CRANE BARGES FOR SALE

INLAND CLASS BARGE WITH CRANE (Ref#1088f) 250 X 72 X 15, w/Manitowoc 4100W Series 2 crane (with a Series 3 ringer configuration), 540 lb/ft2 deck load, 1816 GRT, 544 NRT, 24 watertight compartments Price: $2,600,000

125’ x 48’ x 7’, rake bow, square stern, (3) 22” square x 60’ long spud, 8’ x 16’ below deck house, Northwest 190D 100 ton crawler crane, 110’ of lattice boom, 100 ton capacity on deck

American R20, 100’ x 50’ x 8’, spuds (2) 36” diameter internal wells, 129’ boom, hoist power 353 Cat plus twin disc converter, generator/swing: 333 Cat, rigging 8 part; 2 part, cable 1-3/8”, 5’ freeboard, 8,444 gal fuel capacity, 650 gal day tank, built 1958 Price: $550,000

Diesel Clyde Model 20 – 20 tons @ 65’, 100’ x 40.1’ x 9’, 2 internal spuds, 65’ boom plus 32’ gooseneck, hoist power: Cummins 855C 350 hp w/twin disc series converter, generator power: Cummins 855C 360 hp w/ (1) 50 kw 250 V D.C. (Swing); (1) 40 kw 250 V D.C (80” Magnet), swig 60 hp 17,50 rpm, air controls, clearance A-frame to dick 40’6”, 19,956 gal fuel capacity, day tank 400 gallons, 1-1/8” holding and closing cable, 1” boom, built 1962 Price: $350,000

90’L x 25’W x 7’D, (2) 16” spud wells, (2) 14” x 40’L spuds, two dum Detroit diesel spuds winch, 35 ton Koehring crawler crane w/Detroit 471, 80’ boom, shipyard tip Price: $125,000

Additional equipment available at extra cost: 3,000# pile hammer, clam bucket, work float, 3 drum spud winch $150,000

(2) CRANE BARGES (Ref# 908RA&RB) 90’ x 40 x 9’, 1969, 5’6” approx draft full ballast, CLYDE 20DE crane, 65’ boom, 32’ jib, 12V71 Detroit Diesel, electric motor swing power, 3^rd engine on dog house stbd side used for power generation for magnet, electric air compressor motor 5hp, pneumatic operation from compressed air at 120PSI various operating pressure between 80-90 PSI, air actuated spring brakes released with locking mechanisms pneumatic lock releases in cab. Located in Maryland. Price: $600,000

(2) CRANE BARGES (Ref# 908RC&RD) Clyde model 20 barge mounted crane, 18 ton on 2-part, can be rigged for 25ton below the jib with 5 part block. Located in Florida. Price: $600,000

LINKBELT CRANE BARGE (Ref#908RE) 1982, 180’ x 52 x 11, 722 GT / 216 NET, welded steel constructed deck barge with (4) approx. 36” diameter spud wells, raked bow and stern, (2) skegs flat bottom, deck and straight sides, below deck barge is arranged with (4) transverse watertight bulkheads and (2) longitudinal watertight bulkheads. Located in Virginia. Price: $800,000

Self-propelled crane / hold barge, Built 1909, The Netherlands, 42.04 x 6.36 mtrs, 2.14 mtrs depth, 0.88 mtrs draft (empty) 2.10 mtrs (laden), freeboard 0.04 mtrs, deadweight 277 tons, hull material steel, thickness report 2006, cargo capacity 197 m3, hold dimensions 14.08 x 4.93 x 2.83 mtrs, crane Hitachi, type KH-125 (built 1984, overhauled & installed in 2002, crane capacity max 35 tons, equipment 2x spud poles 8.5 mtrs each + 2x extension for 3.0 mtrs each hydraulic poew pack for 15 tons vibrohammer (included) driven by Ford diesel engine. Personnel basket, grabs dredge grab 2x polyp grab + spares, clamshell, propulsion single screw, main engine Scania type DS11, output 300hp at 1800 rpm, gearbox Masson type AFC reduction 4.5 : 1, bow thruster is driven by DAF type 1160 DKA 220hp, Auxilliary 1 John Deere type 3029D driving 30 kVA alternator, Auxiliary 2 Deutz type 4FL912W driving 38 kVA alternator, bow thruster De Gerlien-van Tiem 360 degrees bow thruster (new 2002) driven by DAF type DK116 220hp, tank capacities fuel oil: 3.7m3 fresh water 3.0m3, Nav./comm equipment 2x VHF, GOS echo sounder, radar (not filled yet), class Dutch shipping inspectorate ADNR certificate available, Position: the Netherlands Price: €460,000 (Euros)

1999 MANITOWOC 777 (Ref#C1): 200 ton, cummins 6CTA8.3L turbo diesel, 180’ main boom, 30’ jib, new paint. Located in Indiana. Price: $690,000.

1999 MANITOWOC 222 (Ref#C2): 100 ton, cummins 6CTA8.3L turbo diesel, 160’ main boom, 30’ jib. Located in Pennsylvania. Price: $435,000.

1998 MANITOWOC 2250 (Ref#C3): 300 ton, cummins N14 turbo diesel, 200’ main boom, 40’ jib, (2) drums, new paint, Located in Ohio. Price: $1,575,000.

2001 MANITOWOC 999 (Ref#C4): 275 ton, cummins 3176C-390 diesel, 200’ boom, 30’ jib, Located in South Carolina. Price: $1,160,000.

1975 MANITOWOC 3900W (Ref#C5): 140 ton, cummins diesel, 180’ boom, 2 drums, 30’ jib, Located in Illinois. Price: $395,000.

1996 MANITOWOC 888 (Ref#C6): 230 ton, cummins diesel, 200’ main boom, 30’ jib, Located in Florida. Price: $850,000.

1998 MANITOWOC 111 (Ref#C7): 80 ton, cummins 6CTA8.3L turbo diesel, 160’ main boom, 30’ jib, Located in Canada. Price: $325,000.

2004, engine: 0M502LA, drive: 10 x 8 x 10, gear box: Daimler G240 16, crane width 2.75m, MEGATRAK suspension, outrigger base: 7x8m, 75.597km mileage, 7.871 operating hours, 51m boom, 8m boom extension. Located in Europe. Price: $585,000

2008, 60m main boom, engine: DM OM 502 LA (380KW/517PS), drive: 10 x 6 x 10, gear box: Daimler-Chrysler G240-16 with EPS, crane width 2.75m, MEGATRAK hydropnematic suspension, outrigger base: 7.80m x 7.50m, 30.983km mileage, 10m swing-away fly jib. Located in Europe. Price: $780,000

80 ton, 160’ main boom, 40’ jib, block and ball, third drum, 13,885 machine hours, 1500 hours on re-man engine. Price: $325,000.

New build, 86m x 31.6m x 6.2m, lifting capacity 1200 ton, boom length 98m, hooks (2) 500 ton, (2) 230 ton, 4807 gross tonnage, 1442 net tonnage Price: $17,000,000

200 ton block, 15 ton hook ball, 130’ of #27 boom, 4100W SIII ringer attachment, equipped with 280’ of #27 boom, 50’ of #122A jib, 275,000# of auxiliary concrete counterweights, mounted on 160’ x 40’ x 8’ deck barge, renty only until July 2010 Cost: $75,000 per month

Built 2008, 185’ x 50’ x 9.5’, 140’ boom, galley/dining room for 12 men, (2) heads, showers, sinks. (4) 4500 lb anchors, winch: Clyde frame 7 five drum, winch engine: John Deere 6068 Tier III, torque converter: twin disk 10,000 Series hydraulic, pilot house, Wabco single lever air control, Miller XMT 350 welder, (2) Victor Journeymen burning rig, deck shop and storage: 25’ x 10’ with roll up doors and full tools, 100 kva Tier III gen set, located California Available for Charter

Crawler, built 1976, 150 ton capacity, 150’ main boom, Cummins NT350 diesel engine Price on Request

2 available, 1995, 150 ton crawler crane, equipped with 90’ #39 boom with open throat tip, Cummins NTA-855 engine, Vicon controls, electronic LMI, 37 kw generator, Ohio control box, AC cab, 100 ton hook/block, excellent condition Price: $510,000

52’ x 38’ x 5’, American 20 ton crane welded to barge, all cables, new within last year, very good running condition Price: $99,500 or best offer – US Gulf Coast

36.52m overall length x 36.30m breadth x 03.20m depth, 606 gross tonnage, steel hull, Heavy lift: 35 ton @ 22.5m, 25 tons @ 29.5m, Aux. 16 ton @ 37.0m. Anchor system: (2) 2.5 ton anchors, (5) 3.5 ton anchors, (1) 2.5 ton anchor. Generator: Main power 1000 kva, output 220/440 volts. Aux power: 90/80 kva, output 220 volts. Capacities: fuel 50 ton,s potable water 20 tons, (1) aluminum tender workboat, surface welding and cutting gears, underwater welding and cutting gears, hydraulic power pack, water marker. Accommodations: 40 berths, messroom, head with shower, fully A/C and heat, VHF, radar and GPS, located Asia Price: $1,650,000

Built 1971, 150 ton, Cummins diesel engine, 2 winches, 120’ boom, located Midwest Price: $189,000

VESSELS WANTED

Let us know if you have any vessels, barges, dredges or related equipment for sale.

Keep us in your files for any equipment that may become available in the future.