da

PUMP HOISTS / PULLING UNITS AVAILABLE FOR SALE

For additional information contact Maryann at (516) 536 7375 - rigs@sunmachinery.com

 

SMEAL 50T PUMP HOIST  (Ref#1030T) 

Drawworks Wichtex Model C65A double drum clutch and brake system, 3/4 cable 4 part mainline at 100,000#, 1/2" cable sandline, 3/8" cable tailout line, 70' mast, layback 15', catheads with gear reduction, air compressor, racking board included but not mounted, weight indicator, mounted on 2009 Peterbilt truck, 400 Cummins engine, 2 rear outriggers, 85,000# each, 15,000 miles, 2800 hours, well maintained  Price:  $239,500


SMEAL 6T  (Ref#14266T) 

Manufactured 2013, sandline, mounted on 2013 Dodge 4 x 4 truck with 6.7L I6 Cummins Turbo diesel engine, auto transmission, 230,000 miles, 11' fiberglass utility body, welder compartment, cathead, power to rear, 2 pipe racks, wire spool bracket, rope sheave, tool boxes, has DEF requirements  Price:  $92,500


SMEAL 5T  (Ref#5556T) 

Manufactured 1999, mainline, sandline, mounted on 1999 Ford F450 4 x 4 truck with 7.3L diesel engine, 5 speed manual transmission, 227,000 miles, 2 pipe racks with 23 ratchet straps  Price:  $37,500


SMEAL 5T  (Ref#4986T) 

Manufactured 1980, sandline, mounted on 2007 Ford 2 wheel drive truck with remanufactured 2007 6.0L diese engine (professionally installed July 2016), stainless steel rac ks, hand held remote, 297,000 miles, currently working  Price:  $34,500


SMEAL 5T  (ref#4620Ta

Manufactured 1978, mounted on 2000 Ford F550 4 x 2 truck with 7.3L diesel engine, 143,000 miles, 6 speed manual transmission, cathead, sandline, toolboxes  Price:  $45,000


SMEAL 5T  (Ref#7435T) 

Mounted on 1983 Ford F350 4 x 4 truck with 6.9L diesel engibne, sandline, oil cooler, new clutch and transmission, toolboxes, max capacity 12,000#, 143,000 miles, front leveling jack Price:  $29,500


SMEAL 5T  (Ref#4990T) 

Manufactured 1978, mounted on 2000 Ford F450 truck with 7.3L diesel engine, mainline, sandline  Price:  $15,000


SMEAL 3T PUMP HOIST  (Ref#7748T) 

Manufactured 2005, mounted on 2005 Chevy truck with diesel engine, 195,000 miles, 2 wheel drive, no cathead, no sandline, no remote, rear jacks  Price:  $28,500


SMEAL 3T  (Ref#12771T) 

Manufactured 1980, gas deck engine, no sandline, mounted on 1980 Chevy 3500 4 x 4, new mainline and gear box, windmill extension, has remote valves but not currently wired up  Price:  $22,500


PULSTAR P10HD  (Ref#2488T) 

Manufactured 2008, Kubota diesel deck engine, mounted on 2008 GMC TopKick C5500 4 x 4 truck with Duramax diesel, 193,731 miles, 2355 hours, Lincoln welder 145 with 412 hours, torch kit, 4.5 gallon electric air compressor, sandline, mainline, toolboxes.  Extensvie tooling including pipe wrenches, pipe rracks, outrigger exensions, slips, hyd jacks, 600 psi oilfield gauge, sump pump, crescent wrneches, rod elevators, rod grab, pulling rings, chain vise, pipe holder, pipe elevators, nipples, couplings, plugs, bushings, unions, tees, elbows  Price:  $96,500 PRICE REDUCED: $87,500


PULSTAR P10 PUMP HOIST  (Ref#7464T) 

Manufactured 2004, 3 lines, 40' power, remote control, mounted on Ford F550 truck with 6.0L Powerstroke, manual transmission, 67,500 miles, front jack  Price:  $75,000


SEMCO S20000 PUMP HOIST  (Ref#8387Ta) 

Manufactured 1981, 50' derrick, 4 part line, sandline, cathead, 3 outriggers, oil cooler and remote, mounted on Chevrolet Series 60 truck with Detroit diesel engine, 3 outriggers (1 front, 2 rear)  Price:  $44,500  PRICE REDUCED:  $29,500

Tooling available at extra cost


SEMCO 8000 PUMP HOIST  (Ref#6026T) 

Manufactured 2002, mounted on 2002 International 4400 truck with DT466 ernhinr, 106,000 miles, 10 speed transmission, 4 x 4 transfer case with high and low range, locking rear differential, trailer package, pintle hitch, hydraulic Lincoln welder/generator, new tires, 2019 DOT  Price:  $55,000


SEMCO 8000 PUMP HOIST  (Ref#8213T

Mounted on 2006 Ford F450 4 wheel drive truck with 7.3L engine, new 6 speed manual transmission, 40' mast, remonte control, cathead,. 2 rear jacks, hydraulic breakout cylinder, tong hanger, bailing drum, toolboxes  Price:  $43,000 PRICE REDUCED: $39,000


SEMCO S8000  (ref#3191T

Manufactured 1989, sandline, mounted on 1989 Ford L7000 truck with Ford 6 cylinder diesel engine, air brakes, automatic transmission, 90% rear tires, 50% front tires, currently working  Price:  $40,000


SEMCO S8000 (Ref#3926T

16,000# capacity, 130" per minute line speed at 8000# single line, 30 gal oil reservoir, hydro pump, 180" of 1/2" main line cable, 7 ton swivel hook, automatic brarke, hydro controls, vari speed engine control, 36' derrick, remote control, 2 speed winch, sandreel (1500' capacity), sandline cab le (1200'), hydraulic oil cooler, front outrigger, (2) 48" toolboxes, aux hydro valve, mainline weight, bolt on swedge for sandline, (2) 1" pipe elevators, (12) 2" pipe elevators, mounted on 2005 GMC C4500 Dura Max 4 x 4 truck with diesel, automatic transmission, 17,500 GVW 

Price:  $39,500 PRICE REDUCED: $37,500


See more photos and updated information on our website at: PUMP HOISTS FOR SALE


PULSTAR P60 PUMP HOIST  (Ref#13270T) Manufactured 2008, mounted on 2010 International 7400 SBA 6 x 4 truck, Maxx Force GDT 300 engine (300 hp), Fuller 8 speed transmission Deep Reduction Transmission, 20' flatbed, 54' mast, main line, sand line, layout line, cathead, oil cooler, aux hydraulics and 3-park block  Price:  $240,000

PULSTAR P12  (Ref#8620T)  Manufactured 2016, sandline, 38' telescoping mast, mounted on 2016 Dodge RAM 5500 4 x 4 truck, approx 11,700 miles, auto transmission, 6.8L Cummins Turbo diesel engine  Price:  $128,000

PULSTAR P12 PUMP HOIST  (Ref#6119T)  Manufactured 2014, no sandline, mounted on 2014 Dodge Ram 5500 4 x 4 with 5.6L diesel engine, 132,000 miles, auto transmission, 50' mast for windmill extension, extended bed, meets California emmissions  Price:  $95,000

PULSTAR P12 PUMP HOIST  (Ref#6127T)  Manufactured 2012, sandline, mounted on 2012 Dodge 5500 4x4 truck ith dieel engine, 86,000 miles, 6000# pull on single line, 12,000# on double line, wired remote, hydraulic cooler, LED mast light kit, 44' mast with lift assist, ipe rack, rear jacks, Lincoln electric 305G Ranger welder   Price:  $102,500

PULSTAR P12000  (ref#7847T)  Manufactured 2009, mounted on 2009 Dodge 5500 4 x 4 truck, Cummins 6.7L turbo diesel engine, 6s speed manual transmission with overdrive, ABS – 4 wheel, 300' sandline with remote control, main (2 speed), tailout,  cathead with rope sheave, 7' additional mast height (44'), PTO, long front jack / long rear jack, extra heavy duty tailgate / tow bumper, wire spool (2 mounts), hydraulic oil cooler, light kit, Bobcat 225G generator/welder, 1 hp 12 gal Sears air compressor, 40 gal water tank, water outles to 3 positions, ready to work   Price:  $83,500

PULSTAR P12  (Ref#8548Ta)  Manufactured 2004, mounted on 2004 Ford 4 x 4 truck with 6.0L diesel engine, 150,000 miles, sandline with 800' of cable, power to rear, front outrgiger, long jacks, backup camera, 37' mast, toolboxes, pipe rack  Price:  $64,500

PULSTAR P12 PUMP HOIST  (Ref#6093T)  Manufactured 2002, sandline, freefall capacity, mounted on Ford F550 4 x 4 truck with 7.3L diesel engine, 55,000 miles  Price:  $37,500

PULSTAR P12  (Ref#2004T)  Manufactured 2002, sandreel with freefall, 1/2" x 150' mainline cable, 5/16" x 1000' sandreel cable, 3/8" x 125' tailout cable, additional mast height 18" – 40' tower, mounted on 2002 Ford F550 4 x 4 truck with diesel engine, 6 speed transmission, 165,000 miles, front outrigger, 2 pipe racks, hydraulic power to rear, oil cooler, 3 jacks, walking beam, wireless remote, breakout wrench, mast light kit  Price:  $84, 500

PULSTAR P10HD3L  (Ref#10192T)  Manufactured 2012, mounted on 2012 Dodge 5500 4 x 4 truck with diesel engine, 112,000 miles, 6 speed manual transmission, front jack, bed liner, toolboxes  Price:  $89,500

PULSTAR P10000  (Ref#7761T)  Manufactured 2008, mounted on 2008 Dodge truck with 145,000 miles, tip top bed, front jack, Cummins engine, no cathead, no sandline, 37' standard mast  Price:  $82,500 PRICE REDUCED: $77,500

PULSTAR P10 HD  (Ref#10807T)  Manufactured 2007, no sandline, no cathead, extended mast, mounted on 2007 Ford F550 XLT 4 x 4 truck, 6.0L diesel engine (installed at 94,500 miles), approx 146,000 miles, remote control, throttle control module, 2 HP pipe racks, hydraulic power to the rear, wire spool mounted, HD tailgate and 11" HD tow bumper, 9' open top utility bed, utility box,light kit for mast,  1 front and 2 rear leveling jacks  Price:  $80,000  PRICE REDUCED:  $72,500

PULSTAR P10 PUMP HOIST  (Ref#10820T)  Manufactured 2006, mounted on Ford F550 4 x 4 truck, approx 220,000 miles, no cathead, no sandline, remote control, good working condition  Price:  $44,500

PULSTAR P10000-HD3L  PUMP HOIST  (Ref#7820T)  Manufactured 2006, sandline, hydraulic outriggers and holding valves, remote controk, 40' tower height, pipe racks (2) with rack straps, front jack (xl), mast lights, HD tailgate, throttle commander, Omaha standard lift top service body, (aluminum fronts, tops, rears), deluxw through compartment, stainless steel paddle latches, wire mounts (front and rear), HD tow bumper and hitch, mounted on 2005 Ford F550 4 x 4 truck with 6.0L diesel engine, 88,000 miles, A/C, 6 speed, locking differential, HD rear suspension, approx 81,000 miles, 165" wheelbase,   Price:  $57,500

PULSTAR P10HD3L PULLING UNIT  (Ref#6347T)  Manufactured 2006, sandline, mounted on 2006 Ford F550 Super Cab 4 x 4 truck, approx 142,500 miles, 6.0L diesel engine, new Michelin tires, new trailer brake controller, 6 speed manual transmission, mast and rear lights, new rear leaf springs, Omaha utility body with compartments, engine block heater, stored inside, one owner unit  Price:  74,500

PULSTAR P10000 PUMP HOIST  (Ref#859T)  Manufactured 2006, sandline, no cathead, 32' mast, mounted on 2006 Ford F550 4 x 4 truck, 82,000 miles, 6.0L diesel engine, manual transmission  Price:  $53,500

PULSTAR P10000  (Ref#8551T)  Manufactured 2006, 31' mast, no cathead, no sandline, mounted on 2001 International 4700 truck, DT466E engine, 465,000 miles  Price:  $40,000

PULSTAR P10000HD3L  (Ref#8273Tc)  Manufactured 2005, 37' telescopic mast, sandline, mainline, toolboxes, no breakout wrench, load rating: 5,000# single line, 10,000# double line, 15,000# triple line, mounted on 2005 Ford F550 XLT 1-ton all wheel drive truck (141" wheel base) with 6.0L Power Stroke diesel engine, 6 speed manual, 1 ton truck, rear leveling jacks, remote control  Price $74,500 PRICE REDUCED: $62,500

PULSTAR P10 PUMP HOIST  (Ref#11743T)  Manufactured 2002, no sandline, mounted on 2002 Ford F350 4 x 4 truck with 7.3L Powerstroke engine, remote, 6 speed transmission  Price:  $35,000

PULSTAR P10000HD  (Ref#7836T)  Mounted on 2001 Dodge Ram 4 x 4 truck with Cummins 5.9 diesel engine, 125,000 miles, sandline, new 5 speed manual transmission, new back up camera, wired remote, new cable, swedge and hooks, pipe vice, wire roller  Price:  $64,500 PRICE REDUCED: $59,500

PULSTAR P10000HD  (Ref#7313T)  Manufactured 2001, 3 lines, no sandline, 237,000 miles, mounted on 2001 Ford F550 with 7.3L Powerstroke (new 2009 @ 150,000 miles), 11' bed, additional 4' boom extension, hydraulics to rear, completely restored and painted, qaluminum diamond platin, new ejectors  Price:  $90,000
Also has 2005 and 2006 Pulstar P10000 on Ford 550 with 6.0L

PULSTAR P7000  (Ref#7302T) Manufactured 2007, mounted on 2007 Ford F550 4 x 4 truck with Powerstroke diesel engine, 800 hours, 6300 miles, 6 sp manual transmission, cathead, former municipal truck  Price:  $63,500 PRICE REDUCED: $59,500

PULSTAR P7  (Ref#8548Tb)  Manufactured 2004, mounted on 2004 Ford truck with 6.0L diesel engine, no sandline, wire winder, pipe rack, 140,000 miles, backup camera, front outrigger, toolboxes, tires like new  Price:  $54,500

PULSTAR P7000  (Ref#2942T)  Manufactured 2002, mounted on 2002 Ford F450 4 x 4 truck, 6.0L engine, sandline, remote, bottom of bed rusted, front jack, no cathead, 42' mast  Price $47,500

PULSTAR P7 PUMP HOIST  (Ref#9354T)  Mounted on 1999 Ford F450 truck, 7.3 Power Stroke diesel engine, standard transmission, new clutch 2019, Pac brake exhaust brake, new front drive tires 2019, rear tires 2018, approx 115,000 miles  Price:  $80,000

PULSTAR P4000  (Ref#5340T)  Manufactured 2008, no sandline, mounted on 2011 Dodge Ram 4500 4x4 truck with diesel engine, 117,870 miles, Omaha utiity bed, remote control  Price:  $79,500

70 TON PUMP HOIST  (Ref#11032T)  Single drum, 48' x 140,000# hydraulically raised mast, 6 line, mounted on 1981 Transtar 4300 tandem axle truck with 871 Detroit diesel engine, 4 hydraulic leveling jacks, 6V53 Detroit diesel deck engine, good hook/block, one set of new power tongs (2"-12"), 3 hydrarulic winches, toolboxes, no sandline.  This is a heavy duty, reliable rig and was used to work over deep-set water well pumps.  This rig is currently working in Texas  Price:  $102,000 PRICE REDUCED: $69,000

50 TON SPEEDSTAR WS-50 PUMP HOIST  (Ref#15367T)   Manufactured 1981, mounted on 1999 Sterling AT9513 truck  Price:  $110,000

25 TON CARTER PUMP RIG  (Ref#10350Tc)  Manufactured 19765, Chrysler 216 gas on deck, mounted on 1998 Freightliner FL70 truck with 8.3L Cummins engine, 54,500 miles, 150' sandline, cathead, main winch has 8 line block, air clutches on mainline and sandline, no remote, 2 hydraulic jacks  Price:  $49,500 PRICE REDUCED: $44,500

SEMCO S25000  (Ref#7295T)  Manufactured 2002, 30 ton, 3 line block, mounted on 2002 Ford F750 truck with Cat diesel engine, 68,000 miles, lifts up to 60,000# with 48' derrick with third leg attachment, can take 5 park block and pull 100,000#, cathead, PTO direct mounted pump air shift, hydro breakout cylinder and valve, 2 speed winch, hydraulic oil cooler, 18' steel flatbed, (2) 96" toolboxes, power tong hook up  Price:  $164,500

SEMCO S25000 PUMP HOIST  (Ref#3427T) Manufactured 1998, 1800' sandline, tailout winch, mainline, oil cooler, toolbxoes, 48' telescoping derrick with laydown line, P22' bed, jack shaft, remote, mounted on 1989 Ford 9500 Series truck with 6 cylinder Cummins diesel engine, 6 speed transmission w/2 speed rear, GVWR 33,000#, 44,500 miles, PTO, 1 front hydraulic jack, 1 part block (3 sheave), will include double line block     Price:  $115,000 PRICE REDUCED: $102,500

SEMCO S25000 PUMP HOIST  (Ref#7488Tb)  2 speed winch with grooved drum, 2000' capacity sand reel (cable not included), 50' derrick, 84" wide derrick conversion, direct mounted pump, aux hydro valve, heavy duty cathead, behind cab outriggers, power arm, LED light kit, power tong hhok up to the rear with air, toolboxesmounted on 2010 International 4400 truck  Price:  $195,000

SEMCO S20000  (Ref#15715T)  Manufactured approx. 2000, mounted on 1982 Mack tandem axle truck, diesel engine, sandline, no cathead, no windmill, no remote, good tires, ready to work  Price:  $52,000

SEMCO S12000  (Ref#11718Tb)  Manufactured 1999, no sandline, mounted on 1999 Ford F650 truck with Cummins 5.9L diesel engine, 127,000 miles, manual transmission, no power tongs, 2 rear jacks, 200' of 9/16" line    PRICE REDUCED:  $39,500
Slips and elevators available at extra cost

SEMCO S12000 (Ref#13098RB) Sandline, no remote control, hoist is newer than truck, mounted on 1979 International with DT466 engine  Price:  $29,500

SEMCO S8000  (Ref#5355T)  Manufactured 2014, sandline with no line, mounted on 2017 Ford F550 4 x 4 extended cab with 6.7L diesel engine, 12,000 miles, wire wheel, remote, hyd lines, recently serviced  Price:  $109,500

SEMCO S8000  (Ref#15200T)  Manufactured 1995, sandline, remote, mounted on 1983 International truck with diesel engine, new PTO gear box, new 180' of 1/2" wire rope, rebuilt rear leveling jacks, rebuilt hyd control valve, new hyd pump, new mainline, gearbox, new brake and lines, new tires, toolboxes, front jack, tooling:  trapdoor slips for 4" and 5", plate slips for 6" and 8", plugs and elevators, various hand tools  Price:  $41,500

SEMCO S8000  (Ref#5750T)  Manufactured 1994, 46' mast, free fall, sandline with 1000' of cable, mounted on 1993 International 8100 4 x 2 truck with 310E Cummins engine, 2 wheel drive, air brakes, air ride suspension, runs and drives good, truck has lots of storage, ready to go.  Length 23'8", mast overhand 5'6"  Price:  $40,000 PRICE REDUCED: $38,500

SEMCO S8000  (Ref#10005T)  Manufactured 1982, Rebuilt 2018, mounted on 2003 Ford F450 truck with Powerstroke 6.0L diesel engine, 2 wheel drive, 37' A-frame telescoping mast, sandline with 3 speed transmission, 170' of new cable, wired remote, toolboxes, 6 speed manual transmission, new front tires, less than 85,000 miles, no oil leaks  Price:  $37,500

SEMCO S6000  (Ref#10843T)  Manufactured 2016, 44' extended mast (can pull doubles), 3/8" x 1500' sandline (never used, still on reel), 3000 power inverter, auxiliary hydro valves, 30 gallon oil reservoir, hydraulic oil cooler, mounted on 2003 Ford F550 truck with 6.0L diesel engine, 6 speed manual, 4 wheel drive,, PTO direct mount, 48,000 miles, 25,000 miles on new engine, 2 rear leveling jacks  Price:  $84,500 PRICE REDUCED: $79,500

SEMCO S6000  (Ref#7972T)  Manufactured 2008, mounted on Dodge with 6.7L diesel engine, 98,000 miles, sandline with 2 speed winch, 44' mast, 2 pipe racks  Price:  $79,500

SEMCO S6000 PUMP HOIST  (Ref#8522T)  Manufactured 2004, sandline, 37' mast, remote control, 2 speed main line, mounted on 2016 Dodge Ram 5500 4 x 4 truck with 6.7L Cummins diesel engine, 6 speed manual transmission, crew cab, 650000 miles  Price:  $69,500

SEMCO S6000  (Ref#8001T)  Manufactured 2006, sandline, 2 winches, mounted on Ford F550, 70,000 miles, toolboxes, good condition  Price:  $73,500  PRICE REDUCED:  $62,500

SEMCO S6000  (Ref#11416T)  Manufactured 1999, no sandline, no remote, mounted on 1999 Ford F350 4 x 4 truck with V10 gas engine, approx 50,000 miles  Price:  $44,500 PRICE REDUCED: $37,500

SEMCO S6000  (Ref#3997T)  Built late 1980's, mounted on 1988 Ford F700 2-wheel drive truck, gas engine, low miles, hydraulic wire winder, remote control, pipe rack, toolbox and tools  Price:  $21,500

SEMCO S4000  (Ref#11326T)  Manufactured 2011, sandline, 35' mast, mounted on 2011 Dodge Ram 5500 4 x 4 truck with 6.7 Cummins diesel engine, power door and windows, 70,500 miles  Price:  $77,500 PRICE REDUCED: $69,500

SEMCO S4000  (Ref#13331T)  Manufactured 2005, 8000# cap, no cathead, no sandreel, utility bed, 33' mast, remote control, toolboxes, mounted on 2016 Dodge Ram 3500 4 x 2 truck with Cummins diesel engine, 2 rear hydraulic jacks  Price:  $57,500

SMEAL R15  (Ref#11052Ta)  50' hydraulically raised and cable scoped telescopic derrick, 60,000# drawworks, 15,000# SLP, 4 lines, all hydraulic, hydraulic cathead, aux hydraulic power to rear of rig, mounted on 1998 3 axle Freightliner truck, Cummins 400 hp engine, PTO drive, multi stage pump, Road Ranger transmission, rig and chassis in excellent condition.    Price:  $165,000

SMEAL R12 / GENERAL  (Ref#11052Tc)  Smeal R12 drawworks, 8 lines, 12,000#, all hydraulic with hydraulic cathead and aux hydraulics to rear.  100,000# General hydraulically raised tower, 9 lines available, hydraulic third leg and outriggers at rear (built for pulling 20' column pipe), mounted on 2010 Peterbilt truck with 400 hp Cummins engine, Road Ranger transmission, dual drive  Price:  $270,000

SMEAL R12 / GENERAL  (Ref#11052Td)  Smeal R12 hydraulic drawworks, 8 lines, 12,000#.  100,000# General derrick, 9 lines available, hydraulic third leg and hydraulic rear outriggers (built for pulling 20' column pipe), hydraulic cathead for breakout, mounted on 1997 Freightliner with 400 hp Cummins engine, Road Ranger transmission, dual drive.  Rig and chassis in excellent condition  Price:  $190,000

SMEAL 12T  (Ref#10098T)  Manufactured 2002, sandline with 2100', mounted on 1988 International tandem axle truck with DT466 Detroit, 33,000# pullback, Spicer automatic transmission, 2 leveling jacks  Price:  $94,500  PRICE REDUCED:  $82,500

SMEAL 12T  (Ref#11771T)  Manufactured 1998, mounted on 1995 Freightliner FL70 truck with Cummins diesel engine, 27' mast, sandreel, cathead, oil cooler, bull gear on drawworks is new, new PTO, new transmission, no remote Price:  $84,500  PRICE REDUCED:  $62,500

SMEAL 12T  (Ref#6386T)  Manufactured 1994, sandline, laydown line, hydraulic breakout,  mounted on  1994 Ford truck with gas engine, 67,000 miles, fresh paint  Price:  $64,500


PUMP HOIST PACKAGE AVAILABLE
SMEAL 12T  (Ref#3403Ta) Manufactured 1988, mounted on 1981 Ford 700 with Cat 3208 diesel engine, cathead, sandline, oil cooler.  Rig and truck both run, some hydraulic seals on rig leak 
SMEAL 5T  (Ref#3403Tb)  Manufactured 1982, cathead, sandline, mounted on 1979 International Harvestor truck (truck is no good), rig has not run for 10 years 
SMEAL R2  (Ref#3403Tc)  Manufactured 1985, mounted on 1999 Ford 350 truck with V10 engine, trucks needs new gas tank and fuel pump 
LAVAL UNDERGROUND TV SURVEY UNIT  (Ref#3403Td)  mounted in Van, down hole view 
PACKAGE PRICE: $39,500

SMEAL 10T  (Ref#6270T)  Manufactured 1983, no sandlnie, mounted on 1982 Chevy truck with 454 gas engine, tailout winch, cathead, 2 rear jacks, no remove, 23,160 GVW  Price:  $44,500

SMEAL 10T  (Ref#6369Ta)  Manufactured 1983, 3 line machine, sandline, breakout cylinder, cathead, 36' mast, mounted on 1996 Freightliner F170 with 5.9 Cummins engine, 2 rear leveling jacks, remote control  Price:  $74,500

SMEAL 10T  (Ref#11694T)  No sandline, no cathead, has plug in for remote control, but does not have remote, standard mast, mounted on 1997 Peterbilt with Cat C7 engine, new hydraulic hoses, 2 rear leveling jacks, painted  Price:  $52,500 PRICE REDUCED: $46,500

SMEAL 10T  (Ref#3173T)  Sandline, mounted on 1991 International 5300 truck with DT366 diesel, 70,000 miles, windmill extension, cathead, hydraulic oil cooler, breakout wrench, tailout winch, remote control, 2 rear jacks  Price:  $67,500

SMEAL 10TWB  (Ref#4598T)  36' mast, no sandline, no cathead, mounted on 1982 GMC Topkick truck, diesel engine, rear leveling jacks, recently painted, working condition  Price:  $39,500

SMEAL 10T  (Ref#13376T)  Manufactured 1978, extended mast, mounted on 1997 Freightliner FL70 truck with Cummins 6BT engine, 5 speed, PTO, sandline, cathead, toolboxes, remote control, 2 rear hyd leveling jacks, completely gone through in 2000 (new pins, hoses, cables, and cylinders), only used 1-3 times per year in the past 7 years  Price:  $47,500

SMEAL 10T  (Ref#3302T)  Manufactured 1975, sandline, mounted on 2001 International truck with DT466 engine, manual 6 speed transmission, hyd brakes, 32,312 miles, all new hydraulics January 2017, new style one body control from Hunke, no remote, updated hydraulic motors, set up for power tongs, 2 hyd tanks  Price:  $58,500 PRICE REDUCED: $43,500

SMEAL 8T PULLING UNIT  (Ref#7825T)  Manufactured 2001, sandline, 46' mast, no cathead, mounted on 2001 International 4700 truck with DT466E engine, 2 rear leveling jacks  Price:  $69,500

SMEAL 8T  (Ref#4450T)  Manufactured 1992, mounted on 1991 Ford F700 truck  Price:  $37,500

SMEAL 8T  (Ref#12405T) Built 1979, sandline, mounted on Ford Louisville truck with diesel engine, no remote, no cathead, toolboxes, 1 front and 2 rear hyd jacks  Price:  $32,500

SMEAL 6T (Ref#12354R) Manufactured 2009, mounted on 2009 Dodge Ram 4500 4 x 4 crew chassis with Cummins diesel engine, (approx 65,000 miles Sept 2015), sandline, remote control, 11' service body, 36' derrick, hydraulic power to rear   Price:  $87,500

SMEAL 6T  (Ref#10742T) No sandline, standard mast, mounted on 2010 Ford F550 4 x 4 truck with crew cab  Price:  $75,000

SMEAL 6T  (Ref#8342R) Manufactured 2006, mounted on 2006 Ford F550 truck, 4 wheel drive, 6.0 diesel engine (new July 2014), 6 speed manual transmission, 145,000 miles (as of Sept 2015), no sandline, no cathead, 2 rear leveling jacks  Price:  $87,500 PRICE REDUCED: $79,500

SMEAL 6T  (Ref#5212T)  Manufactured 2006, mounted on 2006 Ford F350 Super Duty 4 x 4 truck with 7.0L diesel engine, sandline, cathead, remote control, 40' mast, toolboxes, 2 hyd jacks  Price:  $70,000 PRICE REDUCED: $61,500

SMEAL 6T  (Ref#13281T)  Manufactured 2004, 30' mast, no sandline, mounted on 2004 Ford F450 truck, diesel PTO engine, manual transmission, approx 130,000 miles  Price:  $45,000

SMEAL 6T PUMP HOIST  (Ref#1543T)  Built 2002, mounted on 2002 Ford 4 x 4 truck, 5 speed, 41,000 miles, 7.3L diesel engine, cord remote, new idle control, new cable, set up as single line, can use sandline, 34' mast, new tires, one owner  Price:  $82,500

SMEAL 6T  (Ref#14222Tb)  Mounted on 1995 Ford F350 4 x 4 truck, 7.3L diesel engine, 36' derrick, no sandline  Price:  $62,500

HUNKE 5T  (Ref#11545T)  Manufactured 2014, mounted on 2000 Ford F450 truck, 7.3L diesel engine, no sandline, no cathead, 38' mast, k2 pipe racks  Price:  $38,500

SMEAL 5T  (Ref#9197T) Manufactured 2014, no cathed, no sandline, mounted on 2014 Ford F450 4 x 4 truck, V10 engine, standard mast, outrigger, approx 126,000 miles  Price:  $74,000

SMEAL 5T  (Ref#8602T) Windmill extension, sandline, no cathead, mounted on 2012 Dodge 4 WD truck with Cummins diesel engine, 11' utility bed  Price:  $54,500

SMEAL 5T  (Ref#4077Tb)  Manufactured 2009, sandline, mounted on 2009 Ford F550 2 x 4 truck, XL 141" WB chassis cab, 6.4L V8 diesel engine, Torqushift 5 speed auto tran, 180,000 miles, remote control, 2 rear leveling jacks  Price:  $57,500

SMEAL 5T  (Ref#4077Ta)  Manufactured 2007, sandline, mounted on 2007 Ford F550 2 x 4 Reg Chas Cab, XL 141" Wheel base, 6.0L V8 diesel engine, 6 speed manual DSL O/D-HD TRA, 130,000 miles, remote control, 2 rear leveling jacks    Price:  $50,000

SMEAL 5T  (Ref#8124T)  Manufactured 2003, fully loaded, mounted on 2003 Ford F450 4 wheel drive truck, 6 speed manual transmission, diesel engine, PTO, standard mast (no extension), remote control, sandline, dual pipe racks, new winch line and new hydraulics hoses 2017, custom aluminum bed with toolboxes, 3 hyd leveling jacks  Price:  $45,500

SMEAL 5T  (Ref#7983T)  Mounted on 2004 F450 truck, diesel engine, 2 wheel drive, shtandard shift, 150,000 miles  Price:  $40,000

SMEAL 5T  (Ref#11563T)  Manufactured 1989, mounted on 2007 Ford F350 4 wheel drive truck with V10 gas engine, automatic transmission, remote control, 2 rear levelng jacks, toolboxes, no sandline, no cathead Price:  $42,000

SMEAL 5T  (Ref#6262T)  Manufactured 2004, sandline, mounted on 2004 Ford F450 4 x 4 truck with rebuilt 6.0L diesel engine, 9' bed, no remote, 38' mast, 3 jacks, windmill extension, toolboxes  Price:  $37,500

SMEAL 5T  (Ref#12658T)  Sandline, cathead, mounted on 2003 Ford F550 truck, V8 Turbo diesel engine, manual gear 2 x 4, used weekly  Price:  $37,500

SMEAL 5T  (Ref#10114T)  Sandline, 39' mast, no cathead, mounted on 1988 Ford F350 truck with 7.3L diesel engine  Price:  $42,500

SMEAL 5T  (Ref#12580T)  Manufactured 1998, mounted on 1998 Ford F700 truck with 7.0L Ford gas engine, 77,000 miles, sandline, 30' mast, cathead, locking beam  Price:  $29,500 PRICE REDUCED: $24,500

SMEAL 5T  (Ref#5692Ta)  Mounted on 1999 Ford F350 truck, 7.3 diesel engine, transmission needs to be replaced, sandline, no cathead, windmill extension  Price:  $24,500

SMEAL 5T  (Ref#10423Tb)  Mounted on 1995 Ford F350 (not 4 x 4) truck with 7.3L diesel engine, no sandline  Price:  $27,500

SMEAL 5T  (Ref#7536T)  Manufactured 1993, sandline, mounted on 1993 Ford F350 4 x 4 truck with 7.3L diesel engine, aluminum body, toolboxes, 26,000 original miles, rear jacks, stored inside  Price:  $35,000

SMEAL 5T  (Ref#3018T)  Mounted on 1992 Ford F350 truck with 7.3L diesel engine, PTO, extendable mast, dual back wheels, no sandlnie, no cathead  Price:  $20,000

SMEAL 5T  (Ref#118Ta)  Manufactured 1991, sandline, windmill extension, long jacks, remote, mounted on 2005 International 4300 with DT466 engine, 99.770 miles, utility bed with extra 3' cross over box  Price:  $48,000

SMEAL 5T  (Ref#118Tb)  Manufactured 1991, sandline, windmill extension, remote, mounted on 1999 Freightliner FL60 truck with 5.9 Cummins  Price:  $40,000

SMEAL 5T  (Ref#1862T)  Manufactured 1990, no sandline, mounted on 6-speed 2011 Freightliner M2 with diesel engine, 66,000 miles, locking rear, linesman utility bed, a/c, am/fm radio, exhaust break, pipe rack, toolboxes  Price:  $58,500

SMEAL 5T  (Ref#2482T)  Manufactured 1989, cathead, platform mounted walking beam, 8' x 12' platform, 300 gal SS water tank, pipe racks, munted on 1996 International 4300 truck with 466 DT, 7 speed tranasmission, new tires, rebuilt end, toolboxes, brand new atarter and readiator, remote control, 2 rear hyd jacks  Price:  $33,500

SMEAL 5T  (Ref#9374T)  Manufactured 1995, mounted on 1995 Ford F450 2-wheel drive truck with diesel engine, service body with toolboxes, 2 rear leveling jacks, remote control, no sandline  Price:  $29,500

SMEAL 5T  (Ref#4318R)  Manufactured 1986, unmounted, sandline, load sensing pump, new valves, remote, new hoses, new cable, windmill extension, 50' mast, automatic transmission, 96,000 miles, toolboxes, sandblasted and painted     
PRICE UNMOUNTED:  $23,500
Will mounted on 2008 FORD F550 4 X 4 TRUCK with V10, automatic transmission, 76,000 miles  Price:  $56,000

SMEAL 5T  (Ref#1067Na)  Mounted on 1992 Ford F350 4-wheel drive, dual wheels, 8' flatbed, 460 gas engine, no cathead, 10,000# main winch, remote control, aluminum and steel toolboxes, 2 pipe racks, brand new tires, new fenders, 35' mast, 100,000 miles  Price:  $37,500

SMEAL 5T  (Ref#6107Tb)  Manufactured 1981, mounted on 2013 Ford 550 with 6.7 diesel engine, Honda 24 hp deck engine, sandline, aux hydraulics to back of unit, no breakout tongs, no cathead, remote  Price:  $49,500

SMEAL 5T  (Ref#6802T)  Manufactured 1970's, mounted on 1996 Ford F700 2-wheel drive truck with Cummins diesel engine, 46' mast, remote control, no cathead, sandline, 2 rear hyd leveling jacks, utility bed with toolboxes, welder, good condition  Price:  $42,500

SMEAL 5T  (Ref#9807Ta)  uilt late 1970's, mounted on 1992 Ford single axle truck (2 wheel drive) with gas engine, PTO, no sandline, toolboxes, currently working  Price:  $19,500

CYCLONE 5T PUMP HOIST  (Ref#8387Tb) Mounted on 1980 Dodge 1 ton 2WD truck, remote  Price:  $25,000 PRICE REDUCED: $17,500

SMEAL 4T  (Ref#15707T)  Manufactured 2003, mounted on 2003 Ford F350 4 x 4 truck, 228,000 miles, 6.0L diesel engine, 6 speed transmission, back up camera, in-line cable weight, double line block, no sandline, 37' mast  Price:  $42,000

SMEAL 4T  (Ref#5175T) Mounted on 2003 Chevy 3/4 ton 4x4 with service body, 5.3L engine, sandline, 36' mast with windmill extension, no cathead  Price:  $31,000

SMEAL 3T  (Ref#13854T)  Manufactured 1994, mounted on 2007 Ford F350 4 x 4 truck, 6L Powerstroke engine, 6 speed transmission, 36' mast with windmill extension, rear jacks, no sandline, no cathead  Price:  $37,000

SMEAL 3T  (Ref#11105T)  Manufactured 1989, extended mast, mounted on 1989 Chevrolet 1-ton dually truck, gas engine, sandline, corded remote, no cathead, 2 rear hydraulic jacks, stored inside  Price:  $17,500

SMEAL 3T  (Ref#2351T)  Mounted on 1974 1-ton truck tandem axle (will remove from truck), sandline (nop line), no cathead, remote (not wireless)  Price:  $9,500

SMEAL 3T  (Ref#10023T)  350 gas engine, 32' mast, no sandline, no cathead, mounted on 1993 Chevy 1 ton single axle truck, running condition  Price:  $15,000

SMEAL 3T  (Ref#6764T)  Manufactured 1970's, mounted on 2006 Chevy 1 ton truck with gas engine, remote control (needs repair), 26' mast, mainline and sandlne, toolboxes, 2 rear hydraulic leveling jacks  Price:  $21,500

SMEAL 3T (Ref#4247RA) Manufactured 1980's, PTO, mounted on 1997 Dodge 2500 4x4 with Cummins Turbo diesel engine, auto transmission, 315,000 miles, 36' mast, remote control, no cathead or sandline, toolboxes, 2 rear hydraulic leveling jacks, excellent condition  Price:  $27,500  Will sell hoist removed from truck

SMEAL 3T  (Ref#8353Ta)  Mounted on 2004 Ford F450 truck, crate motor with 30,000 miles, utility box, no cathead, no sandline, 36' mast  Price:  $23,000

SMEAL 3T  (Ref#3884Tb)  Sandline, no cathead, mounted on 1988 Ford 350 with 7.3L diesel (truck does not run)  Price:  $11,500

SMEAL 32BT  (Ref#7894Ta)  Manufactured 1994, no sandline, no cathead, 32' mast, mounted on 1994 Ford F350 4 x 4 truck, utiity boxes, 47,000 truck miles, located Canada, components were assembled in Canada   Price:  $24,500  PRICE REDUCED:  $18,500 USD

SMEAL 32B  (Ref#14118R)  28' derrick, no sandline, mounted on 1987 Chevrolet truck with 350 gas engine, PTO, approx 131000 miles  Price:  $19,500 PRICE REDUCED:  $12,500

SMEAL 32B  (Ref#8349R)  Mounted on 1994 Chevy 3500 steel bed truck, 87,000 miles, high idle, main line, sandline, new cables, hydraulic outriggers  Price:  $30,000

SMEAL 32B  (Ref#11444T)  Unmounted, new hoses, new 20 hp Kohler engine, new hydraulic pump, main winch rebuilt (6000 lbs), 32' mast, spudding beam, new stabilizing jacks, new valve body with 2 spare ports, no cable  Price:  $22,500

SWINGER MODEL 45 PUMP HOIST  (Ref#2245T)  Mounted on 2009 Ford 750 extended cab, 325 hp Cummins, 31,000 GVW, locking rear end, manual transmission, air brakes, dual winches with 2 speed hydraulic motors, hydraulic wire winder, 4 leveling jacks, multiple toolboxes, 2 heavy duty pipe racks  Price:  $68,500

NATIONAL 500C PUMP HOIST  (Ref#8353Tb)  Built 1998, mounted on 1998 Ford F800 truck, 60,000 miles, 6570 rig hours, (2) toolboxes,   Price:  $47,500

MONITOR M42  (Ref#7009T)  mounted on 2004 Ford F550 4-wheel drive truck  Price:  $25,000

MONITOR M35  (Ref#10394Na)  30,000# capacity, sandline, aux line, mounted on International 1600 4-wheel drive truck with gas engine, PTO, Smeal fail-safe brakes on both drums, 130' of new 5/8" line, no tools  PRICE REDUCED:  $33,500

MONITOR 34  (Ref#5692Tb)  Mounted on 5-ton 2 wheel drive truck with gas engine, double set hydraulics, 34' mast, sandline, older truck but runs  Price:  $26,500

MONITOR M34  (Ref#10394Nb) 8,000# single line capacity, mast with 2' extension (37' total height), 130' of new 5/8" line, mounted on International 1600 4-wheel drive with gas engine, no tools  Price:  $37,500

MONITOR PUMP HOIST  (Ref#11045T)  (similar to a P7), 35' mast, mounted on 1999 Ford F450 4 x 4 truck with 7.3 Powerstroke diesel engine, PTO, mainline, sandline, 9' bed, 6 speed manual transmission, 243,000 miles, working condition  Price:  $29,500

MONITOR 34  (Ref#2668T)  Mounted on 2005 International 4300 truck, 42' mast, sandline, no cathead, 2 rear leveling jacks  Price:  $37,500

MONITOR 33  (Ref#2520Ta) Manufactured 1980's, mounted on 1990 GMC Topkick with gas engine, 2 wheel drive, no remote, no sandline or cathead, 2 rear hyd leveling jacks  Price  $27,500

MONITOR M33 (Ref#3693N) telescopic 33' mast with remote, mounted on 2000 Ford F250, located Canada    PRICE:  $30,000 CDN

MONITOR M33 PUMP HOIST  (Ref#9321Tb)  Mounted on 1999 Ford F350 2-wheel drive truck, V10 gas engine, auto transmission  Price:  $22,500

MONITOR M33  (Ref#13491T)  6T hoist completely rebuilt, new hydraulic hoses, pins and bushings.  Mounted on 1997 Ford F450 2wd truck 7.3 diesel engine, 11' service body, 123k miles  Price:  $26,500

MONITOR M33 PUMP HOIST  (Ref#10784T)  no sandline, standard mast, mounted on 1997 Chevy dually with diesel engine, toolboxes, 2 rear hyd leveling jacks   Price:  $25,000

MONITOR M33  (Ref#3696T)  Manufactured 1970's, unmounted, no sandlne, 33' mast, allnew parts  Price:  18,500

SHOP BUILT PUMP HOIST (SIMILAR TO MONITOR) (Ref#7039T)  Mounted on 1989 Ford F350 truck, 2 wheel drive, straight V6 gas engine, 28' mast, utility body, no sandline, no remote,  needs new tires, 172,000 miles  Price:  $15,500

G & R 400 PUMP TRUCK   (Ref#6504T)  Mounted on 1986 International 1900 truck with 6.9L diesel engine, 24 cfm air compressor, walking beam, drive casing with 350# hammer, good for 2 – 4" well development, leak in hoist control valve  Price:  $22,000

G & R 1200 PUMP HOIST  (Ref#5178T)  unmounted, (2) 4" pistons, fabricated to fit on dually truck, leveling jacks  Price:  $12,500

MONITOR PUMP M33 HOIST  (Ref#2294Rc)  Unmounted, manufactured 1972  Price:  $5,500

FLEETMASTER PUMP HOIST  (Ref#13058T)  Walker beam, 375 gal water tank, mounted on 1986 Ford F600 truck, 2 jacks, toolboxes  Price:  $20,000

2 TON PUMP HOIST  (Ref#158N) 1974, mounted on 1989 International truck, diesel DT360 International engine, spudder attachment, excellent condition  Price:  $37,500 PRICE REDUCED: $29,500

CYCLONE PUMP HOIST  (Ref#1697T)  Mounted on 1988 Ford F600 single axle truck with in line 6 diesel engine, electric parking brake, 6000# capacity, 3/8" sandline, 90% tires, pintle hitch, 22.5k GVW, service body 5 years old, rack for liner bailers and drop pipe, free fall with brake, remote, wire racks2 rear hydraulic jacks, ready to work   Price:  $37,500

CYCLONE F40 PUMP HOIST  (Ref#8537T)  Mounted on 1973 Chevy 3/4 ton 4 x 4 truck, 350 Chevy engine, no sandline, no cathead, 30' mast, approx 52,500 miles  Price:  $17,500

CYCLONE 30 PUMP HOIST  (Ref#5688T)  Mounted on 1987 Chevy 1 ton truck, 350 cu in 4 bolt main, currently working  Price:  $14,000

SMEAL 3T  (Ref#7720T) Manufactured 1999, mounted on 1999 Dodge Ram 3500 truck, new PTO, no sandline, no cathead, standard mast  Price:  $29,500 PRICE REDUCED: $26,500

SEMCO S6000 (Ref#1223T) Manufactured 1988, mounted on 2009 Dodge Ram 3500 4 x 4 truck with diesel, hydraulic rams, no cathead or sandline, wired remote, 20'L x 5'W x 5'H – 2,500#,  one owner, Price: $45,000

MONITOR M-33 (Ref#11730R) unmounted, hydraulic pump, no cathead, no sandline  Price:  $10,500

WANTED:
SMEAL 50T - SMEAL R36 - SMEAL R20, SMEAL R12, SMEAL 12T
SEMCO S30000 - S25000 - S20000
PULSTAR P38000 - P29000 - P20000 - P12000

 

For additional information contact Maryann at (516) 536 7375 - rigs@sunmachinery.com