DRILL RIG BARGES FOR SALE
Water depth of 250’ and drilling depth up to 25,500’.
Drill rig: National 1625E drawworks p/b (3) EMD D79 800 hp engines, 650 ton Tesco ECI top drive, National C375 rotary, 147’ x 1,300,000lb derrick (on 14 lines), National 760-H650 travelling block, National type “a” make up cathead, National type “a” breakout cathead. (2) National 12P160 mud pumps with shale shakers, desilter and desander. 10,000 psi BOP single stack 13-5/8” w/ 10k annular, 10k single ram, 10k dual ramp. 30T Letourneau BOP handling crane, Valcon control system, Hyd manual 10,000 psi choke and skill, Hydrill 2000 psi diverter. (2) Letourneau PCM120-AS cranes w/100’ boom rated 46 tons, (2) air hoists on drill floor, (4) air hoists for low line handling, (2) air hosts on cellar deck, (1) air hoist in derrick, (1) nominal air hoist rated “man-rider” on cellar deck. Watermaker, air compressors, sewage treatment.
Jack up barge: Hull 166’ x 132’ x 16’ depth. Mat 210’ x 170’ x 12’ depth including 2’ skirt, 2 legs tubular 312’ x 12’ OD with 6 pinholes spaced 6’. 1,719 bbl fuel capacity, 4,575 bbl drill water capacity, 474 bbl potable water capacity, 1,806 bbl liquid mud capacity, 6,030 cu ft bulk, 3,000 sacks storage capacity, 74 person accommodations, helideck. Power system (2) EMD 16-645-E8 1950 hp diesel engines, (1) EMD 8-645-E8 975hp. Generators: (3) EMD AB20-6 AC generators rated 2625 kva. Emergency generator 500kw.
Drill slot reach from 10’ aft of slot, bulkhead to 315’ aft of slot, bulkhead 21.5’ total. Transversal travel 7.5’ either side, 14000 kips load capacity within drilling area. Located US Gulf Price: $1.5 million
DRILL RIG BARGE (Ref#4199)
26’ x 10’ x 3’ barge, steel hull, hydraulic drill tower powered by Perkins 404 50 hp diesel engine, separate hydraulic system for spuds powered by 8 hp Honda engine, spud extensions, built for drilling holes and installation of piling in hard ground (where you can’t use pile driving method), 8” – 14” diameter, depth of water 3’ – 25’, depth of hole 6’ – 12’. Located Florida Price: $110,000
SKAGIT TEN POINT MOORING SYSTEM (Ref#584)
This is the forerunner of the Dynamic Positioning System
WMD-44 specifications:
2-3/4” diameter of ABS chain
Cast steel wildcat with standard five-whelp design for ABS chain
800,000 max pounds wildcat brake holding power
72” diameter x 12” width wildcat brake dimensions
Wildcat clutch: air operated jow clutch on the pinion. Manual override is provided.
Air actuated chain stopper will hold and release loads in excess of the breaking strength of 2-3/4 ” ABS chain.
Approximate weight: single wildcat: 52,000 lbs., Double wildcat 87,000 lbs.
(4) Skagit model WMD-44 double wildcat anchor windlasses, each consisting of two side-by-side units (one with motor and one less motor), arranged to be coupled together and powered by P&E 350 HP electric motors
(2) Skagit model WMD-44 single wildcat anchor windlasses powered by P&H 350 HP electric motors.
(2) Control cab assemblies (one cab to control two double and one single windlass)
(10) Skagit model DCF-44 deck mounted bullseye chain fair-leads for 2-3/4 ” chain
(1) Martin Decker tension indicating system (calibrated to exceed break strength of a 2-3/4” chain.
PRICE ON REQUEST
Let us know if you have any vessels, barges, dredges or related equipment for sale.
Keep us in your files for any equipment that may become available in the future.