SUN MACHINERY CORP

Telephone: (516) 536 7375 Fax: (516) 536 7317

These rigs are located at various locations through out the USA and Internationally.

e-mail: rigs@sunmachinery.us

GARDNER DENVER 700, 500, MID CONTINENT, UNIT

GARDNER DENVER 1500-E 15,000’ DRILLING COMPONENTS REMOVED FROM OFFSHORE RIG (Ref#M831)

(3) EMD 12-645-E1 diesel engines (1500 hp_, (1) Cat D353 diesel engine (435 hp, 1200 rpm) with GE 300kw AC generator

Lee C. Moore 142’ x 30 x 30’, 1,200,000# hook load derrick

Gardner Denver 1500E drawworks powered by (2) EMD D-79-MB 800 hp motors with 6032 electric brake

Oilwell 37-1/2” rotary with 2-speed transmission powered by EMD-79-MBG 800 hp motor

Oilwell 500 ton block with 6 x 60 sheaves grooved for 1-3/8” drill line

BJ 5500 Dynaflex hook 500 tons

Oilwell PC 500 swivel rated for 500 tons

Gardner Denver PZ10 triplex mud pump 1350 hp powered by (2) EMD D-79-MB 800 hp motors

Solids control system: (2) Derrick Floline shale shakers, (1) Derrick Floline mud cleaner, (1) Swaco GEXC degasser with 5 hp vacuum pump

10,000 psi Quality Valve 33 choke manifold with for H2S service, 10 x 3”, 10,000 psi manual gate valves, 3 x 4” 10,000 psi gate valves, (1) Swaco hydraulic adjustable choke, (1) adjustable choke

Price: $1,100,000

GARDNER DENVER 2100E DRAWWORKS (REF#5277R) Removed from off-shore rig, 2500hp, hook load less than 913,000#, electric controls, Located Texas PRICE: $65,000

GARDNER DENVER 700 (Ref#5057N) DRILLING DEPTH 12,000 FT.

DRAWWORKS: GARDNER DENVER 700 SINGLE DRUM DRAWWORKS, DRILLERS CONSOLE, CATHEADS, GROOVED FOR 1 1/8” WIRE ROPE 341 HYDROMATIC BRAKE W/ TWO ENGINE COMPOUND DRAWWORKS POWERED BY TWO CATERPILLAR 3406 DIESEL ENGINES WITH -0- HRS. OR LOW TIME.

DERRICK 136 FT. 650,000 SHL W/ 21 FT. LEG-SPREAD. 5-48” SHEAVES & 1- 56” FASTLINE SHEAVE. BOOM POLE, DERRICK SHOES, RACKING BOARD FOR 12,000 FT. 4 ½” DRILL PIPE. (NEW)

SUB BASE 10 FT. HIGH X 28 FT. WIDE X 46 FT. LONG CONSISTING OF TWO SUB BOXES 7’ 10” WIDE WITH SPREADERS AND SET- BACK & ROTARY BEAMS, THREE SETS STAIRS, V-DOOR AND HANDRAILS (NEW)

PONY SUB 7’ X 10” WIDE X 8’ FT. HIGH X 46 FT. LONG (NEW)

MUD PUMPS TWO (2) F-1000 EMSCO TYPE (CHINESE BUILT) W/ MASTER SKID, PULSATION DAMPNER, BULL WHEEL, WITH TWO CATERPILLAR 3512 DIESEL ENGINES. (NEW MUD PUMP W/ -0- HR ENGINES OR VERY LOW HOURS DEPENDING ON AVAILABILITY.

BLOCK/HOOK 250 TON SHORTY/BLOCK HOOK GROOVED FOR 1 1/8” (NEW) BUILT IN CHINA

ROTARY TABLE 27 ½” X 53” C 275 BUILT IN CHINA (NEW)

SWIVEL IDECO TL 200 W/ QUICK CHANGE (REBUILT)

DOG HOUSE 7 FT. 10” WIDE X 9FT. HIGH X 32 FT. LONG WITH PORCH. KNOWLEDGE BOX, SHELVES, BENCHES & 4-LOCKERS. CRIMP STEEL WALLS (NEW)

BOTTOM TOOLHOUSE 7 FT. 10” WIDE X 9 FT. HIGH X 40 FT. LONG WITH SHELVES, LOCKERS (16) CRIMP STEEL WALLS (NEW)

MUD HOUSE 7 FT. 10” WIDE X 9 FT. HIGH X 24 FT. LONG WITH MUD HOPPER. CRIMP STEEL WALLS (NEW) WITH STAND

MUD SYSTEM THREE (3) TANK 1200 BBL. MUD SYSTEM. 7’10 WIDE X 8’HIGH X 34’ LONG WITH 6’ PORCH. MUD TROUGHS, 6” SLANT BOTTTOMS. CONSTRUCTED WITH ¼” CRIMP STEEL WALLS & ¼” BOTTOMS. THREE RUNNER OILFIELD SKIDS PIT SECTION DIVIDERS

GENERATOR HOUSE 10 FT. WIDE X 9 FT. HIGH X 44 FT. LONG. TWO 3406 CAT ENGINES WITH CAT SR4 300 KW GENERATORS. SWITCH GEAR, AIR COMPRESSOR, CRIMP WALL CONSTRUCTION THREE RUNNER OILFIELD SKID. (NEW) WITH NEW ENGINES

DIESEL TANK 10,000 GAL. CAPACITY. SQUARE. CRIMP WALLS WITH OILFIELD THREE RUNNER SKID (NEW)

WATER TANK 500 BBLS SQUARE, CRIMP WALLS WITH THREE RUNNER OILFIELD SKID (NEW)

MISC. CAT-WALK 42” HIGH X 5’ WIDE X 50’ LONG CONSISTING

OF TWO 28’ LONG SECTIONS(NEW)

THREE SETS OF PIPE RACKS (NEW)

ELEVATOR BAILES 108”X 350 TON

TONGS TYPE BJ- B W/ 3 ½” – 10 ¾” JAWS (REBUILT)

SLIPS

ELEVATORS FOR DRILL-PIPE & DRILL COLLARS

5 ¼” HEX KELLY-RECONDITIONED

KELLY BUSHING FOR 5 ¼” KELLY (REBUILT)

CLOSING UNIT 5-STATION 100 GAL. WITH ONE TRIPLEX PUMP & TWO HYDRAULIC AIR PUMPS (REBUILT)

PRICE: $7,350,000

Terms: 10% with order, 50% to be placed in an escrow account to be drawn on as equipment is delivered to rig up yard, 20% at the start of rig up, 20% upon completion and prior to shipment.

UNIT U-40 (1100HP) MECH SKID MOUNTED DRILLING RIG (Ref#1964Nh)

CONDITION RATING: Very Good

DRAWWORKS

UNIT U-40 “Newly Rebuilt”, Single Drum Drawworks, Crown-O-Matic & Driller’s Control Console, Hydraulic Catheads

TORQUE CONVERTER Twin Disc Model 11561-TC

COMPOUND 2-Engine, In-Line Compound, (2) Quincy 325 Air Compressors

BRAKE Hydromatic Brake 22” Double (REBUILT)

ENGINES (2) VOLVO TAD-1830 Diesel Engines, 550-HP, w/ TWIN DISC Fluid Couplings, Total 1100 HP (LOW HOUR)

MAST LEE C. MOORE 131’ x 18’6” 550,000# Static Hook Load Cantilever Mast, Pin-Type, 5 Sheave Crown, Crown Safety Platform, w/ Derrick Stand.

SUBSTRUCTURE 16’H x 46’L Box-on-Box Substructure w/ Rotary Beams, V-Door, Stairs, Safety Rails, Deadline Anchor, Built-In Parts Rooms, Air Receiver Tank, Wiring, Plumbing, Skidded w/ Steam Heaters & Hydraulic Power Units Mounted.

PUMPS

2-MZ-9 Triplex Mud Pumps, 1,000-HP, 6” x 8” Centrifugal Charging Pumps, Master Skidded, Each p/b CAT 398 Diesel Engine, Split Pump House, Skidded

(PUMP #1-GOOD CONDITION, PUMP #2-REBUILT)

ROTATING EQUIPMENT OILWELL 20^1/2”x 53^1/4” Rotary Table, w/ Master Bushing, 250-Ton Rotary Swivel (GARDNER DENVER)

TRAVELING EQUIPMENT McKISSICK 250-Ton Traveling Block/Hook Combination, BAASH ROSS 3” x 96” Elevator Links

WELL CONTROL EQUIPMENT NOTE: 5-STATION CLOSING UNIT, Skidded Mounted in Building w/ Remote Control Panel, Mounted on Side of Doghouse

4-1/16” 5,000# Choke Manifold Mounted in Doghouse Building

RIG HOUSES 10’W x 30’L Round Top Doghouse, V-Crimped Walls, SATELLITE Automatic Driller, 4-Pen Drilling Recorder, Knowledge Box, Lockers, Parts Storage, Skidded

GENERATORS / UTILITY HOUSE

(1) 400-KW Generator p/b VOLVO Diesel Engine

1-600KW-3412 CAT Generator

GARDNER DENVER Screw Type Air Compressor GE Electrical Controls

All Above Mounted 1 10’W x 35’L Round top Utility House w/ V-Crimped Walls & Skidded

MUD SYSTEM

(2) Tank 850-Barrel Mud System, w/ V-Crimped Walls, Mud Agitators, Flow Troughs, Internal & External Plumbing, (2) 5”x 6” Centrifugal Pumps w/15HP Electric Motor, Skidded

1-Linear Motion Shale Shaker

10” 2-Cone Desander

5” 10-Cone Desilter

1-Tank 250 BBL Premix Tank with 2-50HP Pump Packages w/ 5x6 Centrifugal Pumps.

8’W x 30’L Mud House, w/ V-Crimped Walls, Stand, Skidded

WATER / FUEL TANKS

500-Barrel Water tank, V-Crimped Sides, (2) 2” x 3” Water Transfer Pumps p/b 20-HP Electric Motors, Skidded

6,000-Gallon Fuel Tank, V-Crimped Sides, Skidded w/ Fuel Pump & Electric Motor,

3 Compartment Lube Structure

AUXILIARY EQUIPMENT

5,000# Capacity Air Hoist

Pipe Spinners w/ VARCO TW50 Torque Wrenches

Kelly Spinner

Iron Roughneck

15,000’ Electric / Hydraulic Wireline Measuring Unit

3^1/2”x 55’ Kelly Hose, (2) 3^1/2” Vibrator Hoses, Upper & Lower Kelly Valves

42”H x 60’L Catwalk, 3-Sets (4) Pipe Racks

(1) 1/8” x 5000’ Drilling Line w/ Stand, ¼ Spool of Line Remaining

Rig Lights w/ Wiring

20- Sections of rig Matting w/ Lifting Eyes

RIG BOILER

1-150HP Diesel Fired Boiler Package, Steam Heaters, in Steel Skidded Building

(no drill string with rig)

Extensive work done to make rig work ready, including new wiring and lighting, new plumbing (air, fuel, water, hydraulic), all structural repairs to the main components and repairing or replacing ladders, steps, handrails, and sheet metal, repairing, rebuilding and servicing all power units, pumps and drawworks as necessary, doing all cosmetic repairs including sandblasting, cleaning and painting.

Price: $4,425,000

U-34 DRILLING RIG (Ref#15145N) U34 drawworks with hydromatic brake powered by 8V92 Detroit engine, 103’ x 300,000# Lee C. Moore derrick, crown sheave 29” x 1-1/2”, GXN 16” Gardner Denver mud pump skidded and reskidded w/Matco Fluid end powered by 12V91 Detroit engine, 2-piece subbase 6’6”, 2 piece pony sub 43’. (1) 22” x 11’ x 36” Kansas type base, 2-piece catwalk, 100 ton 3 sheave block, Ideal type F swivel with quick change packing, rathole digger complete, Brewster 17-1/2” ball type rotary table, Wilson AAX tongs, 8’ x 20’ doghouse, Shaffer BOP, 10’ x 25’ water tank, (2) pipe baskets, 40’ kelly, kelly bushing, centrifugal pumps, duplex pumps, derrick stand, cone type desander, 4200’ of 4-1/2” x 3’ dril Price: €800,000 (Euros)

U-34 DRILLING RIG (Ref#14234N) Single drum drawwors, 350 hp, grooved for 1” drilling line, Foster makeup and breakout catheads, overrunning clutch, rotary table drive, Parmac 15” triple hydromatic brane, Crown-O-Matic, air driller’s console controls, single engine compound p/b GM Series 60 diesel engine w/starter, radiator, gauges, Twin Disc F-11524-TC-1 torque converter, air clutch, skidded.

Lee C Moore 100’H cantilever mast, crown block w/(3) 30” sheaves, 24” sheave, fastline sheave, 1” line, Crown safety platform, 4” standpipe, standpipe manifold with gate valves, pressure gauge, racking board, tong counter weights, ladder, derrick climber, boom, rig lighting, wiring, mast stand,. 6’H x 18’W x 40’L box type substructure with rotary beams, stairs, safety rails, V-door ramp, deadline anchor, skidded.

National C-250 duplex mud pump 350 hp w/MATTCO steel fluid end with valve covers and cylinder head caps, suction and discharge manifolds, Continental Emsco 3000# psi pulsation dampener, 3” shear relief valve, pressure gauge, mud line, master skidded, p/b Cat D343 diesel engine, 375 hp, w/starter, radiator, gauges, pump drive, air clutch, skidded.

Onan DGFA-3381671 electric generator, 125 kw p/b Cummins 6CTA8.3 disel engine w/electric starter, radiator, gauges, skidded, mounted on 1986 Freuhauf PB100 8’W x 42’L tandem axle flat bed trailer, w/3000 gal fuel tank, propane tank, 2-compartment lubester.

8’W x 30’L doghouse, round top w/3’L porch extension, knowledge box, parts storage, fluorescent lights, heater, wiring, skidded, mounted on 1978 Hobbs 8’W x 42’L tandem axle flat bed trailer.

300 barrel water storage tank, skidded.

Traveling block/hook comination w/(4) sheaves, 1” line

Rotary swivel

Ideco 17-1/2” x 44” rotary table w/master bushing

Kelly drive bushing, 4-1/2” drill pipe slips, drill pipe elevators, 4-1/4” x 41’ L square kelly, elevator links

Drill collar slips, drill collar elevators

Rotary hose, suction hoses, drilling recorder, 1 set pipe racks, assorted changover subs, bit subs, lift subs, rig lighting, wiring connections, vibrator hose, weight indicator, catwalk w/steel deck, 4 drill pipe/drill collar tubs, 1” x approx 3500’ drilling line, approx 5000’ 4-1/2” BN YB drill pipe with 4-1/2 XH connections, (14-16_ 5-5/8” OD – 5-3/4” OD drill collars with 4-1/2 XH connections

Price~~: $1,650,000~~ PRICE REDUCED: $800,000

U-34 DRILLING RIG (Ref#331N)

DRAWWORKS/COMPOUND

MID CONTINENT U-34 Single Drum Drawworks, 350-HP, Grooved f/1” Drilling Line, Foster Make-Up & Breakout Catheads, Overrunning Clutch, Rotary Table Drive, PARMAC 15” Triple Hydromatic Brake, Crown-O-Matic, Air Driller’s Console Controls.

Single Engine Compound, p/b GM Series 60 Diesel Engine, w/Starter, Radiator, Gauges, TWIN DISC F-11524-TC-1 Torque Converter, Air Clutch, Skidded.

MAST/SUBSTRUCTURE

LEE C. MOORE 100’H Cantilever Mast, SHL N/A, Crown Block w/(3) 30” Sheaves, 24” Sheave, Fastline Sheave, 1” Line, Crown Safety Platform, 4” Standpipe, Standpipe Manifold w/Gate Values, Pressure Gauge, Racking Board, Tong Counter Weights, Ladder, Derrick Climber, Boom, Rig Lighting, Wiring, Mast Stand.

6’H x 18’W x 40’L Box Type Substructure, w/Rotary Beams, Stairs, Safety Rails, V-Door Ramp, Deadline Anchor, Skidded.

MUD PUMP

NATIONAL C-250 Duplex Mud Pump, S/N-N/A, 350-HP, w/MATTCO Steel Fluid End w/Valve Covers & Cylinder Head Caps, Suction & Discharge Manifolds, CONTINENTAL EMSCO 3,000# PSI Pulsation Dampener, 3” Shear Relief Valve, Pressure Gauge, Mud Line, Master Skidded, p/b CAT D343 Diesel Engine, 375-HP, w/Starter, Radiator, Gauges, Pump Drive, Air Clutch, Skidded.

GENERATOR

ONAN DGFA-3381671 Electric Generator, 125-KW, p/b CUMMINGS 6CTA8.3-G2 Diesel Engine, w/Electric Starter, Radiator, Gauges, Skidded.

Above Mounted on 1986 FREUHAUF PB100 8’W x 42’L Tandem Axle Flat Bed Trailer, 11R24.5 Tires, Spoke Wheels, w/3,000-Gallon Fuel Tank, Propane Tank, 2-Compartment Lubester.

DOG HOUSE

8’W x 30’L Doghouse, Round Top, w/3’L Porch Extension, Knowledge Box, Parts Storage, Fluorescent Lights, Heater, Wiring, Skidded, Mounted on 1978 HOBBS 8’W x 42’L Tandem Axle Flat Bed Trailer, 11R25.5 Tires.

WATER TANK

300-Barrel Water Storage Tank, Skidded.

ROTATING/TRAVELING/HANDLING EQUIPMENT

Traveling Block/Hook Combination, w/(4) Sheaves, 1” Line (Make/Model To Be Determined)

Rotary Swivel (Make/Model To Be Determined)

IDECO 17-1/2” x 44” Rotary Table, w/Master Bushing 4-1/4” x 41’L Square Kelly

Kelly Drive Bushing Elevator Links

4-1/2” Drill Pipe Slips Drill Collar Slips

Drill Pipe Elevators Drill Collar Elevators

AUXILIARY EQUIPMENT

Rotary Hose Vibrator Hose

Suction Hoses Weight Indicator

Drilling Recorder Catwalk w/Steel Deck

1-Set (2-Each) Pipe Racks (4) Drill Pipe/Drill Collar Tubs

Assorted Changeover Subs, Bit Subs, Lift Subs 1” x Approximately 3,500’ Drilling Line

Rig Lighting, Wiring, Connections

TUBULARS

Approximately 5,000’ 4-1/2” BN YB Drill Pipe, w/4-1/2” XH Connections

(14-16) 5-5/8”OD – 5-3/4”OD Drill Collars, w/4-1/2” XH Connections

Price: $2,100,000

MID-CONTINENT U-34 (Ref#14139) Mid Continent U-34 drawworks, Ideco 17-1/2” rotary table, Cat 3406 diesel engine, Allison TC-955 torque converter, Lee C Moore one-piece substructure, M3 mud tank, doghouse/water tank, Lee C Moore 102’ x 210,000# mast with Tri-Service Crown Price: $550,000 or make offer

UNIT 34 (Ref# 3212N)

1 – 103’ LCM Derrick 300,000 lb Crown 6 Sheave 29” x 1 ½” 6 x 6 5/8” Thick Angle Iron

1 – U34 Draw works w/hydromantic brake powered by new 8v92 Detroit Rebuilt Right Angle Drive Torque Converter New Line

GxN 16” Garner Denver Mud Pump Skidded & Reskidded w/mato fluid end powered by 12v92 Detroit rebuilt with day tank

Two piece sub base 6’6”

Two piece Pony sub 43’ – 1 22” x 11’ x 36” Kansas Type Base

1 – Two Piece Cat Walk 40’ 1 – 100 Ton 3 Sheave Block

1 – Ideal Type F Swivel with Quick Change Packing 1 – Rat Hole Digger Complete

1 – Brewster 17 ½” Ball type Rotary Table 1 – Set Wilson AAx Tongs

1 – 8’ x 20’ Doghouse 1 – Shaffer BOP

1 – 10’ x 25’ Water Tank 1 – Pipe Baskets

1 – 40’ Kelly 1 – Kelly Bushing

1 – 100KW Kato Generator 1 – Centerfugal Pump 20 HP elec.

1 – Duplex Pumps 4 x 6 Wheatley Power 4 cyl John Deer Diesel

1 – Derrick Stank 1 – Desander Cone Type

1 – Tandem Dolly Trailer for Derrick 1 – Set 4 ½” Slips

1 – Bottom Hole Change Over Sub 1 – Mud Hopper

2 – Tanks 100 gal. Oil 1 – 100 gal Diesel Tank

1 – V Door 3 – Sets of Steps

Price: ~~$850,000~~ PRICE REDUCED: $700,000

MID-CONTINENT U-34 SINGLE DRUM (Ref#9003Rc)

MID-CONTINENT U-34 Single Drum Trailer-Mounted Portable Drilling Unit , LEBUS Grooved f/1” Drill Line, Catheads, PARKERSBURG 15” Double Hydromatic Brake p/b C AT 3406 Diesel Engine(0 hrs. overhaul),, TWIN DISC F11524 Transmission, QUINCY 325 Air Compressor, 71’H 180,000# Static Hook Load Mast, Hydraulically Raised, (2) Raising Rams, Racking Board, 3-1/2”ID Rotary Hose, Mounted on Tandem Axle Trailer w/(2) Hydraulic Leveling Jacks, (2) Manual Leveling Jacks, Folding Walkways w/Stairs, Fuel, Air, Water & Hydraulic Tanks, 12.00x20 Tires, Drill Line Spool

SUBSTRUCTURE

· * 10’H x 7’6”W x 35’L T-Type Substructure w/Rotary Beams, V-Door Ramp, Stairs, Safety Rails, 5’H x 33’L 3-Piece Back-On Ramp (Located on Eldorado, Texas Yard)

GENERATOR

· * NEW AGE 125 KW AC Generator, p/b CUMMINS 8.3 Diesel Engine, S/N-N/A, w/Electric Starter, Radiator, Gauges, Skidded, Mounted on 40’L Tandem Axle Float w/8’W x 8’H x 16’L Water Tank, 8’W x 7’H x 5’L Fuel Tank, Electrical Control Panels

MUD PUMPS

· * GARDNER-DENVER FXK Duplex Mud Pump, 255 HP, 7-1/4” x 14”, Forged Steel Fluid End, CONTINENTAL EMSCO Pulsation Dampener, Suction Screen, 2” Shear Relief Valve, Type D Pressure Gauge, V-Belts w/Guard p/b CAT 3406 Diesel Engine, S/N-N/A, w/Electric Starter, Radiator, Gauges, WICHITA Air Clutch, Master Skidded (w/Rig No. 21)

· * GARDNER-DENVER FXK Duplex Mud Pump, 255 HP, 7-1/4” x 14”, Forged Steel Fluid End w/Threaded Caps, Surge Chamber, 2” Shear Relief Valve, Type D Pressure Gauge, Drive Assembly, V-Belts w/Guard p/b DETROIT 6V-92T Diesel Engine, PTO, Master Skidded

ROTATING/TRAVELING EQUIPMENT

· * 17-1/2” x 44” Rotary Table w/Split Master Bushing

· * NATIONAL IDEAL Type L Swivel (Did Not See)

· * 4-1/4” x 40’L Square Kelly w/Mousehole & Shuck

· * BAASH-ROSS Kelly Drive Bushing w/Square Drive

· * UNIT 150-Ton Block w/BJ 460 Hook

· * (2) 2-3/4” x Approximately 84” Elevator Links

WELL CONTROL EQUIPMENT

· * REGAN-Type 8-5/8” 3000# Annular Blowout Preventer

· * 3000# Blowout Preventer Choke Manifold w/(3) ORBIT Valves, (1) Adjustable & (1) Positive Choke

MUD SYSTEM

· * RIGTECH VSM100 Single Screen, Single Vibrating Shale Shaker, p/b Electric Motor

RIG HOUSES

· * 8’W x 40’L Top Doghouse w/Lockers, Bench Storage, Cabinets, Fluorescent Lights, Heater (Locked), Mounted on 40’L Tandem Axle Float

HANDLING TOOLS

· * Type C Rotary Tongs w/Heads

· * BJ 3-1/2” BN Drill Pipe Elevators (Did Not See)

· * WEB WILSON 4-1/2” BN Drill Pipe Elevators (Did Not See)

· * 8-5/8” SD Casing Elevator (Did Not See)

· * VARCO SDL 3-1/2” Drill Pipe Slips (Did Not See)

AUXILIARY EQUIPMENT

· * MARTIN-DECKER 0-380,000# Weight Indicator

· * GEOLOGRAPH Drilling Recorder (Did Not See)

· * (2) Suction Hoses, Pit Jet

· * 36”H x 4’W x 40’L Single-Section Steel Catwalk

PRICE: $400,000

MID-CONTINENT U914C (Ref#2816N) Rig components, Mid Continent U914C drawworks, double drum 900-1400 hp, 1-3/8” line, 48” Parkersburg hydromatic brake, twin disk torque converter 21’ x 1,200,000# six section substructure, 142’ x 1,330,000# 12-line mast, 1,000,000# hook load, 7 sheave crown block, BJ500 TM travelling block and hook, 30 drill collars, (2) 4-1/4” kelly, (3) 4-1/2” elevator, extensive list of subs, located South America Price: $700,000

1500HP RIG PROPOSED INVENTORY (Ref#3045R)

Drawworks~

Mid Continent 914, 1500 HP Drawworks with 6032 or equivalent brake. Drawworks is completely remanufactured with warranty.

Mast~

152’ x 30’ mast rated at 1,000,000 lb. static hook load.

Substructure~

30’ substructure with rotary capacity at 1,000,000 lb. and a setback of 650,000 lb.

Box on Box type Sub.

Pumps~

Three (3) Weatherford 1600 pumps

Independently powered by 752 traction motors.

Pumps complete with all plumbing, pulsation dampeners, and 5x6 charge pumps.

Rig Houses, tanks~

Drillers top doghouse= 9’ H x 8’6” W x 35’L

Mud house= 9’H x 10’ W x 25’ L

Parts house= 9’H x 10’ W x 45’ L

Water Tank= 9’ H x 10’ W x 45’ L with two (2) 2” x 3” centrifugal pumps.

One (1) Fuel tanks

Mudsystem~

Three (3) 8’6” H x 10’ W x 47’ L mudtanks (1500 BBL)

Tanks to have necessary piping, valves, dump gates, & compartments

One (1) SWACO 2-cone desander

One (1) SWACO 10-cone desilter

One (1) SWACO Degasser

Three (3) Derrick 504 linear shakers

Seven (7) mud agitators with 10HP motors

Four (4) 6” x 5” centrifugal pumps with 100HP motors

One (1) Skid Mounted Poor Boy Gas Buster

Rotary Equipment~

One (1) 37-1/2” rotary table

One (1) 500 ton swivel

One (1) Varco type Kelly drive bushing

Traveling Equipment~

One (1) 500 ton block/hook

One (1) set of 3 ½” x 132 elevator links

Well Control~

One (1) Shaffer Style model GK 13-5/8” x 5000 PSI annular

One (1) Cameron type 13-5/8” 10,000psi double ram preventor

One (1) Cameron type 13-5/8” 10,000psi single ram preventor

One (1) Drilling Spool

One (1) 240 Gallon 6 station Koomey style closing unit

One (1) Koomey style remote

One (1) 4 1/8” x 10,000#, 2 1/16” x 10,000# choke manifold

One (1) B.O.P. lines suitcase

Instrumentation~

One (1) Totco type 50 weight indicator

One (1) Electric rotary torque

Three (3) mud pump SPM

One (1) rotary RPM

All above mounted in Totco drilling console

SCR House~

Ross Hill or Equivalent (Availability Issue) 4 generator x 4 SCR system

9’ W x 40’ L x 9’ H house

Power Equipment~

(3) 3512 Cat engines w/1375 KW generators

Generators mounted on 10’ W x 35’ L x 9’ H skids

(2) Gardner Denver 20 HP screw type compressors

(1) Gardner Denver cold start compressor

Auxilliary Equipment~

One (1) Mathey style wireline unit

Two (2) air winches

Misc. (1) Set of handling tools

(1) Powertong

(2) Kelly Spinner

Custom rig up, built to order using new and reworked components

Delivery: +120 days

PRICE: $13,400,000

Add: Letourneau/Tesco/CanRig, 500T Top Drive: $2,300,000 (installed)

Terms: 50% Upon Contract

25% Deposit Upon Mast Raised

25% Balance Due Upon Final Inspection

UNITED 800 DRAWWORKS (Ref#8102Rb)

DEPTH RANGE: TO 12000'

DRAWWORKS: UNITED 800 with (2) Caterpillar D-379 with 575 HP each.Diesel Engines and Torque Converters.

PUMPS: 1 IDECO MM-1625 Duplex Mud Pump, 7-1/4" x 16", with Cat Diesel Power. 1 C-250 National Ideal Duplex with Quick Change Fld End & Diesel Power.

MAST: Lee C. Moore 131ft Mast with 360,000# Hook Load

SUB BASE: 17'H X 19'6" X 50' BOX ON BOX SUB W/14'6" CLEAR HEIGHT ROTARY BEAMS

ROTARY & DRIVE: 17 1/2" X 53" - Rotary Table Chain driven off Drawworks

DRILL PIPE: NONE

DRILL COLLARS: NONE

HANDLING EQUIP: NONE

TOTCO: TO BE FURNISHED BY PURCHASER

AUTO DRILLER: TO BE FURNISHED BY PURCHASER

BOP'S: Schaeffer 11" 5000#, 80 gallons 3000 psi, 4 valve Air powered 1 set 4-1/2" Rams & 1 set Blind Rams.

GENERATORS: 2-500 KW Generators with Cat D353 Diesel Power

WATER TANKS: 2 -500 bbl w/skid mount

SURVEY EQUIP: TO BE FURNISHED BY PURCHASER

MUD PITS: 2 - 8'W X 8'6"H X 40'L OPEN TOP TANK W/MANIFOLDS, SKIDDED, 10' PORCH

FUEL TANK: Diesel tank will be furnished by Fuel Company.

OIL STORAGE: Oil tank will be furnished by Fuel Company.

JUNK BASKET: NONE

AIR HOIST: 1 EA. YANTAJ JQ50x12, 10,000# (NEW) on rig floor.

TOOLPUSHER: No Trailer furnished.

AIR COMPRESSOR: 2 -GARDNER DENVER 390

DOG HOUSE: Top dog house 40' & bottom dog house 40', 1/2 parts house and ½ crew change house.

TRAVELING BLOCKS: DEAL BLOCK W/(5) 36" SHEAVES GROOVED F/1-1/8" LINE W/BJ 4200 HOOK

SWIVEL: Oilwell S6 300-TBD

THE ABOVE EQUIPMENT IS SUBJECT TO CHANGE DUE TO AVAILABILITY

PRICE: $2,300,000

Rig has been rebuilt with used and reconditioned equipment.

U-20 DRAWWORKS (Ref#8102Rc)

DEPTH RANGE: TO 14,000'

DRAWWORKS: U 20, with (2) Caterpillar D-379 with 575 HP each

Diesel Engines and Torque Converters.

PUMPS: 1 IDECO MM MODEL GB Duplex Mud Pump, 7-1/4" x 16", with Cat Diesel Power.

1 WILSON 1250 Duplex w/FS Fluid End, & Cat Diesel Power.

MAST: IDECO Fullview 143'H x 21'W w/ 750,000# Static Hook Load

SUB BASE: 17'H X 19'6" X 30' BOX ON BOX SUB W/14'6" CLEAR HEIGHT ROTARY BEAMS

2 - 6'H X 5'5"W X 42' Pony Sub Section w/Mud Bottom, Skidded

ROTARY & DRIVE: 17 1/2" - Rotary Table Chain driven off Drawworks

DRILL PIPE: NONE

DRILL COLLARS: NONE

HANDLING EQUIP: NONE

TOTCO: TO BE FURNISHED BY PURCHASER

AUT0. DRILLER: TO BE FURNISHED BY PURCHASER

BOP'S: Schaeffer 11" 5000#, 80 gallons 3000 psi, 4 valve Air powered 1 set 4-1/2" Rams & 1 set 5-1/2" Rams & 1 set Blind Rams.

GENERATORS: 2-250 KW Generators with Cat D353 Diesel Power

WATER TANKS: 1 -500 bbl w/skid mount

SURVEY EQUIP: TO BE FURNISHED BY PURCHASER

MUD PITS: 2 - 8'W X 8'6"H X 40'L OPEN TOP TANK W/MANIFOLDS, SKIDDED

FUEL TANK: Diesel tank will be furnished by Fuel Company.

OIL STORAGE: Oil tank will be furnished by Fuel Company.

JUNK BASKET: 1 EA. Junk Basket mounted on 6' x 6' skid

AIR HOSIT: JIANGSU ENGINEERING QJ-5B Air Winch, , 5.5 Ton, New

TOOLPUSHER: No Trailer furnished.

AIR COMPRESSOR: 2 -Quincy 350

DOG HOUSE: Top dog house & bottom dog house (1/2 parts house, 1/2 crew change house.)

TRAVELING BLOCKS: OILWELL 66 BLOCK W/(5) 36" SHEAVES GROOVED F/1-1/8" LINE

SWIVEL: Oilwell S6 300

THE ABOVE EQUIPMENT IS SUBJECT TO CHANGE DUE TO AVAILABILITY

PRICE: $1,700,000

Rig has been rebuilt with used and reconditioned equipment.

U-15 SINGLE DRUM DRAWWORKS (Ref# 9003Rb)

No. Texas U-15 Single Drum Drawworks, LEBUS Grooved f/1-1/8” Line, Catheads, Overrunning Clutch, Driller’s Console, Crown Block Saver, QUADRUPLE 15” Auxiliary Water Brake, 2-Engine In-Line Compound, QUINCY 325 Air Compressor, Above p/b (2) CAT D353 Diesel Engines, NATIONAL OILWELL C-245-30 Torque Converters

MAST/SUBSTRUCTURE

· * LEE C. MOORE 127’H Cantilever Mast, Pin-Type Crown Block w/(5) Sheaves f/1-1/8” Line, 4” Standpipe, Crown Safety Platform, Racking Board, Tong Counterweights, Ladder, Derrick Climber, Mast Stand, Standpipe Manifold w/12’H x 18’W x 40’L Box-on-Box Substructure w/Rotary Beams, V-Door Ramp, Stairs, Safety Rails

GENERATOR

· * CAT 3306 Generator, p/b CAT 3306 Diesel Engine, w/Electric Starter, Radiator, Gauges, Mounted in 10’W x 20’L House, Skidded w/Electrical Control Panel

ROTATING/TRAVELING EQUIPMENT

· * IDECO 17-1/2” x 44” Rotary Table, w/Split Master Bushing

· * MUD KING 200-Ton Swivel

· * 4-1/4” x 40’L Square Kelly w/Mousehole & Shuck

· * VARCO-Type Kelly Drive Bushing w/Square Drive

· * McKISSICK Fig. 664 150-Ton Block/Hook Combination, w/WEB WILSON 150-Ton Hook

· * (2) 3” x Approximately 84” Elevator Links (Did Not See)

WELL CONTROL EQUIPMENT

· * REGAN 10-3/4” 3000# Annular Blowout Preventer

· * 3000# Blowout Preventer Choke Manifold w/(4) ORBIT Valves, One Choke

2-PIT MUD SYSTEM

· * 6’H x 7’6”W x 40’L Mud Suction Tank w/(3) Compartments, Internal Plumbing, (2) Mud Agitators, Top-Mounted Walkways, Stairs, Safety Rails, Skidded

· * MCM 4” x 5” Centrifugal Pump p/b Electric Motor, Skidded w/Life Frame

· * 6’H x 7’6”W x 40’L Mud Shaker Tank w/(3) Compartments, Internal Plumbing, Linear-Screen Shale Shaker, Top-Mounted Walkways, Stairs, Safety Rails, Skidded

RIG HOUSES

· * 7’8”W x 32’L Top Doghouse w/Round Top, Knowledge Box, Lockers, Bench Storage, Cabinets, Parts Bins, Fluorescent Lights, Heater, Skidded

· * 7’W x 20’L Change House w/Round Top, Parts Bins, Bench Storage, Fluorescent Lights, 11’L Porch w/QUINCY 370 Air Compressor, Skidded

· * 7’W x 20’L Mud House w/Round Top, Centrifugal Pump, Mud Hopper, Fluorescent Lights, Skidded

WATER /FUEL TANKS

· * 11’8”W x 7’H x 48’L Water/Fuel Tank w/MISSION 2” x 3” Centrifugal Pump, Skidded

· * 4’Dia x 12’L 4-Compartment Lubester, Skidded

HANDLING TOOLS

· * WOOLLEY Type B Rotary Tongs w/Heads

· * 4-1/2” BN Drill Pipe Elevators

· * 12-Segment Drill Collar Slips

· * INGERSOLL-RAND Air Hoist

AUXILIARY EQUIPMENT

· * MARTIN-DECKER Weight Indicator w/Torque Indicator

· * SATELLITE Auto Driller

· * 3-1/2”ID x Approximately 50’L Rotary Hose

· * (2) Vibrator Hoses

· * (2) Suction Hoses

· * 42”H x 4’W x 56’L 2-Section Steel Catwalk w/Steps

· * (6) 42”H x 28’L Triangular Pipe Racks

· * FIVE STAR Wireline Measuring Unit, w/.092” Line & Counter

· * Fluorescent Lights w/Wiring

PRICE: $700,000

U-15 SINGLE DRUM DRAWWORKS (Ref#9003Rd)

UNIT U-15 Single Drum Drawworks, S/N-N/A, LEBUS Grooved f/1-1/8” Line, Catheads, Overrunning Clutch, Driller’s Console, Crown Block Saver, PARKERSBURG 46” Double Hydromatic Brake, 2-Engine In-Line Compound, QUINCY Air Compressor, Above p/b (2) CAT 3406 Diesel Engines, w/Air Starter, Radiator, Gauges, NATIONAL C195-64 Torque Converters

MAST/SUBSTRUCTURE

* LEE C. MOORE 131’H Cantilever Mast, Pin-Type, Crown Block w/(5) Sheaves f/1-1/8” Line, 4” Standpipe, Crown Safety Platform, Racking Board, Tong Counterweights, Ladder, Derrick Climber, Boom, Mast Stand, Standpipe Manifold, 12’H x 22’W x 50’L Box-on-Box Substructure w/Rotary Beams, V-Door Ramp, Stairs, Safety Rails

GENERATORS

* (1) ARMSTRONG A200TV 200 KW AC Generators, Each p/b IVECO Diesel Engine, w/Electric Starter, Radiator, Gauges, Mounted in 8’W x 30’L House w/QUINCY 390 Air Compressor p/b Electric Motor, Electrical Control Panel (1) CAT Generator 3306

MUD PUMPS

· * EMSCO D-500 Duplex Mud Pump, 500 HP, 7-1/2” x 16”, Forged Steel Fluid End w/Threaded Caps, CONTINENTAL EMSCO-Type Pulsation Dampener, Suction Screen, OTECO 2” Shear Relief Valve, Type D Pressure Gauge, V-Belts w/Guard p/b CAT D353 Diesel Engine, w/Air Starter, Radiator, Gauges, Master Skidded

· * EMSCO D-500 Duplex Mud Pump, S/N-N/A, 500 HP, 7-1/2” x 16”, Forged Steel Fluid End w/Threaded Caps, CONTINENTAL EMSCO-Type Pulsation Dampener, Suction Screen, OTECO 2” Shear Relief Valve, Type D Pressure Gauge, V-Belts w/Guard p/b CAT D353 Diesel Engine, w/Air Starter, Radiator, Gauges, Master Skidded

ROTATING/TRAVELING EQUIPMENT

· * MUD KING 17-1/2” x 44” Rotary Table,, w/Split Master Bushing

· * MUD KING 200-Ton Swivel

· * 4-1/4” x 40’L Square Kelly w/Mousehole & Shuck

· * VARCO-Type Kelly Drive Bushing w/Square Drive

· * Upper Kelly Valve

· * MUD KING 200-Ton Block/Hook Combination w/(5) Sheaves f/1-1/8” Line

· * (2) 3-1/2” x Approximately 96” Elevator Links

WELL CONTROL EQUIPMENT

· * 6’H x 8’W x 28’L Mud Suction Tank w/4’L Skid Extension, (2) Compartments, V-Bottom, Internal Plumbing, MISSION Magnum 5” x 6” Centrifugal Pump p/b Electric Motor, Top-Mounted Walkways, Stairs, Safety Rails, Skidded

· * 6’H x 8’W x 28’L Mud Volume Tank w/4’L Skid Extension, (2) Compartments, V-Bottom, Internal Plumbing, DOUBLE LIFE 5” x 6” Centrifugal Pump p/b Electric Motor, Top-Mounted Walkways, Stairs, Safety Rails, Skidded

· * 6’H x 8’W x 28’L Mud Shaker Tank w/(3) Compartments, V-Bottom, Internal Plumbing, Top-Mounted Walkways, Stairs, Safety Rails, Skidded

· * MUDSMITH Linear Screen, Vibrating Shale Shaker p/b Electric Motor

· * 2-Cone Desander

RIG HOUSES

· * 10’W x 15’L Top Doghouse w/Flat Top, Knowledge Box, Lockers, Bench Storage, Cabinets, Parts Bins, Fluorescent Lights, Heater (Lowers Into Water Tank)

· * 7’W x 16’L Change House w/V-Top, Lockers, Bench Storage, Cabinets, Fluorescent Lights, 11’L Junk Box Extension, Skidded

WATER/FUEL TANKS

· * 12’W x 9’H x 19’L Water Tank w/12’L Parts House, Roof Supports f/Doghouse, MISSION Magnum 2” x 3” Centrifugal Pump, Skidded

· * 7’6”Dia x 9’L Diesel Tank w/5’L Skid Extension, 4’ x 3’ x 9’ 4-Compartment Lubester, Skidded

HANDLING TOOLS

· * WOOLLEY Type B Rotary Tongs w/Heads

· * BJ 4-1/2” Drill Pipe Elevators

· * WILSON 10” SD Casing Elevators

· * WOOLLEY Short 4-1/2” Drill Pipe Slips

· * 10-Segment Drill Collar Slip

· * 12-Segment Drill Collar Slip

· * Drill Collar Safety Clamp

· * Approximately (7) Drill Collar Lift Subs

· * Approximately (4) Assorted Changeover Subs

· * INGERSOLL-RAND Air Hoist

· * Mud Bucket

AUXILIARY EQUIPMENT

· * Clipper-Type Weight Indicator

· * SATELLITE Auto Driller

· * 3-1/2”ID x 55’L Rotary Hose

· * 3-1/2”ID x Approximately 40’L Vibrator Hose

· * (2) 5’L Suction Hoses

· * 42”H x 4’W x 52’L 2-Section Steel Catwalk w/Steps

· * (4) 36”H to 42”H x 7’W x 35’L Pipe Baskets

· * Hydraulic/Electric Wireline Measuring Unit w/.092” Line & Counter

· * Fluorescent Lights w/Wiring

· * Approximately 2500’ of 1-1/8” Drill Line w/Spool, Stand

 * Assorted Hand Tools, Rig Parts/Spares, Fire Extinguishers, Etc

PRICE: $975,000

U-15 DRAWWORKS (Ref#8102Ra)

DEPTH RANGE: TO 10,000'

DRAWWORKS: Unit U-15 Drawworks, Two D-353 Caterpillar Engines. (Drawworks has air clutches and all new bearings)

PUMPS: 1 GXP Gardner-Denver with Wilson Quick Change Fluid End- Pump #1, 1 GXP Gardner-Denver - Southwest Fluid End - Pump #2. Both with 353 Caterpillar Engines. Both have new vibrator hoses

MAST: 126' Lee C. Moore Mast, New centerpiece, Mast Tubescoped. Length & Width of Mast at Base: 18’ 6” x 18’ 6”

SUB BASE: 9' Substructure (18' x 45') - with two 4' x 45' pony subs (13')

ROTARY & DRIVE: 17 1/2" - Oil Well with 2" 26 Teeth Sprocket driven off Drawworks

CAT WALK: Two - 38"H x 5'W x 28'L

RIG EQUIP: BJ - B tongs

1 - Kelly Bushing 4 1/4 hex Kelly/w drive bushing Deflection Type Weight Indicator

TOTCO EQUIP: Survey Tool, complete, Clock, deg. Angle

AUT0. DRILLER: Automatic Driller Control (Satellite Type) Complete System

BOP'S: 13 5/8 Cameron Space Saver 3000 # x 13 5/8 with Payne MFC closing unit- 3 stage with 4 bottles, 80 gals each

DRILL PIPE: 242 Jts. 4-1/2" 16.60# Yellow Band, Mixed Grade (Approx. 7,500')

DRILL COLLARS: 25 Jts. 6" OD X 2-1/2" ID w H90 thrds.

HANDLING EQUIP: Lift subs; 6" - 9ea., 8" - 3ea.,

Bit Sub's 1ea. 6-5/8 reg x 6-5/8 & 1 ea, 4-1.2XH X 4-1/2 reg

X-over subs: 1ea. 6-5/8" X 4-1/2" XH, Circ. sub 1ea. 6-5/8" Circ. sub 1ea. 6-5/8" x 4-1/2" XH

Extra saver sub.

Pipe Racks: 5 set's, 2 1/2' tall.

1 ea. 4-1/2" elevators, 1ea. 8" Slips, 1ea. 6" Slips & 1ea. 4-1/2" D.P. Slips.

JUNK BASKET: One (1) Junk Basket on 6' X 6' skid

GENERATORS: One 250 KW Generator powered by D-343 Caterpillar completely overhauled. One 250 KW Generator powered by V-12 Detroit

WATER TANKS: 2 -500 bbl tanks with skid mount

MUD PITS: 2 Mud Pits-10' W X 8' H X 40' L with 10' Porches, 6 jets, 4 submergible guns. Each has 3 compartments

FUEL TANK: Diesel tank will be furnished by Fuel Company.

OIL STORAGE: Oil tank will be furnished by Fuel Company.

AIR HOIST: XJFH-3/35 Air Hoist, 6,744 pound capicity

TOOLPUSHER: No Trailer furnished.

AIR COMPRESSOR: 1 Atlas Cope with 200 Gal Air Tank in Light house and 1 Atlas Cope on Compound

TOP DOG HOUSE: 8' x 20' with 4 locks with 1 knowledge Box and Bench

BOTTOM DOG HOUSE: 8' x 28', 1/2 Parts House, 1/2 crew change house with 12 lockers

TRAVELING BLOCKS: EMSCO 8 line

SWIVEL: 170 Stepic (Emsco) Hook load 360,000 #, Static Load 280,000# (New) with New Kelly hose

KILL MANIFOLD: 10,000# Manifold

PRICE: $2,200,000

Rig has been rebuilt with used and reconditioned equipment.

U-15 (Ref#939N)

Derrick- 108’, 285,000 lb. w/New Certification: Serial #T2594

Drawworks- U-15 refurbished back to specs: ID#U15-2007-5, w/2-3406 Caterpillars

w/2-955 Allison Torque Converters

11’ Substructure

#1 Pump - 16” N1100 Duplex, Matco Fluid-end: Serial #X1177, powered by 3412 Caterpillar

#2 Pump - 18” C-350 National, Matco Fluid-end: ID#C350-002, powered by 379 Caterpillar

2 Pit Mud System

Mud Mixing Pump #1 “M.C.M.” Series 250

#1 Electric Motor 50HP

Mud Mixing Pump #2 “M.C.M.”

#2 Electric Motor 50HP

Desander Pump #3 Series 250 6x8

#3 Electric Motor 50HP

Desilter Pump #4 Series 250 5x6

#4 Electric Motor

Transfer Pump “M.C.M.” Series 250 5x6

Transfer Pump Electric Motor 50HP

Water Pump #1 Series 250 2x3

Electric Motor #1 BW 154412

Water Pump #2 Series 250 2x3

Electric Motor #2 BW 154411

Duck Pond Pump #1 “Mission” 1x1

Electric Motor #1

Duck Pond Pump #2 “Mission” 1x1

Electric Motor #2

Agitator #1 5HP

Agitator #2 5HP

Agitator #3 5HP

Complete Electrical System:

1 Generator House w/2 300 KW Generators & Emergency Electric Air Compressor

2 - Doghouses, Top & Bottom

Top Doghouse: ID# -104

Bottom Doghouse: ID# - 122

1- 150 Ton Swivel

1- 150 Ton Unit Shorty Block & Hook Combo - 4 sheave block w/Webb Wilson Hydro

Torque Hook: Serial #77

1 - 17 ½ ” Rotary Table

2 - Pen Geolograph Recorder

1- 10 ¾” 3,000# Reagan

1- 2-station closing unit

1- Water tank

1- 4¼” Square Kelly w/bushing

1- Catwalk

3 Pipe Tubs f/D.P.

3 - Sets triangle pipe racks

Rat hole & mouse hole

All floor tools, tongs, elevators, f /D.P. 150 Ton

Slips f/D.P. & collars

Linda Kay or Thompson Shale Shaker

Approximately 10,000 Gallon Diesel Tank

5000’ New Drilling Line

Approximately 7500’ of 4” F-H Drill Pipe S-135 Grade

15 Like New 6 ¼+ Drill Collars

Price: $2,200,000

Tel: 516-536-7375 Fax: 516-536-7317 rigs@sunmachinery.us