Please contact Christopher Murray at rigs@sunmachinery.com for more information.
SOILMEC R208 (Ref#7145Na) Year
1998, on tracks, 120’ depth with reg. friction Kelly bar and locking Kelly bar
Price: $175,000
PRICE REDUCED: $145,000
IMT 802 DRILL RIG (Ref#775Nt)
Manufactured 1992, Deutz BF6L913 diesel engine, 80 KNM torque, interlocking kelly bar to 28m drill depth,
400 - 1200 mm diameter, mounted on Fiat 693 6 x 4 truck from WWII (can be removed before shipment)
PRICE: € 78,000 EUROS
WATSON 5000 CRANE ATTACHMENTS (Ref#15760P)
2 units available, 1980’s, includes controls, bridge and double Kelly bar, well maintained by large drilling contractor Price: $65,000 (includes delivery to anymajor port in 40’ container)
(5) additional Kelly bars available at extra cost
CLAM ROTARY BASED BORED PILING RIGS (Ref#15746P)
Three available, maximum diameter 900mm to 27 meters deep, complete with 2X Kelly bar, augers and cases for each unit, good working order
Price: £30,000 UK Pounds (Approx $49,000 USD)
PRICE REDUCED TO 22,000 UK Pounds (Approx $32,000 USD) or take all (3) units for 55,000 UK Pounds (Approx $80,000 USD)
Year 1985, 4 stage-29m kelly bar, 6,100 daNm torque, 26,500# pulldown force, GM453 diesel deck engine, mounted on Soilmec crawler undercarriage
Price: 75,000 UK Pounds REDUCED TO 60,000 UK Pounds (Approx $87,000 USD)
SOILMEC R10 (Ref#111N)
Manufactured 1991, 13,000 working hours, mounted on Cat base 225, extendable crawler min width 2500mm, rotary head torque 100 kNm, (1) 4 x 11.5 friction Kelly bar, (1) CFA kit, very good condition, engine and pumps are perfect. Price: €150,000 (Euros)
SOILMEC SR-40 (Ref#2023Na)
Manufactured 2008,
approx 600 hours, Cat C7 deck engine, 118,000 ft/lb toque, 50 ton operating
weight, 4 x 10.5m interlocking kelly bar Price: $590,000 REDUCED TO
$550,000
MAIT FUNDA (Ref#15761N)
Manufactured 1989, equipped with 4 section Kelly bar for 23m drill depth and CFA kit, GM353 deck engine, 8,000 kgm (58,000#) torque, well maintained and ready to drill, to be shotblasted and painted Price: £58,000 UK Pounds (approx $85,000 USD)
HANS ENGLAND PILING/WATER WELL RIG (Ref#15762N)
Complete with Hans England high torque power unit, mounted on 1992 Ford Iveco tandem axle truck with only 30,000 miles, complee with (3) lengths of auger string of 400mm, 500mm, and 600mm Price: £37,500 UK Pounds (Approx $55,000 USD)
CASAGRANDE HYDROMILL FD60 (Ref#76N)
Brand new and unused, Casagrande C850NG base carrier, D7F undercarriage, Deutz TCD engine, 2015 V08 power 440kw (589 hp). (1) set x 4 cutting wheels 700mm, head depth 41m. Submersible mud pump 450 m3/hour and mud pipe 1500mm. Casagrande K250 Cummins engine (194 kw) power pack. Bentonite mixer 12/15 m3/hour, 1200 litres tank, 11 kw centrifugal pump with electric motor. Desander Casagrande D500 (2) hydro cyclones 500mm, capacity 500 m3/hour. Base carrier as lifting crane 90 tons capacity c/w top, base and insert 2 x 6m booms Price: $3,750,000
KLEMM 806-3 (Ref#1355Na)
Manufactured 1999,
8000 hours, Deutz diesel engine, 50’ 150’ drill depth, 7” – 9-5/8” diameter,
non-standard extras include winch, double head, 2 gallon oiler, 4 cylinder water
pump Price: $180,000 REDUCED: $130,000
REVDRILL 44HD (Ref#457N)
Manufactured 2008, very low hour unit, only 10 holes drilled, mounted on Cat 330L (3,500 hours on excavator) Price: $165,000
IMT AF-280 (Ref#775Nh) Brand new, year 2009, 4/48m Kelly bar Price: €900,000 (Euros)
IMT AF-80 (Ref#775Ni) Manufactured 2004, 6400 working hours Price: €130,000 (Euros)
IMT AF-100 (Ref#775Nj) Manufactured 2005, 4600 working hours Price: €150,000 (Euros)
IMT AF-120 (Ref#775Nk) Manufactured 2003, 9800 hours Price: €175,000 (Euros)
IMT AF-120 (Ref#775Nm) Manufactured 2003, 8500 working hours Price: €175,000 (Euros)
IMT AF-180C (Ref#775Nn) Manufactured 2005, 5800 working hours Price: €290,000 (Euros)
IMT AF-220 (Ref#775No) Manufactured 2008, 2600 working hours Price: €460,000 (Euros)
IMT AF-250 (Ref#775Np) Manufactured 2002, 12,300 working hours Price: €350,000 (Euros)
SOILMEC R15 (Ref#775Nr)
Manufactured 1990, approx 10,500 hours, 4 x 10.5m friction Kelly bar, Price: €100,000 (Euros) (Approx $125,000 USD)
SOILMEC R12 (Ref#775Nq)
Manufactured 1988, with 4 x 10.5m friction Kelly bar and CFA kit Price: €90,000 (Euros) (Approx $112,000 USD)
CASAGRANDE C6 (Ref#775Ng)
Manufactured 2001, approx 7000 hours, long mast with 6500mm stroke, T10006V (1,300 kgm, 6 speed) rotary head, includes 2 ses of 306mm clamps (new set costs approx 15,000 Euro) and timer for grouting Price: €80,000 (Euros)
CASAGRANDE M6A (Ref#775Ns)
Manufactured 1998, Deutz 4 cyl turbo deck engine, rotary head T1000-6V, double clamps (254 mm diameter), 4,000mm mast stroke, very well maintained Price: €65,000 (Euros) (Approx $81,000 USD)
CASAGRANDE C-60 (Ref#3085N)
Manufactured 1996,
approx. 6,700hours, C-60 crane HT 55 mast, HT36 drill head with 265,000 ft/lb
torque, 110,000 lb. crowd, 44,000 lb single line pull, Mercedes diesel 367 hp
Model OM442A, tracks hydraulically extendable 11’5” to 16’5”, Includes one
regular Kelly 3 x 36’ interlocking, spare Kelly 3 x 31’ friction, in 2000
undercarriage was replaced with new and larger Casagrande C-800 crawler base
Price: $800,000 REDUCED TO: $475,000
Available at additional cost: HT 55/20 dual rotary head (180,000 ft/lbs. torque on drill tool, 440,000 ft/lbs on outer casing drive) and 2 smaller sized kelly bars specifically adapted for the dual rotary head Price: $40,000
IMT AF-125 (Ref#775Na)
Manufactured 2008, only 480 working hours, interlocking Kelly bar 4/38 Price: €335,000 (Euros) (Approx $415,000 USD)
CASAGRANDE M6-A1 LONG MAST (Ref#775Nc) Manufactured 2003, 4000 working hours, rotary head T 1600, max torque 1,800 kgm, double clamps dia max 254 mm, rotary stroke 4,000 + 2,500mm, with hyd gearbox pulldown, rods charger for no. 2 rods 3000mm, complete jet grouting kit Price: €115,000 (Euros) (Approx $142,000 USD)
CASAGRANDE M6-A1 (Ref#775Nd)
Manufactured 2003, 4000 working hours, rotary head T 1600, max torque 1,800 kgm, double clamps dia max 254 mm, rotary stroke 4000mm Price: €100,000 (Euros) (Approx $125,000 USD)
CASAGRANDE M9 (Ref#775Ne)
Manufactured 2003, 4520 working hours, rotary head T 1600, double clamps dia max 305mm, rotary stroke 6500mm, rods charger for no. 02 rods 3000mm Price: €155,000 (Euros) (Approx $125,000 USD)
CASAGRANDE C4 (Ref#775Nf)
Manufactured 2006, 1200 working hours, rotary head T800, remote control Price: €105,000 (Euros) (Approx $130,000 USD)
TEXOMA 700 II (Ref#7145Nc) Year 1981, Detroit 453 deck engine, mounted on 1985 Ford LTL 9000 truck with Cummins 250 hp engine (165,489 miles), 60’ digging depth, 4” Kelly bar Price: $85,000
TEXOMA 270 (Ref#7145Ne) 2-1/2”
Kelly, 20’, mounted on Cat D4D dozer with tilt, power shift, Ramsey service
winch, Gearmatic Model 11 Price: $30,000
PRICE REDUCED: $22,000
"BAUER STYLE" DOUBLE WALL CASING AND TOOLING.
Brand new - Exported from China
To view these files Abobe Reader is required (click link below to download)
SPECIFICATIONS
AND PRICE LISTS
HUTTE DRILL HBR-605D (Ref#6620N)
Manufactured 2003,
3,025 hours, Price: $205,000
PRICE REDUCED: $170,000 - or best offer
6 available, can be used as a crane or can be sold complete with leaders for driven steel/concrete piles, all in excellent working condition, ready for work Price crane only: £40,000 UK Pounds. (Approx $58,000 USD) Price crane with leaders: £45,000 UK Pounds (Approx $66,000 USD)
BSP 335T ROTARY/CFA PILING MACHINE (Ref#15735P)
Manufactured 1997, hours 5200, fully refurbished, 1.2 meter dia to 25 meters and 2m dia to 60 meter rotary mode. Complete with Kelly bar for 60 meters. Complete CFA kit, Cummins 335 HP diesel deck engine, 73,000 Kg approx. overall weight, 245 KNM / 188,000# torque.
Price: £165,000 UK Pounds (Approx $242,000 USD)
BSP 625 CRANE MOUNT (Ref#15736P)
Manufactured 1988, complete with Kelly bar, good working condition Price: £20,000 UK Pounds (Approx $29,000 USD)
Manufactured 1999, fully refurbished, clamps and choice of rotaries or drifter
Price: £55,000 UK Pounds REDUCED TO 47,000 UK
Pounds (Approx $68,000 USD)
SOILMEC SM400 (Ref#15745P)
Two
available, Manufactured 1998 and 2000, both with new paint and in excellent
condition, complete with clamps and choice of drifters Price:
£50,000
UK Pounds (Approx $81,000 USD) REDUCED TO 47,000 UK
Pounds (Approx $68,000 USD)
Manufactured 1980, 28,848 hours, mounted on Ackerman H12B Model 1980, engine replaced 2001, Classic 4T hammer with 800mm stroke Price: £85,000 UK Pounds (Approx $123,000 USD)
Manufactured 1990, spare auxiliary winch, rigged for driven cast in-situ piling operations with 5T hammer Price: £160,000 UK Pounds (Approx $231,000 USD)
Manufactured 2000, refurbished, new paint, 6200hours, complete with double clamps, ideal drilling, grouting and anchor machine Price: £47,000 UK Pounds (Approx $68,000 USD)
Manufactured 2002, 40’ kelly, John Deere diesel engine, mounted on 1996 Volvo tandem axle truck, air ride, Cummins diesel engine
Price: $115,000
PRICE REDUCED TO: $90,000
