POLE RIGS FOR SALE
COOPER 32 X 32 DOUBLE DRUM SERVICE RIG (Ref#442Na)
Mounted on 1993 Mack truck with Mack E7 350 engine, right angle gear box, 8” x 7” x 65’ double poles hydraulically raised and scoped, hydraulic winch, 4 hydraulic leveling jacks 6500’ +/- 5/8” sand line, air clutch, 7/8” casing line, air clutch, 35 ton McKissick casing blocks, Foster power tongs 1-1/2”, 2-3/8”, 2-7/8” tubing bail, tubing elevators 1-1/2” and 2-3/8” Guiberson T40 air slips, rod hook, rod elevators 5/8” and ¾”, wrenches, swab tools, 1-1/2”, 2-3/8” and 4-1/2”, oil saver, pump, Martin Decker weight indicator, depth meter, Midco sand pump, misc tools
Price: $250,000
COOPER DOUBLE DRUM WORKOVER RIG (Ref#1557Ne)
Mounted on 1996 Ford truck, low mileage, Cummins engine, 8 speed transmission, 26 x 26 Cooper air over dog clutch, all air controlled, 366 International diesel with Allison auto on deck, 8 x 10 pole, leveling jacks, 2000’ 9/16” new sandline
Price: $100,000
CARDWELL K200 WORKOVER RIG (Ref#7281R)
Double drum, double pole, 9/16” x 6500’ line on sandline, 7/8” tubing line, (2) – 2 Sheave McKissick block, mounted on International truck with Cummins (rebuilt) diesel engine, 145 Waukesha engine on deck, Foster 58 tongs, elevators, handles 3500’ of 23/8” tubing, new brake pads on tubing drum, new PTO, new hydraulic tank, new tubing line, all new connections. PRICE: $110,000
CARDWELL K200 (Ref#11948N)
Trailer mounted, double pole 10 x 13, needs engine
Price: $70,000
CARDWELL K200 (Ref#10509)
Manufactured 1991, double drum, 7/8” main line, 9/16” sand line, mounted on 3 axle 1990 International truck with 400 hp Cummins diesel and 10 speed transmission, 4 hydraulic leveling jacks, right angle drop box, (2) 8 x 6 double pole, 72’ height of poles, 100,000# pullback capacity, poles hydraulically raised and winch scoped, good condition
Price: $220,000
CARDWELL DOUBLE DRUM WORKOVER RIG (Ref#1557Na)
Double drum drawworks p/b 6V71 Detroit, Allison Auto transmission, K100 drawworks, 8” brakes, 10x13 pole raised and scoped with hydraulic winch, mounted on 1982 Ford truck with 3208 Cat engine, Allison auto transmission, hydraulic leveling jacks
Price: $120,000
AL CARDWELL 4400’ WORKOVER RIG (Ref#4463N)
Double drum, 10-3/4 x 8-5/8 winch raised single pole mast, mounted on tandem axle Mack truck with Mack diesel engine, hydraulic jacks, remanufactured spudding beam, 5300’ of new ¾” drill line, 5,000# working winch, air clutch on rig, new air clutch on sand drum, new paint, hydraulic hook up for power tongs
Price: $130,000
CARDWELL DOUBLE DRUM WORKOVER RIG (Ref#1557Ni)
Mounted on 1992 International truck with Detroit engine, 9 speed transmission, long wheel base, double frames deck engine 471 Detroit, 5 speed trans., 38 x 8 double drum drawworks, Catwell 8 x 10 pole, 7/8” tubing line, 4000’ of 9/16” sandline, straight air, leveling jacks
Price: $50,000
CARDWELL H (Ref#986N)
Double drum workover and cable tool rig, mounted on tandem axle trailer, 1800’ sandline with about 4,000’ of new line on a spool, new block, doghouse on trailer, 6 cylinder Hercules deck engine propane, 55’ pole with 3 settings 42’, 48’ and 55’, (3) 15 ton manual jacks, 20’ stem and jars, elevators, bails, boomers, tubing group slip, quick hitch block, (2) breakout tongs, tubing tong, rod wrenches, cable line cutter, 30’ bailer
Price: $55,000
WICHTEX C65 (Ref#12360N)
Double drum, double pole 8-5/8” x 7 x65’, 6,000’ of 2-7/8” line, mounted on 1974 International Model 2070A tandem axle truck with Detroit diesel engine, leveling jacks, 454 Chevy propane engine on deck with 250 gallon propane tank, automatic transmission for smooth operating, Foster 58 power tongs, Guiberso air clips, tooled for tubing and rods, currently working
Price: $120,000
FRANKS 44 WORKOVER RIG (Ref#697Na)
4000-5000’ depth, double drum, 10’ x 13’ x 65 winch raised single pole, mounted on 1989 International tandem axle truck with DT466 diesel engine,13 speed transmission, tooled for tubing and rods, tongs, air sprockets, currently working
Price: $235,000
FRANKS 844 CRUSIER WORKOVER RIG (Ref#697Nb)
Single drum, mounted on 1981 GMC Brigadier with diesel engine, 10” x 13” x 65’ winch raised single pole, all tools for tubing and rod, Peck-o-Matic tongs, currently working
Price: $145,000
FRANKS 44 WORKOVER RIG (Ref#1557Ng)
Mounted on 1991 Mack truck with Mack engine, Detroit 471 deck engine w/8 speed transmission, Wilson sandline, 8 x 10 poles, leveling jacks, air controls
Price: $100,000
FRANKS DTM 33 (Ref#11273)
Double drum, 4000’ with ¾ tubing line, Wabco air controls, mounted on 1979 GMC Brigadier and 6 x 4 truck with 6 cylinder engine and PTO, with manual screw jacks, Franks 7” 26# x 5-1/2” 20# double pole mast, 55’ high, cable raised and scoped with single monkey board and tubing block, folding platform, weight indicator, hydraulic power tongs, Guiberson BOP 7-1/16” x 3000# BOP. Handling tools: BJ 2-7/8” elevators, rod hook, 50 ton bales, tubing spider, wrenches Located Southeast Asia
Price: $150,000
COOPER 32 (Ref#6588N)
Single drum, 8 x 10 pole, Detroit diesel deck engine, mounted on truck that needs to be replaced, Foster 58 tongs
Price: $70,000
WILSON SUPER PULLING UNIT (Ref#591N)
Single drum, drawworks air over jaw with hand controls, tool boxes, brake pads are less than 1 year old, brake system rebuilt, 471 Detroit deck engine, Spicer transmission, mounted on 1986 Mack truck with 350 Mack engine, single pole 10-3/4 x 8-5/8 (winch raised), toolboxes. New or rebuilt: Spicer trransmission rebuilt, new hydraulic pump, Mack engine rebuilt, new brakes, 80% rubber, brake system rebuilt, currently working
Price: $95,000
Available at extra cost: 2-3/8”, 2-7/8” tubing elevators, 5/8”, ¾” and 7/8” rod elevators, Guiberso tubing slips, BJ powr tongs, rod wrenches, pipe wrenches, misc tools
Price: $110,000
WILSON DOUBLE POLE RIG (Ref#3674Na)
55’ to 84’, double drum drawworks, high/low clutches on 7/8” cable tubing drum, mounted on 1982 Paystar 5070 truck 350 Cummins, 10 speed, Wilson right angle box, holds 6000’ of 5/8” cable, air operated clutch, 2 winches, McKissick 50T 3-sheave
Price: $170,000
WILSON SUPER 38 WORKOVER RIG (Ref#565N)
Double drum, double pole, mounted on 1990 tandem axle Volvo with Cummins 250 hp diesel engine, diesel on deck, all tools, good condition, hydraulic levleing jacks Price: $95,000
WILSON SENIOR 32 (Ref#7746N)
Double pole 7-5/8 and 8-5/8, double drum, 8V71 Detroit deck engine, mounted on 1987 International Eagle with 350 Cummins engine, Jake brake, new Carter tongs, 4-1/2” tools, no sand pump or slips, currently working, completely refurbished, all new hydraulics, new air clutches,
Price: $325,000
WILSON SUPER DOUBLE POLE RIG (Ref#1535N)
Trailer mounted, 90’ scope, 12” Brewster rotary table, string of 2-7/8 bottleneck pipe, misc tools, sitting for 20 years
Price: $50,000
FRANKS 44 WORKOVER RIG (Ref#407N)
Double drum, main line 7/8”, sandline 6000’ of 9/16”, air over grease clutch, 10 x 13” pole, mounted on 1973 3-axle Crane Carrier with 6V71 Detroit diesel engine, PTO drive for rig, Fuller transmission, 2 manual leveling jacks, McKissick block Price: $145,000
FRANKS 844-40 WORKOVER RIG (Ref#149R)
65’ x 10 x 13 single pole, double drum, mounted on 2005 Mack truck, completely tooled, working, 4000’ capacity, new tubing line, new sand line Price: $375,000
WALKER NEER 32 SPECIAL (Ref#1923N)
Manufactured 1953, 140 Waukeshaw engine, mounted on dobule axle trailer, 2 lines (drill line, sand line), double pole, friction clutches, some 4-1/2” tools included
Price: $60,000
WALKER-NEER S32 (Ref#4369N)
double pole 5 x 7, 55’, triple drum, cathead, trailer mounted, pulled by 6 x 6 Army truck with tires chains, HD winch, double pole, 2500’ of new 7/8 drill line, all tools, stems, jars, bits, etc., casing tools 4”, 5”, 7”, 8” and 10”, Waukesha gas/natural gas, working rig, good conditio, manual leveling jacks Price: $140,000 Reduced Price: $73,000
WALKER-NEER 37 (Ref#978Nc)
3 drums, spudder, 8-5/8” x 7” x 65’ double pole, Tandem axle trailer mounted with 5th wheel, 237 hp Mack in line 6 cylinder diesel engine, 4 speed transmission, Controls, gauges, battery starter, Excellent condition, Ready for use. 7/8” line on 2 drums, 5/8” line on sandline drum
Price: $90,000
WALKER NEER C32 (Ref#11393N)
Rebuilt Detroit 471 deck engine, mounted on 1992 Mack with diesel engine, 55’ 5x7 double poles, 3 drum drawworks, air actuated clutch & slips, 36” Bull wheel, 40” sandline drum, 33” Tubing drum, BJ tongs with air backup, hydraulic leveling jacks
Price: $110,000
WALKER NEER 32 SPECIAL CABLE TOOL RIG (Ref#834N)
Trailer
mounted, Waukesha propane deck engine, twin pole mas, good assortment of tools,
running condition Price: $30,000
PRICE REDUCED: $26,500
WALKER NEER S32 (Ref#651N)
Manufactured
1963, trailer mounted with 371 Detroit engine, 4 line machine, fully tooled 3”
up to 26”, running now Price: $70,000
PRICE REDUCED: $55,000 – Idaho
Sun Machinery Corp.