal fuel capacity, 1000 gal lube oil capacity, 6000 gal potable water capacity, in drydock being reworked, COI, Sub M Price: $1,600,000

Click Here for Additional Push Boats

60’ x 28’ LIFT BOAT (Ref#4200)

28' x 60' x 6'-10", 4’10” hull draft", 6’ Safety Factored Draft, 7’ Air Gap, (3) 61'-6" Legs w/8" x 18" Pads, 60,000# Deck Load Capacity, (2) GM 8V92 Detroit diesel engines (300 hp), twin screw, (2) Detroit 271 30kw generators, (2) Quincy F350 air compressors, 40’ max water depth, 50 kt wind speed, 5’ wave height. Jacking Specifications: 10’min max jacking speed, 25 kt wind speed, 5’ wave height. Transit 60 kt wind speed, 5’ wave height. EBI C20 10-ton crane 55’, 14’ x 24’ cabin, sleeps 6, galley, head, documented, located Louisiana Price: $550,000

180’ X 50’ BARGE WITH 4 LEVEL DECKHOUSE (Ref#4183)

Built 1974, 180’ x 50’ x 10.6’, 4 level deckhouse extends full width and breadth of the vessel, solid bulwarks on each level, 40,000 SQ FT cabin space, barge is non propelled. (2) 8V71 Detroit diesel engines powers 150 kw AC generator and (1) 371 Detroit diesel drives 50 kw AV generator. Electrically driven bilge and fire pumps, 1000 gal fuel oil tank. Former COI for river service for 900 persons. Level #1 (main deck) fully enclosed with mooring and anchor handling area forward, deckhouse with wide side deck, large open aft deck with (2) engine casing and ramp centerline aft for portable gangway. Level#2 (upper level), former seating area with windows, escape trunk from mooring and anchor handling space below. House structure running to stern, at the amidships area (port and starboard) wide side decks are the main passenger access systems with a section of the deck which is hinged and can be raised and lowered to the main deck. Level #3 (observation deck) is open area with awning structure forward, house structure with A/C, wide side decks outside of the house. Level #4 (bridge deck), only non-full length deck starting 75’ from bow and running to amid ship, fitted with faux pilothouse and stack structure. Barge was used as a floating hospital. It was drydocked in 2010 and received commercial blast and 3 coat paint system, outfitted with 75 new 23# zinc anodes, new sea and overboard valves, plate and frame renewal in generator room space, given USCG dry dock certificate. Vessel has remained in fresh water since drydock. Located New York Price: $550,000

136’ x 8’ x 7.5’ DOCK BARGE (Ref#4194d)

With spuds, located US East Coast Price: $70,000

120’ x 50’ x 10’ SPUD BARGE (Ref#4194b)

25” x 60’ spuds, located East Cost US Price: $225,000

90’ x 30’ x 10’ DOCK BARGE (Ref#4194c)

Located East Coast US Price: $110,000

60’ X 20’ X 6’ FLAT DECK BARGE (Ref#4194a)

Located East Coast US Price: $70,000

40’ X 10’ X 5’ SECTIONAL BARGES (Ref#4180)

(PHOTOS OF PREVIOUS BUILDS)

New Build, terms 50% deposit with order, completion time 4-6 weeks, Canada Price: $36,000 USD each
12” x 12” spud well $6,000 USD each, 12” x 12” spuds $130 USD per foot

35’ x 12’6” x 42” SPUD BARGE (Ref#4195a)

Good condition, Located Texas Price: $50,000

35’ x 12’6” x 36” DECK BARGE (Ref#4195b)

A-frame (not shown in picture), good condition, located Texas Price: $50,000

19’ x 7’ x 3’ FLEXIFLOAT BARGES (Ref#4159)

8 available in the water and must be removed at buyers expense), 2 have small holes otherwise in relatively good shape, located Georgia (100 miles north of Jacksonville, FL) Bargain Price for all 8 barges: $45,000

300’ x 90’ x 22’ FLAT DECK BARGE (Ref#4004)

Built 1965, steel, partly welded/partly riveted, racked bow and transom stern, 21 compartments, fitted with arrangements for 4 spud poles, in order to hold rock deck needs to be reinforced where ringer crane was not mounted, 3000’ of deck area needs work, 1000 lb/sq ft deck capacity, located East Coast US PRICE $925,000

250' x 60' x 11’ CRANE BARGE WITH AMERICAN 9520 (220 ton capacity) CRANE (Ref#3651)

250’ x 60’ x 11’. GT 1694. Raked bow. American 9520 originally truck crane, now permanently mounted on the barge with steel support approx' 5' high, 180' boom. (4) spud wells, (2) 26" spuds. Barge capacity 4000 tons. Air conditioned resting cabin and tool room. Documented by not COI. Located Northeast US. Price: $600,000

200’ X 40’ X 7’ DECK BARGE (Ref#4075)

Built 2008, 200’ x 40’ x 7’ deck barge, big rub rail down both sides, only used in fresh water, excavator removed, located Midwest USA Price: $1,100,000

250’ x 52.5’ x 12’ HOPPER BARGES (Ref#3912ab)

Two available. Can load up to 10’ draft, 3300 tons, located fresh water, Bulkheads #1, 2 and 3 replaced, price includes delivery to NY Harbor Price: $125,000 each

195’ x 35’ HOPPER BARGES (Ref#4196)

Three available, 1800 ton, located in Louisiana Price: $250,000 each

195’ x 35’ FLAT DECK BARGE WITH BIN WALLS (Ref#4168a)

(4) available, 1600 ton, used as rock barges, built approx. 1975, located Midwest US Price: $250,000 each Price for all 4 barges: $850,000

195’ x 35’ HOPPER BARGES (Ref#4156a) 4 available, built 1975, 1600 ton capacity each, 3’ coming, located Arkansas Price: $280,000 each

Available with (prefers to sell as package):
1400 HP PUSHBOAT (Ref#4156b) Built 1953, 79’ x 26’, Cummins K19 engines, 2 generators, 3 decks, accommodations for 5 persons, galley, shower/head, 3 decks, Sub M compliant, located Arkansas Price: $775,000

185’ X 45’ X 12’ KEYWAY BARGE (Ref#4044)

Built 1985, keyway filled in, raked one end, approx. 3000 ton, just came off a job in August 2023, although paint is peeling steel is good, tanks are good, located Louisiana Price: $675,000

165’ x 45’ DECK BARGE WITH RAMP (Ref#4035_barge)

165’ X 45’ X 9.5’ depth, 3.5’ draft, 20’ x 45’ stern mounted ramp, 1000 ton capacity, 6” concrete wear deck, welded steel flat deck freight barge (converted from tank barge), raked ends, 609 NT, 609 GT, Skagit single drum anchor winch, (2) Gearmatic 25,000# hydraulic able winches for loading ramp, 671 Detroit driving Spencer 35 gpm hydraulic pump, 50 gal fuel tank, not ABS classed, does not carry a loadline certificate or current COI. Price: $525,000

160’ x 59’ CRANE BARGE WITH MANITOWOC 4600 CRANE (Ref#4045)

Barge built 1986, 806 GT, 9’ height, nine transverse bulkheads and three longitudinal bulkheads. Manitowoc 4600 S3 crane with Vicon, built 1974, twin engine design with Cummins K19 front engine and Cummins 855 rear engine (needs new gear for boom hoist). Reduced for quick sale. Price for barge and crane: $450,000

165’ BARGE AND TUG PACKAGE (Ref#4035)

165’ x 45’ DECK BARGE WITH RAMP 20’ x 45’ ramp, 1000 ton capacity, concrete wear deck
850 HP TWIN SCREW TUG Built 1966, 65’ x 21’ x 10’, main engine 850 hp Cat, 88” x 109” SS propellers, 89” kort nozzles, Foss bow winch, 1500’ 2” tow wire on tow winch, 16,000 gal fuel capacity #2 diesel, 3800 gal potable water capacity, 87 GRT, 57 NRT, communication and navigation equipment, Sub M
Located Alaska
Price for barge and tug: $775,000

134’ x 50’ x 12’ FLAT DECK BARGE (Ref#4093)

(2) 30” spud wells starboard, no spuds, located New York Price: $475,000

120’ x 30’ x 7’ SHALLOW DRAFT WORK SPUD BARGE (Ref#4121)

Built 2012, 3’ normal draft, 70’ X 30’ deck area, 190 GT, 15,000 gal water capacity, 9,500 gal fuel capacity, 60 gal lube oil capacity, passenger and crew accommodations for 20 with (4) 4-bunk state room and (1) 4 bunk company room, communication and navigation equipment, 40 Ton Natulatis Hydraulic crane with 60’ boom, (2) 40kw Isuzu generators, not a self propelled barge, located Louisiana Price: $1,000,000

120’ x 30’ x 7 BARGE WITH BIN WALLS (Ref#4190)

Built 1980, 4’ bin walls, spuds and spud wells, John Deere engine powers the spuds and 20’ hydraulic ramp. Currently in shipyard being sandblasted and painted, new lower chine knuckles on it Price: $210,000

110’ X 56’ X 13’ FLAT DECK BARGE (Ref#3983)

Price: $690,000

77’ x 21.5’ X 5' SECTIONAL BARGE WITH RAMP (Ref#4001)

(16) sections 21’4” x 5’ wide, bolts together from top, hard coat painted with heavy duty US Army paint (good for 25 years), clean condition, ready for use, located Louisiana Price: $110,000

75’ x 26’ x 4’ FLAT DECK SPUD BARGE (Ref#4136b)

2 spuds, Detroit diesel to power spuds, located Midwest USA (excavator availble at extra cost) Price: $195,000

60’ x 28’ x 5’ BARGE (Ref#4189a)

Two 60’ x 14’ flat deck barges that connect together to make a 60’ x 28’, built 2012, connects together with 1-3/4” pins, fresh zincs, good paint, 6 tank barge (5 tanks excellent, 1 tank slight pitting), (2) 40’ x 10” dia spuds mechanically operated, holds in excess of 100,000 lbs, 6 new hatches, currently on small job in Connecticut, available for immediate sale Price: $135,000

Available at same location:
560 HP MILITARY TRUCKABLE TUG (Ref#4189b)

26’ x 8’, Jet drive, runs but needs some wiring Price: $50,000

50’ X 20’ X 4’ FLAT DECK SPUD BARGE WITH KOEHRING 7 TON CRANE AND BOAT (Ref#4091)

50’ x 20’ x 4’ Flat deck barge with (2) spuds (30’ and 25’), hand winch for spuds
2005 Koehring 7-ton crane with Detroit engine, ¾ yard bucket
33’ x 10’ x 5’ steel boat with Detroit 471 engine, (2) 400 gal fuel tanks, controls, pilot house
Located Michigan
Package Price: $48,000

(2) 40’ x 16’ x 4’ SECTIONAL BARGES (Ref#3634b)

2 spuds (12” x 20’ each), pulling out of water and will be sandblasted and painted, located Alabama Price: $100,000 for both

25’ x 10’ x 4’ MUD BARGE (Ref#4089a)

Built 2013, inside dims 23’ x 8’ x 3.5’, good shape, 4 compartments for floatation, located Wisconsin Price: $35,000

(2) 48’ x 12’ x 4’ BARGES (Ref#4112)

With (2) spuds, one raked end Price for quick sale Price: $90,000 (this price is valid until February 5, 2024)

FLEXIFLOAT H50 SECTIONAL BARGES (Ref#4129)

5 available 7.5’ x 30’, rounded ends, (2) 15” spud wells welded on, spuds (2) 35’ x 13”, (2) 20’ x 13”, (five barges configure to 37.5’ x 30’) Price: $100,000

40’ x 10’8” TRUCKABLE BARGE (Ref#3993)

(two paired up in photo)

4’8” deep, weight 23,500 lbs, outside shell with two internal bulkhead, ¼” plate pins together with 2” solid pins, four pad eyes on each barge with two pinning spots, frame work consists of 6” channel on deck with 5” channel on bottom and 2” x 3” x ¼” diagonals. Bottom longs and deck longs are 2” x 3” x ¼” angle. Stern 2” x 3” x ¼” angle with 5” channel supports uprights. Two hatch covers on deck with a hatch door through the rake bulkhead. Epoxy one coat on inside and two coats on outside, six anoids on each barge, four d rings for lifting purposes while empty. Price: $70,000 each

80,000 BBL TANK BARGE (Ref#4165)

Built 1979, structurally modified 2007 to double hull, 400’ x 72’ x 22.9’ draft, a design depth of 28.8’, maximum deadweight of 13,575 MT at 23 feet draft; Gross Tonnage of 6,376, a Net Tonnage of 3,957, summer draft 7, 01 Meters (23’). double hull design, fuel oil storage tank area, (2) main generators, (2) John Deere Model 6816 195kw, two sets of 10,000,000 BTU heaters, vapor heats (hot oil system), p/b MGO/marine diesels and air from the compressors generators hot oil that is sent through a main line to the heater coils located in the cargo tanks, (2) Cat C18 cargo pumps, accommodations for 6 crew members (3 cabins), galley. (2) deck cranes SWL 20 ton capacity. Located Caribbean Price to be Determined

30,000 BBL TANK BARGE (Ref#4148)

290’ x 54’ x 12’, double hull, built 1976, 1 pump with Detroit 671, building contains a generator with 471 Detroit that powered electric heating system for piping, several pumps for discharge, 36” x 36 x 90’ spud in front (does not affect tanks), currently being used as a loading platform and not as a tank barge, tanks are very clean and have not been used for oil for 15 years, located Midwest US on the Mississippi River Price: $375,000

LOW DRAFT MOTOR TANKER (Ref#4080)

Built 1961 (Germany), 84m x9m x2.67m draft (fixed point 4.5 m without ballast), Class: BV, valid until 06/2026, single hull, loading capacity 1349 t at 2.67m draft, 6 tanks equipped with spirals and coating,1773 cbm at 100%, Load/Unload Pump: 1x 432 cbm/h hydraulic, 1x Borneman 125 cbm/h electric.
Mitsubishi (S12R MPTK) with 1200 Hp at 1600 Rpm, Built in 2004, Bow Thruster: 220 Hp, DAF, 2x 80 KvA MWM & 1x 32 KvA Hatz generators, complete navigation. Aluminum wheelhouse installed in 2020, living and sleeping areas renovated in 2004. AC installed in 2020. Price: 445,000 Euro

542 TON COASTAL BUNKERING TANKER (Ref#3759)

Built 1962 (Germany), 48.82m L x 8.17m W, 2.60m max draft, 542 (600m3) tonnage, 6.25m height without ballast, 6 tanks, 440 hp Cummins main engine, Van Tiem DAF 1160 bow thruster, (2) Hatz 35 kva generators, (2) BHF, radar, AIS, GPS Sonar, Car pilot, etc., bunkerboom, (2) bedrooms, bathroom, kitchen, lounge, CVO Rhine 2025 Certificate, AND 2024 Certificate, located Europe Price: €270,000 Euros

9000 BBL SINGLE HULL TANKER (Ref#3843)

Built 1965, 190’ x 34’ x 14’9”, 982 GT, 1500 hp engine (installed 2012) EMD 645 diesel, gears Scania Voda 3:1, CPP propeller, Cat C9 generator, Cat 3116 emergency generator, (2) 3406 cargo pumps, used for bunker (bottom not cleaned or degassed), used in fresh water only, 1282t DWT, located Ontario, Canada, Candian flat (no classification) Price: $250,000 USD

13,250 BBL DOUBLE HULL TANKER (Ref#3353a)

Built 1968. Classification: MSI. Last drydock: January 2017. Last annual survey: March 2018. Loadline valid until 2022. 172.5' x 34.4' x 16'. GRT 822, NRT 580. Summer DWT 1587, Summer draft 16'. Main engine: Cat 3412 536HP (Built 2000). Pumps: Screw type: 2 F.O + 1 D.O, (1) 300m3/hr, (1) 200m3/hr for fuel. (1) 180m3/hr for diesel. Cargo capacity: 26 cargo tanks, total capacity 13250bbl. Located Greece. Price: 400,000 EUR

6300 HP 160' CARGO / PROJECT SUPPORT VESSEL (Ref#4115)

Built 2002, converted from crew/supply boat to handle cargo and project support operations and designed to operate in remote areas. 160’ x 29’ x 14’, 5.75’ light draft, 9.25’ max draft, 42’ air draft, 165.4LT light ship displacement, 490lt max displacement, 220 LT deck cargo capacity, 100’ x 25’ clear deck, main engines: (4) Cat 3512B, (4) ZF4600 gears 2.52:1 ratio, 5-blade 50 x 50 propellers, Cat 3306 blow thrusters with 125 hp key power, (2) 75 kw generators Cummins 6BT122-1800, 1000 gpm fire monitor, 25 knots speed light boat, 21 knots speed loaded, 35,380 gal fuel capacity, 50,800 gal potable water capacity, 828 gal ships potable, 160 gal lube oil capacity, 1455 gal dirty oil/bilge water capacity, 7010 gal rig water capacity, 988 gal sewage capacity, 539 gal grey water holding tank capacity, 3000 GPD water maker, sewage purification system, Solas electronic system, laundry, galley, 7 2-man staterooms, 3 heads, on main deck a new galley was added and crew boat seats removed. Davit retrieval system, (2) 150 lb anchors, (2) 60-man life rafts, crane and 2 containers will be removed (not included). ABS (valid until 2027), US flag, located USA, invested $2M Price: $1,150,000

2025 HP 156’ CARGO VESSEL (Ref#4119)

Converted from supply vessel, manufactured 1978, 156’ x 36’ x 11.7’, approx. 35’ eye height, main engines: (2) Detroit 16V-149 diesel engines, keel cooled, (2) Twin Disc MG540 reduction gears 2.5:1 ratio, (2) 99kw Delco generators p/b Detroit 8V71 engines, (2) multi stage air compressor p/b 15hp electric motors, Dynapower bow thruster p/b 6V71 Detroit engine, approx. 35,000 gal fuel tank capacity, approx. 90,000 gal potable water capacity, approx. 1600 gal ballast water capacity, approx. 750 gal lube oil capacity, approx. 600 gal hyd oil capacity, approx. 4000 gal sewage/gray water tanks, loadline (freeboard) 1’9-1/2” summer, 2’ winter, internal mud tanks converted to general cargo holds with (2) 10’ x 10’ cargo hatches, Beier DP system in place but currently not being used, model bow, square stern, (1) 10 ton HBL winch and (1) capstan, (1) 10 ton SWL deck crane mounted on pedestal in center of aft cargo deck, galley, crew quarters: (7) 2-man bunkrooms, (1) 4-man bunkroom, (3) heads, currently operating in the Caribbean and will return to US in March 2024 for dry dock Price: $1,400,000

2000 HP SUPPLY/CARGO BOAT (Ref#4122a)

Built 1976, 165’ x 36’ x 12’, clear deck 110’ x 27’, 420T deck cargo capacity, 189 GT, main engines: (2) Cummins QSK38 Tier 2, 12 knots speed, (2) Cummins 6BT 75 kw generators, 250 hp bow thrusters, 125,000 gal transferrable fuel capacity, 80,000 gal potable water capacity, 2500 gal lube oil capacity, 2500 gal waste oil capacity, certified to carry 20 passengers, 16 berths, 6 staterooms, 3 heads/showers, 360 cu ft walk in cooler, communication and navigation equipment, two pad eye for emergency towing, 24” moon pool for current profiler, located Louisiana Price: $1,050,000

7200 HP CREW / SUPPLY VESSEL (Ref#4060)

Built 2009, DP2, 185’ x 34’ x 14’, 6’ light draft, main engines: (4) Cummins QSK50, (4) ZF 4650 gear, (2) 85 kw main generators p/b Cummins 6BTA 5.9 engines, (1) Thrustmaster TH-250 RT (250 hp) retractable bow thruster, (1) Thrustmaster 30TT-20 AL (200 hp) Tunnel bow thruster, (4) 48 x 48 Rolls Royce propellers, 38,662 gal fuel capacity, 75,500 USG potable water capacity, 210 LT deck tonnage, 4050 sq ft clear deck area, (2) 85 kw Cummins 6BTA generators, Danforth anchor, 25 knots max speed, 12 berths, 80 passenger capacity, DP2 Kongsberg Dynamic Positioning, currently on land, located US Gulf Price: $3,400,000

5400 HP OFFSHORE SUPPORT AND CREW BOAT (Ref#4164)

Built 2003, Beier DP1 system, 170’ x 30’ x 11.6’, 7’ max draft, 4’ min draft, 20 knots max speed, 17 knots cruising speed, main engines: (4) Cummins KTA38, (2) 80kw Cummins generator4s, (1) drop down 375 hp bow thruster, 258 Lt deadweight capacity, 175 Lt deck capacity, 400 lb/sq ft deck capacity, 97’ x 24’ deck area, 39,000 gal drill/rig water capacity, 22,500 gal fuel capacity, 900 gal potable water capacity, accommodations for 10 persons in 3 staterooms, 70 passenger seats, located Louisiana Price: $1,575,000

1000 HP CARGO BOAT (Ref#4059)

83’ x 16.4’ x 7.1’ depth, 6.2’ draft, main engine: T220-ET Yanmar (15459 hours), 12 knot service speed, 4000 gal capacity fuel tank, 1083 gal fresh water tank, 192 gal lube oil tank, (2) 60 kw gensets 6CHL-N w/Shinko, YC2-851 2-speed gear box, MG-64B electric/air compressor, hydraulic anchor/windless, 3 anchors, Hiab crane, solar panel for radio battery, on land, located Alabama Price: $110,000

1700 HP OFFSHORE SUPPLY VESSEL (Ref#4141)

Built 2005, DP1 Kongsberg, 170’ x 36’ x 12’, 110’ x 30’ clear deck, 390 LT deck cargo, 80 GT, main engines: (2) Cat 3508B, 12 knots speed, 86 gph burn rate cruising speed, 8 gph burn rate standby, (2) 1560 kw Cat C9 generators, Schottel STT-170 450 hp tunnel bow thruster, FIFI 1-1000 gpm fire monitor, 58,400 gal potable water capacity, 40,000 gal fuel capacity, 2150 bbl liquid mud capacity, 1000 bbl methanol capacity, 1050 gal lube oil capacity, 20 berths, 6 stateroom, 6 heads, communication and navigation equipment, located Louisiana Price: $3,200,000

3500 HP CREW / SUPPORT VESSEL (Ref#4057)

Built 1996, 145’ x 28’ x 11.66’ depth, 7’ light draft, 10’ loaded draft, 6’ summer freeboard, 109 LT light ship, 240 LT cargo deck tonnage, 0.25 lt/sq ft deck strength, 83’ x 23’ cargo deck, 1909 sq ft clear area, main engines: (5) Cummins QSK 19M, twin disc 2.5:1 gear ratio, 3 rudders, 39 x 36 propellers, (2) 50 kw aux generators, Alta Laval fuel oil purifier, 24 knots max speed, 22 knots cruising speed, 167 usg/hr max fuel consumption, 150 usg/hr cruising fuel consumption, 35,700 usg drill water capacity, 1200 usg potable water capacity, 18,100 usg fuel capacity, 336 usg base oil capacity, 260 LT deadweight capacity, 4 cabins, 8 berths, 2 offices, 2 crew, 81 passengers, 8 mess, communication and navigation equipment, 900 gpm external fifi, located Louisiana, forgein flag Price: $725,000

2800 HP CREW / FAST SUPPLY VESSEL (Ref#4171)

Built 1994, 135’ x 26’ x 10’ depth amidship, 6’ light craft, 8.83’ loaded draft, main engines: (4) Cummins KTA19, (4) twin disc 508 reduction gears 2.5:1 ratio, (2) 50 kw Cummins 6BT5.9 generator sets, (4) 38D x 36P props, 22 knots max speed, 19 knots cruising speed, 132 USG/hr max fuel consumption, 119 USG/hr cruising fuel consumption, 105 LT deck cargo tonnage, 74’ x 20’ 1500 sq ft deck area, 10,360 gal fuel capacity, 800 gal potable water capacity, 23300 gal ballast/drill water capacity, (4) cabins, (8) berths, 8 person mess capacity, 73 max passengers bench class, 100 passengers EEP certified, navigation and communication equipment, current COI Price: $1,625,000

1130 HP OFFSHORE SUPPLY VESSEL (Ref#4172)

Built 1981, 110’ x 26’ x 11’, loaded draft 9’, light draft 7’, main engines: (2) Detroit 16V71, 10 knots cruise speed 50 gph fuel consumption, 25 gph station keeping fuel consumption, 23,000 gal fuel capacity, 40,000 gal water capacity, (2) Detroit 471 generators (rebuilt 2023), 16 passengers, 3 crew rooms with 10 bunks (1 VIP), passenger area 10 bunks, fully galley, clear deck 55’ x 24’, 65 ton deck cargo capacity, port engine rebuilt Spring 2024, generators reworked 2023, located US Gulf Price: $450,000

1130 HP OFFSHORE SUPPLY VESSEL (Ref#4172b)

Built 1979, Refitted 2014, 110’ x 26’, 9’ loaded draft, 7’ light draft, 25 gph station keeping fuel consumption, 50 gph cruise (20 knots) fuel consumption, 83MT fuel oil capacity, 130 MT potable water capacity, 60 long tons cargo deck capacity, main cargo deck 60’ x 24’, 3 crew rooms, 10 bunks, 3 passenger areas 16 bunks, full galley Price: $550,000

1200 HP PASSENGER/UTILITY BOAT (Ref#4160)

Built 1981, 98’ x 26’ x 8’, main engines: (2) 16V92 Detroit diesel engines, (2) 471 50 kw generators 471 Detroit, approx. 60 x 22’ (1320 sq ft) deck space, 50 LT at 36” height max deck capacity, 12 knots speed (light), 35,000 gal fuel capacity, 20,000 gal water capacity, seating for approximately 37, berthing for 14 passengers and 4 crew, remote steering station located aft of pilothouse, currently working in US Gulf Price on Request

1060 HP PASSENGER/CREW VESSEL (Ref#152)

Built 1980, certified 34 passenger/2 crew, 65’ x 17’ x 8’, Light draft 4. GT 57, NT 39. Clear deck space: 20’ x 13’. Main engines: (2) 12V71N, Reduction gear 2:1. Max speed: 25 knots. Fuel consumption 45 gph. Generator: (2) 23 kw Isuzu. Capacities: Deck cargo 10,000lbs. Max VCG 3’. Cargo water 1000 gal, potable water 100gal. Fuel 1100 gal. Accommodations: Crew 2, passengers 34 (total certified 36) Central A/C and heat, electronics. Several available. Located Louisiana PRICE: $450,000

1050 HP CREW BOAT (Ref#4118)

Built 1970, 65’ x 16’ x 7.8’, 15.5 x 30’ deck space, main engines: (2) GM 12V71N, (2) twin disc 514C reduction gears, hydraulic steering, 15 knots cruising speed, 20 knots top speed, 60 gph fuel consumption, 1900 gal fuel capacity, (1) 40kw Northern lights generator (installed 2013), (1) Sentry 32V 30amp w/3 banks used to charge 32 VDC system, (1) Nex Gen Generator with 32 VDC alternator, full galley, located East Coast Price: $365,000

1600 HP OFFSHORE SUPPLY VESSEL (Ref#3991)

Built 2004, 126’ x 30’ x 12’, 10.6’ operating draft, 262.33 LT light displacement, 1.5’ summer freeboard, main engines: (2) Cummins KTA 38-MO, Twin disc MG5225 reduction gears 5.04:1 gear ratio. (2) 55kw Onan generators w/Cummins engine, 300 hp tunnel bow thruster, 2500 gpm fire monitor, 12 knots max speed, 11 knots max speed (full load), 78 GPH fuel consumption, 249 LT deck cargo tonnage, 75’ x 26’ (1950 sq/ft) deck cargo area, 25,000 gal fuel capacity, 7500 gal potable water capacity, 46,600 gal ballast water capacity, 23,300 gal rig water capacity, 13,000 gal methanol capacity, 36 person max passengers (16 persons when carrying methyl alcohol), 16 berths, communication/navigation equipment, not up to date with USCG, in good shape, located Louisiana Price: $850,000

120’ x 26’ UTILITY VESSEL (Ref#4072)

Built 1980, 12’ depth, 6’ light draft, 7’6” loaded draft, main engines (2) Cummins KTA19 at 600 hp, (2) Twin Disc MG527 gears 5:1 ratio, (2) 50 kw generators w/(2) Detroit 471 engines, 11 knots max speed, 60 gph fuel consumption (max), 54’ x 20’ deck dimensions, 1080 sq feet deck area, 44,700 gal water capacity, 29,000 gal fuel capacity, 10 hp ballast pump, 10 hp bilge pump, 10 hp fuel transfer pump, 12 berths, 16 passengers, 2 heads, fire monitor w/3 fire stations, navigation and communication equipment, current COI, Sub M compliant, located US Gulf Price: $520,000

2400 HP CREW BOAT (Ref#3663c)

110’ x 24’ x 11’, Built 1977, (4) Detroit 12V71TI diesel engines, (2) 30 kw Detroit 371 genertors, 4000 gal fuel capacity, 1000 gal potable water capacity, 200 gal lube oil capacity, 37 tons deck cargo, 4 staterooms, 16 berths, AC/Heat, USCG Certified 200 miles, Current COI, excellent condition, located US Gulf Price: $600,000

1900 HP ALUMINUM PASSENGER/WORKBOAT (Ref#3930)

BUILT 1981, 98.9’ X 22’ X 7.4’ depth, (3) Detroit 12V71 diesel engines, 63 NT, 93 NT, COD expires 11/23, COI Expires 10/27, located Louisiana Price: $425,000

1755 HP CREW BOAT (Ref#4043)

Built 1979, 92’ x 19.5’ x 2.3’ depth, 6’ draft, main engines: (3) 1361 John Deere engines installed 2019 with 1015 hours, new SF gears, burn rate at 20 knots 35 gph, 41’ x 16’ available deck space, (2) generators with Detroit engines (recently calibrated), now set up for 25 passengers but can hold up to 50 with added safety equipment, 3000 gal fuel capacity, 750 gal potable water capacity, bunks for 5 passengers, 2 baths (1 with shower), washer/dryer, lounge, galley, drydocked and completely gone through at a cost of $400,000, many improvements including aluminum reworked on sides, new wheels, new tires on sides, 92 GRT, 68 NRT, current COI, located Texas. (If this boat is sold to an entity in Texas we can reduce the price by $350k due to a Texas State grant that can be issued) Price: $950,000

1800 HP CREW BOAT (Ref#4049b)

Built 1978, Foreign Flag, no certification, aluminum hull, 115’ x 22’ x 5’, 91 GT, 62 NT, 49 passengers, 2 berths, 6 staterooms, 22 knots speed, 75 gph burn rate, main engines: (3) GM 12V71TI, Twin disc MG514 gears 2.5:1 ratio, GM 371 generators, 32 x 32 propellers, 2400 gal fuel capacity, 600 gal potable water capacity, 70 LT deck capacity, located Guyana Price: $475,000

1200 HP WORKBOAT (Ref#4049a)

Built 1979, 115' x 22’ x 5’, Foreign flag, aluminum hull, 95 GT, 65 NT, certificate expired, 64 passengers, 5 berths, 2 staterooms, speed 22 knots, main engines: (2) GM 12V71TI Detroit, Gears twin disc MC514 2.5:1 ratio, 34” x 32” props, (2) generators GM33 30 kw, 2400 gal fuel capacity, 500 gal potable water capacity, 2700 ballast capacity, 25 tons deck capacity, located Guyana Price: $475,000

800 HP OCEANOGRAPHIC RESEARCH VESSEL (Ref#4079)

Built 1979, 79’5” x 18’ x 6’ max draft, main engines: (2) Detroit 12V71 400 hp each with 1450 hours, twin disc transmission, 10 knots cruising speed, 14 knots max speed, 50kw Detroit diesel 3-cylinder generator, 6kw Northern Lights generator, 2100 gal fuel tank, 640 gal freshwater tanks, 160 gal holding tank, main salon/chart room/ laboratory, full galley, head/shower, (2) Capt quarters, (8) crew quarters, 5000 lb A frame crane and winch, hot air furnace, marine A/C, communication and navigation equipment, fire equipment Price: $275,000

950 HP 80’ CREWBOAT (Ref#3967a)

Current COI, Built 1978, 80’ x 18’ x 8.6’, 5’ draft, 35’ x 16’ deck space, 26 passengers, 18,775 lb deck cargo capacity, main engines (2) 12V71TI, hydraulic steering, Twin Disk MG514 reduction gears, 20 knots speed, 50 gph fuel consumption, 1500 gallon fuel capacity, (2) GM371 30kw generators, navigation and communication equipment, A/C and heat, 10 cfm air compressor, located Texas Price: $400,000

3400 HP CREW BOAT (Ref#4153)

Built 1995, refurbished 2011, 135' x 28' x 11', 7’ light draft, 10’ max draft, main engines: (5) Cummins KTA19 M3 @ 750 hp each, Twin Disc 518 2.5:1 ratio, approx. 90 gph fuel consumption, 22-24 knots speed, (2) 50kw GM371 generators, 12,200 gal fuel capacity, 27,700 gal potable water capacity, 96 FT, 65 NT, 74 passenger capacity, 81’ x 21’ deck area, 190 LT cargo capacity, 6 staterooms, 10 berths, galley, communication and navigation equipment, located Louisiana Price: $925,000

1020 HP 65’ CREWBOAT (Ref#4017)

Built 1983, 65’ x 8’6” x 4’3” light draft, 13’ x 13.5’ cargo deck space, 21’ x 12.5’ clear deck space, main engines: (2) Detroit 12V71TI diesels, 2.5:1 reduction gear, 22 knots speed, stern control, 57GT, 39 NT, 1200 gal fuel capacity, 4.5 ton deck cargo capacity, (1) Detroit 271 20kw generator, navigation and communication equipment, certified to carry 26 passengers, 1 stateroom, 3 berths, galley, central air and heat, current COI, located Louisiana Price: $375,000

900 HP 65’ CREWBOAT (Ref#3967b)

Suspended COI (requires bottom and top inspection), Built 1970, 65’ x 18’ x 9.2’, 4.5’ draft, 28’ x 14’ clear deck space, main engines (2) 12V71, hydraulic steering, Twin disck MG514C reduction gears, 18 knots speed, 45 gph fuel consumption, 1200 gal fuel capacity, 12 passengers (including crew), 8000 lb deck cargo, 20 kw GM271 generator, navigation and communication equipment, A/C and heat, 10 cfm air compressor, located Texas Price: $185,000

600 HP WORKBOAT 55’ x 14’ x 3.5’ (Ref#3768)

Built 1966, new bottom and bow Feb 2003, 55’ x 14’, (2) Detroit diesel engines, Twin Disc 5111 2:1 gears, 18 knots speed, 700 gallon fuel capacity, water tanks but no plumbing, approx. deck area 25’ x 12’, 5 ton capacity, 10.5 kw generator, located Maryland Price: $35,000

1200 HP UTILITY BOAT (Ref#3812)

90’ x 26’ x 7’, main engines: (2) Detroit V16 92 diesel engines, generators (2) Detroit 371 30 kw, 22,500 gallon fuel capacity, 50,531 gallon water capacity, fresh dry bock, buttom cleaned and painted, props cleaned and coated, located Alabama Price: $350,000

4400 HP CREW BOAT (Ref#3663f)

140’ x 30.1’ x 12.2’, Built 1997, (4) Detroit 16V92 DDEC engines, (2) 55 kw Detroit 471 generators, 17,000 gal fuel capacity, 18000 gal potable water capacity, 200 gal lube oil capacity, 180 ton deck cargo, 5 staterooms, 16 berths, AC/Heat, USCG Certified, Current COI, excellent condition, located US Gulf Price: $975,000

4400 hp CREW BOAT (Ref#3663g)

140’ x 30.1’ x 12.2’, Built 2001, (4) Detroit 16V92 DDEC engines, (2) 55 kw Detroit 471 generators, 17,000 gal fuel capacity, 18000 gal potable water capacity, 200 gal lube oil capacity, 180 ton deck cargo, 5 staterooms, 16 berths, AC/Heat,USCG Certified 200 miles, Current COI, excellent condition, located US Gulf Price: $975,000

10,600 HP 250 PASSENGER VESSEL (SWATH) (Ref#185)

Built 1998, 101’6” x 44’ x 19’, 25 knots cruising speed, 30 knots max cruising speed, Main engines (2) Stewart & Stevenson Allison 501KF Turbine (10,600 hp), Type: 20HMGH-HP2SB (stbd) Ratio: 27.39:1” Continuous Power Rating: 4,600hp (3,430kW) - Continuous Input Speed Rating: 13,680rpm - Con tinuous Output Speed Rating: 499.15rpm (port) / 500rpm (stbd). Reduction gear (2) Philadelphia Gear Corp. 20HMGH-HP2S (port) Type: 20HMGH-HP2SB (stbd) Ratio: 27.39:1. (2) Newage 315kw generators p/bCummins NTA855, Omega Jet bow thruster, 250 passengers, 4 crew berth, 6 passenger heads, 2 crew heads with shower, galley, 17,500 gal fuel capacity, 445 gal potable water capacity, 26,764 gal ballast water capacity, 903 gal sewage capacity, full electronics, navigation system, located at a shipyard in Louisiana Price: $550,000

PASSENGER/CAR FERRY (Ref#4088)

Built 1971, 116’L x 37.5’ x 5.8’ draft, (4) Detroit 1271 diesels, (2) 371 Detroit diesel 50 kw generators, 103 passenger capacity, 22 vehicle capacity, crew requires one master and two deckhands, open vehicle deck with 100 ton capacity, large hydraulic powered stern ramp, 94 GT, approx. burn rate 50-60 GPH (based on fuel curve from engine manufacturer), USCG drydock inspection completed August 2023, USCG Subchapter T with current COI (expires May 17, 2027), ready for service, current COI, located New England Price: $1,050,000

8” ELLICOTT SWINGING LADDER DREDGE (Ref#4176)

20’ ladder, 17’ depth, John Deere 275 hp engine, Georgia pump, handles 4” solid material, located East Coast US Price: $150,000

12” x 10” ELLICOTT 370 DREDGE (Ref#4128T)

Built 1984, 36’L x 12’W x 4’ depth, Dredge pump engine Cat 3406, 31.5” cutter diameter w/5 blades, 40 HP, 0-39 rpm, 3840 lb cutting force, 195 lbs/in, (2) swing wiches 8000 lb, 22’ ladder, 16’ digging depth at 45 degrees, 20’ digging depth at 60 degree, 57.5’ overall length, 2000’ of flanged 10” HDPE dredge pipe and (40) 10” pipe floats, located Washington State Price: $275,000

10” SWINGING LADDER BARRACUDA CUTTERHEAD SUCTION DREDGE (Ref#4152)

25’ ladder length, 66’l x 17’10”w (with side tanks), 4’ depth, 10’ height (spuds removed), 30” mean draft (with fuel), 10” spud length, digging depth 2’ – 19’, maximum swing (swinging ladder mode) 19’ – 26’, maximum swing conventional mode 76’ x 87’. Cat 3406 KITA engine, Murphy EL-150-K1 day tank sender, R.R. 1000DF cutter gear 71,900 in/lb torque, Cutter’s Edge 5 blade left hand 31’ ½ ID, Fairfield reduction gear 8:1 ratio, Pullmaster winches, 12 x 10 dredge pump, well maintained, currently on landing repairing where needed and painting, located East Coast US Price: $425,000
Available at extra cost:
8500’ of 10” and 12” dredge pipe in excellent condition on trailers, McElroy Fuser and 10” booster

SRS CRISAFULLI SD110 AUGER DREDGE (Ref#4131)

Manufactured 2010, Perkins 110 hp engine (dredge has 640 hours), Yamaha 116 hp engine (approx. 270 hours), sitting since 2017, excellent shape
2012 Kearney trailer for piping with approx. 500’
2004 Hillsboro trailer for dredge
Located Iowa
Price: $150,000

ELLICOTT SERIES 2070 DRAGON 20” X 20” HYDRAULIC CUTTER SUCTION DREDGE (Ref#4062)

20” suction pipe, 20” discharge pipe, 50’ depth, 110’10” L (with ladder raised), 72” hull length x 26’6”W x 7’6” hull depth, 3 pontoons, 4.5’ hull draft (not including spuds), 9000 gal fuel capacity, 335,521 lb dry weight, main engine Cat C32 marine 1300 hp Tier 3 with heat exchanger, Aux engine Cat C15 440 hp tier 3 with heat exchanger, 1740 hp (not including genset), 250 hp at cutter shaft, 54” diameter cutter with 14,900 lb cutting force 18-27-36 rpm. 24” x 66’2” spuds Price: $2,500,000

SRS CRISAFULLI SD110 AUGER DREDGE (Ref#4056)

Manufactured 2012, 1400 hours, Perkins 110 hp engine, 1200’ of 6” solid dredge pipe, 300’ floating pipe, used in fresh water only, currently on land in Ohio (new cost $360,000) Price: $265,000

8” CUSTOM BUILT DREDGE (Ref#4140)

8” discharge, 7’ cutter on 21’ elevator (part that moves while cutting), 2023 Twin 90 hp Yamaha engine, 8’ custom built self-propelled, enclosed cab, with 30’ gooseneck trailer Price: $125,000

24” CUTTERHEAD SUCTION DREDGE (Ref#3908)

Built 2005, reconditioned 2009 and again in 2015, modular design of all welded steel, 133’ x 32’ x 7’ depth, 3.5’ draft (hull only), 170’ overall length, 24 x 24 HHD 62 Georgia Iron Works pump, DC motor G.E. 500 rpm, 3500 HP continuous 700 VDC armature, 9600 DC Digital drive system rated 3500 hp, 600 VAC input, 60 HZ, 72’ ladder plus 20’ extension, 700 hp electric over hydraulic cutterhead, 300 hp jet pump, 36” x 50’ (plus 40’ extensions) spuds hoisted by independent winch with 200 hp AC vector motors, (2) winches with 200 hp AC vector motors with 150,000# pull at 80 fpm. Ladder hoist independent winch powered with 100 hp AC motor. Dredge takes 4160 volt AC power through 3000’ of 8000 volt rated cable spooled on a diesel driven barge mounted reel. Cat 3406 emergency generator set to operate the winches in case of power failure. Price: $3,500,000

16” x 16” ELLICOTT SERIES 1270 DRAGON DREDGE (Ref#3877)

50’ max dredging depth, 125’ swing width at minimum dreding depth, 92’ swing width at maximum dredging depth, Cat 3508 engine (1000 hp) Marine Tier 3 (heat exchanger cooled), Cat C9 auxiliary engine (350 hp) Tier 3 (radiator cooled), 1350 hp (not including standard genset), 54” cutter diameter, 29-42 rpm, 7991 lb cutting force, 18” x 66’ spuds, 98’6” overall length with ladder raised, 68’ hull length, 26’ hull width including side pontoons, 4’6” depth, (3) pontoons, ¼” and 5/16” plate thickness of center pontoon, 221,000 lbs dry weight, 2’10” hull draft (not including spuds), 6600 gallon fuel capacity. 7 truckloads. Price: $1,600,000

14" x 12" AAMCO CUTTERHEAD DREDGE (Ref#2787a)

Reworked 2013 / Repowered 1995, Hull rebuilt / refurbished 2014, 65' x 24' x 5', draft 3', 7000 gal fuel capacity. 700 HP CAT 3412 Pump engine, GIW dredge pump, 14" Suction, 12" Discharge. 300 HP Cat 3306 Aux engine, 150 HP Cutterhead drive, 40' Ladder. (2) 16" x 50' stern spuds raised and lowered via winch. (2) 16" x 50' mooring spuds, self-raising and lowering. Hydraulic pumps, motors, cylinders, controls, valves, piping, hoses, and fendering. Firefighting equipment. On blocks, stored on land, excellent condition. Located Northeast USA, in the water. Price: $475,000

14” x 12” EAGLE IRON CUTTERHEAD DREDGE (Ref#4066)

60’ chain ladder 9” pitch, Mobile pully pump w/Cat 3406b (low hour), the two are connected together (can be splut up or sold together, used in fresh water in Texas Price: $325,000

10” X 12” DSC BARRACUDA SWINGING LADDER DREDGE (Ref#4113a)

Built 2005, 2022 Cat C15 engine, 3’-17’ digging depth, 55’ overall length (with ladder), 17’10” overall width (operational mode), 4’ hull depth, 12’ heigh (less spuds), 38” mean draft (with fuel), 11’11” width (trucking mode), (2) spuds 28’ (1145 lbs) and 30’ (1225 lbs), 70,000 lb total dredge dry weight (approx.).
3’-17’ digging depth,
Swinging ladder - Maximum cut at minimum depth 26’, Maximum cut at maximum depth 19’
Conventional – Maximum cut at minimum depth 80’, Maximum cut at maximum depth 70’
Cat C15 engine, 2828 lb cutting force, 68,000 in/lb operating torque, 88 lb/in cutting force, 28” cutter diameter, 3” shaft diameter, 35 hp cutter rating, 0-32 rpm cutter speed.
Winches: 9617 lb pull (1st layer), 40 ft/min line speed, ½” wire, 208’ drum capacity
Hoist cylinder: 25,535 lb extending force, 41,233 lb retracting force
12” x 10” dredge pump with 32” impeller
Hoist winches: 2204 lb line pull, 81/ft/min, 3/8” wire, 83’ drum capacity
24 VDC battery, 321-645 Delco alternator
800 gal fuel capacity, 150 gal hydraulic oil capacity, operator’s charge, lighted ring buoy, handrails and kick rails, guards, early warning alarm system and engine shut down system, cabin lights, electric bilge pump, replaceable edge cutter, dredge pump priming system, dredge washdown system, high capacity service pump, hydraulic pump/engine clutch disconnect, pump/engine reduction gear, stern pulling eyes,
last used October 2023 Price: $525,000

Available at extra cost:
12” SDR 17 DREDGE PIPE (Ref#4113b) approx. 10,000’ Price: $13 per foot
12” SDR11 DREDGE PIPE (Ref#4113c) approx. 5000’ Price: $13 per foot

IMS MODEL 7012 HP DREDGE (Ref#4000)

Approx 1600 hours on meter, GIW LCC-M 10” x 12” dredge pump, 500 hp John Deere diesel/hydraulic power unit, positioning boom with 30’ digging depth, hydraulic sand and silt cutterhead with replaceable teeth, Starwheel drive self-propulsion system, enclosed operator’s cab, located Midwest US Price: $525,000

IMS 7012 VERSI-DREDGE PACKAGE (Ref#3627)

Completely reconditioned 2020 with 2700 hours, all major rework to bring it back to excellent condition. 51'5" x 12' x 10'5" high. Dry weight 47,700lbs. John Deere diesel 6135 AFM85, 13.5L 500 HP main engine with 2,650 hours. Fuel capacity 400 gal. (2) pontoons, 45" x 43" x 468". Draft 35". Working capacity: 11'6" cutter, working depth 30'. Dredge pump: GIW 10" x 12", 5,000gpm at 125' TDH with 2,000' discharge length. Starwheel self-propulsion system.
Package includes:
GIW 10" x 12" Boosters pumps, with 2,000 hours.
Located Florida
Package Price: $675,000

10” ELLICOTT DRAGON SERIES 370-30 CUTTER SUCTION DREDGE (Ref#4084)

Completely refurbished in 2018, 30’ cutting depth, Georgia Iron works 10 x 12 pump, Cat C15 engine Tier 3, 36’ long, 12’ wide, 4’ deep, 2.7’ draft, 56,000 lbs dry weight, 800 gal fuel capacity, Kubota 6kw 8hp genset, basket cutter: 30kw 40 hp 30” diameter, 4,000 lb cutting force, 2 spuds with hydraulic rope pullers, located Southeast US Price: $445,000

10" x 10" IMS 4010 AUGER DREDGE (Ref#3006)

Built 1991, 38'6" x 9'7" x 9'4", weight 22,000lbs. (2) 35" x 38" x 309" pontoons. Draft 30". Working capacity: Cut 96" wide x 22" deep. Working depth 20'. Engine: Cummins 5.9 177HP, Vickers 3525 hydraulic pump, 2500 gpm slurry pump. Fuel capacity: 180 gal, fuel consumption 13.2 gal/hr. Auger head, cable system. 10" suction, 10" discharge. Used in fresh water. Not used for 1 1/2 years. Located Nebraska. Price: $85,000

12” X 10” SWINING LADDER DREDGE (Ref#3886)

Built 1997, Rebuilt 2012, 64’4” overall length x 18’6” operating width (11’10” transport width) x 4’ hull depth, 30” mean draft, 750 gal fuel capacity, 83,000 lb approx. total dry weight. 3’ minimum digging depth, 18’ maximum digging depth. In-hull mounted dredge pump (new pump shell in 2014), 12” suction x 10” discharge, impeller diameter 32, flow rate 3250 gpm @ 230’. Twin Disc MG5114 marine style reduction gear (new 2018), coupled to an elastomer style coupling 2.54:1 reduction ratio, located Northeast US Price: $275,000

8” VMI 615 HNE MINI DREDGE (Ref#4146)

Built 1996, 8” discharge, electric powered (150’ power cable included) 480V, approx. 240’ hose, cable driven, used in fresh water only at municipal facility pond, 44’ x 11’W, located Nevada Price: $50,000

8” ELLICOTT MUD CAT MC915 AUGER DREDGE (Ref#4150)

6187 hours, Detroit 671N diesel engine, 8” x 8” pump, 9’ wide x 18” max cutting depth, 15’ max operating depth, 39’1-1/2”L x 9’W x 8’8”H, 21” draft, has been sitting for a while, located West Virginia Price: $57,500

8” VMI 815 AUGER DREDGE (Ref#4069)

Built 1998, Warman ladder mounted 8” pump, 350 hp Cummins M11 engine with 3500 hours (recently rebuilt). Recently invested $150,000 into the dredge including: rebuilt engine, all new hydraulics, all new hoses, all new wiring, all new dredge steel and flex hose piping, brand new cutterhead, teeth and shroud and protective cage, rebuilt dredge pump with new impeller, structural and hull work. Located Texas Price: $110,000

8” CUTTERHEAD SUCTION DREDGE (Ref#4041)

Built 1988, 6 x 8, 47’ overall length (ladder up), 30’ hull length, 11’10” beam, 4’ depth, 20’ ladder length, 1000 gal fuel capacity, approx. weight 47,000 lbs, 17’ digging depth, hull center 22’ x 5’10” x 4’, sponsons 30’ x 2’11” x 4’, control room provides 360 degree visibility (top portion removable for transport), 6” x 25’ spuds, 26” ID 5-blade cutterhead 20 hp 34 rpm, Pekor 6 x 8 dredge pump, Pullmaster 9600 b swing winch, Pullmaster 2000 lb spud winches, Nopak 4 x 48 ladder ram, 1800’ 8” HDPE dredge pipe Price: $335,000

10” x 8” MUD CAT MC2000 AUGER DREDGE (Ref#3618)

Built 2004. 10" suction, 8" discharge, 6" particle clearance. Engine: John Deere 6081 H 300 HP. Length overall: 47, width overall 8'6", height overall: 8'6". Dry weight: 28,300lb. Draft 2.5' fully loaded. Main pump: Ellicott 24" impeller, capacity: 2500 gpm @ 162' TDH. Sludge pump: Ellicott 25" impeller, 10" suction, 8" discharge, 8" particle clearance. Propulsion: Triple wrap friction drive winch. 2300lbs line pull, 50 fpm max speed. Used in the same freshwater pond since it was new, never in saltwater. 2690’ of 8” HDPE SDR 17 dredge pipe, 1 rubber discharge hose, float for discharge hose. Located Northeast US. Price dredge only: $170,000 Package Price: $205,000

8” MUD CAT AUGER DREDGE (Ref#3917)

Manufactured 2005, 2500 hours, 20’ depth, 24” x 96” auger, 8” submersible pump, can produce 228 gpm @ 140’ head, Cat 275 hp diesel engine, New York Price: $75,000

8” MUD CAT 115D DREDGE (Ref#3815)

Built 2020, low hours, positioning boom with 15’ digging depth, heavy duty steel hull, 8” Hardox steel submersible dredge pump closed face impeller 125hp John Deere diesel engine, dual 25 hp Yamaha outboard with throttle control self-propulsaion system.
810’ of 8” SDR HDPE pipe
45’ 8’ flat discharge hose
(23) IMS Saddle type pipe/hose floats
Used for one job, excellent condition, on land in Minnesota
75 yards per hours in sludge type material
Price: $250,000

MUD CAT 40E ELECTRIC DREDGE (Ref#3806)

800’ lay flat hose, 600’ power cord, radio remote control with handheld remote, 4-point winch anchoring system, 600’ traversing cable, auto sense, black saddle floats. 24’3” overall length x 8’4” operational width, 16” draft. Floatation: (2) 28” dia x 10’ pontoons, working capacity: 7’6” wide, 14’ depth, 40 hp electric driven slurry pump, 6” suction, 6” discharge. Located Northwest USA Price: $165,000

SMALLEY DREDGER (Ref#4089b)

Built 2004, (yellow), good condition, ready to work Price: $62,000

SMALLEY DREDGE (EF#4089c)

Built 1989 (green), fresh rebuilt motor but needs cylinders repacked Price: $52,000

7000’ of 12” DREDGE PIPE (Ref#3997b) 12” DR17 HDPE dredge pipe with flanges and rings for 300’ sections, pipe has now been cut into 100’ lengths for storage, located West Coast Price: $90,000

FISHING/OYSTER BOATS

SHRIMP/OYSTER BOAT (Ref#4036)

Built 1981, 45’ x 15’, 671 Detroit, 3:1 twin disc, 7.5kw Lester petter generator, double rig, single rig, shrimp and oyster dredge, skimmers. Cabin with 2 bunks, sink, stove, shower, located US Gulf Price: $68,500

OYSTER BOAT (Ref#4029)

Converted ferry, 75’ x 30’, 2 outboard motors in rear, vacuum dredge, good shape, complete Price to be determined

AVAILABLE FOR CHARTER (Ref#4074)

The following equipment is available for charter. Located in Midwest USA. If you have an interest, please let us know area/location of activity, duration of charter and the type of work.

(A) 120’ x 45’ spud barge with raiser, office, and storage