TOP HEAD DRIVE RIGS FOR SALE

INGERSOLL RAND TH60 DRILL RIG  (Ref#5158T) 

Manufactured 1999, 825/350 air compressor, 4 x 3 centrifugal mud pump, Mounted on International truck with Cat C15 (rebuilt with 2300 hours), PTO, 340’ of 4-1/2” rod  Price:  $365,000

INGERSOLL RAND T4 DRILL RIG  (Ref#7454T) 

Manufactured 1989, 1000/350 air compressor, no mud pump, Cummins KT19 deck engine (rebuilt with 4000 hours), mounted on Crane Carrier with Cummins L10 engine, 8LL Eaton transmission, all new pumps, well maintained, 2 secondary carousels, many extras, 1000’ of 4-1/2” x 25’ drill pipe (3-1/2 thread) Price:  $295,000

REICHDRILL 650-DII BLAST HOLE DRILL RIG  (Ref#3507T) 

Sullair 900/350 air compressor (600 hours since rebuilt), Cat 3406C deck engine (600 hours since rebuild), mounted on 2006 Mack tri-axle truck with Mack diesel engine, 3 hydraulic leveling jacks, dust collector  Price:  $315,000

REICHDRILL 625W DRILL RIG  (Ref#4470T) 

Manufactured 1994, 900/350 air compressor, Cat 3406 deck engine, mounted on Ford tandem axle truck with Cummins 8.3 engine, 6 rod carousel, 420’ of 4-1/2” x 20’ (3-1/2 Reg) drill rod (fits on rig), chains and sprockets, hydraulic lines gone through, includes hammer and bit Price:  $275,000

CHICAGO PNEUMATIC 700 DRILL RIG  (Ref#14193T) 

Manufactured 1978, 1250/350 Sullair compressor, 50,000 lb pullback, Cat 3406 deck engine, mounted on 1978 Ford 8000 truck with Cat V636 engine, 20,000’ of drilling on recently replaced pulldown chains, steel and/or aluminum drill rods available at extra cost  Price:  $200,000

DRILTECH T25KW DRILL RIG  (Ref#8026T) 

Manufactured 2007, Sullair 1000/350 air compressor, Cummins KTA19 deck engine, water pump, mounted on Sterling truck with Cat C12 engine, 77,000 miles, water injection pump, lubricator, 7 rod carousel with 4-1/2” rod, rod box, 22 pieces drill pipe, 8LL transmission, no compressor clutch  Price:  $340,000

VERSADRILL 1000X DRILL RIG  (Ref#9222T) 

Manufactured 2000, 750/300 Ingersoll Rand air compressor, 5x6 Gardner Denver mud pump, 40,000# pullback, no carousel (currently using 3.5" x 20' rods), rod box (can hold 500'), hammer oiler, water injection pump, 12,000# min winch, 2,000# sandline, mounted on International truck with Cat C12 PTO engine, comes with 10 joints of 3.5" x 20' pipe  Price $325,000CDN

VERSADRILL V100NG DRILL RIG  (Ref#2781Ta) 

Manufactured 2006, 500/200 air compressor, 4 x 3 x 13” centrifugal Mission Magnum mud pump (new March 2024), 25 gpm water injection pump, 12,000 lb main winch, 2000 lb aux winch, 40,000 lb pullback, 22,000 lbs pulldown, mounted on all wheel drive 2006 Peterbilt truck, Cat CF7 engine (rebuilt at 480,784 miles), (10) 3-1/2” drill rods in carousel, (5) 3-1/2” drill rods in rod box  Price:  $450,000

SPEEDSTAR 25K  (Ref#13011T) 

Built 1988, 900/300 Sullair compressor, 3 x 4 centrifugal mud pump, mounted on 1998 International Paystar 5000 with 400 Big Cam Cummins engines, standard features, 6 rod carousel, rod box, 4 hydraulic leveling jacks, rig has 30k hydraulics
Approximately 700’ of 4-1/2” x 20’ drill pipe (3-1/2” reg), 6” down the hole hammer,bits
Trailer mounted 1000-1200 gallon mud shaker with 3 cylinder Deutz diesel engine
Price:  $169,500

SCHRAMM T300 DRILL RIG  (Ref#8265T) 

Year 2004, 435/200 Sullair compressor, Gardner Denver 5 x 6 mud pump, 2 cyl Bean water injection pump, dual motor tophead with swivel assembly, mounted on 2004 International 7400 6x6 truck, 3 hydraulic leveling jacks, 15 rod carousel with hyd motor (holds 300’ of 3” OD drill pipe), driller’s platforms, drillers station with valves and gauges, new hydraulic pumps, new hydraulic motors for tophead, new front tires, 500 hours on engine  Price:  $270,000

GEFCO 22 MINI TOP HEAD DRILL RIG  (Ref#8633T) 

Manufactured 2000, 200 cfm air compressor, 3 x 4 Tibban mud pump, mounted on Ford truck with DT466 engine, top head needs rebuilding, main pump is leaking, transfer case is removed from rig, switch driveline to drill, needs outer cover for mud pump.  New radiator on top drive motor, 30k top head and pumps  Price:  $110,000

DRILLMAX DM450 DRILL RIG  (Ref#1386T)

Built 2023 (took delivery December 2023), approx 1,000 hours, 500/300 air compressor. 4x3x13 centrifugal mud pump, 12,000# main winch, 1,800# secondary winch, 15 rod carousel set up for 3" drill pipe, rod spinner, rod box,  mounted on International 6x4 tandem axle truck with Cummins engine, automatic transmission, chrome wheels, come with 500' Mayhew Jr 3” x 20' drill pipe (new Dec 2023), manufacturer's warranty is valid until Dec 2024  Price:  $875,000

DRILLMAX 350 DRILL RIG  (Ref#3408Ta) 

Manufactured 2005, 300/200 Ingersoll Rand air compressor, (2) 3” diaphragm pumps, Braden hydraulic winch, mounted on 2005 Ford F650 4 x 4 truck with Cat engine, manual transmission, manual brakes, 4 hydraulic leveling jacks, rebuilt rod box, 200’ of 2-3/8 Mayhew Jr drill pipe, many rebuilds, well maintained  Price:  $270,000

SPEEDSTAR SS15-III DRILL RIG  (Ref#9337T) 

Manufactured 1977, LeRoi 256-S2 450/250 air compressor, 4 x 4 x 13 centrifugal pump (he uses for drilling), mounted on 1977 GMC 9500 truck with 290 Cummins engine, PTO, rod box, leveling jacks, no carousel, 300’ of 3-1/2” x 20’ flush wall drill pipe, good shape, running rig, handling tools, bits  Price:  $60,000

DUAL ROTARY DRILLING RIG SYSTEM (COMPARABLE TO FOREMOST DR24)  (Ref#4743T)



System consists of Davey Kent tophead (upper drive) and CR26 (Lower drive) mounted on Soilmec R515 track mounted drill rig
Includes:
CR26 LOWER DRIVE: manufactured 2018, can drive casing up to 26”, approx. 1,200 hours of total usage, 5,500# total weight, 180,000# torque, up to 120RPM, 1,400,000# static load
Comes with jaws for lower drive:  6”, 8”, 16”, 20”, 24” and diverter with 16”, 20” and 24” adapters , cyclone
DAVEY KENT DR-14HP UPPER DRIVE (TOPHEAD):  manufactured 2018, 3 motor topdrive, 500# weight, 3 speeds (75RPMs, 37RPMs, 25RPMs), torque ratings:  14,564# torque@25RPMs, 9,709# torque@37RPMs, 4,855# torque@75RPMs
SOILMEC R515 DRILLING RIG:  manufactured 1997, mounted on Cat 330 base with expandable tracks (3,000mm-4,100mm), Cat 3306 TA diesel engine, 137kNm / 101,000# rotary  torque (with original soilmec rotary head), telescoping kelly bar.  All parts are there to convert it back to a piling rig.
The unit weighs 105,000# in transport mode (CR26 lower drive is removed during transport)
Price on request

WALKER-NEER 250-40 DRILL RIG  (Ref#1744T) 

Refurbished 2000, (2) Cat C15 diesel engines (one powers rig, one powers HPU), pipe handling arm, currently reworking tophead  Price:  $170,000

See more top head drive drill rig for sale on our website at: Top Head Specials

LET US KNOW WHAT EQUIPMENT YOU HAVE FOR SALE !!

If you want further info and photos email, call or contact and we can send additional information and photos
(516) 536 7375 - rigs@sunmachinery.com