SUN MACHINERY CORP

Telephone:  (516) 536 7375                    Fax:  (516) 536 7317

These rigs are located at various locations through out the USA and  Internationally.

e-mail:   rigs@sunmachinery.us

 

 

 

TESCO, OIME, CROWN DUKE, DRACO, BW, UPETROM

 

 

 

TESCO 2800 METER RIGS  (Ref#497N)

2 Available – Manufactured 1990

RIG 1

Telescopic Double – Capacity: 10,000 Feet

The rig is designed to move using pickers and conventional tractor trailer units. With the exception of the; substructure, derrick package and pipe tubs, all equipment is housed within standard shipping containers, which are 8’ wide and 20’ long by 8.5’ high.

DRAWWORKS:    

Tesco Hydraulic Single Drum Drawworks, Lebus grooved for drill line. The drawworks is equipped with two 50” disc brakes, two calipers far the working brake and two calipers for the Hydraulic break-out and make-up mounted in derrick.  Driven by C31 Reiner hydraulic series 125 Vane motor.

 

RIG POWER

MAST     

SUBSTRUCTURE

CROWN BLOCK

 TRAVELING BLOCK/HOOK

 TOP DRIVE/SWIVEL             NOT INCLUDED IN PURCHASE

 ROTARY TABLE

 PUMP

5” x 120 spm x 3,655 psi

6” x 120 spm x 2,540 psi

MUD SYSTEM

WELL CONTROL SYSTEM

B.O.P.’S:     NOT INCLUDED IN PURCHASE

INSTRUMENTATION

DRILL COLLARS

PIPE TUBS

 

TANKAGE

LIGHT PLANT

BOILER

RIG MANAGER ACCOMMODATIONS

 RIG 2

Telescopic Double – Capacity: 10,000 Feet

The rig is designed to move using pickers and conventional tractor trailer units. With the exception of the; substructure, derrick package and pipe tubs, all equipment is housed within standard shipping containers, which are 8’ wide and 20’ long by 8.5’ high.

DRAWWORKS:    

Tesco Hydraulic Single Drum Drawworks, Lebus grooved for drill line. The drawworks is equipped with two 50” disc brakes, two calipers far the working brake and two calipers for the Hydraulic break-out and make-up mounted in derrick.  Driven by C31 Reiner hydraulic series 125 Vane motor. 

RIG POWER

MAST     

SUBSTRUCTURE

CROWN BLOCK

TRAVELING BLOCK/HOOK

TOP DRIVE/SWIVEL             NOT INCLUDED IN PURCHASE

 ROTARY TABLE

PUMP

5” x 120 spm x 3,655 psi

6” x 120 spm x 2,540 psi

MUD SYSTEM

 

WELL CONTROL SYSTEM

B.O.P.’S:                NOT INCLUDED IN PURCHASE

 INSTRUMENTATION

TUBULARS

DRILL COLLARS

PIPE TUBS

TANKAGE

LIGHT PLANT

BOILER                   NOT INCLUDED IN PURCHASE

RIG MANAGER ACCOMMODATIONS

CURRENTLY LOCATED IN USA

PRICE FOR BOTH:  $2,100,000

 

 

TESCO  (Ref#13814)  9800’ drill rig, single drum drawworks, powered by (2) Series 2000 DDEC III Detroit diesel 750 hp each, 100’ x  133,000 daN max static hookload w/8 lines, Tesco substructure swing up 17’ x 3.6 meter, 12’ wide x 40’ long, KB to ground 17.7’, bottom of table beam to ground 15’, Tesco crown and block w/4 sheaves in split block, Tesco traveling block and hook, 200 ton split block, Tesco integrated swivel with top drive assembly, Tesco Model 200 HMI (200 ton) top drive, max torque 20,000 ft/lb, max speed 190 rpm, 2” rotary hose, 17.5” opening in rotary table, Continental Emsco F800 triplex pump, powered by Hagglund hydraulic 750 hp motor, pulsation dampener, Mud system, well control system, weight indicator, Water and fuel tanks, light plant, 6 years old, well maintained and in excellent mechanical shape,  On Lease – Off Market

 

TESCO  (Ref#13815)  9200’ drill rig, single drum drawworks, powered by (2) Detroit 12V92TA diesel engines (860 hp each), 100’ x 133,000 daN max static hook loead w/8 lines, Tesco substructure swing up 17’ x 3.6 meter, 12’ wide x 40’ long, KB to ground 17.7’, bottom of table beam to ground 15’, Tesco crown and block w/4 sheaves in split block, Tesco traveling block and hook, 200 ton split block, Tesco integrated swivel with top drive assembly, Tesco Model 200 HMI (200 ton) top drive, max torque 20,000 ft/lb, max speed 190 rpm, 2” rotary hose, 17.5” opening in rotary table, Continental Emsco F800 triplex pump, powered by Hagglund hydraulic 750 hp motor, pulsation dampener, Mud system, well control system, weight indicator, Water and fuel tanks, light plant, 6 years old, well maintained and in excellent mechanical shape,  On Lease – Off Market

 

TSM TOP DRIVE DRILLING RIG  (Ref#8387R)  Manufactured 2006, 7200' depth capacity top drive, 600hp CAT C16 on deck, 36'L x 12'H substructure, 1 piece mast 69' x 200,000# hydraulically raised, 800hp Triplex mud pump BSF 800 with CAT 3412 E diesel engine, 315 barrel mud system  with shale shaker and desander, FDS 100 ton top drive 9,000 Ft/# torque, Winterization- protective shelter, Walker-Neer automatic pipe feed system on mast, 90 - 70 Walker-Neer brake-out and make-up wrenches, 320 kw generator with CAT 3406, 225 kw generator with CAT3306, 9" x 3,000# BOP and annular BOP, 10' x 60' well site manager trailer, 2378 gallon fuel tank, 15850 bbl water tank.

PRICE:  $2,700,000

 

O.I.M.E. SL-5  (Ref#6946N)  750 hp SL-5 OIME drawworks, 3-engine compound powered by (3) 3408 Cat (365 hp), 131’ mast rated for 550,000 lbs., Parco fast move swing up substructure, Continental Emsco 800 hp triplex mud pumps tail driven, 1000 barrel mud tanks with mud cleaning equipment, necessary handling tools, 174 jts of 4-1/2” drill pipe, 26 drill collars, (1) 20’ container of spare parts, rig is field ready, rigged up in USA  Price:  $6,000,000

 

OIME SL-5 (Ref#12462Nc) – currently drilling

Drawworks One (1) OIME SL-5 drawworks 700 HP, Parmac 343 Hydromatic brake, drum grooved for 1 1/8” drilling line, Crown-o-matic

Catworks One (1) OIME C-7, 400 HP, with torque tube with one each model 37AH make up cathead and one model 24AH break out cathead

Mast

One (1) Parco 550-K cantilever mast, 131’ tall mast with mast stand, Tong counterweights, Ladder, Derrick climber, Geronimo Static hook load with 10 lines – 550,000 lbs maximum wind 85 MPH, with 4 inch 5,000 psi standpipe & standpipe manifold

Substructure

One (1) substructure Parco split level, 550,000 lb hook load with maximum pipe setback capacity 400,000 (simultaneous) 18’ height above ground with 15’ clear height under the rotary table

Rotary Table One (1) Pyramid-Hacker 27-1/2” rotary table rated at 275 tons, disk back brake system with split rotary table bushings

Engines Three (3) Caterpillar 3408B engines 375 HP each with Allison CT6061 transmissions on compound

Mud Pumps Two (2) 1000HP triplex mud pumps independently driven by Caterpillar D-399 Engines

Travelling Block One (1) Ideco model shorty, 260 ton traveling block, 5-36” sheaves and 1-1/8” line

Hook One (1) ideco, model shorty, 260 ton

Elevator Links One (1) set elevator links, 2-3/4” x 114” x 300 tons

Swivel One (1) Ideco swivel, model TL-300, capacity 300 tons

Drill Line One (1) 5000’ of 1-1/8” drilling line with

Deadline Anchor One (1) National type D deadline anchor with Martin Decker type E-80 load cell

Air Hoists Two (2) Ingersoll Rand K5UL air hoists with 5/8” wire line

Crown Block Assembly

One (1) OIME 5-36” sheaves and 1-52” fast line sheave grooved for 1 1/8” drilling Line

Toolpusher’s Trailer One (1) Rig Manager trailer with two each bedrooms, two bathrooms, kitchen,

laundry room

Mud Conditioning Equipment

Mud pits – 720 total barrels 1-270 bbl suction pit with four compartments, three Brandt 10HP mud agitators, one mixing mud hopper and one 50 HP 5 x 6 Halco 2500 supreme centrifugal pump.

1-200 bbl shale pit with four compartments, 1-Brandt 10HP mud agitator and 3 each per tank 3” mud guns with 1 Ό” nozzles

1-250 bbl storage pit with two HP mud mixers powered by one 5 x 6 centrifugal pump

One (1) Derrick mud cleaner FLC 3 panel with 20-4” desilter cones powered by 50HP MCM 5 x 6 Centrifugal pump

One (1) Harrisburg desander with 1-12” desilter cone, powered by 50HP MCM 5 x 6 centrifugal pump

Two (2) Derrick flow line cleaners

One (1) mud bucket with 5 and 3-1/2” inserts, discharge hose to the flow line

One (1) mud line, manifold: 4” 5000 psi mud line with 6-4” 5000 psi Demco gate

valves and 3-4” 5M# vibrator hoses

One (1) rotary hose, 3 ½” ID with 4” unions, 5000 PSI WP, length 60’

BOP Equipment

One (1) Hydril annular BOP, 13 5/8” , 2000 psi stud top and 13 5/8” flanged bottom 3000 psi

One (1) Washington rotating head series 1300, 13 5/8” bottom flange 3000-5000 psi, 150 psi WP

One (1) Cameron double BOP, 13-5/8” 5000 psi, type U, flanged top and bottom with 4-3-1/16” 5000 psi outlets and standard 11” cylinders

One (1) Cameron hydraulic actuated gate valve, operated, 4-1/16” 5000 psi

One (1) Cameron gate valve, manually operated, 4-1/16” 5000 psi

One (1) Cameron gate valve, manually operated, 2-1/16” 5000 psi

One (1) choke line, armored fire resistant API flexible hose 3” 10,000 psi, 3” ID, API 4 1/16” flanged both ends, 44’ 8” long

One (1) Kill line, steel flex hose, 5000 psi, 2” ID, API fig 1002 hammer unions

One (1) choke manifold with 2 each 4 1/16” 5000 CIW Type FC manually operated gate valves, 5 each 3 1/16” 5000 psi CIW Type F manually operated gate valves, 1 each 5000 psi 4” Oteco manual operated valve 2 each 5000 psi 2 1/16” Cameron manually operated gate valve, 1-4 way tee block, 2 each 2 1/16” 5000 psi manual operated hydraulic choke, 8-5/8” OD header pipe, 2-3-1/8” 5000 psi flanges and 1-4-1/8” 5000 psi flange

One (1) Air remote control unit mounted inside top dog house with access to control valves from the rig floor

One (1) lot colflex BOP hoses, One (1) Degasser

Air Compressors

One (1) Quincy piston compressor, model 390LVD-A, with 20 HP electric motor and 300 gallon receiver tank

Two (2) air dryer, Airtek desiccant type, model TW55 T( 4103-09K, (arctic class)

Handling Equipment One (1) set Woolley type B tongs, with jaws for 3-1/2” to 10-3/4”, 11-3/4” and 13-3/8”

One (1) Oil works Kelly spinner with RH & LH air drive motors, 6-5/8” regular Box & Pin

Drill Collars TBD

Drill Pipe TBD

Miscellaneous Equipment

One (1) 550 bbl water tanks, two (2) each 3 x 4 centrifugal pumps with 25HP AC electric motors

One (1) 285 bbl fuel tank, 2 each 3.5HP 1 x 1 ½ centrifugal pump, 2 each Roper transfer pumps and Winslow duel sock fuel filter system

One (1) utility house with accumulator unit, (1) each Koomey model 80, 5 station, 12-20 gallon bottle (10gallon useable fluid), powered by Koomey triplex pump powered by 10HP electric motor and two air driven pumps

Two (2) Armstrong generators, each generator 300 KW, 480 volts, each powered by an Ideco engine, one AC transformer main rig power KVA 45, one AC Transformer KVA 45 on separate skid, both air cooled and diesel fuel day tank

One (1) Westinghouse control panel, dual generator system with nine (9) breakers

One (1) Quincy piston compressor, model QR390 with 20HP electric motor and 400 gallon receiver tank

One (1) Totco drilling recorder to indicate drilling depth and record rate of penetration, weight of drilling assembly, pump pressure

One (1) drillers instrumentation box with Martin Decker weight indicator, type clipper, Atlas pump pressure gauge, tong line pull gauge, rotary torque gauge

One (1) drillers instrumentation console with control valves for M/B tongs, mud pumps, transmission shifters, rotary table and drawworks hoisting clutch

One (1) lot utility suitcase, with Koomey lines, water lines, steam line, air line and electric cables inside

One (1) Mathey wireline unit with 15,000’ of .092 wire line, 15HP electric motor Two (2) Flapper type float valves (6” & 8”)

One (1) bottom change house with 19 each lockers, benches and insulated with one (2) electric heater and parts room (10’ x 40’)

One (1) top dog house with drillers knowledge box, tool box, electrical outlets, satellite automatic driller type Apollo and 1 each electric heter (10’ x 30’)

One (1) set rig mats, 8’ x 12’ x 6’

One (1) lot of rig lights and wiring

One (1) each of drill collar clamp for 9-1/2” and 6-3/4” drill collars

Four (4) pipe racks, 28’ length x 43” high

Price:  $6,300,000

 

OIME TBA 2000 (Ref#1395N)  OIME TBA 2000 drawworks, Baylor Brake Model 6032, Compound, 4 rig engines skidded, (3) CAT D-398 drive engines, (2) Mud pump-Continental Emsco CE1000, (1) Gardner Denver PZ-9, (5) Mud tanks, Suction tank, trip tank, mixing skid, Shale shaker, mud house, (2) Desilter/Desander, (2) Generator houses with CAT 3412 generator sets, Electrical shack, (2) Diesel tank, (3) Water tank, (5) Piece rig mat, (2) Derrick section, Crown assembly, Racking boards, Lower Mast Section, (4) Pieces for substructure, Travel blocks/Skid, Rotary Table, Floor plate sections, Dog House Building, Catworks, Catwalk, Assorted plumbing and piping, Rig Suitcase, (3) Pipe racks, Camp building (Kitchen, Diner, Recreation Room, Manager and Mechanic office), Camp generator set and (2) CAT 3304 diesel engine, Drill line stand, D398 diesel engine, spool 1 Ό” drill line, Kelly in scale, Hose Basket, Tubular.  A more complete inventory will be available soon   Price: $4,000,000     Located in SE Asia.

 

O.I.M.E. (2000 HP) HELI RIG COMPONENTS  (Ref#15360b)  2 available, 1-1/4” drill line, O.I.M.E. drawworks and control system, Lee C. Moore 136’ x 670,000# mast, racking board, 27-1/2” rotary tble, Lee C. Moore sub, V Door and stairs, O.I.M.E. H700 mud pump and Cat D343 diesel engine,Ideco travelling block with 360 ton hook, National N845 swivel  Price:  $1,350,000

 

 

OIME E-3000  (Ref#2059N)

Substructure, Derrick and Accessories

Substructure:  Parco Raised Floor, 57’ x 43’ x 32’ – 34’ ground level to kelly bushing, setback capacity 975,000#, total capacity 1,500,000#

Substructure accessories:  catwalk, V-door deadline anchor

Derrick:  146’ Park 1,500,000# static hook load (14 lines), racking capacity approx 400 stands (triples)

Crown Block:  (7) 60” sheaves, (1) 72” fastline sheave

Air Hoists:  (1) air motor 10,000#, (1) Ingersoll Rand 10,000#

Tongs

Casing Stabbing Board

Pine Spinners: Gray Mark 10

Derrick accessories:  ladder, standpipe, tong counter weights, racking board, Geronimo line, lights in derrick and rig floor

Lifting and Drilling Equipment:

Drawworks skid 27’ x 9.25”, power skid 27’ x 10’, Model OIME E-3000 3000hp, Elmagco 7838 Electric aux brake, driller’s console, Crown-o-Matic, (3) EMD D79 electric traction motors, Foster catheads

1-1/2” drilling line, drilling line spool

Ideco 750 ton travelling block

BJ Dyna-Plex 750 ton hook

Continental Emsco LB650 650 ton swivel

Ideco LR-375 rotary table, 37-1/2” opening, master bushing, kelly bushing

650 ton x 144” elevator links

International Tool Company kelly spinner

High Pressure System

Mud pump:

Continental Emsco FB-1600, 1600 hp triplex, (2) GE 753 DC electric motors

Continental Emsco FB-1600, 1600 hp triplex, (2) EMD D79 electric motors

Gardner Denver PZ-10, 1350 hp, power GE 752

Charger Pump:  (3) 6 x 5 x 11 w/75 hp electric motors

Standpipe manifold

Low Pressure System

Shale tank:  570 bbl, 40’ x 12’

Intermediate tank:  570 bbl, 40’ x 12’

Suction tank:  570 bbl, 40’ x 12’

Trip tank:  130 bbl

Premix pit:  100 bbl

Solids Control Equipment:

(2) Derrick L148 flo-line linear motion

(2) Mission Magnum 5 x 6 75hp centrifugals

Desander:  Totco (2) 12” cones

Desilter:  Total (12) 4” cones

Degasser:  Swaco vacuum

Pit Stirrers:  (5) 10 hp stirrers

Mud Mixing Pumps:  (3) Mission Magnum 5 x 6 100hp centrifugals

Water tanks:  (1) 500 bbl 43’ l x 10’ w – rectangular.  (1) 500 bbl 35’L x 10.5” dia – cylindrical.

20,000 gal diesel tank, 43’ x 10’

Mud/gas separator:  26’ x 8’ x 72” diameter

Power System

(3) Cat D399TA diesel engines

(3) KATO 1000 kw generators

(1) Gardner Denver 30 hp air compressor

(1) Sullivan Palantek 50 dg air compressor

(1) Quincey 4-cylinder air compressor

Power Systems Houses

(1) Ross Hill 1600 SCR house ()48’ x 11.5’)

(3) Genertor House (43’ x 12’)

(1) Air compressor house (43’ x 10’)

Doghouses:

45’L x 10’W, Matheny Explorer 1600 Surveyros

Off driller side house:  45’L x 10’W

Junk baskets, mud house, rig manager’s house, parts houses, change house, power washer, 3x2x13 centrifugal pump, 30 hp electric motor

Well Control Equipment

BOP Stack:  11” rotation head, (1) Hydril GK 13-5/8 x 10,000# annular preventer, Cameron Type U 13-5/8 x 10,000# double ram preventer, 13-5/8 x 10,000# mud cross, Cameron Type U 13-5/8” x 10,000# single ram preventer, (2) 2” x 10,000# gate valves, (1) 2” x 10,000# chick valve, (1) 4” x 10,000# gate vale, (1) 4” x 10,000# HCR valve

(1) closing unit, 9 station, 300 gallon triplex, air actuated charging pumps

(1) remote closing unit, floor mounted in drillers dwog house

Choke Manifold:  (1) 2” x 10,000# gae valve with pressure gauge, (6) 4” x 10,000# gate valves, (1) 2” x 5,000# adjustable choke, (1) 2” x 5,000# positive choke

Kelly Cock Valves:  lower – size and rating upper

Float Valves – Quantity and Type available

Drilling Tools:  elevators, tongs, slips, safety clamps, casing rabit, bit breaker

Drilling String:

Drill pipe: Range 2:   379 joints of 5”, 19.5 lb/ft, G105, NC50 connection;  46 joints of 5”, 19.5 lb/ft, S-135, NC50 conn

Drill Collars:  24 joints of 6-1/2”, 12 joints of 8”

5-1/4”  hex kelly 46’ with NC50 conn

Bits subs, cross overs

Drilling Instruments:  driller’s console,

Price:  $10,500,000

 

 

OIME 1500 MEHCHANICAL DRILLING RIG  (Ref#2365N)

OIME 1500 HP drawworks us manufactured w/ 3 engine compound w/ c18 CAT engines & transmissions, drillers console & OIME catworks. Pyramid approx. 152ft cantilever mast. 1,000,000 lb gross nominal .21′ split level substructure.

Mud Pumps

·         2 – F 1300 HP triplex mud pumps – New

BOP Equipment

·         1 – 13 5/8″ 5000 lbs annular – New

·         1 – 13 5/8″ 5000 lbs double w/ pipe & blind rams – New

·         1 – 13 5/8″ 5000 lbs single w/ pipe rams – New

·         2 – 13 5/8″ 5000 lbs drilling spools – New

·         1 – 6 station closing unit w/ remote

·         1 – 5000 lbs mud manifold

Houses & Pits

·         1 – top dog house – new

·         1 – 3 pit mud system approx. 1500 bbl. – new

·         1 – 500 bbl. Water tank

·         1 – gen. House complete w/ 2 cat 365 kw. Gen. Sets & air compressor w/ electrical switch gear – new

·         1 – fuel tanik approx. 12,000 gal.

·         1 – bottom dog house w/ lockers and work benches – new

Equipment

·         1 – 27 ½ rotary table w/ master bushing – rebuilt

·         1 – kelly drive bushing – rebuilt

·         1 – 5 Ό hex kelly

·         1 – 350 ton sowa shorty block/hook – rebuilt

·         1 – 450 rainbow swivel – new

·         1 – varco ssw-10 air drill pipe spinner – rebuilt

·         1 – varco 6600 air kelly spinner – rebuilt

·         1 – wire line machine – 1 – gas buster

·         1- air hoist -new

Handling tools (all rebuilt w/ load test or new)

·         1 – set of 2 Ύ” x 108″ elevator links

·         1 – 5″ 350 ton woolley dp elevator

·         1 – 5″ dp slip

·         1 – 5 ½” x 7″ dc slip

·         1 – 6 Ύ” x 8 Ό” dc slip

·         2 – dc clamps

·         1 – set of bj db rotary tongs 5″ – 9″ jaws

Misc. Equipment

·         2 – sets of 42″ pipe racks

·         1 – 2 section cat walk

·         1 – pill tank

·         1 – lubster

LOCATED USA – NOT USED SINCE REWORKED

Price:  $6,800,000

 

OIME SL-9 S/D  (Ref#2437Ra)  OIME SL-9 S/D Drawworks 1500 H.P. LEBUS Grooved f/ 1-1/4” Line, Driller’s Console, PARMAC 342 Hydromatic Brake, p/b (3) CAT C-18 Diesel Engines., w/ ALLISON Trans, OIME Catworks Rotary Drive Unit; PYRAMID 146’H x 23’W, 815,000# SHL Mast w/ PYRAMID 22.5’H Swing Up Substructure w/ V-Door & Catwalk; (1) CAT 600 KW Gen Set p/b CAT 3412 (1) CAT 545 KW Gen Set p/b CAT C-18, GD Air Compressor Mtd in Gen House, Spare CAT 600 KW Gen Set p/b CAT 3412; SKYTOP BREWSTER B-1300T, 1300 H.P. Triplex p/b CAT 3512; OILWELL PT-1100-A, 1100 H.P. Triplex p/b CAT 3508; HACKER PYRAMID 275 Rotary Table; NATIONAL 500 Ton Swivel; 5-1/4” Hex Kelly w/ Drive Bushing & Hyd. Kelly Spinner; SENTRY 350-Ton Block/Hook Combo; HYDRILL GK11”, 10M Annular BOP, CAMERON Type U, 11”, 10M Dbl. BOP, 6-Station Closing Unit; CAMERON Choke Manifold w/ Super Choke; ALBERTA 12’W x 54’L Office/Pusher House; 8’W x 38’L Drillers House; 10’W x 48’L Parts/Change House; 12’W x 40’L Mud House w/ (5) 5x8 Cent Pumps; (3) Pit 1800 Bbl Mud System Complete w/(8) Mud Agitators, (5) 5x6 Cent Pumps, Radicon Mud Mixers, (2) Linear Shale Shakers, SWACO Desander & Desilter; 10’W x 40’L 400 Bbl. Water Tank; 8’W x 33’L 12,300 Gallon Fuel Tank; Hyd. Pipe Spinner, Hyd. Winches, Air Winch, Elevators, Slips, Elevator Links, Hand Tools, Power Tools, TOTCO 700,000# Weight Indicator & Misc. Rig Parts & Wind Walls, Currently Drilling  Price:  $7,500,000

 

TFI-1000M  MECHANICAL 1000 HP DRILLING RIG  (Ref#8022N)

Manufactured 2006 – refurbished:

Installation of new drawwroks, upgraded to 1-1/4”drill line

Mud system modification to allow close loop circulation option

Engineering study to increase mast height to 139’, increasing hook load from 550,000# to 660,000# and allowing for a wider range of top drive options

Rebuilt or serviced all ancillary equipment

The rig was built in 2006 to drill in the Barnett Shale play where it drilled both vertical and horizontal weels of depths from 9000 TVD with laterals from 3000-5000’.

DRAW WORKS

Drilling Unit:                          TFI-1000M 1000hp mechanical DW.

Compound:                          TFI double engine in line compound.

Engines:                                Two (2) CATERPILLAR C-15 Diesel engine-Electric Start-Radiator-Gauges-TWIN DISC F-11561-TC Torque converter

Brake:                                    Eaton Disc Brake

DERRICK

Mast:                                      BHL 131’H Cantilever

Static Hook Load:                550,000 Lb.

Crown Block:                        (5) Sheave Cluster & (1) Fast line Sheave grooved for 1 Ό” line

Other:                                     Racking Board, Tong Counterweights, Ladder, Derrick Climber, 4” Standpipe & Manifold.

SUBSTRUCTURE

Type:                                      Shop built 22’W x 19’ H x 49’ L Box Substructure, w/ Pony, Rotary Beams, V-door ramp, (3) Stairs, Safety Rails, (2) 200 gal. Air Receiver Tanks, Skidded.

ROTATING EQUIPMENT

Rotary table:                         27 ½ “ National Rotary Table w/Split Master Bushings

Swivel:                                   National N-69 300 Ton

Kelly Spinner:                       INTERNATIONAL TOOLS Model OWI 1500

Other:                                     5 Ό” X 45’ Hex Kelly and VARCO Kelly Drive Bushing, w/Rollers

TRAVELING EQUIPMENT

Block:                                     CONTINENTAL-EMSCO RA-36 250 Ton Block/Hook Combination, 108” Elevator Links

INSTUMENTATION

BEAR 500,000 Lb. Weight Indicator

Satellite Automatic Driller

STAR 3-Pin Recorder

O’DRILL Type D 5000 Psi. Mud Gauge.

HANDLING TOOLS:

OWI 35C7 Pipe Spinner, Chain Drive

WEB WILSON Type B Rotary tongs with assorted heads

BYRON JACKSON MGG 5” 250 T. Drill Pipe Elevators

BYRON JACKSON MMG 6” 150 T. Drill Collar Elevators

5” Drill Pipe slips, 12 segment Drill Collar Slips.

(2) Sets Drill Collar Safety Clamps, Mud Bucket

WATER TANK:

SHOPBUILT 9’W x8’H x40’L, 494 Bbl. Water Tank. Skidded.

(2) MCM 1 ½ “x2” Centrifugal Water Pumps, p/b 5hp. Elec. Motors.

SHOPBUILT 4’W x4’H x6’L Lubester w/(3) Compartments, Mounted on 35’L x8’ W Junk box.

RIG HOUSES

Upper Doghouse                 Shop built  8’ W x20’ L w/(6) lockers, Bench Storage, Cabinets, Microwave, Heater, Lights

Lower Doghouse:                Shop built 8’ W x 40’ L Parts/Change house, w/ (12) Lockers, Shelves, Workbench, Benches, Heater, Lights, Skidded.

Utility House:                        Shop built 10’ W x40’ L Utility House w/ (2) 15’ L Covered Porches, Lights, Skidded.

GENSET

Generator No. 1:                  DMT - 670C 600Kw. AC Generator, p/b CATERPILLAR 3412 Diesel Engine, w/ Electric Start, Fuel Day Tank, Radiator, Gauges.

Generator No. 2:                  LIMA 625 Kw. AC Generator, p/b CATERPILLAR 3412 Diesel Engine, w/ Electric Start, Fuel Day Tank, Radiator, Gauges.

CURTIS RS30B Rotary Screw Air Compressor p/b 30 Hp. Electric Motor, Mounted on 130 gal. Air Receiver Tank.

GENERAL ELECTRIC Electrical Panel

FEDERAL PACIFIC 45 Kav. Transformer

SHOPBUILT 10’ W x40’ L Utility House w/ (2) 15’ L Covered Porches, Lights, Skidded.

ELECTRICAL SUITCASES (10)

MUD PUMPS

Pump:                                    Two (2) F.E.S. MZ-9 1000HP Triplex Mud Pumps w/ Forged Steel Fluid Ends, Quick Change Caps, 5000 Psi. Pulsating Dampener, MISSION 5”x6” Centrifugal Charging Pump. O’DRILL 3” Shear Relief Valve, O’DRILL Type D 5000 Psi. Pressure Gauge, Master Skidded w/ engine.

Pump power:                        Two (2) CATERPILLAR D-398 Diesel Engine w/ Air Start, Radiator, Gauges, Mounted Pump Master Skidded  

MUD SYSTEM

Suction Tank:                       Shop built 10’ W x6’ H x40’L, 411Bbl. Suction Tank w/6’L Covered Porch, (3) Compartments, (2) MAXX 2000 7.5 Hp. Mud Agitators, Internal Plumbing, Flat Bottom, Top Mounted Walkways, Safety Rails, Stairs, Lights, Skidded.

Shaker tank:                         SHOPBUILT 10’ W x6’ H x40’L, 411 Bbl. Shaker Tank w/ 6’L Covered Porch, (3) Compartments, (2) MAXX 2000 7.5 Hp. Mud Agitators, Internal plumbing, Flat Bottom, Top Mounted Walkways, Safety Rails, Stairs, Lights, Skidded.

Shale shaker:                       Dual VORTEX ORBITAL 3000, Single Screen, Linear Motion Shale Shaker

De-sander:                            BAKER 5” X6” Centrifugal De- silter Pump p/b TESCO 50 Hp. Elec. Motor, VORTEX De sander w/ (2) 10” Cones.

De-silter:                                BAKER 5” x6” Centrifugal De-silter Pump p/b TESCO 50 Hp. Elec. Motor, VORTEX De- silter w/ (6) 2” Cones

Mixing:                                   Two (2) BAKER 5” x6” Centrifugal Mixing Pumps, p/b TECO 50 Hp. Electric Motor.                            

WELL CONTROL EQUIPMENT

Annular:                                 Regan Type K Annular BOP, 11” X 3,000 Psi.

BOP:                                       Cameron Type U Double Blowout Preventer 11” X 5,000 Psi. w/ 5000 X 3000 Psi Drilling Spool.

Closing Unit:                         CPC 4-Station Closing Unit w/ triplex Pump, powered by TECO 20hp.Elec.Motor, (2) Air Pumps, 145 gal. Reservoir Tank, (12) bottles, Gauges, Lights, Mounted on 6’W x 12’L Skidded

Remote unit:                         4-station Remote Closing Unit-Mounted on Doghouse Porch

Manifold:                               JMP 5,000 Psi. Choke Manifold w/ (1) 5 way Cross, (2) 3 1/8”x 5M Gate Valves, (5) 2 1/16”x 5M Gate Valves,(2) 2 1/16” Adjustable Chokes, O’DRILL Type D 5M Pressure Gauge, Skid Mounted.

Kill Line:                                Two (2) 2 1/16”x 5M Gate Valves

Choke Line:                          Two (2) 3 1/16” x 5M Gate Valve

ANCILLARY EQUIPMENT

Catwalk:                                SHOPBUILT 5’W x42”H x48’L Single Section Catwalk w/Steel Deck

Pipe racks:                            Four (4) Sets of 42”H x28’L Pipe Racks

                                                One (1) Set of 36”H x 28’L Pipe Rack

                                                One (1) Set of 10”H x 28’L Pipe Rack

Hoist:                                      Two (2) JOY 4000Lb. Air Hoist

Fuel tank:                              SHOPBUILT 8,000 gallon fuel tank with lubester w/(3) compartments skidded

3750ft. 1 Ό” New Drilling Line

3 ½ “ x60’L Rotary Hose

3 ½ “x20’L Vibrator Hoses

(2) 8” x10’L Suction Hoses

Rat hole and Mouse hole .(9 5/8” Dia. Mouse hole)

Florescent and Mercury-Vapor Rig Lights

Miscellaneous Fire Extinguishers, Spare Parts, Hand Tools, Etc.

Drilling Collars

25 Joints 6 Ό” OD* 31’, 4 ½ XO, 99lb per foot, Slick Collars and Hard Band

Available for lease or sale         Price:  $6,800,000


 

CROWN 1000 HP MECHANICAL SKID MOUNTED DRILLING RIG  (Ref#14886N)

Assembled and manufactured in 2007/2008 (Brand New)

118’ x 440,000# mast, racking board, makeup and breakout assembly

Crown CE1000SD singel drum drawworks (rated for 1000 hp)

(2) Detroit diesel Series 60 diesel engines

(2) Allison S5610H transmission

Crown 2-engine compound, right angle gearbox, air system, fuel system

12,000# winch, 8,000# winch, deadline anchor, drill line spool rack 3000’ of 1-1/4” line capacity

Substructure: 6.85m (22.4ft) floor height

Hook/block, elevator links, swivel, 27-1/2” rotary table, rotary drive system, rotary torque indicator

Torque wrench and spinner

(2) WS-1000 Quadraplex 1000 hp mud pumps with Detroit diesel engine, mud tanks, mud shaker, desilter, mud agitator, vacuum degasser, centrifugal pumps, trip tank, shaker/cutting tank

Driller’s cabin

BOP control unit 27 accumulator @ 10 gal (38l), 3000 psi working pressure, 4500 psi test pressure

3-1/8” API 5,000 choke manifold550 kVa electric generator, 50 Hz, 400/230V, Volvo Penta 6 cyl engine

400 kVA electric generator, 50 Hz, 400/230 V, Volvo Penta engine

Drill pipe:  3100m 3-1/2”, 2010m 5”, 1000m 2-7/8”

Rig is rigged up in Europe.  Drilling began, but project was shut down

Price   €4,600,000 EUROS

Example of shipping costs:

36 truck loads, volume 1750 cubic meters, weight 450 ton

Shipping costs includes, loading and trucking to Hamburg Port, ocean freight to Libya (including unloading)

The loads are 6 open top flat racks, 8 container loads, 22 positions on ship

Shipping to Libya is €340,000

Shipping to Salvadore €267,500  (service every 14 days;  transit time 20 days

 

CROWN/DUKE CE1000SD 1000HP DRILL TO 13,500’  REF#797R

Drawworks
Crown/Duke CE1000SD 1000 HP rated to 13500ft with 4 1/2in Drill Pipe grooved for
1 1/4in drilling line
Power:
2 Detroit Series 60 Engines 505 HP each at 2100 RPM
Mast and Substructure
Crown guyed & telescoping 118ftH x 19ft 6in W 440000 lb Static Hook Load with skid mounted manually raised telescoping substructure 16ftH x 21ft 6in W 15.0 KB
Triplex Mud Pump:
2 MZ 1000 1000 HP Pumps each driven by two 2 Detroit 60 Series Engines 565 HP each
Rotating and Traveling Equipment:
Hacker Pyramid 20 1/2in x 44in Rotary Table
Mc Kissick 265 Ton Block Hook
Skytop 250 Ton Swivel
ABB Offshore Crown Block Saver
Oilworks Kelly Spinner and Pipe Spinner
BOP Equipment:
-Hydril GK, 11” x 5,000 psi Annular BOP
-Shaffer LWS, 11” x 5,000 Double Hydraulic BOP
-Koomey Type 120, 6 Station, 120 Gallon Accumulator with Remote Panel
-5,000 psi Choke Manifold
Generators:
(2) Detroit Series 60 Diesel Engines with 375 KW Generators in Utility House with (1) Sullair Air Compressor and (1) IR 80 Gallon Air Compressor
Mud System:
-(1) 750 Bbl, two (2) Tank Mud System, 10’ x 54’ x 7-8” with agitators
-(2) Swaco Mongoose high G Linear Shale Shakers rate to 650 gpm
-(1) Swaco 10 Cone Desilter
-(1) Swaco 2 Cone Desander
-(5) Swaco Mud Agitators and (5) low pressure mud guns
Drill Pipe and Drill Collars:
-12,5000’ 4-1/2”, 16.60 lb/ft G-105 Drill pipe with XH Connections
-(18) 6-1/2” OD x 2-1/4” ID Drill Collars with 4-1/2” XH Connections
-(3) 8” OD x 2-13/16” ID Drill Collars with 6-5/8 Regular Connections
PRICE:  $6,800,000

 

CROWN/DUKE CE750SD  (Ref#2930Na)

Drawworks:  Crown/Duke CE750SD (900 HP), Rated to 11,500' with 4 1/2" Drill Pipe

Power: (2) Detroit 60 Series engines, 540 HP Each @ 2100 RPM

Mast and Substructure:

Crown (guyed I telescoping), 118' H x 19'6"W, 375,000# SHL, w/Skid mounted Manually raised telescoping substructure -18'H x 21 '6" W (15.0' KB)

Pump #11 #2: MZ - 9 (1000 HP) Triplex Pumps - Each wI Caterpillar 3508 (1000 HP)

Rotating and Traveling Equipment: Hacker Pyramid 20-1/2" x 44" Rotary Table

American Block 200 Ton Block, American Block 200 Swivel, ABB - Offshore Crown Block saver

B.O.P. Equipment:   Horn Spherical, 11" 5000 PSI Annular BOP Horn L WS, II" 5000 PSI Double Hydraulic BOP

Koomey Type 120, 6-Station, 120 Gallon Accumulator wIRemote Panel 5000 PSI Choke Manifold

Generators:   (2) Caterpillar CE 15 w/375 KW Generators, (1) Both In Utility House W/Atias Copco Air Compressor

Mud Systems:  (1) 750 Barrel (Two Pit) Mud System, 10" X 54" X 7'8" with agitators (1 ) - Derrick High G Linear Shale Shaker, (1) - Derrick 10 Cone Desilter, (1) - Derrick 2 Cone Desander

Drill Pipe and Drill Collars:  Approx. 11,000' 4 1/2" XH, Grade G 16.60# Drill Pipe, (18) -6 1/4"OD x 2 1/4"ID Drill Collars with 4-1/2" XH Connections

Price:   $8,350,000

 

 

2008 CROWN DUKE SS750 (Ref#2437Rg) Carrier Mtd. Drilling Unit, p/b DETROIT Series 60, 14 Liter Diesel Eng., Hyd. Raised & Scoped 118’H x 350,000# Mast; Hyd. Raised Substructure Rotary Beams, Stairways, Safety Rails w/ SALEM 27-1/2” Rotary Table; (2) 400 KW Gen Sets Ea. p/b DETROIT Series 60 Diesel, Gen House, Skidded; (2) MPZ-9 Triplex Mud Pumps Ea. p/b CAT C-27 Diesels w/ Changing Pumps, Skidded; Fluid Design Solutions 150-Ton Top Drive & Power Unit p/b CAT Diesel Eng., Controls, Hoses & Track; (2) Pit 750 Bbl Mud System w/ (2) 50 HP Mixing Pumps, (2) NOV High G Shale Shakers; Driller House, Change House/Parts House; 300 Bbl Water Tank; Center/ Drill Collar Tub/Catwalk; (5) Pipe Tubs; (3) Sets Pipe Racks; 50’L T/A Parts/ Tool Trailer; KOOMEY 4-Station Closing Unit; Hyd. Pipe Spinner, WASHINGTON Rotating Head, Pipe Handling Tools, Slips, Elevators, Tongs, Matting Boards (NOTE: This Rig was Put Into Service Sept. 2009, Finished Drilling Last Hole June 25, 2012)  Price:  $3,500,000

 

CROWN/DUKE CE750SD  (Ref#2930Nb)

Drawworks:  Crown/Duke CE750SD (900 HP), Rated to 11,500' with 4 1/2" Drill Pipe

Power:   (2) Caterpillar CE 15 engines, 540 HP Each @ 2100 RPM

Mast and Substructure: Crown (guyed I telescoping), 118' H x 19'6"W, 375,000# SHL, w Skid mounted Manually raised telescoping substructure -16'H x 19'6" W (13.0' KB)

Pump #11 #2: MZ - 9 (1000 HP) Triplex Pumps - Each wI Caterpillar 3508 (1000 HP)

Rotating and Traveling Equipment: Hacker Pyramid 20-1/2" x 44" Rotary Table

American Block 200 Ton Block, American Block 200 Swivel, ABB - Offshore Crown Block saver

B.O.P. Equipment: Horn Spherical, 11" 5000 PSI Annular BOP Horn L WS, II" 5000 PSI Double Hydraulic BOP

Koomey Type 120, 6-Station, 120 Gallon Accumulator wIRemote Panel 5000 PSI Choke Manifold

Generators: (2) Caterpillar CE 15 w/375 KW Generators, (1) Both In Utility House W/Atias Copco Air Compressor

Mud Systems: (1) 750 Barrel (Two Pit) Mud System, 10" X 54" X 7'8" with agitators (1 ) - Derrick High G Linear Shale Shaker, (1) - Derrick 10 Cone Desilter, (1) - Derrick 2 Cone Desander

Drill Pipe and Drill Collars:

Approx. 11,000' 4 1/2" XH, Grade G 16.60# Drill Pipe

(18) -6 1/4"OD x 2 1/4"ID Drill Collars with 4-1/2" XH Connections

Price:  $8,350,000

 

DRACO 700UE (Ref#1493N)  Incomplete rig, Draco 700UE drawworks w/ 752 electric motor, V80 hydromatic brake, Draco 131’ x 350,000 mast L.C. Moore, 20’ box on box substructure, 250 ton hook/block, 20-1/2” rotary table, Catwalks step, rails   Price on Request

 

BW SELF PROPELLED (Ref#1474N)  Fully equipped Canadian rig

Carrier:  BW Self Propelled Tandem/drive

Engine:  Detroit Diesel 6TV92

Derrick:  17.4 m 55,000 DaN

Tubulars:  Range III Capacity

Hydraulic Top Drive:  8000 Foot Pounds @165 rpm

Fuel Capacity:  Day Tank

Depth Rating:  1,700 m

SUBSTRUCTURE

Dimensions 16.25 m Long x 3.61 m Wide

Lift:  Hydraulic Ramp

Hydraulic Loading Arm: Drill pipe and collars to 275 mm

KB:  3.70 m

BLOWOUT PREVENTERS-CLASS III

Annular Type:  Townsend 84 229 mm 21000 kPa

Single Gates (2):  Townsend 88 229 mm 21000 kPa

NACE trimmed:  Yes

DOG HOUSE

14,000 L fuel

HYDRAULIC PIPE TUBS

Number:  2

Catwalk:  Yes

Pipe Racks:  2 Sets

MUD PUMP

Type:  National Oilwell K-380

Rated 375 HP

Liner:  140 mm x 356 mm Strokes

Fuel:  Day tank

MUD TANK

Capacity:  40 m3

Shale Shaker:  DFT 500 b-2 linear

Mud Mixing:  Centrifugal Mission Pump

BOP Manifold:  75 mm x 50 mm 21,000 kPa

DRILL PIPE (UPSET)

Joints:  155

Size:  102 mm

Length:  Range 2

Connections:  3 1/2" x XH

DRILL COLLARS

Joints:  10, 4

Size:  120 mm, 162 mm

Length:  Range 2

Connections:  3 1/2 IF, 4.5" x XH

COMBINATION BUILDING

Water:  35 m3

Fuel:  Day Tank

Change House:  Yes

Light Plant:  200 KW Generator

Accumulator:  Koomey 4 Station 300L

MOUNTED AIR COMPRESSOR

NO

BOILER

Horse Power:  80

Water:  16 m3

Fuel: Day Tank

TOOL PUSH SHACK

3 m wide x 13.68 m Long

LOADS

Summer:  9

Winter:  10

Price On Request

 

3000HP UPETROM F400 ECY DRILLING RIG (Ref#6798N)

DRAWWORKS

Drawworks – Upetrom  TF-44ECY  complete Hydromatic Brake, overrunning clutch, long grooved drum, hard surfaced water cooled brake rims, and remote brake control system. 6x7 sheave’s, line diameter; 35mm/ 47mm.   Total Capacity rated 3000 HP

             Number of lines afferent  to handling system 12

             Hoisting speed 4+4R, 19.6m/s

             Max Line Pull 49 tons

             Weight 37,790 kg

TOP DRIVE UNIT

Top Drive MPL275 (700mm) unit, Hydraulic driven Upetrom build. Water-cooled rotor.

Static load 500 Ton. Speed 300 RPM.

Hydraulic Pump electric driven.

SUBSTRUCTURE AND MAST

Substructure elevation, from drilling floor 8 meters

Total can be lifted higher by skid construction.

Mast, “A” Type frame, M-400 , 44meters high and has a capacity of 500 tons

It special design allows it to be erected by draw works. It is for low maintenance galvanized.  

MUD PUMPS

Two (2)  Upetrom Duplex pump Type 2PN-1300 E, with forged steel fluid ends mounted on skids.

1300 HP Operating power, 1,105 HP Hydraulic Power.

Max Discharge  Pressure; 350 Bar / 5000 PSI

Max flow rate 3,080 l/min, 814 USGPM, number of double strokes 65 ds/min

TRAVELING BLOCK, HOOK AND SWIVEL

Block  Upetrom  500 Ton

Hook  Upetrom 6x35 MCA 500 Ton

Swivel Upetrom CH400, 400 Ton static load , Max  pressure Threaded 300 Bar/ 4,285 PSI.

COMPRESSORS

3x  (2x2 ECIOE) Upetrom

MUD CLEANING SYSTEM

Mud Cleaning System  Capacity 630 meter cube                2 x Active tanks of 70 meter cubes  each

3x Suction Tanks of 70 meter cubes each                             1x Cleaning tank of 43 meter cubes

1x Sand trap of 38 meter cube                                                 1x Sludge tank of 70 meter cube

2x Water tanks of 45 meter cube each                                   3x Chemical  tanks of 30 meter cubes

20x Agitators of  meter cubes                                                   3x Shale shakers

Desander 4x 8                                                                             Desilter 2x 12

1x Degasser                                                                                 1x Mud manifold

Mud Control System                                                                   Electrical Stack

7x electromotor                                                                            Powerpack 2x Caterpillar 34/5

2x Transformer 1600KW                                                           2x Transformer 630 KW

Blow out control

Manifold

Price:  $11,200,000

 

 

 

 

Tel:  516-536-7375          Fax:  516-536-7317         rigs@sunmachinery.us