DRILLING RIGS
SURPLUS RIGS LOCATED IN ROCKY MOUNTAINS
(will sell separately)
1985 SPEEDSTAR 150K (Ref#11081Na)
Depth rating: 5,000' with 4-1/2" 16.60 drill pipe
Manufactured 1986, Reworked (cost: $100,000), Cleaned and painted blue and white
2’ sub base and work platform, 60’ mast hydraulically raised and lowered, single rod pipe loader
Allow 47’ working space above table
7,500# auxiliary winch, 4000# auxiliary winch
Mounted on 4 axle carrier, 4 hydraulic leveling jacks
Powered by Cat 3408TA, 450 hp diesel engine, Allison 6 speed transmission
150,000# pullback, Maximum torque 140,000”/lb @ 0-100 rpm, pipe racking boards stands single 30' pipe/collars
King 3" ID 75 ton swivel,
2" x 3000 psi choke manifold
25 gpm triplex water injection pump
Price: $485,000
PRICE REDUCED: $360,000
1985 GARDNER DENVER 2500DD (Ref#11081Nb)
Gardner Denver double drum with 18,000# single pull on each drum, 18" air clutches, kelly and sand lines both on 6" lines, Martin Deck weight indicator
70' x 140,000# derrick with derrick board, stands and doubles
Detroit Series 60 (425 hp_ engine
18" Gardner Denver rotary table with 5 speed transmission, with 8" sub base
Conventional 75 ton 3-1/2" Gardner Denver swivel, 39' x 5-1/4" hex kelly
Price:
$570,000 PRICE REDUCED: $530,000
- SOLD
1978 GARDNER DENVER 14W (Ref#11081Nc)
Depth rating: 1500' with 2-7/8" 10.40 lb drill pipe
Gardner Denver triple drum, powered by 350 hp Cummins engine, 45,000 lb max pullback capacity, Twin 25 ton 4-line blocks with bailing auxiliary drum
52' x 45,000# free standing hydraulically raised and lowered derrick, pipe racking board stands double 20's
Gardner Denver 5 x 6 mud pump, Gardner Denver 600 cfm/250 psi air compressor
10" GD retractable rotary table w/5 speed transmission, 0 - 150 rpm
3" King 35 ton swivel, 4-1/4" x 24' hex kelly
Chain pulldown, work platform
Price:
$240,000 PRICE REDUCED: $210,000
1980 GARDNER DENVER 15W (Ref#11081Nd)
Depth rating: 2000' of 2-7/8" 10.40# drill pipe
Gardner Denver triple drum powered by 350 hp Cummins, 60,000# max pullback capacity, twin 30 ton 4 line blocks with bailing aux drum, Martin Decker weight indicator
52' x 60,000# free standing hydraulically raised/lowered derrick, pipe racking board stands double 20's, derrick ladder and flourescent lights
Gardner Denver 5-1/2 x 8" mud pump, Gardner Denver 600 cfm/250 psi air compressor
Gardner Denver 10" retractable table with 5 speed transmission 0 - 150 rpm
3" King 35 ton swivel, 4-1/4" x 26' round fluted kelly
Price:
$290,000 PRICE REDUCED: $260,000
1977 GARDNER DENVER 2000 (Ref#11081Ne)
Depth rating: 3000' with 3-1/2" 13.30 lb drill pipe
Double drum drawworks with 75,000# max pullback, powered by 400 hp Cummins engine
Twin 50 ton 6-line blocks, hydromatic brake, dual catheads and Martin Decker weight indicator
58' x 75,000# free standing hydraulically raised/lowered deerrick, pipe racking boards stands double 20's, derrick ladder with full protection cable and flourescent lighting
Gardner Denver 5-1/2 x 10" mud pump
Gardner Denver 10" retractable rotary with 5 speed transmission 0 - 150 rpm
3" King 35 ton swivel, 4-1/4" x 34' hex kelly
Price:
$310,000 PRICE
REDUCED: $280,000
1987 CHICAGO PNEUMATIC C700 (Ref#11081Nf)
Depth rating: 1,000' with 4-1/2" reverse ciruclation pipe, or 1500' with 4" conventional drill pipe
5,000# auxiliary winch, rig powered by Cummins 600 HP engine,
34' free standing hydraulically raised and lowered derrick, 60,000# maximum pullback capacity
Top head 0 - 135 rpm @ 50,000 in/lb torque, 2-1/2" King swivel
Price:
$230,000 PRICE REDUCED: $195,000
SHOP BUILT HOPPER RIG 3500’ DEPTH CAPACITY (Ref#2106N)
Hopper double drum drawworks,
200 hp Detroit diesel, Hopper 67’ free standing mast with sliding and adjustable crown,
(2) 50 ton 3-sheaves (6 line/blocks),
17-1/2” rotary table, 4-1/4” hex helly, 50 ton Gardner Denver swivel,
Price: $125,000
PRICE REDUCED: $115,000
WATSON 3000 (Ref#765N)
Manufactured 1985,
3 piece kelly bar, 80’ drill depth,
Mounted on 4 axle Crane Carrier with 350 hp Cummins diesel engine
Price: $175,000
PRICE REDUCED: $165,000
WALKER NEER 32 SPECIAL CABLE TOOL RIG (Ref#834N)
trailer mounted, Waukesha propane deck engine, twin pole mast,
running condition
PRICE: $40,000
The above rigs were in operation until the contractor went out of business.
Sun Machinery Corp.